Check plugins page never loads.

Beginning today, I can no longer watch YouTube videos without them freezing. They will usually start with an ad that doesn't play or load. Then if I wait a few seconds or click on the video, the video just starts playing. Then, the video will play for a few minutes before freezing. It doesn't start again if I reload. I have uninstalled and reinstalled Firefox, Flash, Shockwave, RealPlayer, and Java. I have disabled hardware acceleration. I have tested and verified that Flash, Shockwave, and Java are working. I installed the add-on to make all YouTube videos play in HTML5 because when I went to check that the HTML5 video worked fine and the non-HTML5 video didn't, but the rest of the YouTube videos still don't work and give me the same problem. When I go to check if it is a problem with my plug-ins, the page to check my plugins never loads. It either simply stays a blank page or it will say it's checking and never brings back any results.

Try to create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Similar Messages

Whenever I open the browser, the check plugins page always opens in a second tab. How can I make this stop?

Whenever I open my browser, the check plugins page keeps opening, even after I have updated all of my plugins.
How can I make this stop?

That is a bug with blocklisting plugins that has been fixed.<br />
You can correct this issue by forcing the file blocklist.xml to update or wait until Firefox updates the file.<br />
That update will remove the severity="0" flags in the file that cause the problem.
See:
* [/questions/832793?page=2#answer-198407]
* http://forums.mozillazine.org/viewtopic.php?p=10899869#p10899869
* [https://bugzilla.mozilla.org/show_bug.cgi?id=663722 Bug 663722] - The blocklist output is including severity="0" where it shouldn't be

IPlanet HTTP 404 not shown , Page never loads

Hello,
We have one of the Iplanet Web Server 6.0 SP2 running on Solaris.
Whenever a http request is made to the web server for a non existing file, the Browser (web Server) does not responds with a default HTTP 404 Error page. The Browser page never completes the loading.
Ideally following things should happen:
1) web server should respond with a HTTP 404 error page.
2) There should be an entry in access logs for this request
3) There should be an entry in error logs for this request.
All the above things do not happen at all.
May be due to this a connection remains open for every such request.
After a period of @ 2-3 hours the server hangs.
Other instances are running fine and also respond with a 404 page for such request.
Any idea where can I check whether the server has its default http 404 page intact, or the default page itself is not there?
Any solution for this problem?
Thanks.

No actually not the log files but the error responses files. But if you changed them you would know about them ;-)
I would find out with truss -wall -rall -eaf -p <pid of the webserver> so see why he keeps on putting an error. (for the pid you need to check all the process i don't which one you need).
To enable a customized error response, follow these steps:
1. From the Class Manager, click the Content Management tab.
2. Click Error Responses.
3. Choose Entire Server from the resource picker to apply your >change to the whole class, or navigate to the document root for a >specific virtual server, or to a specific directory or within a specific >virtual server.
4. For each error code you want to change, specify theabsolute
path to the file or CGI that contains the error response.
5. Click OK.

PAP2t - web page never loads

Hello!
I am trying to update the configuration of a remote PAP2T via the management web pages.
The user is on the other end of a private link (a WAN user). I can ping her router's IP, her PAP's IP, and her PC's IP just fine. Calls are (mostly) working fine (which is why I need to make a tiny change to her config). However, I cannot use the management interface. when I enter the unit's IP, the page partially loads but never completes. Because of this, none of the navigation links at the top of the page will function meaning I cannot get to the setup pages I need and make the changes.
Can anybody shed any light on the situation? I vaguely remember seeing something about MTU settings or something, but I cannot find that info at this time.
TIA.

You might try reducing the size of your pc's tcp receive window as outlined at the end of this thread
http://forum.voxilla.com/linksys-sipura-voip-support-forum/spa3102-cannot-access-voice-admin-advanced-internet-25964.html

Driver page never loads

The driver page here http://support.hp.com/us-en/drivers/selfservice/hp-envy-m6-k000-sleekbook/5375388/model/5390695 never loads. It keeps buffering (square animation keeps spinning) but no drivers show up. I tested on 2 PCs and 3 browsers. Perhaps there is an alternate link?

Hi there , Thank you for visiting the HP Support Forums and Welcome! This is a great site to get answers and ask questions. Since the driver's page is not loading, I would suggest trying the HP Support Assistant. Here is a link. Just download and run the application and it will help with the software and drivers on your system at the time of purchase or that need updating. Thank you! Have a great day!

Rented 2 movies, watched one, second one kept downloading for 3 days and finally failed. I was charged for it, it never downloaded, cannot be found in "Available Downloads" and "report a problem" page NEVER loads, no email contact. Please help

Rented 2 movies, watched one, second one kept downloading for 3 days and finally failed. I was charged for it, it never downloaded, cannot be found in "Available Downloads".
When you go to "Report a problem" next to the item (Great Gatsby) on the email invoice or on the online account - it takes you to online support - if you elect problems with iTune downloads the page NEVER opens... no email contact. Please help

This is bad - I have an Apple automated response that they got my report on 12/6, 12/10 and 12/14, and I haven't heard anything from them since the 6th when I got one reply that told me to do things I tried before reporting the problem. Between the 6th and 10th I replied to their response 4 times and they ignored me, forcing me to report a problem with two more items that wont download but getting no response.
How do they get away with this kind of behavior, especially for someone with FIVE Core 2 Duo macs and thousands of dollars of of iTunes store purchases? I'm getting really ******.

After I updated, firefox crashes and pages never load. I can no longer open it completely.

I got a message that it was critically important that I upgrade firefox immediately. Which I did yesterday. Ever since then I cannot open firefox and my pages that normally load on start up just hang and hang. Sometimes after a couple of minuets I can get a partial page to load, but after a short time I get the bug and a message that firefox encountered a problem and had to close. I sent a crash report today after that happened.
I could barely get to this help page but eventually it loaded. I hope you can help me.

You can try to disable hardware acceleration in Firefox (you need to close and restart Firefox).
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.

Why does update plugin page never come back from checking my status? It just spins.

Using Firefox 22 on Acer Aspire on a dial-up internet connection. Computer alerted me that it could not view e-card and needed to update a plug-in/add-on and went to the Mozilla plugin check and updates page. It just spins, forever, without reporting back the status of my plugins. Tried clearing cache but made no difference.

What usually happens is that the page loads with the plugin list(s) blank, and as information is retrieved it slots them under up-to-date, out-of-date, and don't-know.
I don't know whether you ran into a temporary glitch, or whether the specific missing or outdated plugin was an issue.
Does it work any better to just load the page directly from a link?<br>https://www.mozilla.org/plugincheck/
If it's still not working for you, could you try the page in Firefox's Safe Mode? That's a standard diagnostic tool to bypass interference by ''extensions'' (and some custom settings). Your plugins will still be active and available for research. More info: [[Troubleshoot Firefox issues using Safe Mode]].
You can restart Firefox in Safe Mode using
Help > Restart with Add-ons Disabled
In the dialog, click "Start in Safe Mode" (''not'' Reset)
Any difference?

I cannot search in firefox. I try to search with google and yahoo. The page never loads and I get "Problem Loading Page", "The Connection Has Timed Out". Can anyone please HELP??????!!!!!!!!!

I cannot search for ANYTHING, I cannot click on items listed in the yahoo search page (the top ten trending search items) the page just won't load!

Since I looked everywhere for this answer and never found it I decided I needed to help!
1. GO TO THE TOOL BAR WHERE IT SAYS SAFARI AND CLICK TO BRING DOWN THE MENU OF OPTIONS, CLICK ON PREFERENCES
2.INSTEAD OF JUST CLICKING ON THE GENERAL TAB AND CHANGING THE SEARCH ENGINE LIKE EVERY OTHER STUPID SUPPORT TELLS YOU TO DO LOOK AT THE TAB THAT SAYS EXTENSIONS.
3. Chances are you downloaded something that was made by a third party to "enhance" your web experience but really they just screwed you over, YOU CAN CHOOSE TO SIMPLY UNINSTALL ANY EXTENSIONS PUT ON YOUR COMPUTER BY CLICKING INSTALL, BUT TO BE SURE THAT THIS IS THE ROOT OF YOUR PROBLEM IN THE SECOND COLUMN SIMPLY CLICK ON THE UNDERLINED NAME OF WHO THE EXTENSION IS MADE BY IF CLICKING THE LINK BRINGS UP A YAHOO PAGE THIS IS THE SOURCE OF YOUR ISSUES AND SIMPLY UNINSTALLING THIS WILL RID YOU OF THIS DUMB PROBLEM!!
HOPE THIS HELPS!!!!

I have a mac and the home page never loads properly. How do I fix this? I have uninstalled firefox, reinstalled it, have the latest version. It's weird.

This is what it automatically goes to: http://www.fv',.com/;CVC%27CV.....VVV%20VVVVVVVVVVVVVVVVVVVVV%E2%88%9A%E2%88%9A%E2%88%9A%E2%88%9A%E2%88%9A%E2%88%9A%E2%88%9A%E2%88%9A%E2%88%9A%E2%88%9A%E2%88%9A%E2%88%9AVVVVV/%27%27/;%27;%27;%27..LKMJNHGFTRDESWQ
This is what is displayed on the page:
Server not found
Firefox can't find the server at www.fv',.com.
Check the address for typing errors such as
ww.example.com instead of
www.example.com
If you are unable to load any pages, check your computer's network
connection.
If your computer or network is protected by a firewall or proxy, make sure
that Firefox is permitted to access the Web.

Did you check the home page setting?
*https://support.mozilla.com/kb/How+to+set+the+home+page
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

I am using 3.6 on a 2009 Powerbook running OS 10.5.8, and the New York Times home page never loads properly.

In earlier versions of Firefox, the Global edition loaded fine but the U.S. edition was a blank page with the normal left-hand text sidebar where it should be. Now the Global edition fails, as well.
To view the main flow of text, I have to scroll down 1.5 pages worth - and then the text looks normal.
Then, below the "Video" and "News from Reuters and AP" sections, there is another 1.5 full-page scrolls worth of blank page again. Then the "Inside NYTimes.com" section (with graphics properly placed) section comes up, followed by a 6" deep blank section.
My husband is a programmer, and can't figure it out.

Make sure that toolbars like the "Navigation Toolbar" and the "Bookmarks Toolbar" are visible: "View > Toolbars"
*Open the Customize window via "View > Toolbars > Customize"
*Check that the "Bookmarks Toolbar items" is on the Bookmarks Toolbar
*If the "Bookmarks Toolbar items" is not on the Bookmarks Toolbar then drag it back from the toolbar palette in the customize window to the Bookmarks Toolbar
*If missing items are in the toolbar palette then drag them back from the Customize window on the toolbar
*If you do not see an item on a toolbar and in the toolbar palette then click the "Restore Default Set" button to restore the default toolbar set up
*http://kb.mozillazine.org/Toolbar_customization
*https://support.mozilla.com/kb/Back+and+forward+or+other+toolbar+items+are+missing

When I open Firefox the check plugin page automatically opens. How do I turn this off?

Today when I started up Firefox an additional tab opened directing me to the plugin update page. I do not want this tab to always open when I start Firefox. How do I disable it?

I uninstalled Viewpoint Media Player (and the AOL IM client "AIM", since apparently that's what forced Viewpoint Media Player on to my system.)
Viewpoint Media Player is responsible for the plugin called "MetaStream 3 Plugin r4", and I believe this plugin is triggering Firefox to open the plugincheck page. It is not enough to disable the plugin, it must be uninstalled.
For me, after uninstalling Viewpoint Media Player, the "plugincheck always opening" problem then went away.

I just downloaded my Leopord onto my Macbook and I can't get into my Gmail account. It almost loads all the way and then stops. Also Facebook wont load all the way or keeps reloading and wont stop. The whole page never loads.

My computer isn't loading everything fully on Safari now. I can't get into my Gmail. It just stops loading.

Ok, first thing, why are you doing anything with WAMP or XAMPP when you're running a Mac? MAMP should be what you want unless you're not explaining part of what you are trying to do.
2nd thing, I haven't used MAMP in a while, but there are two possibilities for not seeing what you want to see once you have MAMP turned on. One possibility is that you already have "Web Sharing" turned on in your Sharing Preference Pane. If that is the case, port 80 will already be taken and you'll be seeing the default Apache install (files are stored at /Library/WebServer/Documents/). This would push MAMP to either not turn on it's web serving capabilities, or to push it to another port. The other possibility is that MAMP defaults to another port anyway. So instead of localhost, you might have to type in localhost:8080 or something similar. I believe the control panel that gets installed can take you to the currently MAMP-served page, and it can also help you change which port your serving on.
80 is the default port for web serving and the ONLY port that will let you get straight to the server without having to type in webaddress.com:port# instead of just webaddress.com.

Pages never loading or with errors

Hi. New mac user here and I don't want to be disappointed with my purchase. Since I started using safari I have had problems with pages loading. I look at a white screen more often than not and have to use the refresh button several times to get some pages to finally come up. I also notice a lot of pages coming up incorrectly or in list form. Any suggestions on how to make the program work better? maybe my settings are off? Thanks for your help.

Hi
Welcome to Mac Computing
It appears some Internet Providers DNS codes are somewhat inefficient for Safari 4, creating slow page loading. This may be true in your case.
Usually, this is remedies by adding DNS server codes to your Network settings.
To add the codes, go to System Preferences>Network. Click on your internet connection - either Ethernet or Airport, then "advanced". In the DNS panel enter on separate lines the following OpenDNS codes: 208.67.222.222 and 208.67.220.220. Select "OK", then "apply".
In the Network panel, if Ethernet or Airport (whichever you use) is not at the top of the list, click on the "gear icon" at the left bottom. Select "set service order". When the help box opens drag your connection type to the top of the list. Select "apply" when complete.
To be sure, unplug/wait 30 seconds/plug-in your cable box, and if you use Airport, your router.
Restart Safari.
Good tutorials here for familiarizing yourself with OS X.

Smart Setup problem, he never load the first page

Hello,
I got a EA6400 this week end.
the second one, the first one is on my mother house. And everything works good.
But with this one i got a issue .
I try to connect to the router with wifi ,cable,smartphone
Also try with firefox safari and chrome.
i try by the ip and by myrouter.local.
Between all this try, i reset the router by pressing the red bouton between 10 sec and restart the router after.
ach try, the first page load but never skip the "loading page" i wait for like 10 minute each time
But the page never load something. i can't press any "next" ou "back" button.
Any ideas ?

Try a different PC to see if it can access the web page.
PC 3rd Party Security Software Configurations
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
PC Web Browser Configurations
If IE 8, 9, 10 or 11, set compatibility mode and test again.
You may have a faulty unit and may need to be replaced...

Check plugins page never loads.

Similar Messages

Maybe you are looking for