Check that GI cannot be cancelled after GR has been done.

Hi,
The user is complaining that even though he has posted goods receipt for the delivery of a stock transfer order, he is able to cancel the goods issue using 'VL09'. The system should block cancellation of goods issue after goods receipt is complete. Any special setting for this?
Thanks and regards,
Kasturi

hi friend
tell me clearly
with regards
dinesh

Similar Messages

Changing Header/Item condition after billing has been done

Hi,
I have an issue in which the sales order is incomplete but invoicing has been done. On seeing the change log I found that new condition type has been added after generation of invoice.
Now the user wants that entire header/item condition screen should be greyed out after creation of billing document. can it be done through config or user exit is the way,
My apologies if I posted at a wrong thread.
Thanks
Subhadeep

Hi,
There is no mechanism to find out if the billing document has been created and sales order will allow changes to pricing even after creation of invoice.
The point is that, it doesnt matter if the sales order is changed after the invoice has been created, since the values from SO has gone into billing.
However, if you still wish to lock changes to order once it is billed, kindly refer to some userexit like MV45AFZZ which works during sales order processing and you may get the billing status from VBUK and VBUP tables.
Regards,
Amit

X200 cannot sleep/hibernate after WWAN has been used

Since upgrading to Windows 7 I experience problem using Sleep or Hibernate.
If I have been using WWAN (the Ericsson card) the computer will not Sleep or Hibernate afterwards (sometimes it will work, maybe 1 out of 10 times). The computer will start preparing for Sleep/Hibernate and will switch off the screen. But it never finished (caps lock will not work, but the HD LED can be seen blinking every 3 second or so) and will stay on until the battery is drained or a hard reset is performed.
It was working ok in the beginning after installing Window 7, but stopped working somes in june/juli this year.
/MF

HI, thanks, but I know I can set a new password. I just wanted to get my old one back cos I have used it a long time & can therefore remember it.

I have created a site but can't open it in iweb after it has been done.

I created a site using iweb, and then tried one of the free templates that a website was offering. After I open the template I was no longer able to open the site I created. I can locate the files in the Sites folder, but it will not allow me to open it.
Does anyone know what I can do so I don't have o recreate it all over? This would be a total nightmare!
Thanks,
RandyfromLacey

If the files are in your sites folder, then iWeb will never be able to open them because they contain your published site. iWeb has no import facility so is unable to open html pages - a previously published site.
You need the data storage file called domain.sites to be able to access your site again. This can be found under User/Library/Application Support/iWeb/domain.sites. Find this file and double click it and iWeb will open it.
Note that you need to look in your User Library and not your System Library, as you won't find iWeb there.

How to forbid any further changes for PO (QTY and price ) after it has been

Hi,
How to forbid any further changes for PO (QTY and price ) after it has been done GR and LIV? Thanks.

Hi,
Price anyway cannot be changed once GR is posted on the PO item, it can be changed only by cancelling the GR, the same applies to IR too.
But quantity can be changed at any time.
So if you are looking at blocking qty too, then a customized message through save exit is the option, I am not aware of any standard SAP messages that can be configured to achieve this..
Ramesh

Have been advised by my email provider (recently blocked account requiring password reset) that they will only reset the password after a proven anti viru and malware scan has been done on ipad and iphone. Is this necessary and if so what do i use

Have been advised by my email provider (recently blocked account requiring password reset) that they will only reset the password after a proven anti virus and malware scan has been done on ipad and iphone. Is this necessary and if so what do i use

As KP has pointed out, there actually aren't any anti-virus programs in the App Store. There are a few that allow you to scan e-mail or stuff like that, and a few that provide you with information about malware and new threats for other systems. But none are available that can scan your iOS device for malware, because the security restrictions in iOS do not permit any apps to have that kind of access to anything. Which means that you also cannot be infected with a virus (unless you have jailbroken your device).
If your account got compromised, that had nothing whatsoever to do with your iPad. Someone simply hacked it remotely. Happens all the time. It's really amazing that, in this day and age, e-mail providers are so ignorant of technology and how their own systems get compromised that they would try to require you to run software that does not exist!

Tiles- Cannot forward after response has been committed Error

I am trying to use following approach for my tiles implementation but i am getting error like
java.lang.IllegalStateException: Cannot forward after response has been committed.
I have gone thorugh the other posts regarding the same error but not helping me.
Any clues greatly appreciated.
Thanks,
Sachin
"I haven't found a way to directly dispatch to a tiles definition, but you can eliminate the need for multiple "wrapper" JSPs by creating a single "tilesDispatch" JSP that is able to dispatch to different tiles definitions, and establishing a convention for mapping URLs to that JSP, and identifying the tiles definition you want to load.
For example, you could use the following convention to identify a tiles definition:
/tiles/defName
where "defName" is the name of the tiles definition (from tiles.xml) that you want to use. The code for the tilesDispatch.jsp would be as follows:
<%@ page contentType="text/html;charset=UTF-8" language="java" %>
<%@ taglib prefix="t" uri="http://jakarta.apache.org/struts/tags-tiles" %>
<%
String tilePath = request.getRequestURI();
int slashIndex = tilePath.lastIndexOf('/');
if (slashIndex >= 0) {
tilePath = tilePath.substring(slashIndex+1);
%>
<t:insert definition="<%=tilePath%>" flush="false"/>
The scriptlet code takes the request URL (e.g. /tiles/defName), strips off everything up to and including the final slash (e.g. defName), then the tiles "t:insert" tag is used to look up and insert the corresponding tiles definition.
In order to map all URLs of the form /tiles/* to the tilesDispatch.jsp, you would need to add the following to your web.xml:
<servlet>
<servlet-name>tilesDispatch</servlet-name>
<jsp-file>tilesDispatch.jsp</jsp-file>
</servlet>
<servlet-mapping>
<servlet-name>tilesDispatch</servlet-name>
<url-pattern>/tiles/*</url-pattern>
</servlet-mapping>
Note: You may need to insert a slash before tilesDispatch.jsp in the <jsp-file> element. I am using pre-compiled JSPs, so my configuration is a little different. So if <jsp-file>tilesDispatch.jsp</jsp-file> doesn't work, try <jsp-file>/tilesDispatch.jsp</jsp-file>.
Once you have this set up, you can refer to tiles definitions using the /tiles/defName convention in your faces-config.xml. For example, if you have two tiles definitions in your tiles.xml file: tile1 and tile2, you could have something like the following in faces-config.xml:
<navigation-rule>
<from-view-id>/tiles/tile1</from-view-id>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/tiles/tile2</to-view-id>
</navigation-case>
</navigation-rule>
Note that when I have used this convention, I also have used the prefix mapping for JSF. That is, when linking to a JSF page, based on a tiles definition, from a non-JSF page, the URL would be as follows:
/faces/tiles/defName
In this case, the Faces servlet is initially invoked, which sets up the JSF environment. Then the /faces prefix is stripped off, and the remaining URL (/tiles/defName) is routed to the tilesDispatch.jsp, which strips off the /tiles/ prefix, and inserts the "defName" definition.
We are currently using this approach in a number of web apps, and it is working very reliably. I hope this helps.

Hi gimbal2,
I hope to better explain.
In my JSF code I have the next:
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:rich="http://richfaces.org/rich"
xmlns:a4j="http://richfaces.org/a4j"
xmlns:fn="http://java.sun.com/jsp/jstl/functions">
     <h:body>
          <ui:composition template="/template.xhtml">
               <ui:define name="page">
                    <h:head>
                         <h:outputStylesheet ...
                    </h:head>
                    <h:form id="form1">
                         <rich:dataTable      id="table"
                                        value="#{listBeanRequest.elements}"
                                        var="element">
     </h:body>
</html>
In the listBeanRequest class, the method getElements() has a line, Integer h = Integer.valueOf("a");, which efforts the java.lang.NumberFormatException
An in my web.xml I have:
<filter>
     <filter-name>SecurityFilter</filter-name>
     <filter-class>my.filter.SecurityFilter</filter-class>
</filter>
I'm using JSF 1.2 running on Apache Tomcat 6

I have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a white it says share successful but i cannot find where the movie has been saved???need help

i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios

EExactly what settings are you using. Some go to iTunes.

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Is there an issue going on with the iPhones? And iPads? I cannot send text pics. I can't get on Facebook, and I can't get on anything that uses Facebook ex Slotomania. This has been going on for a few days!!! It is happening with and without upgrades.

Contact facebook to address the facebook issues.

Before I formatted my computer, I had a box that said translation, but now after formatting has disappeared. How do I get back it? m.v.h. Tore

Before I formatted my computer, I had a box that said
translation, but now after formatting has disappeared. How do I get back
it?
m.v.h.
Tore
== This happened ==
Every time Firefox opened

See http://www.google.com/support/toolbar/bin/answer.py?answer=20871 - Translate : Translate basics - Toolbar Help

TS1702 I just had to restore my iPhone. After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback. They are stuck on "Waiting" and I cannot open or delete them. HELP, please!!!

I just had to restore my iPhone. After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback. They are stuck on "Waiting" and I cannot open or delete them. HELP, please!!!

I just had to restore my iPhone. After everything has been backed up from the iCloud, 4 of my apps (Facebook, Twitter, Pinterest and Instagram) will not comeback. They are stuck on "Waiting" and I cannot open or delete them. HELP, please!!!

I downloaded the OS X on my air and I can't use my keyboard and it won't let me restart my computer because it says that the application assistant canceled the shut down, I don't know what to do

I downloaded the OS X on my air and I can't use my keyboard and it won't let me restart my computer because it says that the application assistant canceled the shut down, I don't know what to do

When all else fails (it sounds like it has) hold the power button for about 10 seconds. This shuts down the computer. Then tap it to restart. Since it sounds like the OS upgrade began but then failed to perform a restart you may find that the Install Mavericks file is still in the Applications folder and you can try again. Or you might find that you have to redownload. I don't think the installation is going to proceed as if the computer had successfully restarted but I could be wrong (and in this case gladly so for your sake.)

Here's a fix for "This item cannot be updated because it has been changed by another user or process"

https://gallery.technet.microsoft.com/System-Center-Service-fca7af29
A few months ago on the Technet Gallery, I submitted this custom control to be used on SCSM console forms. The purpose of the control is to eliminate the "This item cannot be updated because it has been changed by another user or process" error
message that we all have seen at least once (a day :) ).
The details are in the gallery description (along with installation instructions for existing forms and your own custom forms).
Here's a "short" description (nothing I ever post here is short :) ): This is a custom control that can be applied to an SCSM form like the Service Request form or Windows Computer form or your own custom form built with the authoring tool or Visual
Studio. When you click "OK" or "Apply" on the form, this control scans the form and Service Manager's database for any changes to the object you have open. If a property that _you_ have changed on the form was _also_ changed in the CMDB
(by a workflow or another user), this control will present a dialog box letting you know what happened. It will also let you choose which value to keep (yours, theirs, or the original value).
Just as importantly (and important in a greater percentage of cases), if a workflow changes a "background" property (like FirstAssignedDate) while you have the form open and you click OK, the control will detect the change and allow the form submission
to go through while keeping your changes and the FirstAssignedDate change that the workflow made. You won't get an error message or even a warning. And most importantly, you won't lose your changes.
That's where the "optimistic" part of the control's name comes from. It applies optimistic concurrency control to SCSM forms, while also providing an anti-collision interface for you to use so you no longer lose any of your changes.
Furthermore, this control will work on related items that are opened in memory; for example, the activities on a Service Request. So if you change an activity's title while the workflow engine sets it in progress, you won't get an error. The activity will
be in progress and will get your new title when you click OK or Apply.
Lastly, (and I admit this part is getting into the deep inner workings of console forms) if your form loads a sub projection at run time (to the root object) this control will detect the load and treat that sub projection as if it were apart of the original
form all along.
I've gotten a little feedback about this control, but I'd like to get more since it's a work in progress. So, I'm announcing it here on the forums. Please give it a try and let me know if you have any questions. I'll be happy to answer them here. Thanks,
folks!
Oh, and to answer the most common question right away: It's free. There is no paid version or anything like that. This is something I built for the SCSM community.

Great job!
Will definitely try it out.
Best regards,
Marcus

How can I check how many times or when an app has been re-downloaded on my iphone

How can I check how many times or when an app has been re-downloaded on my iphone. I know how to check purchases but I am looking for how to check when an app had been re-downloaded on my device whether it's through my device or Apple ID

You mention "lack of control" several times. The control is there - you control the Apple ID and password that owns the app. No other Apple ID can use the app. You have not shared your Apple ID or password with anyone, so you and only you own the app.
Therefore, the number of times the app is downloaded or re-downloaded is completely irrelevant. You might, for example, decide to purchase a new iPhone or iPad and download the app there. Or the app developer may issue a new version which you download. None of this matters regarding your "control" of the app. All that matters is that you own it and nobody else can use it.

Set Cursor.vi fails after it has been called for 30 different panel refs in LV 7.1.1

Make sure both attached files (Run LabVIEW_Cursor_TestCase.vi, SimpleVI.vi) are in the same folder. Run LabVIEW_Cursor_TestCase.vi notice that the -3 error code is returned from "Set Cursor.vi" after it has been called with 30 different panel refs. If "Set Cursor.vi" is replaced with "Set Busy.vi" the same error occurs.Is there a workaround for this problem other that setting the cursor image manually in user32.dll? I must be able to open more than 30 panels and set them all to busy. In the test case I used a single VI, simply to demonstrate the error.
Message Edited by Jerred on 05-04-2007 10:06 AM
Attachments:
LabVIEW_Cursor_TestCase.vi ‏68 KB
SimpleVI.vi ‏13 KB

This bug is fixed in LabVIEW 8.0 and later. Unfortunately, I know of no workaround in LabVIEW 7.x. When I encountered this bug in one of my UIs in LabVIEW 7.x, my "fix" was simply to ignore the error outputs from the cursor VIs, and to live with the fact that I had no custom cursors after 30 windows had been opened.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Check that GI cannot be cancelled after GR has been done.

Similar Messages

Maybe you are looking for