Check the account settings for the outgoing server "(null)"?

I try to send emails to myself with the attachment of a picture so I can view it on my computer without having to plug it in, because it is synced with another computer. However every time I have tried to send a photo it is unable to send, and it says 'Check the account settings for the outgoing server "(null)"'
Can anybody help and tell me what this means?
Thanks

That means you have an error in the setting for the outgoing server.
You need to correct that error.

Similar Messages

Can't setup Gmail account - "Mail couldn't discover the account settings for the Mail server "

Since upgrading to Yosemite I can't add one of my gmail accounts.
It's my business domain which is hosted with GMAIL. It worked before the upgrade. Now adding the email address in 'internet accounts setup' I get the message "Can't setup Gmail account - "Mail couldn't discover the account settings for the Mail server "
Mail will not let me setup an email account directly in mail either.
There seems to be major problems with mail in this update.
Also SMTP keeps failing.
Yosemite is a disaster.

Try this. I saw this solution elsewhere on the boards here.
When setting up a business gmail account, something other than @gmail.com, when you try to add the account in Mail preferences, don't select Google as the account type. Choose, "Other." Fill out the name, email and password as usual. Worked great for me after having similar issues trying to get my business gmail account to work in Yosemite.

Problem: Mail couldn't discover the account settings for the Mail server "Unknown"

I have a problem setting up my internet accounts on the System Preferences.
This message always comes up,
Mail couldn't discover the account settings for the Mail server “Unknown”.
Thanks

In Mail's Add Account dialog, enter the account information, then hold down the option key and click Continue. Finish setting up the account manually.

I redid the account settings for the outgoing SMTP server like you told me, still doesn't work -w hat is the PORT #?

all of a sudden I can't send e-mails. Tried turning computer on and off - nothing. I went into account settings and noticed the port # was 25 and next to it it says default is 465 so I changed the port # to 465 - didn't help. I have no authentication already. IS there something else I should change? nothing looks out of the ordinary to me - I am completely lost - if you can help me I greatly appreciate it!!!

It looks like you have the SMTP set to use no password instead of normal password like your POP server.
ISP help desks are worthless as you have discovered.
There is no phone support for Thunderbird. Your ISP is doing you a disservice by giving you any number for Thunderbird. There are some people out there using the name and charging you for help. Be warned.

Which are the crucial files for the account settings for mozilla thunderbird?

Hello everyone,
I am syncing my configuration files between multiple pc's via git - now I'd like to finally inherit thunderbird in this, but I can't figure out the bare needed files for the setup of the accounts.
Means: I don't need passwords, mail, attachments, etc. pp. ... - I only need the account settings (name, imap/smtp-server, port-settings, ...), so I don't have to set up nine mail-accounts on every pc and on every reinstall.
Up until now I couldn't find a definite answer (besides 'copy the whole folder', which is no option since it goes through my git-server which has a yearly traffic-limit) I'm asking here.
Thanks in advance
Ps:
An option would be to sync only the files directly in the folder without subfolders, but that wouldn't be clean.

prefs.js

Where can I change the font settings for the name of the month in iPhoto's calendar project?

where can I change the font settings for the name of the month in iPhoto's calendar project? I just ordered two copies of a calendar I designed in iPhoto and was surprised to find that the calendar's months were printing in something like an Arial 10 pt font. On previous calendars I've printer via iPhoto and Apple, the font was much larger. I've tried every menu option in iPhoto and the Calendar Project program and can't find where this is modifyable. Which leads me to ask, what the heck happened here in the first place? I did not consciously change the default.
I do remember that I got some notice when I first tried to print the calendar about the default font having been changed, but I don't know how this could have happened, and I didn't know what impact that had on the calendar until it was delivered. I typically print about a dozen annual calendars but won't buy another until I've got a handle on this problem. For the most part, the rest of the calendar is okay.
As a P.S. is there anywhere where one can get a power user's manual, or instruction on iPhoto?
Message was edited by: KPAausFrankfort

"Maximum" and "12" usually refer to compression (influencing image quality and jpeg file size in bytes); and as Curt wrote, dpi is meaningless for display by and viewing in web browsers. (It could be a different matter if you are uploading the jpeg files for someone to download from the web to print.)
What are the sequence of steps that you and your batch processing take from Bridge?
You can use call Photoshop's Image Processor from Bridge to create the jpeg files (Tools > Photoshop > Image Processor). In the Image Processor you can set jpeg compression, pixel dimensions if desired, also convert to sRGB (good idea for web display). In my experience the image processor leaves unchanged whatever dpi is set in the source file; or, if none there as might be for a pdf, it will set the dpi value in your New Document Preset Print Resolution (from your Photoshop Units & Rulers preferences).

[svn:fx-trunk] 7801: Submit on behalf of Pete - an update to the project settings for the flex4test project , the link type was wrong.

Revision: 7801
Author:   [email protected]
Date:     2009-06-12 14:38:25 -0700 (Fri, 12 Jun 2009)
Log Message:
Submit on behalf of Pete - an update to the project settings for the flex4test project, the link type was wrong.
Doc Notes: None
Bugs: None
Reviewer: none
tests: compile & run
Modified Paths:
    flex/sdk/trunk/development/eclipse/flex/flex4test/.actionScriptProperties

Wait a second...there is more to that error message that I overlooked before.
There might be something other than just the way I set the CODE and CODEBASE parameters wrong here
Any ideas?
Here is the entire messsage:
load: class DisplayMonoApplet.class not found.
java.lang.ClassNotFoundException: DisplayMonoApplet.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed.
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more

Is it possible to change the default settings for the slideshow?

The default settings for any new slideshow use the dreaded Ken Burns effect and some awful background music from a standard library. Having to turn these things off for every new slideshow I start is driving me nuts. Perhaps preferring no music accompaniment and a static photo on the screen is for some people rather boring - but I would prefer it, at least as a starting point. If anyone can help, I'd be very grateful. Thanks
MacBook Pro Mac OS X (10.4.8) iPhoto 6

Choose "Export" and then the QuickTime option.
It will make a 4 track video with a simple "fade" effect between photos. You can set the dimensions and the duration of your photos. You can also remove the music or add your own from your iTunes Library (no purchased music if you intend to share these movies).

What are the correct settings for the Canon 5D mark II in FCP 7 ?

I am shooting full HD at 23s97 fps.. tried making a preset for the Canon but when I import fils FCP always wants to change to appropriate settings for this file type but doesn't tell me what that is...
(latest firmware installed)
Please, can someone provide all the correct settings for me?
And also, why doesn't the camera show up on the desktop/in the menus when attached to the mac? I have ro use EOS utility every time I want to get anything off of the camera... and FCP doesn't see it either. That's just not right - FCP MUST recognise my camera!! : (
Please help - I don't want to start editing until I have the right settings for this footage.
Thanks
Jim

Welcome to the Boards
Not sure what you mean with the following, looks like a word dropped?
I have ro use EOS utility every time I want to get anything off of the camera...
Anyway, some more specs on your system could help point where the issue is. With the new Plug-In by Canon you can Log & Transfer from the Flash Card (not sure how you connected the camera.) Alternatively you could just drag the files in (but make sure to keep all files such as THM in case you use Log and Transfer later.)
Generally it is best to transcode to Pro Res to be able to work with the files in Final Cut. (Log & Transfer should do that, or using Compressor/Mpeg Streamclip.)
It (Final Cut) is probably changing the timeline to match the codec, or depending on your last preset used, just switching things around. In other words if you were editing in DV and had a set up for that, new sequences would default to that and if you try to ad anything else you will get the message.
Take a look at the search over there -> to look for the Canon 5D threads for some more info.
What I would do is just pull one of the clips in to start and look at what the sequence settings are aftr Final Cut changes them for you - they should be fine generally, though you will want to change Codecs to Pro Res.
I like just batch conversion of all my clips from the 5D Markk II and then work from there. (I do not hook up the camera to the computer, just use a card reader.)

How to disable the user settings for the transparent container

Hi Experts,
I have an form designed using VC - model, which as a input field and button. When i compile and deploy every thing works fine. I get the form as the output.I am able to call this form in the portal and I am able to get the page.
Issue: When i right click on the fields in the form I get "User settings for the input field AA" and gives me an option to Hide the field. Which the users doesnot want.
I tried it on the VC runtime where i don't get the right click option.
So kindly help me out in resolving this issue.
Thanks
Ketan

Hi Ketan,
If you have chosen the Rendering Client as WebDynpro HTML(by default it is set so) for the callable object, then you would invariably get the 'probelm' you're facing.
Instead you could set for the Object Definition -> Rendering Client as WebDnpro Flex in the Callable object (in Guided Procedures). Now you would not get that hide option.
But one simple question, why would the user want to right click on the field? Even if he hides the fields, he always has the option to make them visible again
Let me know if it's helpful
Regards,
Vani

Were are the default settings for the screen resolution

?

The default resolution for any LCD display is usually it's maximum, which is the resolution at which the display is sharpest (for lower resolutions, an LCD display as to interpolate which results in a slightly fuzzy display). The maximum resolution for the built-in LCD for all models of MacBook (not the MacBook Pro) is 1280 by 800.

We are an inner city youth organization, we purchased 30 emac computers for the kids.we can not get the old password off the accounts page for the internet

We can't get on to the internet, all the account numbers are correct and it says we are connected, but the last step it wants to get the old password in order for us to open on to the internet. How do we find and remove the old password.
We can't find the password or get it from the school we received the computer from.

Go to System Preferences
Click Network
Highlight AirPort and click Configure...
Choose “By default, join: Preferred networks”
Select your access point and Remove your access point with the minus button.
Launch your keychain access in Utilities and delete your access point keychain entry.
Reboot
Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.
Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed. Before I went through network diagnostics and all of that stuff in system preferences, and then I tried the "Join Other Network" method, and now it works like a dream.

How can I edit the default settings for the Email button?

I saw this question posted for February and as yet still unanswered. So I am now asking it again.
I do not want to use my .mac account email address in my website. I want it linked to my domain. I have found no specific instructions for changing the default. Also my drag down "Link to" menu in the Inspector does not work.
Thanks........
eMac Mac OS X (10.3.9)
eMac Mac OS X (10.3.9)

While you can't edit the default email address in iWeb, there is a workaround which may suit.
In Safari, locate a web page which has iWeb's email button on it (if you've already published a site, one of your own web pages is ideal). Control-click on the button and select 'Add Image to iPhoto Library'. Drag this image from the Media Browser to your iWeb page, select the image, and use the Link inspector to enable it as a hyperlink linking to 'An Email Message'. Enter whatever email address you like in the To box and a Subject for the message if you wish.
To make things easier, create an iWeb library in iPhoto and add the email button to it for handy access.
[ Visit here for iWeb Tips, Tricks and Hacks ]

How to treat the accounting entries for the Process industry?

Hi SAP Gurus,
I am working with the Process industry client. Here one raw material goes with chain of process. In one plant half of the process will carried out and the rest of the half process would be carried in another plant. the entire accounting entry would be as follow.
Plat A
While Purchasing the RAW material the account entries are
Raw material Inventory A a/c     Dr
     To GR/IR a/c                Cr
While issuing material to process order
Consumption a/c      Dr
     To Raw material A inventory   A/c      Cr
While the FG receipt into the stock
FG B inventory      a/c     Dr
     To COGM   a/c      Cr
Stock Transfer from Plant A to Plant B
Goods issue from Plant A
Goods in Transit   a/c        Dr
To FG B inventory      a/c     Cr
Plant B
Goods Receipt at Plant B
FG B inventory a/c      Dr
     To Goods in Transit a/c      Cr
While issuing Goods to process order
Consumption a/c      Dr
     To FG B inventory a/c     Cr
While Final FG receipt
FG C inventory a/c Dr
     To COGM a/c          Cr
In this case mine consumption account gets hitted two times. One at Plant A and another at Plant B. So in my P&L account the consumption will be in two times. In this case how should i treat the accounting entry??
Advance thanks for the help.
Regards,
Deva

Hi Ravi,
I have discussed with my user. The business requirement is they want the plant wise Balancesheet and Financial statement. If i do the stock transfer from one plant to another it is very difficult for me to get the balance sheet. What we are planning is while transfering one plant to another the FG invertory credit agaist Intra transfer account (One P&L account) then in the receiving end the intra transfer a/c debit to FG inventory so that i can get the trial balance.
I will get back to you once i get the solution for this. Let me know if you have some idea on this.
Thank you.
Deva.

How do you add additional resolution options in the display settings for the MacbookPro?

I am using a Dell external monitor with my 2013 MacBook Pro Retina 13 inch. The resolution is 1900x1200 which is not one of the display selections for an external monitor in the Macbook settings. How do I update the display settings to support this monitor?

Function Modules
http://www.erpgenie.com/abap/functions.htm
http://www.sapdevelopment.co.uk/fmodules/fmssap.htm
http://www.erpgenie.com/abap/index.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

Check the account settings for the outgoing server "(null)"?

Similar Messages

Maybe you are looking for