Check the case in our production database and development
at our end development : -
TABLE NAME NUM ROWS BLOCKS AVG ROW LEN CACHE SAMPLE SIZE LAST ANALYZED
CP_BAGS 4,206,402 195,932 323 N 4,206,402 07/08/2007
CP_DAILY_INV_ACTIVITY 5,549,944 95,777 119 N 5,549,944 07/08/2007
at production :-
TABLE NAME NUM ROWS BLOCKS AVG ROW LEN CACHE SAMPLE SIZE LAST ANALYZED
CP_BAGS 4,532,370 104,659 322 N 453,237 08/08/2007
CP_DAILY_INV_ACTIVITY 6,267,560 55,007 119 N 626,756 08/08/2007
we got difference in sample size ..and block's used...
index statistics :-
at our end development :-
INDEX NAME TABLE NAME BLEVEL LEAF BLOCKS DISTINCT KEYS AVG LEAF BLOCKS PER KEY AVG DATA BLOCKS PER KEY CLUSTERING FACTOR NUM ROWS LAST ANALYZED
CP_BAGS_N11 CP_BAGS 2 14,966 260,756 1 6 1,698,685 4,206,402 07/08/2007
at production :-
INDEX NAME TABLE NAME BLEVEL LEAF BLOCKS DISTINCT KEYS AVG LEAF BLOCKS PER KEY AVG DATA BLOCKS PER KEY CLUSTERING FACTOR NUM ROWS LAST ANALYZED
CP_BAGS_N11 CP_BAGS 2 9,878 36,306 1 45 1,662,908 4,620,270 08/08/2007
Similar Messages
-
My Mac notebook does no longer recognise my external keyboard which was connected by a USB cable. I have checked the keyboard on other Mac notebooks and it works fine. Any suggestions?
and in some kind of record, I've read another thread an it's fixed!!
Kids.
Accessability-> zoom-> off
5 days i've been squinting! -
My daughter changed the password to our ipod touch and cannot remember it. What do I do to reset it?
If you cannot remember the passcode, you will need to Restore your device...
Connect to iTunes on the computer you usually Sync with and Restore...
http://support.apple.com/kb/HT1414
If necessary Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808 -
I cannot get my bookmarks and reading lists to sync over my devices. I've checked the iCloud settings on both devices and still nothing. Using a retina iPad and a new mac book pro
Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > store, scroll down and tap your ID) -
I don't know what is going on with the White Balance (WB) and LR. I had no problem before but recently LR started to change the WB as it is importing photos. I checked the color scale for my photos and LR and both are with sRGB. Now instead of LR changing the WB it is giving me a second copy with a new WB. Your advise is very much needed and appreciated. Thank you.
Can you show us a screen capture of this 2nd copy with a new WB in your Lightroom grid? Thanks
Are these second copy photos by any chance photos that had been previously imported? -
I decided to backup for the first time with icloud yesterday, and lost all my phone contacts! I am panicking because the backup is saying 0 and I checked the internet account on my pc,and it's only showing email addresses from my hotmail account. What to do? How to recover them!
Have they also gone from iCloud.com when you log in from a computer.
-
I checked the apple tv on my iPad and iPhone but no mirroring on/off toggle appeard. How do I make this work?
I am trying to get mirroring to workTry:
http://www.macworld.com/article/2099925/how-to-stream-ios-audio-to-multiple-airp lay-destinations.html -
Can some one check the serial number of my charger and lighting cable?
i think my accessory has been replaced by the fake one
can some one check the serial number of my charger and lighting cable?
thank you so muchYou aren't talking to Apple here. This is a user-to-user technical help forum hosted by Apple.
-
One of the computers that had our Itunes account on it crashed. We want to be able to add the account to our new computers and future computers but it shows that we have used 4 of 5 computers. Once we hit 5 are we out of luck or do they revolve? Like putting on number 6 will delete number 1?
Authorise / Deauthorise About
http://support.apple.com/kb/HT1420
shendricks11 wrote:
... Once we hit 5 are we out of luck or do they revolve? Like putting on number 6 will delete number 1?
This is not how it works.
You can only have a maximum of 5 computers Authorised at any one time.
If you no longer have, or access to, the computer(s) you want to deauthorise,
Log in to iTunes, go to "view your account info" on the itunes store, deauthorise all five,
(Please Note: this can only be done Once every 12 months)
Then re-authorize your current Computer(s) one at a time. -
About ODMr for product design and development.
how ODMr can be used to find patterns of desingers' behaviors when they create new design for a product?
In general, designers tend to change their design to satisfy needs required by customers or technicians.
Is ODMr able to find which design parameters are most contributive to the performance of a product?
Is it ok to use Decision Tree if I have hypothesis space for desing parameters and training data?
I want to use ODMr to improve R&D process.
But I'm sure it is a smart way to use ODMr for product design and development.
If anyone has good idea or other algorithm available for that field, please let me know~~
Have fun~!I would think if you are going to run both of those programs at the same time, or even one at a time, a system with discrete graphic would be a better fit for you.
The next question is if you are doing web design do you really need a retina display. At this time only apple has them so everyother computer viewing your web designs wouldn't see the difference, if there is any to begin with. -
ANYBODY GIVE ME THE TABLE/TABLES THAT CONTAIN TCODE AND DEVELOPMENT CLASS
ANYBODY GIVE ME THE TABLE/TABLES THAT CONTAIN TCODE AND DEVELOPMENT CLASS
Hi phani,
The table TSTC contains the transaction codes.
Also the below links provides a lot of info on the Standard SAP Tables.
http://www.sapdev.co.uk/tables/tables.htm
Pls reward if useful..
Thanks,
Sirisha. -
Identify the storage of our RAC database
I am new to RAC - We have setup of 11gr2 two node rac - I am doing a sanity check like below what is our storage How does we identify our shared disks defined (local, SAN, iSCSI)?
967023 wrote:
I am new to RAC - We have setup of 11gr2 two node rac - I am doing a sanity check like below what is our storage How does we identify our shared disks defined (local, SAN, iSCSI)?
Local disks could not be used in the case of RAC as the last needs shared.
1. Identify disks used for ASM:
asmcmd lsdsk
2. Disks may be presented through HBA, iSCSI, dNFS.
3. Disks may be presented with a single path. And i.1 will give necessary information.
Or multipath may be used.
4. List disks with:
ls -l /dev/disk/by-id
Path like
lrwxrwxrwx 1 root root 24 Mar 14 02:25 scsi-1ATA_VBOX_HARDDISK_VB3ee53981-f184882e -> ../../oracleasm/OCRVOTE3
will indicate shared VBox disk
ls -l /dev/disk/by-path
Paths like
lrwxrwxrwx 1 root root 9 Feb 16 11:43 ip-xx.xx.xx.xx:7260-iscsi-iqn.2010-06.com.purestorage:flasharray.123456qwerty-lun-1 -> ../../sde
will indicate iSCSI
iscsiadm -m session -P 1
may give additional information in the case of iSCSI
multipath -ll
may give additional information in the case of HBA.
P.S.
Checked against OL5. -
How can we check the data already exists in database
hi friends
i am trying create one procedure to add customers in database with customer id as input parameter..but if in the database customer detail already exists than i would like to update that detail and if its not in the database than i would like to add that detail in the databse...how could i do this ...
any help wpould be appreciate
thanks
rommyHi,
If your requirement is to insert in one table and if the record exists insert into other table the merge statement doesn't work
Example (please check the column name and parameter names). I don't put commit or rollback because I don't know if you control the transaction inside this procedure or outside it.
CREATE OR REPLACE PROCEDURE add_cust(I_CUST_ID IN VARCHAR2,
I_CUST_F_NAME IN VARCHAR2,
I_CUST_L_NAME IN VARCHAR2,
I_CUST_ADD IN VARCHAR2,
I_CUST_CITY IN VARCHAR2,
I_CUST_STATE IN VARCHAR2,
I_CUST_ZIP IN VARCHAR2,
I_CUST_DOB IN DATE,
I_CUST_ IN VARCHAR2,
I_CUST_ACCT_TYPE IN VARCHAR2,
I_START_BAL IN NUMBER) IS
BEGIN
INSERT INTO CUSTOMERS C
(CUST_ID,
CUST_F_NAME,
CUST_L_NAME,
CUST_ADD,
CUST_CITY,
CUST_STATE,
CUST_ZIP,
CUST_DOB,
CUST_)
VALUES
(I_CUST_ID,
I_CUST_F_NAME,
I_CUST_L_NAME,
I_CUST_ADD,
I_CUST_CITY,
I_CUST_STATE,
I_CUST_ZIP,
I_CUST_DOB,
I_CUST_);
EXCEPTION
WHEN DUP_VAL_ON_INDEX THEN
INSERT INTO CUSTOMER_ACCT
(CUST_ID,
CUST_ACCT_NO,
cust_acct_type)
VALUES
(I_CUST_ID,
CUST_ACCT_SEQ.NEXTVAL, -- CUST_ACCT_SEQ is a sequence, isn't?
I_CUST_ACCT_TYPE);
END add_cust;Regards, -
HOW TO CHECK THE CHECKBOX VALUE WITH SQLCE DATABASE
Hai All,
Good Day! I am using VB in Visual Studio 2008. I have a form with check boxes and one button control. If i selected the check box and then click the button, check the database table field and check box text are equal. if both are equal then
how to check?
I have tried it. The code is:
Public Class Form1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
Dim conn As New SqlCeConnection
Dim cmd As New SqlCeCommand
conn.ConnectionString = "DataSource = E:\Vbprojectex\WindowsApplication3\WindowsApplication3\Database1.sdf"
Try
cmd.Connection = conn
conn.Open()
If CheckBox1.CheckState = 1 Then
cmd.CommandText = "SELECT Aerator FROM ttabpagelist where Aerator = CheckBox1.Text"
TextBox1.Text = 1
End If
cmd.ExecuteNonQuery()
Finally
conn.Close()
End Try
End Sub
End Class
Thanks & Regards Sasi ................. Go Greenprobably something like (ofc below will never give result since Aerator can't have 2 values, you will have to adjust the second check box column obviously)
Try
cmd.Connection = conn
conn.Open()
dim strsql as string = "= "SELECT Aerator FROM ttabpagelist "
Dim whereConcatenator As String = " WHERE "
Dim Wherestatement As String = String.Empty
If checkbox1.checked = True Then
Wherestatement += whereConcatenator
Wherestatement += "Aerator = " & checkbox1.Text
whereConcatenator = " AND "
End If
If checkbox2.checked = True Then
Wherestatement += whereConcatenator
Wherestatement += "Aerator = " & checkbox2.Text
End If
cmd.commandtext = strsql & wherestatement
TextBox1.Text = 1
End If
cmd.ExecuteNonQuery()
Finally
conn.Close()
End Try -
Check the policies of Virtual Private Database
Hi all,
I have 10g and 11g databases and would like to check which users in my database has (and which) policies created. Is it correct, that in the views DBA_POLICIES and DBA_POLICY_GROUPS I can find this information?
My second question is: how can I remove (or deactivate) VPD in the database (10g and 11g)?
Thank you!hi,
yes DBA_POLICIES is the view to inspect, grouped policies are rarely used. To remove or disable any VPD policies use
package DBMS_RLS , it has procedures DROP_POLICY and DISABLE_GROUPED_POLICY. Before you disable or drop
such policies please check if you are not violating any business rules since these policies are usually there for
a reason and could be an integral part of applications running on your db, to disable VPD policies for individual
users, you can grant them the privilege EXEMPT ACCESS POLICY also,
greetings,
Harm ten Napel
Maybe you are looking for
-
Set expression's variable in the same step
I probably asking a rhetorical question, but does it exist a way to set an expression's variable (say for load sequence dynamically) in the same step (sequence call)? I have a situation where I need to read a sequence path from the database and then
-
Lost project replaced with new one?
I have a project that was finished with the exception of minor tweaking. It was saved. I was going to go back later and finish. A few days later I started pulling clips for a new project in a completely different project. (and saved them) Now when i
-
Missing Photos from Library with Revel Premium
I use Photoshop Elements 13 and upgraded to Revel Premium recently. My issue is that only part of my library uploaded to Revel. I have the option checked to upload the entire library, and I tried restarting the synchronization agent several times,
-
Hi, Suggest me one good text book for learning RESTful webservices in java from the basic..
-
Second WRT610N as wirelessN range extender?
I link to the internet through a highspeed DSL broadband connection with an ISP-supplied 2wire modem/router. From this modem/router, I have an RJ-45 cable connection to a Linksys WRT610Nv2 Wireless Router, which I have set up as a wireless access p