Check table-existance

How can I check if a DDIC-table is really existing? Is there any FM for that?
And which data-element can I use to have a search help that only allows choosing existing tables?
Thanks a lot!
Regards
Markus

Hi,
You can validate by quering table : DD02L.
Regards,
Navneeth K.

Similar Messages

Check table TFBEFU_CR: entry 10 does not exist

Dear all
When i am doing GR for Order (T.Code : MB31),the system displays the following message.
Check table TFBEFU_CR: entry 10 does not exist
plz give me the solution as early as possible,bcaz it is very urgent to me.
Thanks in advance.
Regards
Basava sreenu

Dear Mr.Basava,
I'm not sure,but try with this.
For the particular material which you are using in MB31 for Good's receipt for
Order,check whether the storage location is present in T code MMSC-Extend
material storage location.If not add and save,then try in MB31.
If useful reward points.
Regards
Mangal

Error "Check Table TFBEFU_CR : entry 10 does not exist" getting

Hi All ,
While doing Goods Receipt for Prodn Order , error "Check Table TFBEFU_CR : entry 10 does not exist" getting Prompted.
Could u pls help me to solve it
Regards
Sandeep

you need to apply the OSS note 107588. it is excatly for the same problem yoy mentioned here.
check the note

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

How do I check if a table exists

I have some embedded SQL statements to create tables and indexes
in a database. These tables may or may not already be there. I
would like to be able to drop the table(s) first, then create
them. Unfortunately, an error is generated if I drop a table
that does not exist.
Can someone send me the proper SQL command to check if a table
exists before dropping it in Oracle?
TIA
Eric
null

I have some embedded SQL statements to create tables and indexes
in a database. These tables may or may not already be there. I
would like to be able to drop the table(s) first, then create
them. Unfortunately, an error is generated if I drop a table
that does not exist.
Can someone send me the proper SQL command to check if a table
exists before dropping it in Oracle?
TIA
Eric
null

In MB1C im getting error-"Check table T004F: entry G006 does not exist"

DEAR SIR,
WHILE DOING MB1C IN MOVEMENT TYPE 561 I M GETTING THI ERROR -Check table T004F: entry G006 does not exist.
PLZ HELP ME HOW TO SOLVE THIS PROBLEM.
THXS AND REGARDS,
DEBESH TRIPATHY

Check these threads
[Check table T004f: Entry G006 Does not exist |Check table T004f: Entry G006 Does not exist]
[Posting Material |Re: Posting Material]
[Error in MBIC|Error in MBIC]
thanks
G. Lakshmipathi

How to check if internal table exists in dynamical called subroutine ?

Hi,
in a dynamically called subroutine i'm using a internal table, but in some calls this table is not exist.
How can i check in the code whether the internal table exist or not ?
regards,
Hans

In Horst Keller's blog /people/horst.keller/blog/2005/05/27/abap-geek-10--everything-functions-150-but-how my issue is talked about :
All other parameters are handled in a way as they were declared as global data objects in the top include of the function group, that can be used only during the execution of the function module: They are visible throughout the function group but you can access them only while the function module is active. If you access such a parameter and the respective function module is not executed, you get the runtime error GETWA_NOT_ASSIGNED (Why? Well, technically thos guys are represented via field symbols which are valid only during the runtime of the function module).
The code is in SD pricing. Sometimes the code is called from function module PRICING_BUILD_XKOMV or PRICING_SUBSCREEN_PBO where TKOMV is defined as globalized parameter.
And sometimes it is called from function module PRCING_CHECK where TKOMV is NOT defined as parameter.
In the call of last function the dump occures on the ASSIGN statement :
     data: ls_tkomv like line of tkomv,
              lv_tablename(30) type c value 'TKOMV[]'.
    field-symbols: <lfs> type any table.
     assign (lv_tablename) to <lfs>.
     if <lfs> is assigned.
Any suggestions to solve the issue ?
regards,
Hans

How to check if database/table exists in MYSQL

I am writing a program which accesses databases in MYSQL, is there any way to check if the databases exists on the MYSQL server and if not create one && to check if a table exists and create one of if it does not

OK, found out that as special permissions needed to create databases I assume it cannot be done via my app but how about Tables

Is there any function to check whether table exist in the dictionary

In the program, i want to dynamicly check whether the table exists in the dictionary, and return the result to me.

hi
good
i dont think there is any such function to check the presence of the table.
bcz you can check it directly in se11 rather than using any function.
thanks
mrutyun^

How can I write a SQL statement which checks if a table exists?

How can I write a SQL statement which tells me whether a table exists?

execute an sql query: select * from <tablename>
catch the exception n check whether the erroe code
matches the one that occurs for table doesn't exist
that's itHow is your answer any different from the one given in the first reply?
It isn't.
As WorkForFood says DatabaseMetaData has a bunch of methods for getting information about tables but this is more useful when you don't know the names of any of the tables.. it sounds like you do so I would concur SELECT from table is probably the quickest way to go. If it helps the Xopen error should be either S1000 or 42S01 (I think) but I would try and see if there is a specific vendor code for table not found/not exists error and check for that.

RSRV Check Check if characteristic values of text table exist in SID table

Hello Guys,
I have run the RSRV check Check if characteristic values of text table exist in SID table and I got a warning
when I check the Text table and compare it to attribute table, total entries in text table is more than entries in attribute table..
TEXT TABLE DONT HAVE ANY LANGUAGE...
is it possible that there are more entries in text rather than attributes... again THERE are no language..
Many Thanks

try to do a 'select * from table' and catch the
exception as it might fail if the table doesn't exist.Which might take quite a time if the table is big! If you really want to do that I'd use SELECT * FROM table WHERE 1=2
A better way is, to ask the DatabaseMetadata object to retrieve information about the table...
Thomas

How can I check whether or not an database table exists?

Hi,
I am new to ABAP programming. And now I want to write an function that check whether an table exists in the dictionary.
It request the table name was given by the user input. So I have to check it dynamically.
Please give me some guide if you know about that.
Thanks.

Hi,
All the table names exist in DD02l table.
Fetch data from DD02l table by passing selectin screen parameter .
REPORT ysdn_new .
PARAMETERS: p_tab LIKE dd02l-tabname.
DATA: v_tab LIKE p_tab.
SELECT SINGLE tabname INTO v_tab FROM dd02l WHERE tabname = p_tab.
WRITE v_tab.
If ypu want to fetch from TADIR table only means you have to pass selection screen parameter in place of obj_name and TABL for OBJECT field.
SELECT SINGLE tabname INTO v_tab
FROM TADIR
WHERE obj_name = p_tab
AND object = 'TABL'.
This is other way of getting table name by passing selection screen parameter
this will work.
Please reward points if helpful...
Regds
Sivaparvathi

Entry does not exists in check table -- Validation

Hi friends..,
I am able to create new entries in my table with INSERT statement through a function module.
But, the problem is..,
I am having one key field in my table, and T1(another table) is check table for this.
So while creating the entries through SE11, its giving error message like ENTRY DOES NOT EXISTS IN CHECK TABLE. But the same entry i am able map through my function module..!
Any extra settings reuired for this..?
Or.,
Am i need to write validation code?
Thanks,
Naveen.I

Hi...Rama chary..,
I am having separate function modules to do this..!
So here I can't to update two table at time.
My function module updating a table field with out checking it wrt its check table..!
Even i write code to check table , it will not meet the functionality of SE11 error..!??
so what can i do..?
Thanks,
Naveen.I

In MVT 545 Check table XEKPO: entry 00000 0000   does not exist

Hello
While using the mvt type 545 with MB1C (Included in mvt)
I am getting the following error what could be the possible reason
Check table XEKPO: entry 00000 0000   does not exist
    Message no. M7001
Diagnosis
    In table XEKPO the entry 00000 0000   is missing.
Regards
Niti Narayan Chaturvedi

This is a authomatic mvt, But I am using a manual route to excecute, is this causing problem
Where is the check for the automatic mvt
Niti Narayan

Error:Check table 158:entry COR6N doesn't exist

Dear PP Gurus
When i am trying to do confirmation( COR6N) an error is coming "<b>Check table 158:entry COR6N doesn't exist</b>".
Can u pls suggest why this is happening...........???
Regards
Ragesh

Dear Padosh/Murugesh
By mistake...i had given full points...
Mr Pradosh only first suggested that sol'n, so Murugesh i have given to u vry helpful answer
Regards
Ragesh
null

Check table-existance

Similar Messages

Maybe you are looking for