Check out is not working in jdevloper10g (Subverion10.1.3.41.57 )

Similar Messages

Business Catalyst Check Out scripts not working on IE8 or lower

Hi there Guys,
I have currently fixed a lot of incompatibilities on the Business Catalyst check out,
but I am currently working on compatibilities for IE8, 7 , 6 I have managed to load most of the plugins all
over the site but I am having problems on the Check Out area of the site.
I am not sure what can be blocking the scripts from loading!!
SITE: www.simplyscotlandshop.com
I am struggling to get a proper debuging using IE10 so If there is any testing reliable tool for IE older versions that's be awesome.
Thanks Now

Hi,
Best way to confirm that the issue either lies with BC or local is to remove the template from the shop and see if the issues resolves.
If working fine then I would suggest looking into your template to see what conflicts might be causing this. If the issue doesn't resolve even w/o the template assigned then I would recommend reaching our direct support ASAP so they can investigate and test further. -> http://helpx.adobe.com/contact/index.html (Select Business Catalyst and proceed)
Here's a neat page with debug tool references that you might want to seek to help determine conflict in various IE versions.
- http://samuli.hakoniemi.net/debugging-and-testing-in-internet-explorer-made-easy/
Kind regards,
-Sidney

Subversion Check Out Suddenly Not Working

The error only occurs for 'http' subversion URLs; 'https' subversion URLs are not impacted.
This is drying me nuts for last 5 days!!!
Out of the blue 5 days ago, SVN access from my MacBook Pro failed: I cannot access any SVN (i.e. not in our University or open source projects etc).
The error obtain when performing 'svn co', or any other svn commands is shown below.
This is same message is obtained irrespective of the svn repository (i.e. it is something due to my Macbook)
$svn co http://anonsvn.internet2.edu/svn/i2mi/branches/GROUPER_1_6_BRANCH/
$svn: OPTIONS of 'http://anonsvn.internet2.edu/svn/i2mi/branches/GROUPER_1_6_BRANCH': Could not read status line: connection was closed by server (http://anonsvn.internet2.edu)

I'm experiencing the same problem on MBP running 10.7.5. Some other guys are reporting a similar problem at http://superuser.com/questions/472084/svn-error-when-connecting-from-macbook
The svn+ssh connection and https connections work all ok. My other machine, running the same OS version does not have the problem.
An interesting thing is that I tried to run svn on a Ubuntu inside a virtualbox. It is experiencing the same results: svn ls http:// does not work; svn ls https:// works.
A note at http://stackoverflow.com/questions/12808500/svn-could-not-read-status-line-error -on-checkout suggests that the culprit could be the Cisco VPN client. I've recently upgraded to Cisco AnyConnect 3.1, and at about the same time svn ls http:// stopped working.

Macbook Pro 2011 DVI HDMI out does not work with TV when the power cable is connected

My Macbook Pro (Early 2011) DVI HDMI out does not work with TV when the power cable is connected. If get the blue screen and then can use the macbook but nothing is displayed on the TV. If i go into display I can see that there are two screens but nothing displayed on the TV. If i take the power cable out at this point the TV shows the second desktop as expected. If i then reconnect the cable, the screen flickers, as though it is being affected by the power cable, and the screen goes blank on the TV. Only if i remove the DVI cable do i get the blue screen again. If i remove the power cable and reconnect it will do it every single time, so i cannot see it being a TV issue or a minor glitch.
I have had this working previously but at the minute it seems to not be playing ball....any thoughts
Thanks
Dan

BUMP
Any ideas?

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

DVI video out suddenly not working.

That's basically it. I have a 23-inch Cinema HD Display at home and at the the office. Suddenly the video out is not working with either of them. The displays control panel lists the external display, so the system is detecting the connected display.
There is nothing wrong with the displays. I connected an old PowerBook and they light up fine. With my MBP, the power light lights, but nothing is displayed on the Screen.

there's a somewhat similar thread "external monitor stopped working" with no answers
my 17" Studio display works as 2nd mon on other computers
my dvi out does work with a vga monitor and adapter, of course :))
i'm using the dvi to adc adapter -- could this be involved somehow?
my laptop display goes blue when i plug in the external monitor as it should, but the 2nd monitor never wakes up, turns on, etc.

System.out.println not working in Tomcat-4.1.x

System.out.println not working in Tomcat-4.1.24. Any settings has to be enabled??? I am using tomcat for Solaris

I think u can use ServletContext.log() to output info instased.

I have Iphone4 and my Iphone wifi button greyed out mean not working, Please suggest what need to do.

I have Iphone4 and my Iphone wifi button grayed out mean not working, Please suggest what need to do and i am using ios 6.

Please ask your question

TS1702 Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Hello, I,m having problems with Polish spell check. It says in iPnstruction that this App (pages) should show my writing mistakes. Check spell button is on but but check spell is not working. Need help Please.

Upgraded to iOS5.1 and now video out is not working. How do I fix this?

After upgrade to iOS 5.1 the video out is not working! Anyone have this problem? Is there a fix for this?

OK so I went to the Apple Store and they said my cable was a third party cable. We tried an apple cable and it worked! So Apple changed the pin out configuration on the OS 5.1 upgrade so only Apple cables will work! So I had to shell out another $40.00 to get that cable!

Zoom in and out is not working in folders after installing Lion OS

Zoom in and out is not working in folders after installing Lion OS. Did not understand why?

Feature has been removed AFAIK. As far as zoom is concerned, the new operating system has been..whatever the opposite of optimized is...pessimized?

Help. MacbookPro9,1 w/ 840 SSD not booting after 10.9.2 update. Drive checks out fine, and works well w/ 10.9.1

Hi Everyone.
My Macbook has been running fine on 10.9.1. When I installed the update, the computer won't boot up. It stays on the apple logo. I tried Safe Mode, resetting PRAM/NRAM, Single User Mode etc., nothing.
I scanned and repaired permissions on the drive, but everytime the drive itself checks out fine. So I did a time machine restore, and everything works well (10.9.1). Figured it was just a fluke, so I attempted to update again. Same issue!
Booting in verbose mode gave me the following:
The only thing that I can think of from trying to read around in all the multiple posts is that maybe 10.9.2 doesn't like my SSD?

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
If you use FileVault 2, then before running the Installer you must launch Disk Utility and select the icon of the FileVault boot volume ("Macintosh HD," unless you gave it a different name.) It will be nested below another icon with the same name. Click the Unlock button in the toolbar and enter your login password when prompted. Then quit Disk Utility to be returned to the main screen.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode.
*The linked support article refers to OS X 10.9 ("Mavericks"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Exchange 2010 "event id 403/401 The physical consistency check" Backups does not work...Critical!!

Hi,
At this moment our backups does not work. We have two error on the event viewer;
Exchange 2010 sp3 version 14.03.0158.001
We have only one server Exchange 2010 with two databases for users...
Event id 401;
Instance 1: The physical consistency check has completed, but one or more errors were detected. The consistency check has terminated with error code of -106 (0xffffff96).
Event id 403;
Instance 1: The physical consistency check successfully validated 629126 out of 1110272 pages of database '\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy33\exchangedb\global\global.edb'. Because some database pages were either not validated or failed validation,
the consistency check has been considered unsuccessful.

Hi Javier,
From your error description, I recommend you do the following steps for troubleshooting:
1. Please run CHKDSK and restart server.
2. Run a Database level Mailbox repair request.
What's more, here are some useful threads for your reference.
Create a Mailbox Repair Request
http://technet.microsoft.com/en-us/library/ff625221(v=exchg.141).aspx
Database Backup Failing with Event ID 2007, 9782, 401, 403, 254
http://social.technet.microsoft.com/Forums/en-US/4c8eccbf-435a-43ef-b3f6-0de5096413ee/database-backup-failing-with-event-id-2007-9782-401-403-254?forum=exchangesvravailabilityandisasterrecoverylegacy
Hope it helps.
If you need further assistance, please feel free to let me know.
Best regards,
Amy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Checking In Devices Not Working - Apple Configurator

Hi,
I have checked out devices to specific users in configurator. They have completed work on those iPads, and are shown as assigned in Configurator.
However when I try to check the device back in, configurator does not create a device backup - doesnt retirve the documents and does not properly check the device back in to my machine.
What can I do to fix this issue?
Many Thanks
Martyn.

What's the exact error message that you get from Configurator? I was having very similar issues.
Are the devices iOS 7? If so, when/how were they upgraded to 7?
One thing I would check for sure is for an iCloud account. Go into Settings > iCloud and see if "Find my iPad" or "Find my iPhone" is turned on with a valid iCloud account. If that's the case, you need to remove that iCloud account from the iPad before you can check the sucker back in.
Hope you end up with a solution.

Left Outer Join Not working in BI 7.0 Infoset

Hi All,
I am working on BI 7.0. I have to create a report where I have to display the Target values from a target DSO against the transactional data (Operational data).
I have a DSO where for a subteam value target has been set up on different KPIs.
In the Info Cube, I have transactional data on daily basis per subteam. I have to show the actual and target values.
I have created an Info Set using Target DSO and Daily operational cube, so that I should able to compare the target and actual values of KPIs, for all the subteam values (From DSO, irrespective of whether the data is available in cube for those sub team).
I have used Outer Left Join in the Info set (DSO on left side), but I am unable to see the desired results. It is working just like an inner join.
Any Idea why the Outer Left Join is not working? The DSO has only one fey field called subteam on which I have set outer left join.
Regards,
Amit

Hi,
did you solve your problem? because I have the same issue right now: the left outer join doesn't seem to do its job.
Let me know if you have found a solution, it would be appreciated.
have a nice day,
Dominic

Check out is not working in jdevloper10g (Subverion10.1.3.41.57 )

Similar Messages

Maybe you are looking for