Check out the DROID 2 - video!

hey folks -
There's a new post over at the DROID Community blogs; check out the DROID 2 features video, and let us know what you think!
http://community.vzw.com/t5/DROID-Community-Blogs/Check-out-the-DROID-2-video/ba-p/265267
And let us know what you'd like to see in our next video or blog post!

Note that there are some other new printers that are compatible with the HP62/HP62xl cartridges...
Envy 5660
http://h20195.www2.hp.com/v2/GetDocument.aspx?docname=c04363466
Envy 7640
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04366923
Officejet 5740
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04363517
Officejet 8040 - this comes with Neat cloud based service and 1TB of storage
http://www8.hp.com/h20195/v2/GetDocument.aspx?docname=c04355608
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

Similar Messages

READ THIS FIRST: Check out the Developer Guide, other forums and Wikis

The Portal Content Development forum is one of the most-active forums on SDN, and many, many experts read it and can answer your questions.
Before posting, please check out the following sources of information:<ul><li><b><a href=http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm target="_blank">Portal Developer Guide</a> (2004) </b>and<b> <a href=http://help.sap.com/saphelp_nw2004s/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm target="_blank">Running an Enterprise Portal (developer guide)</a> (2004s):</b> This is THE source for information on portal APIs. All of the public APIs are documented here. </li>
<li><b><a href=https://wiki.sdn.sap.com:/wiki/display/EP>Portal Wiki</a>:</b> See below.</li>
<li><b>This Forum:</b> Someone probably has already asked your question. Before adding another post, check if you can find a similar post that has sufficient information to help you. </li></ul>
<h3>Other forums</h3>
<li>Employee self service questions: https://forums.sdn.sap.com/forum.jspa?forumID=267</li>
<li>Visual Composer questions: https://forums.sdn.sap.com/forum.jspa?forumID=58</li>
<li>Web Dynpro for Java questions: https://forums.sdn.sap.com/forum.jspa?forumID=52</li>
<h3>More on Wikis</h3>The recently announced Wiki functions of SDN will, over time, be a great start for getting information about portal development and implementation...
The main wiki portal page is <a href="https://wiki.sdn.sap.com:/wiki/display/HOME/Portal">here</a>.
Please read this before asking a question in the forum - believe me, there are not many new questions being asked!
There is quite a bit of repetition in forum questions, and maybe if people are directed to the wiki page as a first step, it may make it easier to watch this forum.
The Wiki concept is all about sharing within a community, so feel free to modify the content - more accurately 'our' content - and maybe start some other pages, such as one about modifying logon pages - a fairly consistent topic in this forum
Edited by: Michael Nicholls on Feb 18, 2009 9:48 AM
Edited by: Michael Nicholls on Feb 18, 2009 9:49 AM

Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
Given the settings" irq's are a major",part of directing traffic and power? example:
Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored: no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
I can honestly say my system is error free and running like a dream.
xp 2500 barton 333
creative sound 5.1gamers.
512 mb kingston ram 400 mhz
boadband either onboard.
MSI 5700 128 mb ddr
Setting are:
163 fsb
mult of 11
ddr 333
video memory clock down to 450mhz
3d clock to 390mhz
The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.

How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.

You can check the file prefs.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and remove the line(s) related to that extension (procon.password).

The workflow could not check out the list item.

Hi Guys,
I have a workflow enabled on document library and it needs to started manually.
Whenever user starts workflow manually, gets following error:
"the workflow could not check out the list item. Make sure the list item is not checked out." list item is not checked out & this workflow was working smoothly earlier.
OutCome: The workflow operation failed because the workflow lookup found no matching item.
I have gone through below links:
https://christopherclementen.wordpress.com/2014/05/23/oob-approval-workflow-error/
https://social.msdn.microsoft.com/Forums/office/en-US/f673d0f6-92eb-4057-95ff-ed3cb7790360/the-workflow-operation-failed-because-the-workflow-lookup-found-no-matching-item?forum=sharepointcustomizationprevious
Any clue on this?
Thanks, Nilesh

maybe check out for editing documents setting is turned on so wokrflow needs doc to ce cheked out before proceding and user might not have permission to do that.
please refer below link:
http://sharepoint.stackexchange.com/questions/32399/workflow-error-the-workflow-could-not-update-the-item-possibly-because-one-or
http://community.office365.com/en-us/f/154/t/243062.aspx
http://stackoverflow.com/questions/1272957/document-checked-out-in-sharepoint-when-workflow-starts
Please mark as answer if you find it useful else vote for it if it is close to answer..happy sharepointing

Why does RCS prompt me to check out the .XPJ file when I open RoboHelp HTML?

We just upgraded from X3 to X5 and began using RoboSource
Control. We currently have a dedicated server machine and 1 client
machine (we'll be adding 3 more client machines once I resolve all
issues with this one). I have working folders set up on each
machine so I can open the Help projects with RoboHelp HTML.
The issue here is that I often receive the following prompt
in a dialog box when I open a Help project in RH HTML:
"To add version control information to this project, the
files in the list below need to be checked out from version
control. Do you want to check out these files?" (The only file
listed is the .XPJ file.)
I only seem to receive this message after I have opened that
particular Help project on the other PC. E.g., I open Help project
A on the Server. If I close it, I can re-open the Help project on
that machine multiple times without receiving the message. However,
if I then open Help project A on the client machine, I'll get the
prompt to check out the XPJ file. If I check it out, I can then
re-open the Help project on that machine multiple times without
receiving the message. Of course, if check in the XPJ file from the
client machine, I'll get the prompt on the Server machine to check
it out the next time I go to open it up from there.
Thoughts?

Dirk,
Thanks for the suggestions. I was prompted to check out the
XPJ for one of our Help projects this morning. I clicked
No (to NOT check out the XPJ file from the database), then
selected the
File Status tab, right-clicked on the XPJ file, selected
Show Differences... and discovered that the XPJ file in the
database had the following version control related text, whereas
the XPJ file in the working folder on my SERVER machine did not
(the working folder copy on my CLIENT machine matched the file in
the database):
Note: This code appears between a <miscproperties> line
and a <CompileOptions> line (both XPJ files had these two
lines).

Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested i

Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested in upgrading to Windows 7 currently.

There are still retail packs of LR 4 to be found out there - for example, on EBay. It's just important to be careful whether it's a full version, an upgrade, or a student + teacher version. And to be certain it's genuine, and has a serial number which has never been activated before. The serial number that you get with that, should work with any 4.x version of LR, on either MacOS or Windows. And it will almost certainly be heavily discounted compared with the previous price direct from Adobe.
Of course the other way is to upgrade to Windows 7 SP1, which should also be available discounted, and thus eke out the life of an older PC (I personally would not go to Win8 in such a case). Maybe pick up some RAM also, if that's a problem, provided you can do so cheaply (since that will be simply thrown away in due course, when you get a newer PC),
Using LR4 instead of LR5 you do miss out on a few nice features, as well as potentially the Raw support and lens profiles for more recent camera equipment.
LR 4 is obsolete as far as Adobe is concerned. They will not sell a Serial Number for it.

[svn:fx-trunk] 12025: Switching out the old video component for the new video component that uses OSMF .

Revision: 12025
Revision: 12025
Author:   [email protected]
Date:     2009-11-19 17:48:04 -0800 (Thu, 19 Nov 2009)
Log Message:
Switching out the old video component for the new video component that uses OSMF. Also fixing RSL issue with OSMF because a change in flex-config.xml accidentally got overwritten. Also fixing a bug caught during the last code review where you would set the volume on the VideoPlayer, but the volumeBar wouldn't be made aware of that change.
Switching out the video component results in many API changes. The changes are highlighted below:
Class name changes:
- spark.primitives.VideoElement is being renamed to spark.components.VideoDisplay
- spark.components.mediaClasses.StreamingVideoSource is renamed to park.components.mediaClasses.DynamicStreamingVideoSource
- spark.components.mediaClasses.StreamItem is renamed to park.components.mediaClasses.DynamicStreamingVideoItem
VideoDisplay/VideoPlayer event changes:
The new video component's events are:
- bytesLoadedChange : org.osmf.events.LoadEvent
- currentTimeChange : org.osmf.events.TimeEvent
- durationChange : org.osmf.events.TimeEvent
- mediaPlayerStateChange : org.osmf.events.MediaPlayerStateChangeEvent
The old video component's events were:
- close : spark.events.VideoEvent (removed)
- complete : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
- metaDataReceived : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
- playheadUpdate : spark.events.VideoEvent (replaced with currentTimeChange)
- progress : flash.events.ProgressEvent (replaced with bytesLoadedChange)
- ready : spark.events.VideoEvent (replaced with mediaPlayerStateChange)
VideoDisplay/VideoPlayer property changes:
Renames:
- maintainAspectRatio:Boolean has been renamed to scaleMode:String and rather than true/false, it now access 4 values: none, zoom, letterbox, and stretch. See the enum class org.osmf.display.ScaleMode.
- playheadTime:Number has been renamed to currentTime:Number
- playWhenHidden has been renamed to pauseWhenHidden, and it's "tense" has been reversed. So playWhenHidden = true correlates to pauseWhenHidden = false. Also, before we would only pause when the video component was explcitly set to visible=false, but now we detect if the video components or any of it's ancestors have been hidden.
- totalTime:Number has been renamed to duration:Number
New properties:
- bytesLoaded:Number This is a new property not available on the old video component
- bytesTotal:Number This is a new property not available on the old video component
- loop: Boolean this was a property added a while ago on the old video component but not in the original video player spec
- mediaPlayerState: this is a new property that details the state of the video component. See org.osmf.media.MediaPlayerState for all the possible values.
- seekToFirstFrame:Boolean (pending PARB approval) - This is a new property available on VideoDisplay/VideoPlayer. When autoPlay = false, if seekToFirstFrame is set to true, then we will connect to the server to start downloading the video, figure out the size of the video and resize appropriately, and show the first frame of the video. If seekToFirstFrame is false, then no connection to the server is made, there's no implicit size for this video, and the first frame will not be show automatically. By default the value of this property is true. In the old video component, when autoPlay = false, we always has the same behavior as seekToFirstFrame = true. Now it is controllable through this property. Eventually, (not for Flex 4.0), we will most-likely have support for a thumbnail source or a splash screen so the video's preview will show up without making an unneeded connection to the server. The property name may change depending on PARB.
Other changes:
- autoRewind: The default of autoRewind is now true instead of false
- enabled: before we paused the video when the video component was explicitly set to enabled = false. Now we pause the video when the video component or any of it's ancestors have been disabled.
VideoPlayer-only changes:
- videoObject:flash.media.Video property is now a new property on VideoPlayer. It was previously only on VideoDisplay.
- The skin states for the old VideoPlayer were: connectionError, disabled, disconnected, loading, playing, stopped, connectionErrorAndFullScreen, disabledAndFullScreen, disconnectedAndFullScreen, loadingAndFullScreen, playingAndFullScreen, stoppedAndFullScreen. The new skin states are: uninitialized, loading, ready, playing, paused, buffering, playbackError, disabled, uninitializedAndFullScreen, loadingAndFullScreen, readyAndFullScreen, playingAndFullScreen, pausedAndFullScreen, bufferingAndFullScreen, playbackErrorAndFullScreen, disabledAndFullScreen
DynamicStreamingVideoItem property changes:
- bitRate:Number renamed to bitrate:Number
DynamicStreamingVideoSource property changes:
- initialIndex has been added to DynamicSteramingVideoSource
- live:Boolean has changed to streamType:String which accepts values: live, recorded, any. See the enum class org.osmf.net.StreamType for more info.
- serverURI:String renamed to host:Object
- streamItems:Array has changed types to streamItems:Vector.
ScrubBar property changes (THESE CHANGES ARE NOT DONE YET, BUT SHOULD BE DONE SOON)
- bufferedStart will be removed
- bufferedEnd will be renamed to loadedRangeEnd. This property name still may change depending on PARB.
- bufferedArea skin part needs to be renamed. Probably will be renamed to loadedArea. PARB still deciding.
QE notes: -
Doc notes: -
Bugs: -
Reviewer: Kevin
Tests run: checkintests
Is noteworthy for integration: Yes
Modified Paths:
    flex/sdk/trunk/frameworks/flex-config.xml
    flex/sdk/trunk/frameworks/projects/spark/defaults.css
    flex/sdk/trunk/frameworks/projects/spark/src/SparkClasses.as
    flex/sdk/trunk/frameworks/projects/wireframe/build.xml
    flex/sdk/trunk/frameworks/projects/wireframe/src/spark/skins/wireframe/VideoPlayerSkin.mx ml
    flex/sdk/trunk/frameworks/spark-manifest.xml
Added Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin.mxml
Removed Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/VideoPlayer2.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/mediaClasses/StreamItem.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/mediaClasses/StreamingVideo Source.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/primitives/VideoElement.png
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin.mxml
    flex/sdk/trunk/frameworks/projects/spark/src/spark/skins/spark/VideoPlayerSkin2.mxml

I've got that same problem: iPod Touch 2nd Gen, Apple Component Cables, and an HD TV.
The funny thing is, the cable works fine with an iPod Classic (160 GB) but not for the iPod Touch. Can anyone explain why that is?

Adobe Story Updated - Check out the latest features!

Check out the latest updates to Adobe Story: http://www.adobe.com/go/adobestory
A new build has been posted and the improvements include:
-            Tagging
-            Smart type options for Character elements
-            Keyboard Shortcuts
Tell us what you think of Adobe Story by clicking the link below:
http://www.surveymonkey.com/s.aspx?sm=GmlrDsH9X6HEnk89LT5nWw_3d_3d

I am probably one of the few people who was driven here by the chance to keep my laptop running in Ubuntu Linux (9.10) and still have access to some sort of accurate screenwriting tool. I have just today in fact received a very nice note from the folks at FinalDraft stating that Linux is likely never going to be in their future even though it seems like asimple matter as it actually installs seemingly correctly using Linux and WINE (latest as of this date) but, it will not accept the registration info which is prompting the few Linux users I know interested in screen writing to use alternate and rather poor methods (like Celtx) that simply are cludgy or only work occasionally correctly if at all. There are templates for OpenOffice but they aren;t perfect and have yet another learnign curve. All this brings me here.
The point of jumpint into this thread in the forums is that although I was able to manually install AIR using help from another link, and it did seemingly later update itself, I am unable to install the desktop version as the installer fails for me. It opens a new html doc and asks about installing Story, attempts a download and then after the download seems to complete, it fails.
My question is then, why not just toss a package out there we can access without going through all the installer and download manager hassles. Give me a link that works please and I will download it and install it myself.
As of now, I have inported and adjusted and tagged a short 12 page script ( I work in experimental narrative short films) but I must have internet access for this to work for me. This means I cannot fully test the application as I am unable to test it offline. This is due to downloading and I believe, updating issues.
There is a lot of talk in other areas about feature sets, font types for editing vs printing and other "tools". To be honest with you, I am happy to use it as it is right now with nothing else added or needed from my end. This is working for me on Linux and is my only option.
Thanks,
Sean
(PS, I'm willin got beta test for Ubuntu 9.10 Linux)

Is it possible to see SQL in SQL-T without having to check out the mapping?

Hello guys, Is it possible to see SQL in SQL-T without having to check in the mapping? At my work they use SQL-T a lot and in SQL query tab they use a lot of SQL so I was wondering if you can see the query without checking out the mapping? Let me know. Thanks

Hi All, I am facing an issue wherein Decimal value of 0.01 is getting converted to 0.00. Let me brief you about Source-Target Types Source - Flat FileTarget - DB2Powercenter Version - 9.6.1 HF2 Issue - Field in Source Flat file is defined as Number(5,2). Corrosponding field from DB2 Target Table is defined as Decimal(5,2). Mapping is simple straight forward mapping with 1:1 loading from Source to Target. Now, my Source File contain data as below0.010.020.0312.01 When I execute mapping DB2 target Table gets loaded with all records. Value from corrosponding field from DB2 target table is - 0.000.020.0312.01 As you can see, value of 0.01 is getting converted to 0.00 where as all other values are working fine as expected. As a quick fix I have applied to_decimal(source_field,2) before loading into Target. Could anyone explain if this is a bug in Powercenter or there's some other issue. If I think its a rounding issue then how come value of 0.02 is getting processed correctly? Please advise. Thanks,Rajesh Agrawal

After userA check out a page, edit the page and save, Sharepoint prompt userA have checked out the page

In one of site collection at our SP2013 farm, we have "SharePoint Server Publishing" site feature and "SharePoint Server Publishing Infrastructure" site collection feature activated.
One of user (UserA) create a page in a page library. The new page is marked as "checked out by UserA". It is fine.
Then UserA open the page -> edit page -> key in something and "save". Then the page prompt him "The file Pages/subfolder/test001.aspx has been modified by i:0#.w|test\userA on 8Aug2014 xx:xx:xx" and ask him to choose "Leave
this page" or "say at this page". The date time is exactly the time he was editing the page.
Whatever he choose will save the page and return to "View" mode (non-edit mode).
It is not the only problem. When userA want to edit the same page again and save, it prompt him that "The page could not be saved because your changes conflict with recent changes made by another user. If you continue, your changes will be lost."!
When userA choose continue or "check out". Follow screen show up:
What can we do? In summary, userA cannot edit a page because userA have checked out! We have tried for different users have exactly same issue.

We are having the same problem, the one thing we have found is if we use the Save Icon on the top right hand side of the page in the ribbon (next to follow), that Save works just fine. What is causing the issue is when trying to use the Save Icon on
the left hand side of the ribbon that has the dropdown options to 'Save', 'Save and Keep Editing' or 'Stop Editing'. It doesn't matter if you just click on the main Icon or choose any of the dropdown options, they all cause issues with the pages.
Thoughts?
Nick Hurst

Unable to Check-in and Check-out the documents

Hi All,
When I checkout files from share point, I am unable to locate them on my file system. I have T440S Windows 7 (64 bit ).<u5:p></u5:p>
I couldn’t locate the checked out files neither in Downloads nor in My-documents/SharePoint Drafts or My-documents.
<u5:p>Thanks</u5:p>
<u5:p>Samar</u5:p>
<u5:p></u5:p>
Samar

And you did check the option Save in local draft folder during check-out?
Kind regards,
Margriet Bruggeman
Lois & Clark IT Services
web site: http://www.loisandclark.eu
blog: http://www.sharepointdragons.com

Double spaces after checking out the code

Hi Guru's,
I am seeing double spaces in my code after checking out in cvc.
Could anyone please help me how to remove the spaces.
Thanks.

Like this: Re: Error starting at line 1 in command ?
Might be more appropriate to post in SQL Developer Forum.
Regards
Etbin

Check out the New York Times Reader - Powered by AIR & TLF

Be sure to check out today's release of the AIR-based New York Times Reader:
http://www.nytimes.com/timesreader
The NYT Reader was built using Adobe AIR and the Text Layout Framework. It is one of the most innovative uses of TLF we have seen and we're proud to have it as the largest showcase of TLF and text in Flash Player 10 to date! It is an excellent demonstration of TLF's reflowing text, multiple columns/containers, and top notch typography features.
Want a peek inside the development of the Reader application? Check out issue #4 of Adobe XD's Inspire publication:http://xd.adobe.com/

bnjr86 wrote: There have been times when I've walked in there, that I really don't want to deal with VZW anymore and just take my business elsewhere.
I wonder if another provider would really be much different? Read some of the other carrier forums - seems to be the same story everywhere.
I'm not disagreeing with you - I've found that I am usually more informed about Verizon policies and procedures than some of the reps in our local store.

E3 2015: Checking out the latest in gaming audio tech from Turtle Beach

My last booth visit at E3 2015 was with Turtle Beach to check out all their latest innovations in gaming audio headsets and equipment. As a gamer, having a good pair of headphones is vitally important. The strength of Turtle Beach is that they offer a range of products in all price ranges, so you can pick the pair best suited to your needs. My meeting with them also helped me discover an innovative new project they are working on, which could revolutionize how we listen to television.

Almost a month.. nobody?

Sounds out the original video start playing when I have muted them

In my video I set the volume of the original video to 0% and added a song for the entire edited video. When I play the video on big screen, on certain parts, it still plays the sounds of the original videos until I pause it and continue it. Even if I export the video the original sounds play through.Disturbing What can I do to get these sounds out of it entirely?

I would guess that you are using either fast motion or slow motion. There is a bug in iMovie 09 which makes random audio artifacts when you set the speed slider to anything other than 25%, 50%, 100%, 200%, 400%, 800% (i.e. the Presets with the tick marks).
If you choose another speed, like 139% or 58%, you will get tha audio problems.
Change your speed to one of the tick marks and that should solve the problem.

Check out the DROID 2 - video!

Similar Messages

Maybe you are looking for