Check the connect to DB & SAP

Hello Guys,
Like R3trans -d for Oracle & SAP.. I wanted to know how to check the connection test for DB2 & sap , Is there any such commend Please let me Know,
Thanks,

Hi,
if u want to connect from R3 to any other SAp system like XI/PI,MDM,etc...
u can create a RFC destination in R3 (SM59) and give d IP and credentials in the columns specified.
After that click on Test connection tab which shows the details of connection like time required.
You can even click on Remote Logon to directly log in to the destination system...
Thus u can check d connection
Reward points if helpful
Menon

Similar Messages

When i go to install creavtive cloud it says check the connection, try again but however my connection is fine and i've tried my friends connection and the same thing keeps happening HELP!!!

when i go to install creavtive cloud it says check the connection, try again but however my connection is fine and i've tried my friends connection and the same thing keeps happening HELP!!!

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Checking the connection Status

Is anyone using the cocoaDev NetSocket? I try difficulty in checking the connection status using NetSocket...i open the socket and the connection, but when i'm perfmorming some action that waits for a server response, there's no automatic timeout that control if the connection is up or down after many seconds waited by the same action...

We are using Outlook 2010
I have removed the entry in the LAB using ADSIEdit following this procedure:
http://exchangeserverpro.com/remove-default-public-folder-database-exchange-mailbox-database/
This has resolved the issue there. Why are you opposed to me running this in Production?
Thanks
shapi
I wanted to verify that you weren't using any org forms first!
Since you are using Outlook2010, why not remove the PF distribution on that 2007 OAB as well?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

I have an Epson NX420 printer/scanner, and I keep getting a message on the scanner, saying that there is a communication error, check the connection. I am not having any luck scanning my pictures into the computer.

I have an Epson Nx 420/printer/scanner, and I keep getting a message that says there is a communication error. Check the connection [W-61}. I have the snow leopard operating system Mac OS X 10.6.8 I want to scan my pictures into iphoto. Can someone please tell me what I am doing wrong. Thankyou.

Make sure you have updated all of your scanner drivers. Check Software update and check with Epson tech support.
Not sure if the Gutenprint and Gimp-Print for Mac OS X (10.2 and later) drivers deal with scanners. Read the info on their website.
Check Apple's Knowledge Base for Snow Leopard & Lion Printer solutions and suggestions for scanner troubleshooting. Especially if you have an all in one.

Tests the connection to an SAP ITS server

Hi friends,
When iam trying to test the connections in portal the following errors are seen.Please help me to solve the problem if it is in the abap stack or java stack
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the server to see if it is alive.
7. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000)
5. The host name evoxssqab.comm.nonprod.evo.internal.vodafone.in was resolved successfully.
6. The server evoxssqab.comm.nonprod.evo.internal.vodafone.in was pinged successfully.
7. The Web AS ping service http://evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
8. An HTTP/S connection to http://evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000/sap/bc/bsp/sap was not obtained successfully; this might be due to a closed port on the Firewall.
ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Pings the server to see if it is alive.
8. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000)
6. The host name evoxssqab.comm.nonprod.evo.internal.vodafone.in was resolved successfully.
7. The server evoxssqab.comm.nonprod.evo.internal.vodafone.in was pinged successfully.
8. An HTTP/S connection to http://evoxssqab.comm.nonprod.evo.internal.vodafone.in:8000/sap/bc/gui/sap/its was not obtained successfully; this might be due to a closed port on the Firewall.
thanks

Hi Murthy,
From the Result message which you gave, it seems that you are using the incorrect Hostname/Host path.
Try giving portal server name, generally the system name would be the portal server name.
The port which you are using is 8000, try 80 instead.
Please find the below URL for more details about these parameters.
http://help.sap.com/saphelp_nw70/helpdata/EN/45/2f86691ca96d7be10000000a114a6b/frameset.htm
Thanks,
Ansar

How to check the OSS note in SAP Client system ?

Hi all
I just have a small question ... how do we check whether an OSS note is applied in the SAP client System or not ?
Please let me know..
Thanks
Mallikarjun

Hi
1) One way is checking the version and support pack applied.I.e,
On the main SAP screen > Systems > Status > Check details of the "Component version".
2) STMS > Double click on the system you need to check > Check the status of your request.
Nadini

How to check the Idocs sent from SAP system

How to check the outbound Idocs sent from SAP system to target systems.
How to know the message types and target systems.

Hi,
In Addition with the above mentioned transaction code(WE02), u can check out idocs in these table - EDIDC, EDID4, EDIDS. Depending on different status you can differentiate them as Inbound or Outbound Idocs...
Cheers...
Santosh.
Mark All Usefull Answers...

Need to know how to check the outbound queue in SAP for data flow into CRM

Hi Specialist's,
I have changed an entry in Customer Master Data in Sap r/3 and this change has come fine to CRM system.I checked the inbound BDOC in CRM ( Trn:SMW01) and it has come fine into CRM system.I am also able to see the affected field in CRM with new value.
I need to know how to check this from SAP side i.e. I have checked the outbound IDOC list (WE02) but could not find the record.
Is there any other way in SAP that i can check?
Also please let me know if there is any other way except IDOC in SAP to send data from R/3 to CRM?
Usefull answers will definitely be rewarded with points .
Thanks,
Abhinav.

Hi Abhinav,
There are no IDOCs generated in R/3 for replication. R/3 system calls BAPI and Function modules remotely on CRM system which are part of the Adaptors provided for middleware.
Try to deregister the outbound queues in R/3 (Transaction SMQS) and see if you get an entry in the Outbound Queue (Transaction SMQ1). I have not tried this.
If you don't get any entry in the outbound queue then definitely there would be some FM at R/3 end which would be calling CRM system remotely.
Reward points if it helps.
Regards,
Amit Mishra

How to check the ALE settings in SAP

Hello everybody,
I have a question about ALE setups.
Through ALE,a lot of data flows from one SAP system to another.Hence all these various SAP systems are maintained as logical systems and the appropriate RFC destinations are in place.
1.Now,if I wish to disable some of these recipient SAP systems ,how to go about it?
2.More importantly, I have a list SAP boxes(you can say,recipient logical systems),for which I need to check if they are still active or if they have already been disabled.
Basically,my problem is that I have a number of SAP programs which have got variants maintained ,containing these SAP boxes as partner recipient numbers as part of their variant data.Now,these variants are used to run a lot of batch jobs and I need to verify whether these mentioned partner recipient numbers are still up and active or they have been disabled while the variants never got rectified.
Please let me know as how this complete check can be made.
If any clarification regarding the problem is required,please do not hesitate to ask.
Regards
Papri

Hello Papri,
See below a fast overview for Application Link Enabling settings to check:
1- Are logical systems with which you want to exchange data defined ?
If not, you cannot have a RFC connection to those systems.
2- Do you have RFC R/3 connections for your logical systems (SM59) ?
If not, no transactional RFC port can be created for those RFC connections.
3- Do you have a transactional RFC port for your RFC connections (WE21) ?
If not, no parner profile can be generated for your parner type (Logical System).
4- Do you have a distribution model between systems (BD64) ?
If not, no data exchange via IDoc is possible as no partner profiles LS (WE20) are generated and no model view is distributed.
So, according to your point:
1- only one logical system can be reached by RFC connection. It is not possible for others,
2- that's why you have partner profile not being active,
3- so, RFC connection is no longer active for logical system is this situation.
Just one thing regarding those sentences from your first post:
>(...)
> Basically,my problem is that I have a number of SAP programs which have got variants maintained ,containing these SAP boxes as partner recipient numbers as part of their variant data.
>Now,these variants are used to run a lot of batch jobs and I need to verify whether these mentioned partner recipient numbers are still up and active or they have been disabled while the variants never got rectified.
> (...)
As those partners (logical systems) are not defined, you should have a DUMP for those jobs.
It is not the case ?
Regards.
Laurent.

Trying to sign in to iMessage with Apple ID and keep getting a message to check the connection. Connection is fine

Can't connect to iMessage. Have a good connection and the correct password. Amy ideas?

Hello JRICHJ
Check out the articles below for troubleshooting issues with messages.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Thanks for using Apple Support Communities.
Regards,
-Norm G.

It won't finish down loading an Itunes extra I paid for. Error 12001 keeps showing up and I checked the connection and it's fine. What do I need to try next

Purchased the movie Lincoln from Itunes. The movie came through but the Itunes extra stopped downloading. error message 12001 shows up again and again even after checking theconnection which is fine. Any suggestions so it will finish the download?

Even though you're getting a different error message number, try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

Can't restore my third gen ipod nano. Says it can't connect to the internet to restore yet I have no problem connecting to itunes. Have check the connection, emptied the cache don't know what esle to do

Have tried to restore my 3rd gen ipod nano. Originally config to an apple maching now have windows. Press the restore button and get dialogue box that it can't connect to internet. Internet is strong connection through home wireless. Easily connects to itune store. Have cleared cache. Don't know what esle to try- any ideas?

Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

I have an iMac with OS X 10.5.8 and Time Machine no longer finds the backup device. It had initially worked. I have checked the connections and restarted the backup device but cannot make it work. What actions should I take to correct this?

Time Machine no longer finds the backup device

Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imagine something not being covered there.

How to check the database connection using OCI

I am working on enhhancement of very old application developed using C and OCI. It has a background process which acts as a middleware for interaction of any other front end process with oracle database. Any processes, which needs to interact with database sends a request to background peocess and then it will execute a call to execute the stored procedures for performing requested operation (like select, update, insert) on table and will send the result back to respective process. So this process has to be always running in background and connected to branch database.
If branch database gets restarted or connection gets dropped due to some ad-hoc problem then the background process also has to be restarted manually. Because this process establishes the connection to branch database only once on start up and it does not have the intelligence to reconnect automatically in such scenario.
I am looking forward to build the intelligence in this process to automatically reconnect if connection with branch database is lost. But I am not familer with OCI, and I am not sure if there is any OCI call which can determine if my earlier connection is still available. Can any one please tell me if there is any other way to check the connection other than the execution of dummy query, then check if it gets executed properly and then do the actual query.
Thanks in advance,
Deeapk

Hi,
If you are reworking the application can you not build in the functionality to re-establish a connection if there is a failure? That is, a submission from the application server to the database server detects a failure, etc. and then re-establishes the connection. If you need a more frequent check than during a user-initiated roundtrip, you may be best served by using the "dummy query" technique on some time interval.
From my understanding using HA Event Notification would require a RAC database (plus a multi-threaded application and services correctly configured on the RAC-side).
In the documentation I see this:
http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14250/oci09adv.htm#sthref1495
"Applications must connect to a RAC instance to enable HA event notification."
In any case, this has the potential to be a bit complicated...
Regards,
Mark

Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration: Agentry Error

Hello Experts,
I follow the flightbooking tutorial to create a Material application to get material list. I can start the agentry server but when I connect to SAP server and get data, I face below issue
Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER
I check the parameters name in SAP Agentry Config panel, all are correct. Why cannt it get the data. Do I have to add anything in javaBE.ini? Please help me. Thank you very much.
My javaBE
[HOST]
server=be1.vdc.csc.com
APPNAME=ZCH_MATERIALLIST
[CLIENT_NUM]
CLIENT=800
[SYSTEM_NUM]
SYSNUM=01
[LOGON_METHOD]
; USER_AUTH if standard UID/Password authentication is used
; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
; (load balancing) is used
LOGON_METHOD=USER_AUTH
[GLOBAL_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
; uses a pool of connections to the SAP backend all utilizing a single
; UID/password
UID=
UPASSWORD=
SHAREDCONNECTION=0
GET_PERSONNEL_INFO=
[SERVICE_LOGON]
ENABLED=true
UID=hngu3
UPASSWORD=xxxxxxx
UPASSWORDENCODED=false
[GROUP_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GROUP
; individual user authentication using an SAP Message Server which distributes
; client connections among a "group" of SAP application servers based on load
; balancing criteria
; host name or IP address of SAP Message Server
MESSAGE_SERVER=
GROUP_NAME=
SYSTEM_ID=
CLIENT=
[LANGUAGE]
LANG=EN
[LOGGING]
Level=4
[REQUIRED_BAPI_WRAPPER]
com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT

Hi Tahir, please help me check the log below
Agentry Runtime Worker Thread###throwExceptionToClient::begin |
Agentry Runtime Worker Thread###throwExceptionToClient::com.syclo.sap.material.steplet.MaterialSteplet::throwExceptionToClient::397::MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER |
Agentry Runtime Worker Thread###Exception: 17:15:35 06/17/2014 : 20 (Agentry3), Java Business Logic Error (com.syclo.agentry.BusinessLogicException: MaterialSteplet - Error in getting the BAPIWrapper name from the ini file or SAP mobile configuration. Please check the ini file or the mobile configuration for the bapi key (com.syclo.sap.material.bapi.materialbapi) either in sections BAPI_WRAPPER or REQUIRED_BAPI_WRAPPER), |
Agentry Runtime Worker Thread###loggedOut::begin |
Agentry Runtime Worker Thread###HNGU3: SESSION END |
Agentry Runtime Worker Thread###BAPI::begin |
Agentry Runtime Worker Thread###create::nulled repository::created new repository |
Agentry Runtime Worker Thread###create::/SYCLO/CORE_MDW_SESSION1_DEL Connection ID: com.sap.mw.jco.JCO$Client@2656ed99 |
Agentry Runtime Worker Thread###create::Function /SYCLO/CORE_MDW_SESSION1_DEL created |

Check the connect to DB & SAP

Similar Messages

Maybe you are looking for