Check Project lasts for hours

Hello,
My Encore 2.0 project has 7 timelines each with 20 min video, 2 audio channels and 5 subtitle channels. The project also includes about 50 interactive menus.
My problem is that Check Project lasts for hours with 100% CPU utilization. Is it a kind of bug, or could you provide me any hint to avoid this problem?
Best regards,
Evren Arin

The problem persists. I carefully followed the instructions on how to safely eject the Ipod from iTunes before disconnecting it from my computer. Nothing happened. However, when I close iTunes, I get the following message: "The Ipod cannot be ejected because it contains files that are in use by another application". What should I do now? P.S. I am very new to the Ipod world, so please forgive my ignorance.

Similar Messages

Losing connection with uverse at 830 every night and last for hours

Then come daytime my internet is just fine til 830 again each evening.Will come on and you can go to one page then it goes right back to "local access only" mode.

dwwsmp wrote:
Then come daytime my internet is just fine til 830 again each evening.
Will come on and you can go to one page then it goes right back to "local access only" mode.
Unluckily sounds like interference or dirty power causing these problems, dirty power solved by Tripp-Lite Surge Protectors.
Interference like these:
From ScottMac:
Have you notice the occurrances in the context of other events in your home, possibly outside your home, and (really happens) something in a neighbor's house?
A neighbor with a new kilowatt linear for his Ham or CB radio?
Maybe a blinky streetlight?
Any electrically-operated workout gear in your home (or neighbor's)?
Aquariums?
Heating Pads?
Light Dimmers?
Touch-control lamps?
Dusk/Dawn sensors on the porch?
Any new CFL bulbs (OK to be green, as long as you don't watch TV or listen to AM radio ... j/k ...)
From SomeJoe7777:
* Power line interference, such as:
* Fluorescent light ballasts
* High-intensity gas discharge lights like mercury vapor
* Grounding problems, such as improper ground at the NID, the pedestal, etc.
* Electrical system grounding problems, such as improper ground on the RG's outlet, the breaker panel, etc.
* HAM radio broadcasts in the HF band
* AM radio transmissions, such as a nearby radio station
Try to isolate any potential source of these problems and see if you can find one that eliminates the interference.
Chris
Please NO SD stretch-o-vision or 480 SD HD Channels
Need Help? PM ATT Uverse Care (all service problems)
ATT Customer Care(all other problems)
Your Results May Vary, In My Humble Opinion
I Call It Like I See It, Simply a U-verse user, nothing more

My Iphone 4 and my mac are suddenly synching without stop, on I tunes. Any ideas about what to do? This can last for hours.

Just today, when synching my iphone 4 with my mac, on itunes, I realized that it was not every completing the synch. On the progress bar on itunes it would get to step 2 of 4, and with either contacts of calendar, would just go on and on until I canceled the synch. Any ideas about what I can do?

Your profile v10.5.6
You need to be running v10.5.8.
If your software is up to date on your Mac, try restoring the iPhone.
http://support.apple.com/kb/ht1414

I AM UNABLE TO CONNECT TO ANY WEBSITE USING FIREFOX. EVEN THOUGH, I HAVE BEEN USING FIREFOX ON THE SAME COMPUTER FOR YEARS WITH NO DIFFICULTY. THE PROBLEM AROSE AFTER COMCAST, MY ISP, RECOVERED FROM A WIDESPREAD OUTAGE THAT LASTED 5 HOURS.

I SUCCEEDED IN TRANSFERING ALL MY BOOKMARKS TO GOOGLE CHROME. THIS WILL ALLOW ME ACCESS TO WEBSITES WHILE I WAIT FOR A METHOD TO REPAIR MY FIREFOX PROGRAM. IN A PREVIOUS MESSAGE, I EXPLAINED THAT I WAS UNABLE TO ACCESS ANY WEBSITE USING FIREFOX AFTER COMCAST, MY ISP, RECOVERED FROM AN OUTAGE THAT LASTED 5 HOURS. WHENEVER I TRIED TO CONNECT TO A SITE, A POP-UP MESSAGE APPEARED INDICATING: "UNABLE TO INITIALIZE THE APPLICATION'S SECURITY COMPONENT. THE MOST LIKELY CAUSE IS PROBLEMS WITH FILES IN YOUR APPLICATION'S PROFILE DIRECTORY. CHECK THAT THIS DIRECTORY HAS NO READ/WRITE RESTRICTIONS." I EVEN REMOVED FIREFOX FROM MY COMPUTER AND DOWNLOADED IT AGAIN, FIGURING THAT BY NOT MERELY USING AN UPGRADE, I WOULD BE INSTALLING A COMPLETELY FRESH DOWNLOAD. UNFORTUNATELY, I RECEIVED THE SAME DISAPPOINTING RESULT, WITH THE SAME POP-UP MESSAGE RE-APPEARING. HOWEVER USING BOTH GOOGLE CHROME AND INTERNET EXPLORER, I WAS ABLE TO CONNECT TO WEBSITES. SO I HAVE TO CONCLUDE THAT THE PROBLEM IS NOT WITH MY INTERNET CONNECTION.

Press '''START + R''' in keyboard to open the '''Run''' box(or '''start''' then '''run''') , type in the RUN box '''%APPDATA%''' (or copied in just i wrote, bold text) then click '''OK'''. A Windows Explorer window will appear, in this window, choose '''Mozilla''' then '''Firefox''' then '''Profiles'''. Each folder in the "Profiles" folder (e.g., "xxxxxxxx.default") is a profile on your computer (maybe is one file if you have only one profile).
see for more info : [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile folder - Firefox ]
try it, good luck
thanks again

I set up the the sync add on and had no errors.When I sync now I get"Sync encountered an error while syncing:Firefox sync server maintenance is underway..."I have gotten this mesaage for the last 10 hours.Should I wait or is there an issue with my setup?

I just loaded Firefox onto my laptop. I set up the the sync add on and had no errors. When I hit sync now I get "Sync encountered an error while syncing: Firefox sync server maintenance is underway, syncing will resume automatically." I have gotten this message for the last 10 hours. Should I wait or is there an issue with my setup? I checked the Mozilla sync server status and it listed no issues.

There was a server out last week. see below. now everything works great. thanks for the follow up.
To:
Subject: [Bug 744289] sync107.db.scl3 down
Do not reply to this email. You can add comments to this bug at
https://bugzilla.mozilla.org/show_bug.cgi?id=744289
Gregory Szorc [:gps] <[email protected]> changed:
          What    |Removed                     |Added
            Status|UNCONFIRMED                 |RESOLVED
        Resolution|                            |FIXED
           Summary|error in sync               |sync107.db.scl3 down
     Last Resolved|                            |2012-04-10 19:39:11
--- Comment #2 from Gregory Szorc [:gps] <[email protected]> 2012-04-10
19:39:11 PDT --- Well, this is embarrassing. It looks like one of our
servers was down and for whatever reason we didn't notice.
It should be working now. If you still see errors, please reopen this bug.
Configure bugmail: https://bugzilla.mozilla.org/userprefs.cgi?tab=email
------- You are receiving this mail because: ------- You reported the bug.

Projects won't load--computer just keeps "thinking" for hours!

When trying to work in iMovie, it gets hung up at the point where it is trying to load all of the stored projects. It just keeping "thinking" for hours until anything loads and by the my computer is frozen or locked up.

I have had the same issue over the last couple of days. Imovie just doesn't load up for me. I tried trashing the preference/plist but it still doesn't respond. any solutions?

My "big Mac" desktop iMac's fan occasionally runs rather loudy and the computer gets kind of hot. This may last for several hours. Is that normal and OK?

My "big Mac" desktop's fan occasionally runs rather loudly and the top of the computer gets pretty warm. This may last for several hours. Is that normal and OK?

Please check the article below for details on finding activities that are using a high percentage of the CPU. You may need to check when the computer is actually running hot to catch the culprit.
Runaway applications can shorten battery runtime, affect performance, and increase heat and fan activity

My battery barely lasts for 3 hours...

My battery barely lasts for 3 hours and won't charge while in use & the phone heats a lot.
The phone is only about 6 months old, will the battery be replaced under the apple warrenty?

Please read this message and also my message here maybe it helps in resolving the battery drainage for you.

Display Performance Summary for the last one hour

We use Oracle Enterprise Manager 10G Grid Control. In the Targets -> Hosts -> Performance tab, how do I create a view that shows the performance summary every hour. The View Data dropbox has only the following options :
Real Time : 30 Second Refresh
Real Time: Manual Refresh
Refresh Last 24 hours
Refresh Last 7 days
Refresh last 30 days
I want to setup a custom option so we can run the report for whatevery period we want like hourly.

What about
creating a Group, include those hosts that interest you
select the Group you created
Launch the Dashboard (Button at right top)
Select Customize (Right Top)
Set proper refresh rate, metrics etc.
Regards
Rob
http://oemgc.wordpress.com

Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried

Updated to Adobe Muse 2014 this morning and have worked in it for the last 8 hours. Now when I try to publish the updated site to Business Catalyst for my client to preview it crashes everytime. I have tried just publishing altered files only, then tried the whole site again, and then tried publishing as a new site altogether. Thought I would then try to export as HTML in the hope of uploading the files via an FTP client and Muse crashes and locks up again. I am extremely stressed about this as I am in the last few days of of website I have been working on now with no issues since December. We are due to go live and my client needs to see it. I am desperate for an answer. It is not looking good. I am on an Apple Mac and have not had any isses publishing it for the last 6 months. Not very happy to say the least. Need desperate help.

Hi Zak, I got onto Adobe Customer Care Live Chat this morning and gave them the error message. After some trouble shooting with them it appears the older archived file of the site still publishes. I have now reverted back to the old file and copied and pasted out of the new file and from some ideas given to me by support I am now able to publish to Business Catalyst. It seems there was something corrupt within the new pages added yesterday. I have no idea if this would have still happened if I hadn't updated but I am glad it wasn't a Muse specific problem. I am loving using Muse and the support from Adobe has been excellent. Thanks everyone. By the way I do love the new version and apart from this hick up that lost me a few hours, aged me some more and gave me grey hair I really love Muse. Thanks again.

When I use my Apple ID for the last 12 hours I get this response: "There was an error in the App Store. Please try again later. (4)". How do I get around this? Try two apple ID's. Same thing.

When I use my Apple ID for the last 12 hours I get this response: "There was an error in the App Store. Please try again later. (4)". How do I get around this? Try two apple ID's. Same thing.

What does it mean when I get...: Apple Support Communities
'there was an error in the App Store....: Apple Support Communities

I use BB Bold 9790 and my battery which could at least,last for a day now at most,lasts for an hour

I use BB Bold 9790 and my battery which could at least,last for a day now at most,lasts for an hour and half.
The phone heats up so much that I am always forced to plug out the battery always.
Please help cos I love the device!
An more so can't afford to buy a new one cos its a little pricey.

Oh, then reread Post 2 please, for the last paragraph gives you options to proceed with. Not knowing which you desire to use, I'll just give you a bunch and you can choose.
The simplest way is to, on a PC (you cannot do this on MAC):
1) Make sure you have a current and complete backup of your BB...you can find complete instructions via the link in my auto-sig below.
2) Uninstall, from your PC, any BB OS packages
3) Make sure you have the BB Desktop Software already installed
http://us.blackberry.com/software/desktop.html
4) Download and install, to your PC, the BB OS package you desire:
http://us.blackberry.com/support/downloads/download_sites.jsp
It is sorted first by carrier -- so if all you want are the OS levels your carrier supports, your search will be quick. However, some carriers are much slower than others to release updates. To truly seek out the most up-to-date OS package for your BB, you must dig through and find all carriers that support your specific model BB, and then compare the OS levels that they support.
5) Delete, on your PC, all copies of VENDOR.XML...there will be at least one, and perhaps 2, and they will be located in or similarly to (it changes based on your Windows version) these folders:
C:\Program Files (x86)\Common Files\Research In Motion\AppLoader
C:\Users\(your Windows UserName)\AppData\Roaming\Research In Motion\BlackBerry\Loader XML
6a) For changing your installed BB OS level (upgrade or downgrade), you can launch the Desktop Software and connect your BB...the software should offer you the OS package you installed to your PC.
6b) Or, for reloading your currently installed BB OS level as well as for changing it, bypass the Desktop Software and use LOADER.EXE directly, by proceeding to step 2 in this process:
http://supportforums.blackberry.com/t5/BlackBerry-Device-Software/How-To-Reload-Your-Operating-Syste...
Note that while written for "reload" and the Storm, it can be used to upgrade, downgrade, or reload any BB device model -- it all depends on the OS package you download and install to your PC.
If, during the processes of 6a or 6b, your BB presents a "507" error, simply unplug the USB cord from the BB and re-insert it...don't do anything else...this should allow the install to continue.
You may also want to investigate the use of BBSAK (bbsak.org) to perform the wipe it is capable of.
You may also want to try the "Bare Bones OS Reload Procedure" to attempt to narrow down the precise causal item:
Load your OS "bare bones"...if anything is optional, do not install it.
If the behavior presents immediately, then try a different OS with step 1
If the behavior does not immediately present, then run for as long as it takes for you to be sure that the behavior will not present.
Add one thing -- no matter how tempting, just one.
If the behavior does not present immediately, then again run for long enough to be sure it will not have the same problem
Repeat steps 4 and 5 until all things are loaded or the behavior presents
When the behavior presents, you know the culprit...the last thing you loaded.
If the behavior does not re-present, then you know that either step 1 or 2 cured it.
If the behavior presents no matter what, then you likely have a hardware level issue for which no amount of OS or software can cure.
You may also need the use of these tricks:
KB10144 How to force the detection of the BlackBerry smartphone using Application Loader
KB27956 How to recover a BlackBerry smartphone from any state
http://crackberry.com/blackberry-101-lecture-12-how-reload-operating-system-nuked-blackberry
If you are on MAC, you are limited to only your carriers sanctioned OS packages...but can still use any levels that they currently sanction. See this procedure:
KB19915How to perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Battery only lasts for about 7 hours after Update to IOS 4.2.1

Hello folks,
after I have updated my Iphone 3G to the newest firmware (4.2.1) may battery only lasts for about 7hrs in standby-mode (no tethering, umts, wifi, whatsoever), while it has been much much better before.
Does anyone of you have the problem or a solution for it?
Thanks,
Alex

I'm happy to tell you that the problem, at least for myself, is gone. I checked around on the forum and apparently it could be so that something went wrong when updating to 4.2.1 so restoring the phone from itunes could be the fix. I did so and the problems seams to be solved.
/Ola

How to make report for last 24 hours?

Hello,
I have a little problem, I can't make report for last 24 hours.
Example:
If I am running report on 2.1.06 at 14:00, I want to get results from 1.1.06 14:00 to 2.1.06 14:00.
How do i make a report with this selection?
Because,if I choose date from 1.1.06 to 2.1.06 and
hour 14:00 to 14:00, I will only get results on 1st and 2nd on 14:00.
If I choose 1.1.06 and 2.1.06, 14:00 to 24:00, I won't get results for 2.1.06 from 0:00 to 14:00.
Because all selections use AND to get results.
How can I choose that system compare selections with OR?
How can I get results for last 24 hours?
Best regards,
Uros

Hi,
define a structure in your query with two entries. First one with 1.1. and > 14:00 and second one with 2.2. and < 14:00. Perhaps you need to fill the structure by user exits.
Hope it helps,
Leo

Ever since I got the new update 5.1 my iPod's been dying faster. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason(even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? lagging too

Ever since I got the new update 5.1 my iPod's been dying faster, even after I charge it. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason (even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? It's lagging as well..

Some Users have Reported that a Restore as New has helped Resolve issues...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

Check Project lasts for hours

Similar Messages

Maybe you are looking for