Check Point VPN-1 Secure Client Software Compatibility w/ Intel iMac

Is this SW compatible with the new iMac? I'm trying to install a Secure Client SW but it stops in the middle of installation giving out only a general message - there were errors during the installation. Please help.
Thanks.

The CheckPoint VPN-1 Secure Client software is only compatible with Mac OS v 10.3 (Panther). I had the same issue and am waiting for CheckPoint to update the software.
Miguel

Similar Messages

  • Check Point VPN-1, no client settings

    Hello you all,
    First of all, sorry for any mistake 'cause I'm new both on Mac and on this Community. I have a question: Is it possible to set up a configuration manually so I do not need using the CheckPoint Secure VPN-1 Client?
    Thank you all,
    Regards,
    Fred

    The CheckPoint VPN-1 Secure Client software is only compatible with Mac OS v 10.3 (Panther). I had the same issue and am waiting for CheckPoint to update the software.
    Miguel

  • Software compatibility with Intel iMac

    I know it's rather early in the game, as it were, but does anyone know if Appleworks comes bundled with the new Intel iMacs. I don't see it listed, but could this be an oversight? Or is Apple getting away from it? I have used it for quite some time and I have many documents in Appleworks, but have no idea what I'd do with them if I got a new Intel iMac--sure, convert them, but to what? I don't look forward to having to "tweak" each doc, as I have had to do in the past when converting from one program to another . . . . Anyone know?

    Not yet. Peggy, one of the Appleworks mavens here, is at macworld and is going to try to find out for us.

  • Check Point VPN-1 SecureClient

    I've successfully installed Check Point's VPN-1 SecureClient. How do I invoke the connection to the remote PC? What's the OS X equivalent to Windows' mstsc? (I'm new to Mac.) Thanks.

    The CheckPoint VPN-1 Secure Client software is only compatible with Mac OS v 10.3 (Panther). I had the same issue and am waiting for CheckPoint to update the software.
    Miguel

  • Check Point VPN-1 with E71

    Hi, Im trying to setup VPN between Check Point VPN-1 R65 gateway and Nokia E71 device. I am using Nokia Policy tool which should generate a policy for the device. The policy includes user's certificate which is loaded via policy tool.
    My p12 certificate is generated by Check Point internal CA, but when Im trying to load the policy on the device, it fails with the error message "user certificate is not found".
    I converted Check Point p12 certificate into PFX certificate using Microsoft CAPI import/export. The output is a certificate which can be loaded into the device, however something happended with the signature and Check Point gateway refuses to communicate (error: invalid signature "empty")
    Any clues ?
    Thanks

    The CheckPoint VPN-1 Secure Client software is only compatible with Mac OS v 10.3 (Panther). I had the same issue and am waiting for CheckPoint to update the software.
    Miguel

  • Check Point VPN and local wireless network

    I need to use Check Point VPN to access a client's remote network. Now I cannot access my wireless printer or AirPort base station, even when I have disconnected and shutdown the Check Point client. I have removed the Check Point startup items from LaunchAgents and LaunchDaemons in order to restart without Check Point loading at start up.
    When I start in Safe Boot I can access the printer, but not with a normal start up. How can I find the other startup items that are interfering with my local wireless network?
    Am running Mountain Lion.

    Thanks for the reply.
    I found an installer in the Library as suggested.
    The installer did not install successfully.
    I trashed the installer, repaired permissions, downloaded the software again and was able to install successfully.
    I will not be able to test the connection until I am off the network but I am better off.

  • Check Point VPN

    I successfully installed Check Point VPN software and was able to connect but the policy update hung up.
    I elected to uninstall via the uninstaller option in the application.
    The uninstaller hung up but seemed to uninstall. The menu bar icon disappeared.
    I have been unable to reinstall the software from a new download. The installer seems to run successfully but no application appears in the Applications folder after rebooting.
    Any suggestions as to what might prevent reinstall?

    Thanks for the reply.
    I found an installer in the Library as suggested.
    The installer did not install successfully.
    I trashed the installer, repaired permissions, downloaded the software again and was able to install successfully.
    I will not be able to test the connection until I am off the network but I am better off.

  • Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

    Has anyone ever managed to solve this one?
    We have a problem on Windows 7 SP1 32bit systems.
    when we try to start the Check Point VPN-1 Securemote service we get this message:
    Error 1075: The dependency service does not exist or has been marked for deletion
    When we install a clean Windows 7 from an ISO the checkpoint client without any issues
    when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
    the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
    which is supported for Win7 x86
    other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
    we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
    We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
    it seems like the configuration is the same but we can't seem to find any online solution about this issue
    any suggestions?
    thanks
    Tamir Levy
    Tamir Levy

    Hi,
    Please check if all the dependencies services are running, if not, please start them:
    DNS Server
    Remote Procedure Call (RPC)
    Netlogon
    Server
    Workstation
    Any error message, please post back.
    You can also check solution in this article:
    http://support.microsoft.com/kb/269375
    Hope these could be helpful.
    Kate Li
    TechNet Community Support

  • L2TP over IPSEC to Check Point VPN-1 Power R62

    Does anyone succeded in setting up such scenario??
    I have ICA (Check Point build-in CA) root certificate and user certificate (both works on XP Pro) to my Keychains but when I try to use Certificate authentication from my 10.4.9 Internet Assistant -> VPN (L2TP) it says:
    "Certificate authentication cannot be used used because your keychain does not contain any suitable certificate."
    The truth certificates are in place and are valid. The usage field of the certificates states (2 5 29 15). Does anyone tried to face similar problem???
    Check Point VPN-1 is quite common in the firewall and VPN market and this is a little bit of a shame that its interoperability with built-in VPN client was not test by Apple

    No one?  I'd be happy to provide any more info if someone needs it, i'm just looking for some sort of direction.   I did almost this whole config by myself and i'm completely self-taught Cisco, so weird things like this really through me.
    Please help.  Thank you

  • CWMS End-User Client Software Compatibility

    I've been searching for a document that shows TAC supported end user client software options for CWMS.
    Does one exist - possible matrix that shows features/functionality?
    Minus the client software (presumably WebEx Meetings application) which is downloaded and automatically installed the first time the user joins a meeting and Jabber for Windows v9.1.2 or later.
    Thanks in advance

    Hello Dustin,
    Sorry for a slow response here. Have you looked into this?
    http://www.cisco.com/en/US/docs/collaboration/CWMS/1_1/b_Release_Notes.html#reference_327B79D2050B4744BB1343ADC2D5F4D5
    Kind regards,
    Srdjan

  • Re installing software on a Intel iMac vers. 4.1

    I have an 20.1 inch white Intel iMac, vers. 4.1, which came with 10.4.4 install discs. I have updated it
    through the 10.5 to Snow Leopard 10.6.8. BUT I have lost the OSX10.5 (Leopard) install disc
    and wonder if the machine crashes, and I have to install the software from scratch, would it be
    possible to install software directly from Snow Leopard, without having to use the original discs
    AND the OSX 10.5 discs first. Or do I have to buy the OSX 10.5 retail disc again, which is difficult to
    obtain these days, and is quite expensive if one finds one. Thanks for reply, Karel.

    Thanks, Kappy, that's excellent, I do have the Retail Snow Leopard. A load off my mind. All the best, Karel.
    Sorry, pressed wrong button, the 10 points (solved my question), should go to you.

  • No software update on Intel iMac?

    Hi all,
    Just got a new Intel iMac 20" and installed DVD Studio Pro 4 from the original DVD. Wanted to upgrade to 4.0.3 via Software Update but it doesn't show a single update available, not for Compressor, not Pro Runtime etc...
    Is this because it's an Intel iMac? Will there be other updates or do I have to wait for a universal binary version? Is DVDSP not officially supported on Intel?

    Without actually having an Intel mac to hand I can't be sure - but can you not go to the Apple website and manually download the update?
    http://www.apple.com/support/downloads/dvdstudiopro4updates.html

  • After installing Check Point's Endpoint Security VPN for Mac the mail on my macbook pro is not working anymore

    Open Connection Doctor reveals: Could not connect to this iCloud IMAP server... the server accepts connections on port 143.
    Have check email settings advanced tab, port 143 is entered and SSD un-ticked.
    Have uninstalled - restarted - etc.

  • VPN-1 SECURE CLIENT SUPPORT IN MAC OS 10.6 SNOW LEOPARD

    We use the checkpoint client VPN-1 at work - it works fine with Leopard. However it doesnt work with Snow leopard. Does anyone know what the story is here? has anyone been able to connect to the checkpoint firewall with a vpn-1 substitute? if so how?

    UndergroundRiver:
    I plan to erase and install when upgrading as I come from the Windows world and just can't understand the concept of not erasing and installing.
    Comparisons between Windows Operating Systems/machines and Macs and OS X are not necessarily apt. Even though we may not know exact details about Snow Leopard, we do know that Mac OS X offers several installation options, and the OS is designed to work within those parameters. In other words, an erase and install may not be appropriate or necessary under every condition.
    In terms of backing up, one is well advised to maintain an up-to-date and reliable backup at all times, of course. However, this is even more critical whenever one contemplates undertaking any major procedure, such as installation of the OS. If you would like specific suggestions about backing up, please do ask. You don't have to know where all the files are on your HDD. There are several excellent utilities that will do the work for you.
    cornelius

  • Adobe software - compatibility with intel Macs

    I've just bought a new iMac and hoped to be able to run my elderly Adobe software (InDesign 2 & Photoshop 7). I have enabled Rosetta but when trying to install both programs (from the original discs) it made reference to Classic (which I thought was only used to run programs that were native to OS 9). Needless to say, Photoshop did install but crashes every time I launch while InDesign fails to install at all. Has anyone else had this problem? Is there any way around it? Or do I have to buy new Adobe software. PS: I have successfully installed and are using, Microsoft Office from 2003.

    I am coming from the PC land, I puchased a IMAC QUAD 7 with lots 8 gigs of memory. I tried to install photoshop essentials I think 6 for the Mac it came with a new touchpad. It would not work it crashed immediatly. I installed Photoshop c4 extended, trial version for the Mac it works just fine its problem unlike extended for PC is not 64 bit It only sees 4 of the 8 gigs of memory. It works justfine. It can not open as many pictures at same time but I can only work n one at a time. I am also running Windows 7 64 bit with fusin ware 3. Windows works quiet well. You may be able to run your older photoshop( I believe they came with both Windows and Apple versions) Inside of your apple, fusion and say windows xp are less than photoshop. Just a thought.

Maybe you are looking for