Check printing using smartform

Hi All ,
I have urgent requirement that to convert standard check
printing program to our custmized check printing program using smartform .
Please suggest the way , how we can do that?
Regards
Mohit Bansal

Hi,
For Creating custom check printing you need to do following steps.
1. Create Custom page format using SPAD.
2. Created smartform layout using custom page format.

Similar Messages

Check printing using dot matrix printing?

HI all,
I have developed check printing using smartform for laser printer now the my client requirment has changed they are now using a dot matrix printer for check printing, so what parameter should i consider for developing a check printing for dot matrix printing

the same smartform and driver program will work for all kind of printer.

C6380 Printer's always running out of ink. Is there a way to check printer use history?

c6380 printer always seem to run out of ink. Is there any way to check printer use history. No one owns up to using it much, but we also seem to run through paper. Maybe the pets are secretly using it?

Hi - This may not be exactly what you're looking for but the Extended Self-Test page does provide a page count. It doesn't give you a history of when pages were printed, but it will at least tell you have many pages have been printed overall.
Hope that helps.
Kevin
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Arabic Printing using Smartforms

Hi Gurus,
I am trying to print arabic text using smartforms. I have set MS Word as the text editor. Arabic text is coming up correctly in the editor (Arabic font, Right-to-Left). I created a Arabic smartstyle using A_TRAD font (I also tried other arabic fonts available). Now when I try to print it on HP LasetJet printer, the arabic text is coming up as single characters rather than words and lines. Different Arabic characters are not joined together to form words, they are all single characters separate from each other. Whereas arabic text is coming up correctly in the MS Word editor. Any help would be highly appreciated!!
[email protected]

Hi There.. Greetings...
I am having the same problem of printing Arabic text in the smartform. The arabic Text is printing in opposite direction as well.
what is the solution for this?
Please help me.
Looking forward to hearing from u.
Kind regards,
shekher

Check printing using F110

Hi Experts,
I have made a custom script by copying standard SAPscript F110_FR_CHEQUE. Configuraion is done by functional and i have checked in FZBP transaction also that my Z script is configured for program RFFOUS_C. But when i am printing using F110 transaction, my form is not getting triggered (i have activeted the debugger).
Please help me out in this respect, how can i make my script triggered from F110. Please reply ASAP.
Thanks in advance.

hello mannu ,
in FBZP u need to check for which company code , payment methods ---> u have assigned ur scripts.
say DE(country)-->payment method 'C'->check payments.
while running F110---> u need to give payment method C only , then it should tigger , if not then probs with ur payment documents.
check proposal & payment logs to get more info.
regards
Prabhu

Check print using f110

Hi all
i copied the check print script F110_PRENUM_CHCK....and made changes as per required...
i did no change in the driver program ie RFFOUS_C....
now i m using two tcodes F110 & FBZ5...for printing...check....
its printing properly from FBZ5 ....but while printing thru F110 it is printing two checks.....
i removed( commented the text in scripts and deleted the next page ) the advice note ,summary ,i m printing only the check....
F110 is printing two check e.g.000320,000321.........
is it a problem of configuration...plz let me knw....
i also changed the script name from FBZP....
so plz let me knw...
Thnx
Rohit

When the SAPscript form is called, it uses the formname which is setup in configuration. The following is the path in configuration (t-code SPRO) where the formname is entered:
SAP Customizing Implementation Guide>Financial Accounting>Accounts Receivable and Accounts Payable>Business Transactions>Outgoing Payments>Payment Media>Make Settings for Classic Payment Medium Programs-->Assign Payment Forms for Payment Method in Company Code
This path (in SPRO) will allow you to setup payment methods and the corresponding form names for a particular company code. Once you select a specific company code and click on the "Allocate forms to payment method in company code" folder in the left-hand window area, it looks like you have the option to specify a SAPscript formname or a "PDF-based Payment Medium Form"
I am unsure of the actual logic used to call the Adobe form.

Check printing with SmartForms

Hi,
I need to print a check with tr F110. I know that RFFOUS_C is meant for SapScript printing. Can anyone tell me how to do for SmartForms?
Tarick.

You cannot use a SmartForm to print cheques in SAP because the FI configuration will not allow it till release ECC6.0. It has to be printed via SAPScript - there is no other way.
Cheers,
Sougata.

BarTender for Zebra Barcode Label printing using Smartform

HI Experts,
Does anyone know how to use BarTender 7.10 software to create barcode labels for Zebra printer?
I have to include a jpg Logo into the Label using BarTender.
But when I test using the Zebra printer - the logo/picture won't print out.
Any idea?
Thank You.
Best Regards,
CW

Hi There,
I had problems with using Bartender when I tried to print a logo onto my labels, but I contacted a [labelling company |www.iidsolutions.net] who specialise in barcode label printing and the bartender software, they sorted out my problem but then after a chat with them I decided it would be easier to get them to print the labels for me as I had loads of changes and they were quite cheap. See if they can help you. :~)
Good luck.
Dave.

Label print using smartforms

Is it possible to print labels based on GR qty.
Example: in my GR I have material with 100 CAR when I press print icon, the system has to print 100 Labels.
Regards
GK

Hi,
Follow the below steps.
1.Create a smart form(Z_GR_QTY_LABELS)
2.Put all the data in an internal table which has to be printed on the males.(One row corresponds to one label)
Hence the number of row in the itab are the GR qty
3.Create a loop and put the condition
To create a loop:Right click>Create Flow Logic>Loop
and put condition on Condition tab(Give sy-tabix LE Gr_qty )
4.Save and activate
Note:
Take care explicit page break.
Hope this helps you.
Regards,
Rama.

Print PO using Smartforms?

Hi Gurus,
I'm new to smart forms.
Can smart forms used to print PO(using Transaction ME23N)?
As I know, the PO is print using SAP Script, can it be done using smartforms?
thanks in advance.
Hikaruno

Hi
YES, PO can be printed using Smartform also.
see the related forms and program
PUCHASE ORDER
Output type         : NEU
ScriptForm Name     : MEDRUCK
Driver Program Name : SAPMF06P
smartform name      : /SMB40/MMPO_L
SF creation
How to create a New smartfrom, it is having step by step procedure
http://sap.niraj.tripod.com/id67.html
Here is the procedure
1. Create a new smartforms
Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
check this:
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
http://www.sapbrain.com/TUTORIALS/TECHNICAL/SMARTFORMS_tutorial.html
check this linkls------>
https://www.sdn.sap.com/irj/sdn/collaboration
http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
<b>Reward points for useful Answers</b>
Regards
Anji

HOW I PRINT A SMARTFORM?

Hi guys, im new in abap, so i need your help, some one can tell me how i can print a smartform?, what functions and parameters i need?, if you can send me an example code it realy helps me.
Thanks & Regrads
Luis

Hi Jose,
Check these program in SE38. These descibes how documents are printed using Smartforms.
<b>SF_EXAMPLE_01
SF_EXAMPLE_02
SF_EXAMPLE_03</b>
Check these links to know about smart forms
http://www.allsaplinks.com/smartform_example.html
http://www.allsaplinks.com/smartforms1.html
Thanks,
Vinay

Cheque printing. How to avoid last page in case of check printing in F110?

F-68 prints only one page whereas F110 prints 2 pages.
How to avoid last page in case of check printing using F110? Is there any other option than changing the Script.

Hi,
Im also facing the same issue. Generates 1 page with F-58 but 2 pages with f110. Kindly let me know how to resolve.

AP Check printing setups for printing checks on your own

HI
I am wondering if there a good document which deals with AP check printing with MICR and signature on your own check stock
thanks

Recently we started to deal with AP check printing in our organizatin. It was a daunting task with the information and resources scattered all over and missing critical pieces of information to make sense out of the whole process flow. We attempted to go through the AP check printing internally and succeded.
I decided to post the information for the benefit of people about the our experience
Check Printing Basics and Beyond for Printing Checks on Your Own
by
Sarma Chilukuri
This article deals with what is needed to get your own checks printed. It is a first attempt to uncover all the hidden rules that one should be aware to get your own checks printed. The first section deals with the basic AP check printing setup, while the 2nd half explores some of the flow of events that make it possible to print the check.
Part I â Basic Setup
AP Setup for check printing
There are multiple steps in the AP check printing. First set of steps deal with the AP side setups. The second step is to get the System side setups. The system side setup deals with printer setup and program options setups. The last step would be to make the print format files configured with the vendor provided escape sequences in the laser print format file.
Step 1: login as Payable Manager
Step 2: Bank Setup: Navigate to Setup: Payments > Banks
1.     Make sure the Bank # etc are present
2.     Tab to âBank Accountsâ, and make sure your account # has been setup
3.     On the Bank Accounts screen, tab to the âPayables Documentsâ and verify that Payment format (E.g., COK Laser Format) has been entered. This âPayment format links to next section where we associate it to the right payment program.
Fig 1. AP Payment Bank Setup Screen
Step 3: Program Setup (Setup: Payments > Programs)
As we know there are only 5 formats 3 of which are âEver Green Laserâ (APXPBFE G|L|F) which are explained in the AP Users Guide. For your own form printing, you have to associate the format to APXPFEL (laser format) program. Also, the APXPBFEL or APXPBFEF call the APXPBFEG, which is the base program that pulls the data from oracle base tables. APXPBFEL is the one which allows us to print the checks with MICR and signature on a plain paper not on a pre printed stationery.
Fig. 2 AP Payment Format Setup Screen
Printer Styles, Drivers setup
The above process summarizes the AP Setup. As a DBA, the printer setup needs to be validated. The base install provides the right setup to some extent. But the differences in printers and print queues may add some complexity to the final configuration. The following section discusses the set up the base install provides and changes as needed.
Step 1. Login as system Administrator
Step 2: Style (Install : Printer > Style)
Look for the âPORTRAITHPLJ4LASCHECKâ. This one is associated with the SRW Driver Called, âAPLASPâ (AP Laser printer format).
Step 3: Driver (Install : Printer > Driver).
     1. The âPORTRAITHPLJ4LASCHECKâ is associated with a âUser Driverâ of PORTRAIT for HPLJ4 and and a SRW driver of âAPLASPâ
     2. Also notice that there is an Initialization string at the bottom of it. This initialization string gets called as pre-report trigger for the APXPBFEG program (APXPBFEG.rdf) file. It sets the kind of format it should be. Please see the Appendix A for details on these printer pcl code translations. The Initialization string was as follows:
Initialization: /eE/e&l0o2a7C/e(s0P/e(8U
Step 4: Printer type (Install : Printer > Register)
Each printer type is associated with a set of styles. Make sure the printer that was selected has the above style and its associated driver listed against that.
Fig. 3 System Administrator Printer Seups
Step 5: Program Setup (Concurrent > Program > Define)
This step holds the key for check printing. It is necessary to define whether you need the check on top followed by the Stub or the other way around. The way it is controlled is based on the APXPBFEG.rdf, the report definition file and the APLASP.prt (Printer Style associate with the Portrait laser check format SRW driver). The APLASP.prt file ($FND_TOP/reports) has two identical setups called the 100 series and the 200 series. Those identical sets of setups define where the MICR and signature print on the check. The following table lists the some of the codes in the 100 series. Please refer to Doc ID #146452.1 for complete details.
Fig. 4 System Administrator Concurrent Program Definitions
CODE #     Code Definition
100     Electronic check activation string
101     1st Check #
102     2nd Check #
104     Deactivate check number mode string
111     Activate MICR line
112     MICR Deactivation / reset the printer head position
121     1st Signature
122     2nd Signature
141     Address font activation string
199     Return to default state string
Table 1. APLASP.prt -- MICR Activation Codes
The above code block repeats itself the same way in the 200 series. The decision to activate one way or the other controls the Check printing.
Step 2: Setting up the Option block
In the concurrent program definition for the APXPBFEL, there is an Options block in the middle. You need to list the codes that you want to activate. Please refer to Doc ID # 186640.1 for some explanation on these.
E.g.,
p_printer_code_mask="201,211,221,241" p_sig2_amount="" p_sig3_amount="" p_sig1_vendnum="" p_sig2_vendnum="" p_sig3_vendnum="" p_country_to_ignore="US" p_continuous_stationery="N"
Step 3: Output format is Text
Text format is sufficient, as the printer will pick up these escape sequences anyway.
Fig. 5 System Administrator Concurrent Program APXPBFEL Options Definition
UIPRINT.TXT, UIFONTS.ALI
One needs to be aware of a few more pieces in this puzzle. The UIPRINT.TXT identifies to the Oracle Applications the print queues that were setup. This file is needed to set your PCL / Post Script printer definitions. I did not have to really tinker with these files other than identifying the PCL and Post Script Qâs that were setup on the UNIX box.
Part II: Integrating all the pieces
The above setups are all documented in various articles. We need to understand a few more steps to see how all these pieces come together.
What you need to know about APXPBFEG.rdf
APXPBFEG (.rdf) is the report file which when called pulls the data from Oracle. If you open the APXPBFEG.rdf in the Oracle reports, there is initialization to the report called, SRW.Init. This will bring in the initialization string associated with the PORTRAITHPLJ4LASCHECK driver definition file. Also, please be very careful with this report format file. When you open it, there is small tiny empty block. in the first block which calls the printer initialization code 100/200 under the Format Mask (from APLASP.prt). If this portion gets changed or messed up, one can end up with some unexpected results. Each of those blocks like MICR, CHECK etcâ¦ have associated format triggers and printer codes.
Please make sure that the printer mask is properly handled. I noticed that the 200 series MICR (211) and Signature (221) printer masks were tied to 111 and 121 respectively. These should have been 211 and 221. The other place you need to be careful was the printer code before and after is proper.
For E.g.,
For the MICR, the âprinter code before and after columns â should be 111 and 112 (or 211 / 212) respectively while Format Trigger should reference to 111 (211).
Fig. 6 APXPBFEG rdf file printer mask and Format Triggers
The escape sequences in the APLASP.prt file for these codes will play the crucial role in getting our format around the report output that gets generated from the APXPBFEG program. Please refer to the explanation of these escape sequence codes in the APPENDIX A.
At this point when you run the program, you will see that the formatted output report file will have all the initialization strings and the output associated with that. You can compare the fields and verify the results. Let us closely examine the parts of the 111 and 121 where the micr and signature prints. The key to this to code the escape sequences the right way to get the associate MICR and signature print out correctly.
Fig. 7 APXPBFEG rdf file MICR printer mask and Format Triggers
Code 111 and Code 112 from the APLASP.prt file.
I broke the line into pieces to illustrate the exact escape sequence code.
Code "211"
Part 1: esc "&f0S" esc "&f0y0X" esc "&l0E" esc "&a0L"
Part 2: esc "(8M" esc "(s0p8.00h8.0v0s0b80T" --- This will be provided by the ROM
Cartridge provider
Part 3: esc "&k15H" esc "*p3215Y" esc "&a13.8C"
code "212"
Part 1 : esc "&f1x3x8X"
Part 2 : esc "&f1S"
Let us go over these 2 sets of codes carefully.
Escape Code     Meaning     Comment
esc "&f0S"      Push Cursor Position
esc "&f0y0X"     Define Macro ID 0 and Start Macro Definition
esc "&l0E"      Define Top Margin at 0 Lines
esc "&a0L"      Define Left Margin at Column 0
esc "(8M"     8M Symbol SetNote : As per pcl codes this happens to be Font Primary JIS Math 8 symbol     MICR Part 1 : Provided by the Vendor from where you the ROM cartridge
esc "(s0p8.00h8.40s0b0T"     {Fixed Pitch}{pitch 8.00 cpi}{Font Style 8.40}{Medium Weight}{Typeface 0}     MICR Part 2 : Provided by the Vendor
esc "&k15H" esc "*p907Y"     Set HMI = 15/120" Vert position = 907 Dots
esc "&a13.8C"     Move to Column 13.8
     CODE 112
esc "&f1x3x8X"     {End Macro Definition}{Call Macro}{Delete Macro ID}
esc "&f1S"     {Pop Cursor Position}     At this point, the MICR gets printed
Table 2. Escape Sequences in APLAP.prt file Explanation
Fig. 8 APXPBFEG rdf file Signature printer mask and Format Triggers
The signature piece (221) has also similar meaning.
Escape Code     Meaning     Comment
esc "&f0S"     Push Cursor Position
esc "*t300R"     300 DPI Graphics resolution
esc "*p1500X"     Horiz position = 1500 Dots
esc "*p650Y"     Vert position = 470 Dots
esc "(4B" esc "(s1p53v0s0b102T"esc "&f0S!"     Symbol SetProportionalPoint Size 53UprightMedium WeightTypeface 102Push Cursor Position!     Vendor gave the us esc "(4B"esc"(s1p53v0s0b102T!"Note: the ! when the it pushes the ! and that is where it prints the signature piece. The first part forms the symbol set , say (4B and the later part forms the signature font and ! is the piece. I took the ! from the above and let it stay with the 3rd part of it so that signature does not print twice.
esc "&f1S"      Pop Cursor Position
esc "*p+121Y"     Move down 121 Dots
esc "&f1S"     Pop Cursor Position
Table 3. Escape Sequences for Signature in APLAP.prt file and Explanation
Summary
One can print their own checks using the above steps. This can work as a cost effective solution for small organizations where the budgetary constraints are tighter. We are successful in getting the AP Checks printed using the above method.
References
Metalink Doc ID # 186640.1, Different Payment Formats â¦
Metalink Doc ID # 60936.1, Step by Step Guide to Setup a Printer in Oracle Applications
Metalink Doc ID # 250543.1, How to Create An Initialization String for a Payable Check Format
Metalink Doc ID # 48680.1, Accounts Payable FAQ â Payment Batch, Check
Metalink Doc ID # 1074792.6, Exclamation Point (!) Prints On Check When Using APXPBFEL And Cartridge
Metalink Doc ID # 158486.1, APXPBFEL Evergreen (Long Laser)
Metalink Doc ID # 146452.1, Listing of p_printer_code_mask Default Values for APXPBFEL
Chapter 2, Oracle Payables user guide
Appendix A
APLASP.prt printer codes explanation
code "200" esc "&l0o2a6d66p8.000c2e1x0l63f1H" esc "&k12.00H" esc "(8U"
esc "(s0p10.00h12.00v0s0b3T" esc "&k11.75H" esc "&a1l0R" control(M) esc"&f3005y4X"
{Portrait}
{Letter}
{6 LPI}
{Define Page Length to 66 Lines}
{Set VMI = 8.000/48"}
{Define Top Margin at 2 Lines}
{Select 1 Copies}
{Disable Perf Skip}
{Define Text Length as 63 Lines}
{Feed from Tray 1 (upper)}
0.1 esc "&k12.00H"
{Set HMI = 12.00/120"}
0.2 esc "(8U"
{Roman-8 Symbol Set}
0.3 esc "(s0p10.00h12.00v0s0b3T"
{Fixed Pitch}
{pitch 10.00 cpi}
{Point Size 12.00}
{Upright}
{Medium Weight}
{Typeface 3}
0.4 esc "&k11.75H"
{Set HMI = 11.75/120"}
0.5 esc "&a1l0R"
{Define Left Margin at Column 1}
{Move to Row 0}
control(M)
0.6 esc"&f3005y4X"
{Define Macro ID 3005}
{Enable Overlay}
code "201" esc "&f0S" esc "&a1.25r70C" esc "(8U" esc "(s1p14v0s3b4148T"
{Push Cursor Position} esc "&f0S"
1.1 esc "&a1.25r70C"
{Move to Row 1.25}
{Move to Column 70}
1.2 esc "(8U"
{Roman-8 Symbol Set}
1.3 esc "(s1p14v0s3b4148T"
{Proportional}
{Point Size 14}
{Upright}
{Bold}
{Typeface 4148}
code "202" esc "&f0S" esc "&a20.25r70C" esc "(8U" esc "(s1p14v0s3b4148T"
{Push Cursor Position}
2.1 esc "&a20.25r70C"
{Move to Row 20.25}
{Move to Column 70}
2.2 esc "(8U"
{Roman-8 Symbol Set}
2.3 esc "(s1p14v0s3b4148T"
{Proportional}
{Point Size 14}
{Upright}
{Bold}
{Typeface 4148}
code "211" esc "&f0S" esc "&f0y0X" esc "&l0E" esc "&a0L"
esc "(0Q" esc "(s0p8.00h8.40s0b0T" esc "&k15H" esc "*p907Y" esc "&a13.8C"
{Push Cursor Position}
11.1 esc "&f0y0X"
{Define Macro ID 0}
{Start Macro Definition}
11.2 esc "&l0E"
{Define Top Margin at 0 Lines}
11.3 esc "&a0L"
{Define Left Margin at Column 0}
11.4 esc "(0Q"
{0Q Symbol Set}
11.5 esc "(s0p8.00h8.40s0b0T"
{Fixed Pitch}
{pitch 8.00 cpi}
{Font Style 8.40}
{Medium Weight}
{Typeface 0}
11.6 esc "&k15H" esc "*p907Y"
{Set HMI = 15/120"}
{Vert position = 907 Dots}
11.7 esc "&a13.8C"
{Move to Column 13.8}
code "212" esc "&f1x3x8X" esc "&f1S"
{End Macro Definition}
{Call Macro}
{Delete Macro ID}
12.1 esc "&f1S"
{Pop Cursor Position}
code "221" esc "&f0S" esc "*t300R" esc "*p1500X" esc "*p470Y"
esc "(30C" esc "(4B" esc "(s1p53v0s0b102T!"
esc "&f0S!" esc "&f1S" esc "*p+121Y" esc "&f1S"
esc "&f0S"
{Push Cursor Position}
21.1 esc "*t300R"
{300 DPI Graphics resolution}
21.2 esc "*p1500X"
{Horiz position = 1500 Dots}
21.3 esc "*p470Y"
{Vert position = 470 Dots}
21.4 esc "(30C"
{30C Symbol Set}
21.5 esc "(4B"
{4B Symbol Set}
21.6 esc "(s1p53v0s0b102T!"
{Proportional}
{Point Size 53}
{Upright}
{Medium Weight}
{Typeface 102}
21.7 esc "&f0S!"
{Push Cursor Position}
21.8 esc "&f1S"
{Pop Cursor Position}
21.9 esc "*p+141Y"
{Move down 121 Dots}
21.10 esc "&f1S"
{Pop Cursor Position}
code "222" esc "&f0S" esc "*t300R" esc "*p1500X" esc "*p650Y"
esc "(30A" esc "(s0p.426h35.25v0s0b128T" esc "&f0S!"
esc "&f1S" esc "*p+141Y" esc "&f1S"
{Push Cursor Position}
22.1 esc "*t300R"
{300 DPI Graphics resolution}
22.2 esc "*p1500X"
{Horiz position = 1500 Dots}
22.3 esc "*p650Y"
{Vert position = 650 Dots}
22.4 esc "(30A
{30A Symbol Set}
22.5 esc "(s0p.426h35.25v0s0b128T"
{Fixed Pitch}
{pitch .426 cpi}
{Point Size 35.25}
{Upright}
{Medium Weight}
{Typeface 128}
22.6 esc "&f0S!"
{Push Cursor Position}
22.7 esc "&f1S"
{Pop Cursor Position}
22.8 esc "*p+141Y"
{Move down 141 Dots}
22.9 esc "&f1S"
{Pop Cursor Position}
code "241" esc "&a-100V" esc "&l5.8C" esc "(8U" esc "(s0p12.00h10.00v0s3b3T" esc "&k11.75H"
41.0 esc "&a-100V"
{Move up 100 Decipoints}
41.1 esc "&l5.8C"
{Set VMI = 5.8/48"}
41.2 esc "(8U"
{Roman-8 Symbol Set}
41.3 esc "(s0p12.00h10.00v0s3b3T"
{Fixed Pitch}
{pitch 12.00 cpi}
{Point Size 10.00}
{Upright}
{Bold}
{Typeface 3}
41.4 esc "&k11.75H"
{Set HMI = 11.75/120"}
code "299" esc "(8U" esc "(s0p10.00h12.00v0s0b3T" esc "&k11.75H" esc "&l6D"
{Roman-8 Symbol Set}
99.1 esc "(s0p10.00h12.00v0s0b3T"
{Fixed Pitch}
{pitch 10.00 cpi}
{Point Size 12.00}
{Upright}
{Medium Weight}
{Typeface 3}
99.2 esc "&k11.75H"
{Set HMI = 11.75/120"}
99.3 esc "&l6D"
{6 LPI}

AP Check Printing Time

Hi,
We currently implemented AP Check Printing using BI Publisher into our Production instance. We have noticed that printing is taking longer due to 3 pages processing and then a pause occurring. We expected a time increase because the checks are now duplex printing, but are not sure why it's pausing. Any suggestions would be great
Thanks
-CC

Hi,
We currently implemented AP Check Printing using BI Publisher into our Production instance. We have noticed that printing is taking longer due to 3 pages processing and then a pause occurring. We expected a time increase because the checks are now duplex printing, but are not sure why it's pausing. Any suggestions would be great
Thanks
-CC

Check printing report

Hi,
EBS R12.1
OEL 5.4
Is there a standard or sample check printing report in EBS, that we can use as template?
Thanks a lot
Ms K

Hi,
See if these documents help.
Note: 312353.1 - Check Printing Using XML Publisher
Note: 106504.1 - Payables Reports Frequently Asked Questions
Note: 110406.1 - Check Printing Frequently Asked Questions
Note: 459306.1 - XML Checkwriter/Deposit Advice
Note: 740727.1 - For Check Writer (XML) And Deposit Advice (XML) Can Custom Changes Be Made To Template?
Note: 560979.1 - Check Writer (XML) Concurrent Process Does Not Generate An Output When Using A Custom Template
Regards,
Hussein

Check printing using smartform

Similar Messages

Maybe you are looking for