Check printing using dot matrix printing?

HI all,
I have developed check printing using smartform for laser printer now the my client requirment has changed they are now using a dot matrix printer for check printing, so what parameter should i consider for developing a check printing for dot matrix printing

the same smartform and driver program will work for all kind of printer.

Similar Messages

  • Barcode printing using dot matrix printer

    Hi,
    Can anyone let me know what all DOT Matrix printers support barcode printing (PDF 147 type), The barcode is printed in invoice when printout is taken using laser jet but when using dot matrix (Panasonic kx-p3696), the invoice gets printed  without barcode.
    Thanks in advance.
    Sachin

    closing thread

  • Printing using dot matrix printer,problem with landscape printing

    Hi all,
    We are planning to use Dot matrix printers for printing through SAP.We do front end printing using Windows OS. I am able to get prints properly if it is a script form. In case of list outputs, printer is printing the text outside the paper.Only half of the text is printing on the continuous stationary. Actually document is to be printed in Landscape format. So printer should print data vertically on the paper,but it's printing horizontally. I have created sparate output device for this printer.My printer is TVS Electronics HD745 24 Pin heavy duty printer. I have assigned OKI341 as device type for this device.Any more settings I need to do to get printing in landscape mode?

    closing thread

  • Right side Text not printing in Dot Matrix Print

    Hi Gurus,
    When i take print of the smartform with Laser Jet Printer its comming fine , but when i print using Dot Matrix Printer the text at right side is not printing.
    Printer model : Epson DFX-5000+
    Can any one tell me how to resolve this..
    Thanks
    Ganesh

    hi ,
      SAPWIN Drivers which support those Epson printers  check in SAP (windows support )
      These will solve your Problem  .
    Regards
    Deepak.

  • Problem in Smartform Table/window Line Using Dot Matrix Printer

    Dear Experts,
    I faced issue in printing smartform using dot matrix printer. In the print result, the table line (horizontal and vertical) is not printed. I already search the forum but none can solve my issue. I already changed the table line width into 30 or 40 TW but still not work. Everything is OK in the print result, except the table line.
    If i manually print/write '__' (underscore), it appear in the print result, but to write horizontal line and vertical line manually in the smartform will be huge effort.
    I used device type EPESCP9 for the output device.
    Can you tell me what i need to do?
    your help will be appreciated.
    Thanks

    Hi,
    Check your device type.
    http://forums.sdn.sap.com/thread.jspa?threadID=2016838
    Jshree

  • Printing form using dot matrix printer

    Dear experts,
    I have a PO form and when printed using laser printer it works just fine, when use dot matrix printer with continuos form , the form's content started to be printed a bit lower compared to the laser printer, should i adjust the paper size in the se71 ?

    Hi Johannes,
    We have been know to go directly into the printer defintion and adjust the Horizontal and Veritical Shift. This can be found on the Output Attributes in the Additional SAPScript and Smart Form Information area. We give our A4 printers a slight Negative Horizontal and Positive Vertical shift to better center the output on the different paper size.
    Regards,
    Raj

  • Draft / fast Printing on Dot Matrix Printer(s) from Windows

    Dear all,
    we need to print all documents in Draft / fast Printing on Dot Matrix Printer(s). how we can print quick draft mode. we are using SAP PL43. from where we can download draft 10cpi fonts.
    Regds,
    samapth

    Draft mode is not by font.  It is a specific printer mode.  If you can not manually setup the mode, B1 may not have any abilities to print in this mode.
    Thanks,
    Gordon

  • Horizontal Vertical and logo is not printed in dot matrix printer

    Hi All
    i am printing a smartform in dot matrix printer
    the form has horizontal vertical line
    table lines , and logo
    but when i print in Dot matrix printer
    the line and logo is not display
    Please say me how i design for it
    wheather It is printer or smartform design problem?
    Regard
    Riten

    Hi riten,
    The Printer settings is not supporting the horizontal and vertical line ..check with the basis team for the printer settings.
    Regards,
    Sravanthi

  • Printing on Dot Matrix Printer

    Hi
    I am using JPS for printing, but to print on dot matrix printer, conventionally you print character at perticular row & col. Using Java Print Services how can I print a report to Dot Matrix Printer.
    Thanks in Advance

    Anybody knows I am also facing same Problem.
    Thanx

  • Crystal reports printing in dot matrix printer

    I'm using Crystal Reports 2008 with Visual Basic.Net 2008. The problem is that when i print the report in a laser printer, everything is good, but when i used dot matrix printer (like Epson LX 300+), reports is printed smaller than original, doesn't matter if i see good in preview. This is an Asp.Net web form.
    How can i fix this problem

    1) Make sure you have the latest CR Service Pack:
    SP4 https://smpdl.sap-ag.de/~sapidp/012002523100008782452011E/cr2008sp4.exe
    SP4 MSI https://smpdl.sap-ag.de/~sapidp/012002523100008782532011E/cr2008sp4_redist.zip
    SP4 MSM https://smpdl.sap-ag.de/~sapidp/012002523100008782522011E/cr2008sp4_mm.zip
    2) Make sure you have the latest updates for the printer driver
    3) Make sure the printer driver is Unicode compliant
    4) Experiment with the "No Printer" option and Dissociate Formatting Page Size and Printer Paper Size option
    5) Compare print from the CR designer to the app print. Do you see the same issue with both?
    Ludek
    Follow us on Twitter http://twitter.com/SAPCRNetSup
    Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

  • Printing in Dot Matrix Printer

    Hi to all,
      As we know that the dos matrix printer supports dos prompt and thus printing speed and 
    life of the printing head is comparatively more than what we print the same in graphical format.
      So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
      Any clarifications on this regard would prove very helpful to me.
    Regards,
    Aditya
    Consultant Business solutions.

    Do you use one of this printer types:
    Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline
    , Epson FX880, Epson FX890 ?
    Here the stepwise I have tried :
    In order to print using Dot Matrix printers, follow the below
    instructions:
       1. Run SAP Business One.
       2. Click the upper menu 'File' and select 'Page Setup'.
       3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
       4. Click OK to confirm your selection.
       5. On your desktop, click Start => Settings => Printers.
       6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
       7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
       8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
    Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
       1. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
    Note that in case the value '120X144' is not available you should select a similar value from the list.
    After you do the stepwise, I am sure there will no problem any more. The slowly printing mostly caused by printer type and your hardware specifications for example your LAN, etc..
    good luck...
    Rgds,
    null

  • Need to Take Fast Printing on Dot Matrix Printer Using Report 10g

    Dear ,
    I need to take a fast output of Oracle 10g reports on Dot Matrix printer
    Client runs the report and open in PDF but when he takes hard copy on his/her local printer, then printer works very slow and take huge time to print a single page.
    Kindly help me, how can client get the output directly on his locally attached Dot Matrix Printer and fast.
    Reports desinged and compile in Report10g R2 and
    Middle teir using =Application Server 10 R2.
    Thanks and regards.
    Priya

    Draft mode is not by font.  It is a specific printer mode.  If you can not manually setup the mode, B1 may not have any abilities to print in this mode.
    Thanks,
    Gordon

  • Printing to dot matrix printer using continuous sheets

    Hi;
    Can anybody help me;
    We have a web-based application.We have developed it with java and jsp. We want to print out several bills to continuous sheet.We are doing printing out with internet explorer and getting first page arranged but the following pages are sliding down.
    Is there any way to print out to continuos sheet with dot matrix printer through java

    You mean you want the browser to do that? Frankly I don't think you are likely to succeed, but possibly using CSS (with an "@media print" section) might work. Specify fonts, font sizes, try to control everything that can be controlled through CSS. Note that this has nothing to do with Java.

  • Sales invoice Smartform printing in dot matrix printer in sucession

    Dear all,
    I am trying to Print Sales invoice on Dot matrix Printer.
    My First Invoice is printed ok, but if i try to print second invoice without manually adjusting the paper the alignment on printer goes haywiered.
    Do we have some option in smartform where we can trigger new page command.
    Regards,
    Gaurav Sood

    Hi Amiya,
    you need to check the paperformat which is used. I'm pretty sure that there is a wrong paperformat selected. The supported paperformats are published in the official documentation of the printer-model.
    ~Florian

  • Printing Invoice Dot Matrix Printer  in the paper size 9.5 x 11 inches

    Dear All, 
    Am using Pre-printed Stationery but I have a problem with  printing configuration for AR Invoice through Dot Matrix Printer in paper size 9.5 x 11 inches, when command to print the first page it print perfect but the continuation  is not start on the body of the contents but it start from the header of the pre-printed stationery  any one with experience on this please share with me.
    Regards
    Grayson

    hi,
    Have you customized PLD according to paper size ?
    Check whether you customized fields in start of report area ? If yes then it will be printed
    only on first page.
    Check for printer supported by B1 in below link
    [SAP Business One Best-Practice System Setup and Sizing document ]
    Jeyakanthan

Maybe you are looking for

  • Is it still possible to obtain imovie HD?

    Friends, I have ilife 08 but I would like to obtain a version of imovie HD. Is it possible? I can't find a downloadable version on Apple's website. Thanks! Steve

  • RDBMS

    I need the facilities provided by an RDBMS for an app that I am currently specifying that goes way beyond what SQLite can provide and wonder if anyone has a suggestion. What I need is ODBC connectivity and a framework for Objective-C. It really needs

  • JAAS login module

    Hello all, I'm having a problem with authentication. I hava a jaas Login Module that authenticates users against a db. After some work I could configure it and got it working. But, even my Login Module works fine, after validating an user I get the e

  • Metadata applied in FCS viewable in FCP?

    We're trying to map metadata from a description field inside Final Cut Server - to the lognote field in Final Cut Pro. This way, editors can se a short description of clips in the browser inside Final Cut Pro. Has anybody successfully done this? We d

  • Where are the settings and import buttons

    I finally got my home sharing to work.  But after selecting all, there are no "settings" or "import" buttons on the bottom right of iTunes.  Help!