Check the end date of activation of Adobe CC products

hello,
After installing Adobe CC on our Graphics stations, we can not authorize them to connect to the internet for security reasons ..
To know when to pass on machines (every 180 days with the team agreement), there is a file or key Register with this information.
The purpose is to pass on machines with a wireless key to reactivate the license, but for that I must know the end date of activation.
If you have an answer, I thank you in advance
cordially

Hi Emi
As Ravi rightly said, there is no such field..
Couple of possible ways
1. Check AW01N - Comparison tab - This can tell you in which Year the depreciation would end
2. Develop a Custom Query (SQ01) or Custom report based on Capitalizaion Date + Useful Life = End Date
Br, Ajay M

Similar Messages

  • Error while checking the rate data through installation

    Hi everyone,
    I am facing an error message while checking the rate data for an installation:
    "Internal error: Error when reading internal table IEGER in ISU_O_DEVICERATE_OPEN".
    Please guide.
    Thanks and Regards

    Hi,
    The error comes from FM  ISU_O_DEVICERATE_OPEN include LEG70F40 line number 2555.
    It is giving error on following code of line in FM.
          find the serialno.
            loop at ieger into eger_wa
              where equnr = reg_wa-equnr
              and   ab   <= reg_wa-ab
              and   bis  >= reg_wa-ab.
              exit.
            endloop.
            if sy-subrc <> 0.
              perform close_object changing obj.
              mac_msg_put 'E890(E9)' 'IEGER' 'ISU_O_DEVICERATE_OPEN'
                                     space space input_error.
              if 1 = 2.  message e890(e9) with ' ' ' ' ' '. endif.
            endif.
    I think that you are not checking the active installation. Check whether that installation has proper ebtry in table EASTS.
    Try changing
    BIS     BISZEITSCH     DATS     8     0     Date at Which a Time Slice Expires
    AB     ABZEITSCH     DATS     8     0     Date from which time slice is valid
    data for the installation.
    If this dosent work then debug the program by putting break point on the mentioned line and check.
    Regards,
    Pranaya

  • Extend End date after the end date has reached

    Hi gurus,
        We are using SRM5.0 on ECS with backend ECC5.0.
        We notice that after the end date of bid has reached even though there is a bid submitted by supplier , the purchaser still can extend the end date to a later date as long as he has not made the accept or reject choice.
        If it is the case, the purchaser can view the price after the end date reached and then extend the end date and maybe tell other supplier what the price the opponent has submitted. This is not allowed and should be penaltied.
        We just want to know how to avoid this in the term of system. Can we make the
    end date field unchangeable after the end date has reached? or any other solutions?
    Thank you in advance.
    Message was edited by:
            YE Wang

    Hi,
    As Teja and SAndeep mentioned,you can go for either the Approval or BADI approach.
    In case you are implementing the BADI,you can make the concerned fields grayed out so no changes are made but then this would mean that <b>no changes
    </b> can be done at all after the END date has been reached.
    In case of workflow,you can have you starting conditions in which you will compare the end date and the system date .If same,you can trigger  a Workflow for approval of any changes to be done further.So even if the changes are made,the chnages are approved by a higher authority.
    Another way would be to implement the "BBP_DOC_CHECK_BADI" to check whether the end date has been reached and then allow the user to do any changes.You can use the FM "BBP_PD_BID_GETDETAIL" to get the details of the BI and then check.In this case,you can additionally check for other parameters of the User like role,authorisation based on which he can make changes in exceptional cases.
    BR,
    Disha.
    <b>Pls reward points for useful answers.</b>

  • Error :The user cannot be enabled because the end date is passed.

    Hi
    While running eBusiness HRMS Terminated Reconciliation, OIM picks the Users End Date and if that End Date is passed, the user is Disabled. I think the connector should behave this way. Pls correct me if I am wrong.
    But, what's happening is, when I run the eBusiness HRMS Terminated Reconciliation, I am getting the below error and in the recon manager I can see the End Date as earlier date but the user is still Active. It is not changing to Disabled.
    ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcUSR/validateProvDates Error :The user cannot be enabled because the end date is passed.
    ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcDataObj/save Error :Data Update Failed
    ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.DATABASE - Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
    java.lang.Exception: Rollback Executed From
         at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcRCE.modifyUserStatus(Unknown Source)
         at com.thortech.xl.dataobj.tcRCE.linkToUser(Unknown Source)
         at com.thortech.xl.dataobj.tcRCE.applyActionRules(Unknown Source)
         at com.thortech.xl.dataobj.tcRCE.checkDataSorted(Unknown Source)
         at com.thortech.xl.dataobj.tcRCE.eventPostUpdate(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.update(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcRCE.reapplyRules(Unknown Source)
         at com.thortech.xl.ejb.databeansimpl.tcRCEBean.reapplyRules(Unknown Source)
         at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl.reapplyRules(tcRCE_4tknfu_EOImpl.java:200)
         at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
         at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.SERVER - Class/Method: tcDataObj/save Error :Data Update Failed
    ERROR [ACTIVE] ExecuteThread: '12' for queue: 'weblogic.kernel.Default (self-tuning)' XELLERATE.DATABASE - Class/Method: tcDataBase/rollbackTransaction encounter some problems: Rollback Executed From
    java.lang.Exception: Rollback Executed From
         at com.thortech.xl.dataaccess.tcDataBase.rollbackTransaction(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.rollback(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.doRollback(Unknown Source)
         at com.thortech.xl.dataobj.tcDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcTableDataObj.save(Unknown Source)
         at com.thortech.xl.dataobj.tcRCE.reapplyRules(Unknown Source)
         at com.thortech.xl.ejb.databeansimpl.tcRCEBean.reapplyRules(Unknown Source)
         at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl.reapplyRules(tcRCE_4tknfu_EOImpl.java:200)
         at com.thortech.xl.ejb.beans.tcRCE_4tknfu_EOImpl_WLSkel.invoke(Unknown Source)
         at weblogic.rmi.internal.activation.ActivatableServerRef.invoke(ActivatableServerRef.java:85)
         at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
         at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
         at weblogic.security.service.SecurityManager.runAs(Unknown Source)
         at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
         at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    I dont know why OIM is trying to Enable User.
    Pls Help
    Edited by: AAG on 25 Jan, 2011 4:12 AM
    Edited by: AAG on Feb 3, 2011 12:43 AM

    I am getting the same error. Any idea which field OIM considers as signal of disabling the user? Status or Termination date?

  • "The end date can't be set to occur before the start date" issue

    I have a subscribed calendar that draws from data in a Filemaker database. In all of these records, the start date & end date are the same. When I try to refresh the description, it fails with a "NSCocoaErrorDomain / error 1560" error, and the console log shows "The end date can't be set to occur before the start date."
    Well, it doesn't occur before the start date. It's the same as the start date. I can work around this by setting my Filemaker database to add a day to the end date, but that's a clunky solution.
    Anyone else run into anything like this?
    (iCal 4.0.3 and OS X 10.6.4, btw)

    It may not be the same problem, but the message was the same (end date...etc). I tore my hair out at the time trying to solve it. It was on my fathers computer. Everything appeared to be correct and consistent. What solved it was logging into MobileMe/account/personal info/time zone, where I found the time zone was wrong. I can't remember the detail now but at the time it seemed like a third place where time had to be correct. Worth your checking there anyway.

  • Short dump while changing the end date of infotype 0167 through PA30

    Hi all,
    I am getting short dump while changing the end date of infotype 0167(Health Plans) through Tcode PA30.
    dump descript is as below
    An exception occurred that was not caught.
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_HRPA_VIOLATED_POSTCOND
    Date and Time          11.03.2010 07:06:26
    What happened?
        The exception 'CX_HRPA_VIOLATED_POSTCONDITION' was raised, but it was not
         caught anywhere along
        the call hierarchy.
        Since exceptions represent error situations and this error was not
        adequately responded to, the running ABAP program
         'CL_HRPA_SAPUP50R_ADAPTER======CP' has to be
        terminated.
    thanks
    shahid

    Search OSS Notes for that.

  • Extending the End Date of Relationship Org. Unit and Position

    Hi All,
    Please help me below.
    Problem: The end date for the relationship between org. unit and position should be set back to 31.12.9999. It was accidentally been set to 31.03.9999 and results to two records in infotype 0001, which the wrong record should be deleted.
    This can only be deleted by changing the relationship end date in PO13 but unfortunately, the user doesn't have any access to this transaction.
    Request: Can you explain to me on how the end date can be change in transaction PPOME or PPOM_OLD as these are the only transactions the user has an access. I'd already explored these transactions but I can't find on how it should be deleted here.
    Thanks!

    Hi Raju,
    Thanks for this information. This was a very helpful answer. But I only need to extend the end date of a particular infotype 0001 record of a particular employee. I think the report will extend all of the records of all the employees in the system. I can't find any parameter in the report wherein I can set the employee number I wish to extend the end date.
    Thanks!

  • I am unable to accept the end user licensing agreement for adobe reader on my mac.  How do I fix this.  I can not open any files.

    I am unable to open any pdf files because I have not accepted the end user licensing agreement for adobe reader.  I can not find the accept button.  I have a mac.

    What is your screen resolution?  Can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933

  • How can I check the expiration date of a Certificate Keychain from terminal?

    Hello, I am writing a bash script to alert me when my corporate certificates are about to expire. How can I check the expiration date of a certificate in keychain? I'm running Mac OS 10.6.8 on a newer MacBook pro with full admin rights.
    Specifically I will be checking three certs: a Root Authority, Issuing Authority, and a user cert (Identity).
    I was exploring the Security and Openssl command line tools. But I can't seem to get the info I need.
    Any recommendations would be appreciated.
    Thank you!

    Anyone?

  • How to check the master data records in using SE16 transaction?

    Hi,
    Can you please help me to check the master data records using SE16 transaction?
    Loaded master data for Characteristic and want to check the records in the master data tables.
    Thank you for your help!
    Lakshmi

    Hi!
    Welcome to SDN.
    you have to check the master data tables.
    soo in Se16 you have to select the appropriate master data table and view the data.
    following thread explains about masterdata tables
    MasterData table?
    regards
    mohan
    Message was edited by:
            Mohan Krishna

  • How to get the End date of the dynamic period in Financial Reports

    Dear All,
    I have a issue with the Financial Report, I want to show the text under the Heading in the Balance Sheet like 31 DEC 2008 but in this date should be the end date of the dynamic period what user select in the POV.
    Can any one have any idea about this.
    Regards
    rao.

    There are 2 options:
    1. Use the POVAlias text function:
    e.g. <<POVAlias ("Grid1", DimName)>>
    (you could also use POVMember if the items you want is the member and not the alias).
    2. Have a hidden column on the report referencing the POV selection, then reference this in the header.

  • HT4623 i just update software in my iphone 3gs but at the end its not activating my iphone

    i have updated software in my iphone 3gs by plugging wire with my laptop but at the end its not activating so, i just want to know how can i activate software update 6.1.2 on my iphone 3gs

    Your iPhone was not officially unlocked and has now relocked to the original cell carrier. Call AppleCare, give them the model and serial number of your iPhone and find out which cell carrier it is locked with. Next contact that cell carrier and see what their unlock process is and if you qualify.

  • CRM-ISU: Need to change the END date and Start Date for contract items

    Hi,
    There is an old contract item for which  I need to change the end date
    and there is a new contract item for which I need to change the start date.
    I need to change the contract item end date and start date using some function module in IS-U system (may be as RFC to CRM).Pleaselet me know if any body is ware of this functionality?
    I am aware of a FM EECRM_CONTRACT_DATE_CHANGE which may be used for changing End Date
    but how to change the start date of a new contract item?
    Please let me know if any body is aware of this?
    Thanks

    Hi,
    Hope you can solve it by this [Link1|Re: Function modules; [link2|CRM material;.
    Regards,
    Surjith

  • Can you please check the purchase date of my macbook pro by serial number c02m3av4fd56? thx!!

    can anyone check the purchase date of my macbook pro by serial number c02m3av4fd56? thx!!

    Use this link.  https://selfsolve.apple.com/agreementWarrantyDynamic.do

  • How to check the expired date of a public key stored in my keyStore

    Hello,
    I would like to know if there is any possibility to check the expiration date of a public key which is present in my keystore.
    I did read the help of keytool but did not found any explanation about that.
    Thanks in advance for your answers.
    Alain.
    Message was edited by:
    Philipina

    Public key doesn't have an expiration date. Certificate has. Run keytool -list -v and you can read something looks like:
    Valid from: ... until: ...

Maybe you are looking for

  • How to return xmlType from Webservice generated with JDev and PL/SQL

    Hi, I have generated an PL/SQL package that's returning a value as xmlType. With JDeveloper I'm deploying this package as a webservice. When invoking the webservice from a webbrowser the result looks like: <?xml version="1.0" encoding="UTF-8" ?> <SOA

  • Parse multiple files in one flat file?

    Hi all, I'm currently working with flat file with  this kind of structure: "849000","1","2","3","4"             <- begin of file "849HD","","1939","12"              <- header level "849D1","39193","313","1"         <- detail level "849D2","","descrip

  • ITunes Match messing with Disk Permissions

    Ever since I updated my iPad to iOS 7, I have been getting this when I run Verify Disk Permissions on my RMBP. I have ran Repair and it says successful, but after running Verify Disk Permissions again the list is still there. ===== Display starts at

  • Using read() to get byte and readLine to get textline at the same socket

    Hi: I know that readLine is used in BufferedReader and read is used in BufferedInputstream, but can I read some lines by readline, then read some byte by read. Because InputStreamReader is used to change from Inputstream to Reader ,how can I change f

  • Telecharger version d'essai adobe photoshop 12 sur 2PC différents

    bonjour J'essaye de telecharger la version de Photoshop 12 sur mon Pc de bureau et sur mon Pc portable,mais la 2° fois ça ne marche pas . En effet je pars dans un endroit ou je n'ai pas internet avec mon PC portable.Or lorsque j'ouvre cette 2° versio