Check the config

Hi,
I am running this config with 4GB RAM, in Win 7.
http://dl.dropbox.com/u/40211031/t2.png
is this powerful enough to further have a VirtualMachine and then to run Oracle Linux 5.7 inside. I will put 1/2GB ram for the VM. And further I will run R12 inside OL 5.7? Will this be fine?

It depends on what you are trying to accomplish or expect. 4 GB is not a lot to run 2 OS's and Oracle, but for testing, installing or evaluation it might just work.
I used MacOSX an a Macbook Pro and ran VMware with OEL 5.4 and Oracle 11gR2 for the purpose of my OCP training 2 years ago. It ran fine, beside drawing a lot of battery power. However, the system stopped to be useful when starting another virtual machine.
Windows 7 is probably a different story and I would take the advice from the previous response. Since RAM is not so expensive anymore I'd consider upgrading to at least 8 GB. And also use free Oracle Virtualbox.
Other important issue you need to verify before going virtual:
- must have a 64-bit CPU with HVM (vt-x/d) support to have good performance.
- need a 64-bit host OS if you want to assign more then 3.5 GB of RAM to your virtual guest machine.
(your CPU should be ok)

Similar Messages

After transfering the config to QA client.Ex group for No ranges not avail.

Dear All,
We have tranfer the configuration to Quality client,On checking the config in QA clinet under maintain excise group --excise group are available but while creating the no ranges In SNRO we are getting the massage Excise GRP -
Z1 does not Exist.Once again I have created new request for this and transported but still the problem remain the same.Please guide.
Regards,
VR

For maintaining no. ranges for any Excise group which has been configuered & transported, the same excise group has to be maintained in J_1inexcgrp (at the destination client) to enable no. range maintenance for the same at the destination client.
This activity is in addition to regular config.
Hope this will help.
Regards,
Akhileshwar K

First RFC call failed, config not loaded. Check the System landscape configuration.

Dear Experts,
We are getting below error on portal while using the BEX query in BI system.
Error:
BEx Web Application
Error: First RFC call failed, config not loaded. Check the System landscape configuration.
Exception occurred while processing the current request; this exception cannot be handled by the application or framework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience.
As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
Kindly suggest me on this issue..
Thanks,
Bharath.

Hi Bharath,
Please go through the below SAP Note and let me know if this helps.
1903392 - Error: First RFC call failed, config not loaded
BR,
Anurag

Error(12,61): Parse of component type files failed, check the adf-config

I got this error when i wanted to deploy CreditCardValidation
Error(12,61): Parse of component type files failed, check the adf-config.xml file : "java.lang.reflect.InvocationTargetException"

I got this error when i wanted to deploy CreditCardValidation
Error(12,61): Parse of component type files failed, check the adf-config.xml file : "java.lang.reflect.InvocationTargetException"

After updating to 4.0 stable today, FF reports it is in offline mode and can't open pages! I've checked the work offline boolean in about:config, it is set to false as it should be. !?!?

After updating to 4.0 stable today, FF reports it is in offline mode and can't open pages! I've checked the work offline boolean in about:config, it is set to false as it should be. !?!?

What in particular didn't you like about Firefox 6?
You can undo a lot of changes, either via changing settings or prefs on the <b>about:config</b> page or via extensions.
*https://support.mozilla.com/kb/common-questions-after-updating-firefox
Do a clean reinstall of the version that you want to use.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
*Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
* http://kb.mozillazine.org/Profile_folder_-_Firefox
* http://kb.mozillazine.org/Profile_backup

I checked the wrong box on for a website I use frequently and now recieve the message "Access to xpcom is denied. Set "signed.applets.codebase_principal_support=true" in about:config"; how can I change this?

I am tech challenged. I know this is probably a setting that just needs to be changed but I have idea on how or where to go to change it. It appears to be a security setting - I checked the wrong box on a firefox popup regarding access. The site is grammarly.com and when I attempt to paste my copy to be grammar checked it won't allow me to do so, and I get the above quoted message. Please help!

You can check the file prefs.js in the profile folder to see if you find any lines referring to that website and remove those capability.principal.codebase lines.
*http://kb.mozillazine.org/prefs.js_file
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Help > Troubleshooting Information > Profile Directory: Open Containing Folder

When I check the content in a test server I get this: ssl_error_bad_cert_domain and the option to accept, but in a iframe I get the same error but theres not op

I work in an international company and we have a server farm with 54 servers, so I need check content in all of them for 118 countries, I created a little application to do this and the problem is this:
When I check the url in the main window I get: "Error: ssl_error_bad_cert_domain" but there is "add exception" option and the problem ends there. But my application loads the pages within an iframe and when I try to load them the error appears but there is not any option to continue.
Could you tell me please which option of the configuration (about:config) I should change to avoid this, because adding an certificate for every country for every server (6372 certificates) it's not an option for me.
*Note: The error appears because the dns of such servers have several subdomains and the certificate is not valid for the resultant url.

Facebook uses such servers to store additional content media files and maybe CSS and JavaScript files.
Reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

How to check the visibility of a Web Dynpro input field

Hi,
In my application, one input field could be set as invisible by
1, Component Configuration: The 3rd tab "Web Dynpro Built-in" -> Views and There Elements -> Visibility (Check the radio: No)
2, Administrator configuration: While the Web Dynpro is accessed through URL with parameter "sap-config-mode=X", the administrator can configure the visibility of the UI element through right click menu "Settings for Current Configuration".
Could any one tell me how could I know whether the input field is visible or not?
I have tried that in the WDDOMODIFYVIEW method of the view, the method CL_WD_UIELEMENT->get_visible( ) always returns '02' even if the input field is invisible.
Thanks in advance!
Cheers,
David

Hello,
See this: [Component and Application Configuration|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b52e13c3-0901-0010-8fa6-d11a51821b7c].
Regards.

Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

Hi,
Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
I have done some Google and found that we need to add something in Essbase.cfg file like below.
1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
Possible Problems
Analytic Services could not lock enough blocks to perform the calculation.
Possible Solutions
Increase the number of blocks that Analytic Services can allocate for a calculation:
Set the maximum number of blocks that Analytic Services can allocate to at least 500.
If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
Stop and restart Analytic Server.
Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting.
Determine the block size.
Set the data catche size.
Actually in our Server Config file(essbase.cfg) we dont have below data added.
CalcLockBlockHigh 2000
CalcLockBlockDefault 200
CalcLockBlocklow 50
So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work? and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
Regards,
Naveen

Your calculation needs to hold more blocks in memory than your current set up allows.
From the docs (quoting so I don't have to write it, not to be a smarta***:
CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
Example
If the essbase.cfg file contains the following settings:
CALCLOCKBLOCKHIGH 500 CALCLOCKBLOCKDEFAULT 200 CALCLOCKBLOCKLOW 50
then you can use the following SET LOCKBLOCK setting commands in a calculation script:
SET LOCKBLOCK HIGH;
means that Essbase can fix up to 500 data blocks when calculating one block.
Support doc is saying to change your config file so those settings can be made available for any calc script to use.
On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

How to track changes for the config done directly in quality client-Reg

Hi,
In our system the landscape is Dev,Quality,Production.
For some transactions we will do the config in dev and transport to other clients or maintain in each client manually.Eg QS41,CI41.
In my case ,I have did the config in CI41 and transported to other clients.But someone user get in to CI41 in Quality client and did some changes. Now how to track the user Id through which the changes has been performed in QA directly.
Regards
SB

hi
you can use SE09 for displaying the transport no where you can see all the request nos ,from there you can check
also use the same transaction Cl41 do some changes like description ,then press the save button ,system will prompt you the previous saved Request No and make a note of it .cancel the request generation ,then you can trace them in SE09
also check whether you can find any change documents is available
regards
thyagarajan

Duplicate Invoice Check Not Checking the Gross Invoice Amount-

Gurus,
When checking for duplicate invoices in MIRO/FB60, I have made all the config and setup but still the system is not checking the gross Invoice amount field. Lets say I enter
Invoice 1 :
                 Vendor                 X
                  Reference            123
                  Date                    10/27/2010
                  Company Code : 1111
                  Currency           : USD
                  AMOUNT           :100         and post this invoice
I try to enter the second invoice
Invoice 2:
                   Vendor                 X
                  Reference            123
                  Date                    10/27/2010
                  Company Code : 1111
                  Currency           : USD
                  AMOUNT           : 90
I get the error message even though the AMOUNT in the second invoice is 90 which is not the same as first invoice .
I chcked the vendor master duplicate check, made the config in spro-liv for duplicate invoice for company code, reference number and invoice date.
The help says that after 4.6 version if all of them match, then the system wiill throw error, but in my case the amount is not matching and its still giving me an error.
Kindly help..<< Moderator message - Please do not offer points >>
<< Moderator message - Everyone's problem is important >>
Edited by: Rob Burbank on Oct 27, 2010 4:07 PM

Hi,
After making the duplcate invoices chek at spro will checks the reference number of the invoice entered previouslu with that one entered later for that company code.as the first check itself failed system throws the error thinking, you are trying to enter a duplicate invoice for a already posted invoice though how much is the amount in the second invoice .
It will allow to enter the item details , if the dupplicate invoice check is properly configured for that company code and ref number .Did you get the error mesage after entering the details?If you get a error a message which stops furthur entry them your conf is correct, if not you may need to check back .
Check the invoice toletrances at spro too amount.
the below link explains you the process of dupliation in LIV.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ce/4f3e39ea3aee02e10000000a114084/frameset.htm
Regards,

An unexpected error occurred processing your request. Check the logs for details and correct the problem.

Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
Rakesh

Hi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

ACS will not save the config changes to reports

I have configured a very old ACS appliance, 4.1. At this time this is what I we have to use. The authentication is working fine, the reports for accounting, TACACS+ accounting is only saving the login and logout of the users and not any config changes that are being made.
I'm hoping that someone may have an idea of what accounting command I am using or if this older version has some changes that need to be done as the config/aaa lines I use today and work on newer version work. I was under the impression that this line "aaa accounting exec default start-stop group tacacs+" would send every command to the tacacs server?
aaa new-model
aaa authentication login default group tacacs+
aaa authorization config-commands
aaa authorization exec default group tacacs+ none
aaa authorization commands 0 default group tacacs+ none
aaa authorization commands 1 default group tacacs+ none
aaa authorization commands 2 default group tacacs+ none
aaa authorization commands 7 default group tacacs+ none
aaa authorization commands 15 default group tacacs+ none
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
any ideas would be3 appreciated. thanks for reading
Yvon

Hi martijn,
Are there some custom fields in this list or some duplicate columns? Please have a check.
For more information about the possible reasons and solutions, see
http://social.technet.microsoft.com/Forums/en-US/sharepointcustomizationprevious/thread/ae946f73-3126-41ad-833b-25e4cc2b7723#e22af3fe-8203-45c4-8d19-e18041a048e2
http://social.technet.microsoft.com/Forums/en-US/sharepointgenerallegacy/thread/59895a6b-7f61-431f-a762-e3fd9d81fe34
http://social.technet.microsoft.com/Forums/en/sharepointcustomizationprevious/thread/eba4cd7e-498a-465f-adea-decae44d7a8c
Regards,
Kelly Chen

How to check the host name or rename the host name in Enterprise Manager

Hello,
How do i check the host name or rename the host name in Enterprise Manager for Oracle 11g?
Regards,
Ming Man

there is a shell script called chgip or something
like that is there . I used it for IAS. I beleive the
same is there for database too
Rajesh AlexIf there is, I have not been able to find it.
Off the top of my head, changing the host name involves at least the following (others feel free to add on):
For listener and connectivity
- listener.ora
- tnsnames.ora (on all clients as well)
- potentially ldap.ora (on all clients as well)
- init.ora parameter LOCAL_LISTENER
For admin using Enterprise Manager (starting 10g)
- the contents of the sysman schema
- the directory name of the OEM agent directory
- the directory name of the OEM OC4J config directory
- various config files in the OEM OC4J config directory
Oracle provides the emca to handle this last set.
In addition, the following refer to hosts that are [probably] not local
- init parameter REMOTE_LISTENER (usually just points to a tnsnames.ora entry naming remote hosts)
- init parm SMTP_OUT_SERVER
Again, adding to the list might be interesting.

Check the config

Similar Messages

Maybe you are looking for