Check+Printing+Sequence
I am looking for some guidance on Check Printing Sequence. Our specific problem is that we want checks over $50K to print first in our check run because these checks require signatures, but we are unsure of how to get this to work other than having two separate check runs and segregating that way. Can someone suggesta solution? Thanks in advance for your help!
I am receiving threw XML. I don't wana use XSD.
Similar Messages
-
AP Check printing setups for printing checks on your own
HI
I am wondering if there a good document which deals with AP check printing with MICR and signature on your own check stock
thanksRecently we started to deal with AP check printing in our organizatin. It was a daunting task with the information and resources scattered all over and missing critical pieces of information to make sense out of the whole process flow. We attempted to go through the AP check printing internally and succeded.
I decided to post the information for the benefit of people about the our experience
Check Printing Basics and Beyond for Printing Checks on Your Own
by
Sarma Chilukuri
This article deals with what is needed to get your own checks printed. It is a first attempt to uncover all the hidden rules that one should be aware to get your own checks printed. The first section deals with the basic AP check printing setup, while the 2nd half explores some of the flow of events that make it possible to print the check.
Part I â Basic Setup
AP Setup for check printing
There are multiple steps in the AP check printing. First set of steps deal with the AP side setups. The second step is to get the System side setups. The system side setup deals with printer setup and program options setups. The last step would be to make the print format files configured with the vendor provided escape sequences in the laser print format file.
Step 1: login as Payable Manager
Step 2: Bank Setup: Navigate to Setup: Payments > Banks
1. Make sure the Bank # etc are present
2. Tab to âBank Accountsâ, and make sure your account # has been setup
3. On the Bank Accounts screen, tab to the âPayables Documentsâ and verify that Payment format (E.g., COK Laser Format) has been entered. This âPayment format links to next section where we associate it to the right payment program.
Fig 1. AP Payment Bank Setup Screen
Step 3: Program Setup (Setup: Payments > Programs)
As we know there are only 5 formats 3 of which are âEver Green Laserâ (APXPBFE G|L|F) which are explained in the AP Users Guide. For your own form printing, you have to associate the format to APXPFEL (laser format) program. Also, the APXPBFEL or APXPBFEF call the APXPBFEG, which is the base program that pulls the data from oracle base tables. APXPBFEL is the one which allows us to print the checks with MICR and signature on a plain paper not on a pre printed stationery.
Fig. 2 AP Payment Format Setup Screen
Printer Styles, Drivers setup
The above process summarizes the AP Setup. As a DBA, the printer setup needs to be validated. The base install provides the right setup to some extent. But the differences in printers and print queues may add some complexity to the final configuration. The following section discusses the set up the base install provides and changes as needed.
Step 1. Login as system Administrator
Step 2: Style (Install : Printer > Style)
Look for the âPORTRAITHPLJ4LASCHECKâ. This one is associated with the SRW Driver Called, âAPLASPâ (AP Laser printer format).
Step 3: Driver (Install : Printer > Driver).
1. The âPORTRAITHPLJ4LASCHECKâ is associated with a âUser Driverâ of PORTRAIT for HPLJ4 and and a SRW driver of âAPLASPâ
2. Also notice that there is an Initialization string at the bottom of it. This initialization string gets called as pre-report trigger for the APXPBFEG program (APXPBFEG.rdf) file. It sets the kind of format it should be. Please see the Appendix A for details on these printer pcl code translations. The Initialization string was as follows:
Initialization: /eE/e&l0o2a7C/e(s0P/e(8U
Step 4: Printer type (Install : Printer > Register)
Each printer type is associated with a set of styles. Make sure the printer that was selected has the above style and its associated driver listed against that.
Fig. 3 System Administrator Printer Seups
Step 5: Program Setup (Concurrent > Program > Define)
This step holds the key for check printing. It is necessary to define whether you need the check on top followed by the Stub or the other way around. The way it is controlled is based on the APXPBFEG.rdf, the report definition file and the APLASP.prt (Printer Style associate with the Portrait laser check format SRW driver). The APLASP.prt file ($FND_TOP/reports) has two identical setups called the 100 series and the 200 series. Those identical sets of setups define where the MICR and signature print on the check. The following table lists the some of the codes in the 100 series. Please refer to Doc ID #146452.1 for complete details.
Fig. 4 System Administrator Concurrent Program Definitions
CODE # Code Definition
100 Electronic check activation string
101 1st Check #
102 2nd Check #
104 Deactivate check number mode string
111 Activate MICR line
112 MICR Deactivation / reset the printer head position
121 1st Signature
122 2nd Signature
141 Address font activation string
199 Return to default state string
Table 1. APLASP.prt -- MICR Activation Codes
The above code block repeats itself the same way in the 200 series. The decision to activate one way or the other controls the Check printing.
Step 2: Setting up the Option block
In the concurrent program definition for the APXPBFEL, there is an Options block in the middle. You need to list the codes that you want to activate. Please refer to Doc ID # 186640.1 for some explanation on these.
E.g.,
p_printer_code_mask="201,211,221,241" p_sig2_amount="" p_sig3_amount="" p_sig1_vendnum="" p_sig2_vendnum="" p_sig3_vendnum="" p_country_to_ignore="US" p_continuous_stationery="N"
Step 3: Output format is Text
Text format is sufficient, as the printer will pick up these escape sequences anyway.
Fig. 5 System Administrator Concurrent Program APXPBFEL Options Definition
UIPRINT.TXT, UIFONTS.ALI
One needs to be aware of a few more pieces in this puzzle. The UIPRINT.TXT identifies to the Oracle Applications the print queues that were setup. This file is needed to set your PCL / Post Script printer definitions. I did not have to really tinker with these files other than identifying the PCL and Post Script Qâs that were setup on the UNIX box.
Part II: Integrating all the pieces
The above setups are all documented in various articles. We need to understand a few more steps to see how all these pieces come together.
What you need to know about APXPBFEG.rdf
APXPBFEG (.rdf) is the report file which when called pulls the data from Oracle. If you open the APXPBFEG.rdf in the Oracle reports, there is initialization to the report called, SRW.Init. This will bring in the initialization string associated with the PORTRAITHPLJ4LASCHECK driver definition file. Also, please be very careful with this report format file. When you open it, there is small tiny empty block. in the first block which calls the printer initialization code 100/200 under the Format Mask (from APLASP.prt). If this portion gets changed or messed up, one can end up with some unexpected results. Each of those blocks like MICR, CHECK etc⦠have associated format triggers and printer codes.
Please make sure that the printer mask is properly handled. I noticed that the 200 series MICR (211) and Signature (221) printer masks were tied to 111 and 121 respectively. These should have been 211 and 221. The other place you need to be careful was the printer code before and after is proper.
For E.g.,
For the MICR, the âprinter code before and after columns â should be 111 and 112 (or 211 / 212) respectively while Format Trigger should reference to 111 (211).
Fig. 6 APXPBFEG rdf file printer mask and Format Triggers
The escape sequences in the APLASP.prt file for these codes will play the crucial role in getting our format around the report output that gets generated from the APXPBFEG program. Please refer to the explanation of these escape sequence codes in the APPENDIX A.
At this point when you run the program, you will see that the formatted output report file will have all the initialization strings and the output associated with that. You can compare the fields and verify the results. Let us closely examine the parts of the 111 and 121 where the micr and signature prints. The key to this to code the escape sequences the right way to get the associate MICR and signature print out correctly.
Fig. 7 APXPBFEG rdf file MICR printer mask and Format Triggers
Code 111 and Code 112 from the APLASP.prt file.
I broke the line into pieces to illustrate the exact escape sequence code.
Code "211"
Part 1: esc "&f0S" esc "&f0y0X" esc "&l0E" esc "&a0L"
Part 2: esc "(8M" esc "(s0p8.00h8.0v0s0b80T" --- This will be provided by the ROM
Cartridge provider
Part 3: esc "&k15H" esc "*p3215Y" esc "&a13.8C"
code "212"
Part 1 : esc "&f1x3x8X"
Part 2 : esc "&f1S"
Let us go over these 2 sets of codes carefully.
Escape Code Meaning Comment
esc "&f0S" Push Cursor Position
esc "&f0y0X" Define Macro ID 0 and Start Macro Definition
esc "&l0E" Define Top Margin at 0 Lines
esc "&a0L" Define Left Margin at Column 0
esc "(8M" 8M Symbol SetNote : As per pcl codes this happens to be Font Primary JIS Math 8 symbol MICR Part 1 : Provided by the Vendor from where you the ROM cartridge
esc "(s0p8.00h8.40s0b0T" {Fixed Pitch}{pitch 8.00 cpi}{Font Style 8.40}{Medium Weight}{Typeface 0} MICR Part 2 : Provided by the Vendor
esc "&k15H" esc "*p907Y" Set HMI = 15/120" Vert position = 907 Dots
esc "&a13.8C" Move to Column 13.8
CODE 112
esc "&f1x3x8X" {End Macro Definition}{Call Macro}{Delete Macro ID}
esc "&f1S" {Pop Cursor Position} At this point, the MICR gets printed
Table 2. Escape Sequences in APLAP.prt file Explanation
Fig. 8 APXPBFEG rdf file Signature printer mask and Format Triggers
The signature piece (221) has also similar meaning.
Escape Code Meaning Comment
esc "&f0S" Push Cursor Position
esc "*t300R" 300 DPI Graphics resolution
esc "*p1500X" Horiz position = 1500 Dots
esc "*p650Y" Vert position = 470 Dots
esc "(4B" esc "(s1p53v0s0b102T"esc "&f0S!" Symbol SetProportionalPoint Size 53UprightMedium WeightTypeface 102Push Cursor Position! Vendor gave the us esc "(4B"esc"(s1p53v0s0b102T!"Note: the ! when the it pushes the ! and that is where it prints the signature piece. The first part forms the symbol set , say (4B and the later part forms the signature font and ! is the piece. I took the ! from the above and let it stay with the 3rd part of it so that signature does not print twice.
esc "&f1S" Pop Cursor Position
esc "*p+121Y" Move down 121 Dots
esc "&f1S" Pop Cursor Position
Table 3. Escape Sequences for Signature in APLAP.prt file and Explanation
Summary
One can print their own checks using the above steps. This can work as a cost effective solution for small organizations where the budgetary constraints are tighter. We are successful in getting the AP Checks printed using the above method.
References
Metalink Doc ID # 186640.1, Different Payment Formats â¦
Metalink Doc ID # 60936.1, Step by Step Guide to Setup a Printer in Oracle Applications
Metalink Doc ID # 250543.1, How to Create An Initialization String for a Payable Check Format
Metalink Doc ID # 48680.1, Accounts Payable FAQ â Payment Batch, Check
Metalink Doc ID # 1074792.6, Exclamation Point (!) Prints On Check When Using APXPBFEL And Cartridge
Metalink Doc ID # 158486.1, APXPBFEL Evergreen (Long Laser)
Metalink Doc ID # 146452.1, Listing of p_printer_code_mask Default Values for APXPBFEL
Chapter 2, Oracle Payables user guide
Appendix A
APLASP.prt printer codes explanation
code "200" esc "&l0o2a6d66p8.000c2e1x0l63f1H" esc "&k12.00H" esc "(8U"
esc "(s0p10.00h12.00v0s0b3T" esc "&k11.75H" esc "&a1l0R" control(M) esc"&f3005y4X"
{Portrait}
{Letter}
{6 LPI}
{Define Page Length to 66 Lines}
{Set VMI = 8.000/48"}
{Define Top Margin at 2 Lines}
{Select 1 Copies}
{Disable Perf Skip}
{Define Text Length as 63 Lines}
{Feed from Tray 1 (upper)}
0.1 esc "&k12.00H"
{Set HMI = 12.00/120"}
0.2 esc "(8U"
{Roman-8 Symbol Set}
0.3 esc "(s0p10.00h12.00v0s0b3T"
{Fixed Pitch}
{pitch 10.00 cpi}
{Point Size 12.00}
{Upright}
{Medium Weight}
{Typeface 3}
0.4 esc "&k11.75H"
{Set HMI = 11.75/120"}
0.5 esc "&a1l0R"
{Define Left Margin at Column 1}
{Move to Row 0}
control(M)
0.6 esc"&f3005y4X"
{Define Macro ID 3005}
{Enable Overlay}
code "201" esc "&f0S" esc "&a1.25r70C" esc "(8U" esc "(s1p14v0s3b4148T"
{Push Cursor Position} esc "&f0S"
1.1 esc "&a1.25r70C"
{Move to Row 1.25}
{Move to Column 70}
1.2 esc "(8U"
{Roman-8 Symbol Set}
1.3 esc "(s1p14v0s3b4148T"
{Proportional}
{Point Size 14}
{Upright}
{Bold}
{Typeface 4148}
code "202" esc "&f0S" esc "&a20.25r70C" esc "(8U" esc "(s1p14v0s3b4148T"
{Push Cursor Position}
2.1 esc "&a20.25r70C"
{Move to Row 20.25}
{Move to Column 70}
2.2 esc "(8U"
{Roman-8 Symbol Set}
2.3 esc "(s1p14v0s3b4148T"
{Proportional}
{Point Size 14}
{Upright}
{Bold}
{Typeface 4148}
code "211" esc "&f0S" esc "&f0y0X" esc "&l0E" esc "&a0L"
esc "(0Q" esc "(s0p8.00h8.40s0b0T" esc "&k15H" esc "*p907Y" esc "&a13.8C"
{Push Cursor Position}
11.1 esc "&f0y0X"
{Define Macro ID 0}
{Start Macro Definition}
11.2 esc "&l0E"
{Define Top Margin at 0 Lines}
11.3 esc "&a0L"
{Define Left Margin at Column 0}
11.4 esc "(0Q"
{0Q Symbol Set}
11.5 esc "(s0p8.00h8.40s0b0T"
{Fixed Pitch}
{pitch 8.00 cpi}
{Font Style 8.40}
{Medium Weight}
{Typeface 0}
11.6 esc "&k15H" esc "*p907Y"
{Set HMI = 15/120"}
{Vert position = 907 Dots}
11.7 esc "&a13.8C"
{Move to Column 13.8}
code "212" esc "&f1x3x8X" esc "&f1S"
{End Macro Definition}
{Call Macro}
{Delete Macro ID}
12.1 esc "&f1S"
{Pop Cursor Position}
code "221" esc "&f0S" esc "*t300R" esc "*p1500X" esc "*p470Y"
esc "(30C" esc "(4B" esc "(s1p53v0s0b102T!"
esc "&f0S!" esc "&f1S" esc "*p+121Y" esc "&f1S"
esc "&f0S"
{Push Cursor Position}
21.1 esc "*t300R"
{300 DPI Graphics resolution}
21.2 esc "*p1500X"
{Horiz position = 1500 Dots}
21.3 esc "*p470Y"
{Vert position = 470 Dots}
21.4 esc "(30C"
{30C Symbol Set}
21.5 esc "(4B"
{4B Symbol Set}
21.6 esc "(s1p53v0s0b102T!"
{Proportional}
{Point Size 53}
{Upright}
{Medium Weight}
{Typeface 102}
21.7 esc "&f0S!"
{Push Cursor Position}
21.8 esc "&f1S"
{Pop Cursor Position}
21.9 esc "*p+141Y"
{Move down 121 Dots}
21.10 esc "&f1S"
{Pop Cursor Position}
code "222" esc "&f0S" esc "*t300R" esc "*p1500X" esc "*p650Y"
esc "(30A" esc "(s0p.426h35.25v0s0b128T" esc "&f0S!"
esc "&f1S" esc "*p+141Y" esc "&f1S"
{Push Cursor Position}
22.1 esc "*t300R"
{300 DPI Graphics resolution}
22.2 esc "*p1500X"
{Horiz position = 1500 Dots}
22.3 esc "*p650Y"
{Vert position = 650 Dots}
22.4 esc "(30A
{30A Symbol Set}
22.5 esc "(s0p.426h35.25v0s0b128T"
{Fixed Pitch}
{pitch .426 cpi}
{Point Size 35.25}
{Upright}
{Medium Weight}
{Typeface 128}
22.6 esc "&f0S!"
{Push Cursor Position}
22.7 esc "&f1S"
{Pop Cursor Position}
22.8 esc "*p+141Y"
{Move down 141 Dots}
22.9 esc "&f1S"
{Pop Cursor Position}
code "241" esc "&a-100V" esc "&l5.8C" esc "(8U" esc "(s0p12.00h10.00v0s3b3T" esc "&k11.75H"
41.0 esc "&a-100V"
{Move up 100 Decipoints}
41.1 esc "&l5.8C"
{Set VMI = 5.8/48"}
41.2 esc "(8U"
{Roman-8 Symbol Set}
41.3 esc "(s0p12.00h10.00v0s3b3T"
{Fixed Pitch}
{pitch 12.00 cpi}
{Point Size 10.00}
{Upright}
{Bold}
{Typeface 3}
41.4 esc "&k11.75H"
{Set HMI = 11.75/120"}
code "299" esc "(8U" esc "(s0p10.00h12.00v0s0b3T" esc "&k11.75H" esc "&l6D"
{Roman-8 Symbol Set}
99.1 esc "(s0p10.00h12.00v0s0b3T"
{Fixed Pitch}
{pitch 10.00 cpi}
{Point Size 12.00}
{Upright}
{Medium Weight}
{Typeface 3}
99.2 esc "&k11.75H"
{Set HMI = 11.75/120"}
99.3 esc "&l6D"
{6 LPI} -
Regarding new bank to be created for new office ...check printing issue...
dear all..
i need to create bank for our new office say BARODA office for check printing purpose.
our comp. has allready configured for mumbai and main office bank...
but i dont know the full cycle.. can anybody tell me the process to implement the same ?
thanks in adv..
jigar patelThanks Sandra for your response.
From the PCL Font list it says
USB Resident storage fonts
Font = H E-13B-600
Pitch/Point = 8.00/8.4
Esc sequence = <esc>(0Q<esc>(s0p8.00h8.4v0sb0T
Font = USB1 1
Font id = blank
I am only using Print control = SF450 as the SAPSCRIPT is copied form an existing one, but event he SAP standard text will not print (vanilla) SAPSCRIPT-MICRTEST or SAPSCRIPT_MICRTEST the correct fonts.
Do you think font pitch may be the issue, we are planning to change this tomorrow to 10.
Does the escape sequence need to be added as a new print control to the Device type in SPAD or does SF450 HPLJMI still work?
One other thing from note 94233 I checked the RAW spool file and it does contain
ST0652139Schriftart MICR_E 10 Punkt (MICR E-13B)
MT0198406457
CP40040000E
FCMICR_E 100 00180 SF450SF450400400180E
ST0018001A
MT0226706457
CP11000000E
FCCOURIER 120 00144 SF012SF012110000144E
ST0100807transit
MT0198406697
CP40040000E
FCMICR_E 100 00180 SF450SF450400400180E
ST0018001B
MT0226706697
CP11000000E
FCCOURIER 120 00144 SF012SF012110000144E
ST0086406amount
MT0198406937
CP40040000E
FCMICR_E 100 00180 SF450SF450400400180E
ST0018001C
MT0226706937
CP11000000E
FCCOURIER 120 00144 SF012SF012110000144E
ST0072005on-us
MT0198407177
don't know what more to look for. -
How to print Signature stored in a flash drive on to check print program?
Hi,
I have a check print program template and have the following requirement. I need to print the signature image which is stored in a flash drive that will be inserted in to the check printer (HP laserjet 4250 series). The vendor sent the escape sequence to activate the signatue image. I'm familiar with how to print images stored in $OA_MEDIA area but not in a flash drive.
Has anyone done this before? If you did, could you please let me know how and where to put the escape sequence the vendor sent on the .rtf document to activate the signature image while the check print program is run (Format Payment Instructions - in rel 12) ?
Message was edited by:
user586895Hi,
This is an interesting problem, and not something I have considered before. I do not know of an exact solution, but as your printer is on a network, theoretically it will have an IP address. When your flash drive is inserted into the printer I would assume that is is treated like any other drive in a PC, so you would be able to use a URL to get to it.
Using a dummy image and a URL to the printer flash drive you should be able to pick up the image.
Not entirely sure if this would work, but it may be food for thought, and help you along the way.
Regards,
Cj -
Query Related to Check Printing:
Hi All,
Please help me out how I can make it Possible?
Once I am printing the Check with Transaction FBZ5, the roller of the printer is not being stopped after the printing of the first check and four to five checks in sequence are coming out.But I want after printing the first check( Once the Print Command is given)and marker should come onto the edge of second check(My Printer is Dot-Matrix).
please suggest how we can do it..
Thanks,
Rajeev
Moved from ABAP, General forum by: kishan P on Aug 26, 2010 11:18 AM
Edited by: Rajeev Shrivastava on Aug 26, 2010 11:15 AMHI rajeev ,
Goto transaction : SPAD --->In device type tab -
> Device type ---> pass 'EPLQ550' in it ---> Display
go in FORMAT --->will give u list of page formats available to your script SELECT AND DOUBLE CLICK on it .
In that in ACTION Segments click on -
>End of page and write code :::
_*# No FORMFEED, since SAPscript uses PrintControl SPAGE for that!
Do not remove this comment!
/f*_
/f
Hope it will help you .......!
Regards
Swapnil kamble -
Print sequence error - No matching records found
Hi experts,
We are facing an issue when choosing to print a sequence of two documents. These two documents can be printed individually without any error, but when we try to print the sequence, we are getting the error "No matching records found".
This issue occurs in both SAP 9.0 (pl5) in Inventory Movement document and in SAP 8.82 (pl5) in all purchase and sales documents.
Has anyone faced the same issue?
Thank you in advance.
Kind Regards,
Vassilis KorolisHi,
It is an application error in 8.82 & 9.0 versions.
Please check SAP note:
1981583 - An error appears when you use Print Sequences for a Stock
Transfer document.
Thanks & Regards,
Nagarajan -
Client wants to use blank check stock sent to a laser printer with magnetic ink to prink their checks.
I assumed if they have a valid MICR font set installed on their workstation, I can just modify one of the Business One check layouts to use the MICR font to print the Check Number, ABA Number and Account Number on the bottom of the check. I know I have to print the numbers in the correct sequence per the MICR Gauge. I figure I will have to concatenate the fields with their start/stop codes into one big formula and then print that at the bottom of the check.
Has anybody else done this? Is there something I'm missing?
TIA.Hi Cindy Lange,
There is an add-on that has been created for MICR check printing and is available to the SAP Business One market in the US currently (I am not sure about other countries yet). The SAP Business One partner that has developed this add-on for Business One is located in California and the company is Mekorma. You can see details of the product at [www.mekorma.com] as well as is you are an SAP Business One partner you can also get details on the products from Mekorma at [service.sap.com].
Hope this helps,
Regards,
Madhan. -
[Urgent] How to print Line items Twice in Check Printing ??
Hi <b>Experts</b>,
We have got a requirement of printing the vendor invoice info(Line Items) above and below the actual check.
Eg.
Page 1
1-8 Line Items
Voided Check
<b>1-8 Line Items</b>
Page 2
9-16 Line Items
Voided Check
<b>9-16 Line Items</b>
Page 3 ..... (last Page)
17-20 Line Items
Actual Check
<b>17-20 Line Items</b>
Now, All the things are printing fine except dual printing of the Line items at the below of Check.
Please help me..... i am using Check print program <b>RFFOUS_C</b>.
If anyone can has done something like this before than please send me the code for it.
If someone requires more clarification, please ask me.
Regards,
<b>Abhishek</b>Hi Abhishek,
we have done check printing here. but can u pl tell me why is the line item required to be printed below the check also??
u must have observed that in the check sapscript ( F110_PRENUM_CHCK), the main window is situated above the check window.. n the line items are coming within the main window...since the line items are dynamic data( not fixed), u have to create a window below the check n that has to be a MAIN window again for it to display multiple data.. so wen ur last page is getting called ( u need to find that out that wen is the last page getting called ), u can insert a write_form for this new main window along with the other write_form( for the earlier main window).
it can get very complex though as i dont know if this will certainly work...
is the requirement reaaly to print the line items below the check or anything else will do?? as it wud greatly reduce ur headache... -
Hi
I have this urgent requirement:
1) In AP if number of invoices > Invoices/Stub (in Payables steup), void checks get generated. This is the seeded Oracle functionality.
My client does not wanna waste check numbers. So, he doesnt want any check number to get generated for void checks.
Question: How do I accomplish this?
2) In my check printing template I am displaying the check number @ the top of each page. So, the requirement is that for void checks, the non-check check number of the check that pays all these invoices should be displayed.
Question: Is there any way I can derive the non-void check number (that pays the invoices) from the void check number?
RitsHi
I have this urgent requirement:
1) In AP if number of invoices > Invoices/Stub (in Payables steup), void checks get generated. This is the seeded Oracle functionality.
My client does not wanna waste check numbers. So, he doesnt want any check number to get generated for void checks.
Question: How do I accomplish this?
2) In my check printing template I am displaying the check number @ the top of each page. So, the requirement is that for void checks, the non-check check number of the check that pays all these invoices should be displayed.
Question: Is there any way I can derive the non-void check number (that pays the invoices) from the void check number?
Rits -
R12 - check printing : How to set RTF template for preprinted stationary
Hi all,
We are on R12 instance and have requirement of check printing on preprinted stationary. For this requirement we are customizing standard RTF template.
Preprinted stationary layout is like upper part ( check nmber, check date) then body part ( invoices details ) and then trailer part ( check amount, supplier name)
Problem: When I am printing check against only one invoice then print is coming properly but if I print check against more than one invoice then trailer part (check amount, supplier name) is moving forward. I want trailer part to be fixed on same position.
If anyone have already done this please guide me.
Thanks n advance,
Mandar
Edited by: MS on Aug 26, 2010 8:29 AMTry to put them in a Table Columns.
I Hope they will not move...
Thanx,
Deepak -
Template is not attached to AP Check Printing report (XML Publisher)
Hi Guru,
I have implemented XML publisher version of AP check Print report and did all the setups. When we make the payment in payables it automatically submits check print report. The report is completed successfully, but no output.
When I check View details button noticed that template layout is not attached to the report.
Please do the needful.
Thank in Advance,
Venkat.Hi,
The following are the Instance details
OS : OEL5
Database: 11g
EBS : 11.5.10.2
I have completed all the setups for the report and I am able to see the template attached to the request for other reports where we submit them in SRS window.
But "AP check Print report" submits automatically through the form while making the payment against supplier in AP.
Thanks in Advance,
Venkat. -
Migratiing AP Check print from RDF to XML publisher
We are migrating customized AP Check print report from RDF in 11.5.7 to R12 XML Publisher report. We have 18 reports to convert.
I have followed
http://oracle.anilpassi.com/xml-publisher-concurrent-program-xmlp-2.html
link to do the same.
I am facing the follwoing issue.
I am getting empty output after did all the changes as per the ablove link
But only modification i did is, as in R12 we ahve separate top for Payments. But we dont have Report folder under IBY_TOP. So I am keeping my RDF report in AP_TOP and I have created executable under ap_top then Program under Payment_top. Remaining are same.
But I am not getting the output.
Pl. let me know, what I did is same or how to proceed
this is very urgent. so expecting the reply at the earliestWe are migrating customized AP Check print report from RDF in 11.5.7 to R12 XML Publisher report. We have 18 reports to convert.
I have followed
http://oracle.anilpassi.com/xml-publisher-concurrent-program-xmlp-2.html
link to do the same.
I am facing the follwoing issue.
I am getting empty output after did all the changes as per the ablove link
But only modification i did is, as in R12 we ahve separate top for Payments. But we dont have Report folder under IBY_TOP. So I am keeping my RDF report in AP_TOP and I have created executable under ap_top then Program under Payment_top. Remaining are same.
But I am not getting the output.
Pl. let me know, what I did is same or how to proceed
this is very urgent. so expecting the reply at the earliest -
How to change font size in check printing program in AP Invoice
I would like to know how to change font size in check printing program in Oracle Payables Module for Invoice printing. We are using Oracle standard
report to print check.
Concurrent program short name : APXPBFEL
Prt file : APLASP.prt
I modified prt file for code 199 like below
code "199" esc "(8U" esc "(s0p12.00h10.00v0s0b3T" esc "&k11.75H"
Font size changed for last page only which prints checks, for Void pages its printed with default font. For Page 1 printed with default font and page 2 has reduced font. This change is not intiallized for all pages.
Please let me know if you any of you know how to change fonts.
Thanks,
Anand*Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
-
Cheque printing. How to avoid last page in case of check printing in F110?
F-68 prints only one page whereas F110 prints 2 pages.
How to avoid last page in case of check printing using F110? Is there any other option than changing the Script.Hi,
Im also facing the same issue. Generates 1 page with F-58 but 2 pages with f110. Kindly let me know how to resolve. -
Format Payments check printing program completes in warning APP-FND-00500:
Hi All,
I'm in process of converting Oracle Payables check printing from reports 6i to XML publisher.
I created template, data definition and changed the output for concurrent program to XML.
I tried printing check and 'Format Payments (Evergreen)' concurrent program completed with warning.
Log file has following error.
APP-FND-00500: AFPPRN received a return code of failure from routine FDUPRN. An error occurred while AOL tried to spawn the print process
Cause: AFPPRN received a return code of failure from the OSD routine FDUPRN. An error occurred while AOL tried to spawn the print process.
Any one there has any idea what this error is for.
Thanks
pallaviThis could have something to do with the fact that your printer is not set up correctly. Can you run a plain text (OReports) file output to the same printer? If not, then the printer is not set up in FND correctly. If you can ...
Remeber that unless you have a more modern printer that can handle PDF documents natively then XMLPs PDF is going to need to be converted to PS or PCL. I would suggest you investigate the PASTA printer driver and get that set up. It provides the ability to call a program pdf2ps for instance, to convert the PDF to PS. There is a bunch of info on metalink
Tim
Maybe you are looking for
-
Determine NIF port used by VIF when configured in a port-channel
I have recently just watched an excellent Cisco Live video on UCS performance troubleshooting which demonstrated how to trace network traffic within Cisco UCS. The speaker made a comment though, in order to determine which NIF is used by a VIF when p
-
HT204053 Why can't I access my apple account?
I tried to access my apple account to sort out my billing information, but for some reason I am repeatedly asked for my password. I know for a fact that my I.D and password are correct because I was able to sign into this web site with no problem. I'
-
What is ges reusing os pid wait event
What is wait event "ges reusing os pid". In our RAC environment it is one of the top wait events. How to minimze it.
-
I have all of the latest software updates (system, iTunes, iPhone) but the iPhone will not auto synch with my Core 2 duo iMac. iTunes starts up when the phone is plugged in but there is no auto synch even though that option is checked in iTunes. I ca
-
Where do i get the 5.1 digital driv
i need the 5. digital dell version.because the website says the download has been ended