Check_requirements - When updating ST-PI thru SPAM

Hi Experts,
I am applying SAPKITLQG8 package and I am getting the following message :
Phase CHECK_REQUIREMENTS: Explanation of the Errors
Open Data Extraction Requests
The system has found a number of open data extraction requests. These should be processed before starting the object import phase.....find more information about this problem in the SAP notes 1081287,1083709 and 328181.
I read the notes and it says:
Call transaction SE38 and create a new report with the name RMCEXCHK. Maintain the following text symbols for the report:
001     Check for unprocessed logistics extraction data
002     No open V3 updating requests found.
003     Open V3 updating requests found!
004     No queue entries for logistics extraction found.
005     Unprocessed queue entries for logistics extraction found!
006     No data in setup tables for logistics extraction found.
007     Check found data in setup tables for logistics extraction!
008     No data in buffer MC12_PUFFER found.
009     Check found data in buffer MC12_PUFFER!
Then implement the attached source code.
I have no idea how do I create the report in SE38. anyone please suggest or give any link where I can read more.
Thanks

HI,
Do and check the following:
1. go to se06 and click perform post-inst......
2. check stms
3. go db02 and see if any of the tablespaces are full. increase if needed.
4. work/apply in client 000
5. dont use DDIC user to apply.
Try this then it should work. I had same error last week but my prblem got solved by going to se06 and stms and save...
thanks,

Similar Messages

  • After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!

    After prompted to update 10.9.1, my MacBook Pro updates and went thru restart but failed...I tried to start my book and gray screen, Apple logo both on, chime sounded, then went to progress bar, less than half macbook shuts down...did few times, same!!
    Go to system repair, there is a prompt that cannot repair live etc....I don understand!!! Help, I need the book for work tomorrow!!

    Thanks clintonfrombirmingham...
    After clicking "repair disk" it says DISK UTILITY STOPPED REPAIRING MACINTOSH HD, DISK UTILITY CAN't REPAIR THIS DISK. BACK UO AS MANY OF YOUR FILES AS POSSIBLE, REFORMAT THE DISK, AND RESTORE YOUR BACKED -UP FILES....
    written in red: ERROR: DISK UTILITY CAN'T REPAIR THIS DISK,,,DISK, AND RESTORE YOUR BACKED-UP FILES.
    how can I back up when I cannot even start my macbook? I am stuck here and have lots of important files in the hd... Please help me? Thanks you!

  • Why, after updating plug-ins thru firefox's system [specifically adobe acrobat 10.1.4.38] it doesn't recognize it and says I need to update ?

    This has been happening on & off for awhile. I've tried updating thru firefox, uninstalling & updating in firefox, and within acrobat. It says its updating but the version doesn't change & can't find any evidence it did. Even uninstalling it still reinstalled 10.1.4.38 - the same version I've had since started using firefox.
    By the way, today I updated 'Shockwave Flash' thru same place & update said it still needed to update (cant remember which version it said) but I had disabled ''Shockwave for Director'. When I enabled it the update stopped saying it needed Flash update.
    Any chance there is a link between Acrobat & something else similar to the 'Director' that will assist in update recognizing it? A distant cousin-program?

    Thank you so much jscher2000. You must be a '''God of Geeks''' cause nobody would tell me what they are all for & whether I needed them or not. And there you just rattled them off like it was no effort at all. You are my lucky day - the kind that only happen once a year. Thank you, me & my freshly broken leg will appreciate it and now I'm downloading that Secunia program. Gonna find them buggers and fix my 'puter good! HAHA! 8)

  • EDT Cat. 15 Data loaded to SAP but failed when updating

    Hi,
    I have an structure to load data into BP using KCLJ with Cat 15.
    Here it is.
    AKTYP
    TYPE
    PARTNER
    ROLE1
    KUNNR
    KUNNR_EXT
    BU_GROUP
    FIBUKRS
    CHIND_ADDR
    NAME_CO
    NAME_ORG1
    NAME_ORG2
    STREET
    STR_SUPPL1
    STR_SUPPL2
    STR_SUPPL3
    LOCATION
    HOUSE_NUM1
    POST_CODE1
    CITY1
    COUNTRY
    REGION
    LANGU
    CHIND_TEL
    TEL_NUMBER
    TEL_EXTENS
    We had the data loaded to SAP with ROLE 000000 and TR0100 but somehow when we tried to update the address thru ROLE TR0100, we had a dump and failed to update. However, the update is good when we use ROLE 000000 to update.
    Anyone would have a clue of this?
    Thanks

    I am new to EDT also. I know Cat 15 which can load BP. SAP has more categories which can load more using KCLJ. Here's my experience.
    Under Tcode SIMGH, find IMG structure External Data Transfer for SAP Banking. Under that structure, you can find Display Required and Optional Entry Fields for SEM Banking. When you enter 15 in the Category box, you'll see a whole list of fields about BP. You can use these fields to create your own structure.
    After you created your structure, use Define Sender Structure under External Data Transfer for SAP Banking to define your structure. After that, it is done. You can try use KCLJ to load your BP.
    If you still have other issues, mostly will be the configuration.
    Enjoy.

  • When I click, my computer spam clicks on what I clicked on.

    So basically when I click my computer spam clicks whatever I clicked on. For example, if I click on a text file on my desktop, the file gets opened like 50 times and eventually my computer crashes. I am using a HP Pavillion 2022uk and a Razer deathadder 2013 mouse.
    I only got the mouse at christmas so idk maybe it's the mouse..
    Is it the computer or the mouse? How can I fix this?

    Hi Matt,
    Hey, did your PC work as advertised prior to the new mouse?
    Did you install supplied mouse drivers, if needed, and are there any updated drivers?
    Can you tweak any settings on the mouse? Can you try the mouse on a different PC?
    Sounds like a driver problem.
    I did see a post on a gaming forum stating the mouse was very sensitive and you may be accidentally causing multiple commands to execute because of the way you are holding the mouse. Just a thought!
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos" if advice received is relevant or" Accept as Solution" if your problem has been solved.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++
    H8 1380t CTO, Intel i7 3820
    16 GB DDR3
    Pegatron Motherboard- IPIWB-PB (Pittsburgh), Radeon HD 7570 1GB. Win 7 Home Premium upgraded to Windows 8.1 Pro.
    Envy Phoenix 810-150se, Intel i7 4820k
    16 GB DDR3
    Pittsburgh2 Mainboard, NVIDIA GTX 645- 2GB GDDR5. Win 8.1 Pro.
    HP 560z CTO AMD Phenom II X6 1090T
    16 GB DDR3.
    Radeon HD 6570
    Win 7 Home Premium upgraded to Win 7 Pro.
    HP ENVY 17t-j000 CTO Quad Edition Notebook. I7 4702mq
    12 GB DDR3
    Nvidia Graphics
    Win 8 Pro
    Errare humanum est.

  • Error message when updating Itunes...can not open Itunes program

    I am recieving error message when updating Itunes for my computer.  The error message reads "MSVCR80.dll is missing and the other error message reads Error 7  (Windows error 126)"  I can not open my Itunes.  I have reloaded the Itunes onto my computer but still have the same error messages.  Please help.

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99364)

  • IPad app store "unknown error" message when updating app

    iPad app store "unknown error" message appears when updating app

    Kathryn,
    Had the problem also.  Found in the forums and it worked for me:
    go to settings
    go to app store or "store" on my ipad
    click on the apple id
    sign out
    sign in, again with id and password
    then do update.
    Hope this helps.

  • HT4623 please help me when update my i phone 3G i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

    please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

    Sounds like your phone was hacked to use with your carrier.  Updating it has relocked the phone to it's original carrier.  You will not get the phone working again without a SIM from the original carrier.

  • My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but  when reinstalling I get an older version is installed and cannot be removed. I need a soluti

    My ITunes got corrupted and I kept getting a message when updating iTunes64msi missing so I uninstalled all files and I thought I removed all registry values but  when reinstalling I get an older version is installed and cannot be removed. I need a solution.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • After itunes 6.0.2 and 1-10 updater - both ipods crash itunes when updating

    I'm annoyed.
    I upgraded my to iTunes 6.0.2 (Windows XP) and ran the 1-10 updater on two ipods - a mini and a 20GB pre-photo model (I guess that's a 3rd gen?). After doing so, iTunes crashes when updating begins. If I plug an ipod in without iTunes, everything is OK and I can see the unit and directory structure in Explorer. When the ipod is disconnected and I run iTunes, everything is fine - no problems. But when you connect an ipod, iTunes sees it, and then shows "Updating ipod", it sits like that for awhile, then I hear the hard drive in the iPod click, and a few seconds later I get:
    "iTunes has encountered a problem and needs to close" etc. etc.
    I tried doing a restore of one of my ipods (the 3rd gen) to the 2005-11-17 firmware by running that updater and doing "Restore". The problem is still happening, but now my ipod is empty because I did the restore!
    Unfortunately, I can't tell what the problem is - iTunes or the 1-10 update.
    Has anyone else had any problems like this? Any ideas? Can I downgrade iTunes?
    Please help!
    Chris

    Has anyone come up with a method to resolve this issue? I uninstalled and reinstalled iTunes, and no luck.
    One very obvious thing I can see is that 2006-1-10 update clearly bombs iTunes fast. I downgrade my firmware to 2005-11-17 and it appears to want to update. I'm attempting to update again (about the 30th time since I've had this problem a few days ago). Let's see how it goes since I've actually done this before... One thing I'm doing differently though is syncing just the podcasts, no music. It shouldn't make a difference, but maybe there's something odd in there with DRM?
    Another observation - when I connected the iPod with the My Computer window open, I saw the H: drive (my ipod) appear for a few seconds. It then disappeared from there, iTunes came up, and then reappeared. iTunes tried to sync, but then bombed out.
    I hope this helps someone..
    I can't believe that Apple hasn't responded to this issue yet. This has to be impacting more than a few hundred users on this site.

  • How can I get my iPhone to stop promting me to enter my wife's Apple ID when updating apps? I've checked settings for iTunes

    How can I get my iPhone 6 to stop prompting me to enter my wife's Apple ID when updating apps? I have verified in settings that my acct is listed in itunes & App Store, as well as icloud. i can download new apps fine. Have shut down phone and re-powered, have tried plugging into my iMac while signed into my iTunes acct. Can't figure out what to do next?

    Is the comp a synced device to your apple ID and approved as an active device for this synchronization?
    Just cloud the sync once, activate the comp to your apple I'd in iTunes, ensure all software is up to date, turn on home sharing between the devices and you can reinstall the apps from the apple id purchase history via download.
    You basically cleaned out the canonical data apple uses to validate all that, which was backup data. Like iOS devices have the purchased option on the App Store now, syncing the devices via the home sharing and properly activating them will give your comp the purchased cloud and free up 10gs of space on the precious solid states smaller drives.
    Hope that helps...
    If you need to know the menu to find this info, let me know. But the info is easily accessible in the help menu.

  • I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

    I have bought an iMAC second hand but when updates to purchased (not by me) Apps I cannot download the updates as it is asking for the original owners password. How can I amend this or could I delete the Apps and download new ones in place under my email

    If the machine was upgraded to Lion 10.7.x by the original owner then you bought an illegal license of Lion and also of any other applications that the seller  said came pre-installed, this assumes the seller did not include original install media. In that case you need to contact the seller for the original install DVDs that came with the machine re-install up to Snow Leopard 10.6.8 and then purchase Mountain Lion ($20) and the applications you want or need. If the seller cannot come up with the original install discs then you can buy them from a nominal cost from AppleCare..

  • HT4623 I lost my maps icon when updating.  How can I get it back

    When updating the software on my iphone, I skipped the area where you put in your Apple ID.  Now I do not have the maps icon.  How can I get it back?

    Well now I was able to download a back up disc for my windows 8 and try to load it and set the laptop to run the d: drive upon startup and not able to in BIOS can someone do a peint screen of the boot order screen

  • Error in replicat when updating a row

    Oracle 11gR2
    OGG 11.1.1.1.5
    I am getting the following error when updating a row that exists in both the target and source db:
    OCI Error ORA-01403: no data found, SQL <UPDATE....The following is in the discard file:
    Record not found
    Mapping problem with compressed key update record (target format)...
    ...The row DOES exist in the target db for sure. But for some reason it thinks that it is not there...why?
    Here are the exact steps I did:
    1. Created a table in source
    2. Create the same table in target (explicitly not through replication as we have an exclude filter on 'CREATE')
    3. Inserted rows into source table (which were replicated to target table).
    4. Delete a row in the source table (which were not applied to target as I am using the IGNOREDELETE parameter)
    5. Update a row in the source table (this is where I got the above mentioned error 'ORA-1403' even though the row does exist.)

    mb_ogg is very likely right - you forgot to "add trandata" as that's the number one most common reason for an ORA-1403 (ANSI 100) no data found error.
    The problem is that Oracle does not automatically log the PK, it only logs that which changed. Down at the replicat on the target it tries to update but the WHERE clause has PK = NULL because it was not logged in the redo. To have it logged in the redo so that the target UPDATE statement has a correct value for PK, you need to use GGSCI to issue "add trandata," which performs an "ALTER TABLE ADD SUPPLEMENTAL LOG GROUP ... ALWAYS".
    "INFO TRANDATA", if using OGG version 11.2+ on Oracle it will tell you if logging is enabled on a table and for which columns.
    Good luck,
    -joe

  • Error when updating pages from template

    When updating pages from a template I have been occasionally
    getting this error message:
    While executing onLoad in Swap Image.htm, the following
    JavaScript error(s) occured:
    At line 325 of the file "Hard Drive: Applications: Macromedia
    Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
    Reference Error: createObjRefs is not Defined
    I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
    Any ideas on how to fix this?
    Thanks,
    Paul

    When updating pages from a template I have been occasionally
    getting this error message:
    While executing onLoad in Swap Image.htm, the following
    JavaScript error(s) occured:
    At line 325 of the file "Hard Drive: Applications: Macromedia
    Dreamweaver 8: Configuration: Behaviors: Actions: Swap Image.js":
    Reference Error: createObjRefs is not Defined
    I am on a Mac running 10.3.9, Dreamweaver 8.02.2809
    Any ideas on how to fix this?
    Thanks,
    Paul

Maybe you are looking for

  • Can not save jpeg file

    I wish to capture jpeg images from my webcam and keep them in webserver so that live video can be downloaded. Because my adsl connection can upload @ max. 256 kbps, I can only transmit 2/3 frames per second. But for testing purpose on local machine I

  • Report Generation Toolkit and Office 10 - build errors

    Using LabView 2011 and Report Generation Toolkit 2011. After installing Office 10, I would get build error for Excel-Print.Vi and Excel-SetCell.vi and build is then aborted. 2011/vi.lib/addons/_office/_excelsub.llb/Excel-Print.vi. Says it is unable t

  • Payment to Vendor by bank transfer with out useing APP

    Dear all, I of our Client has issue-- that i want post a wire transfer to vendor with out using APP. thanks & regards krishna reddy

  • Transporting Developmenrts from PI DEV to PI Prod

    Hi Experts,                     in my PI server, when ever I do a development in the ABAP stack, I release and transport the request to Basis. And In case of developments in Java stack, I use Change Management Service - Transport Studio   to move it.

  • Buffer Table not upto date

    Hi All, I am facing the same issue while creating and accepting a service entry sheet via BAPI_ENTRYSHEET_CREATE in a report . I get a pop up message S001 (Buffer table not upto date) in ML81N. Though, it is not an error message it delays the further