Check the level of phone battery + J2ME
i'm leaving in a developping country , i need to develop a midlet that will send an sms to somebody when the courant goes off , the midlet will be installed on a phone that will be permanently connected to a power outlet
My question is is it possible in J2ME to do such a thing( detect that the battery is not charging meaning that the courant went off and of course detect the contrary)
I'm a beginner in this stuff and I'm using netbeans 6.1 IDE
Battery level detection isn't a part of the standard API, but some manufacturers do have a proprietary API which facilitates this. Check out the developer area of the manufacturers' websites.
But AFAIK this will only give you the battery level, not whether it's charging or not.
db
Similar Messages
-
I recently got a an iPod 5 generation as a gift and while I was in my settings I turned on the voice over to check the percentage of my battery, so I turned it off and now I can't unlock it. Even when scrolled my fingers on the screen and typed the password but it would unlock, please can some one help me with this
You have the accessibility VoiceOver feature turned on.
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. If problems see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom) -
I'm trying to check the status of my battery. My shuffle is on, I'm pressing the voice over button twice, but I don't get any light at all. What should I do?
Hi, Jenny.
You may find this article helpful in troubleshooting your iPod shuffle.
iPod shuffle
http://www.apple.com/support/ipodshuffle/assistant/itunes/
Regards,
Jason H. -
Hi
I would like to know how I can check the model of my phone? On its case it only says Treo.
Thanks.
Post relates to: NoneDoes your Treo have Windows mobile or Palm OS?
To verify the model, take out the battery and look for the model on the sticker in the batery compartment. Do not look on the battery. It should say something like treo 680, 700W, etc.
You can check the support page for smartphones on Palm.com and this may help ID the model you have. http://kb.palm.com/wps/portal/kb/na/deviceselector/page_en.html#NA%20Phones
Click on your model, click on your carrier and the next page is the support page for your Treo. There you will find different tabs on the page, home, learn downloads, etc. On the learn tab under guides and more is the user guide.
Message Edited by cygnusX1 on 01-18-2010 09:47 AM -
How can i check the condition of my iphone 4 battery?
Is there a way to check the condition of a battery in an iphone, to see the number of cycles and present capacity?
there are some apps in the app store but it's all statistics
a technology like batteries is soooo analogue the only thing the iphone have access to is
the volt level the batt can currently provide -
Tips For Choosing the Best Samsung Cell Phone Battery
It is difficult to imagine the world would be like if you do not use a mobile phone! We have become so dependent on the use of Samsung mobile phones, we will be panic, if we mistakenly forgot at home. The Samsung mobile phone is a key part of most people's lives, and get them up every minute of friends, family and business partners.
Taking into account a new Samsung mobile phone purchase, but also consider the Samsung mobile phone battery. Here are some suggestions to help.
More standby time and talk time, you should choose a Samsung cell phone battery with high capacity. However, when you select a high-capacity Samsung mobile phone battery, there will be a heavier weight. A bigger Samsung cell phone battery, cell phones can not enter the cell phone pocket, or protectors. If you plan to travel a lot with the phone, which could lead to a problem, your phone may not be easy to carry.
Select the Samsung cell phone battery, lower cost, and may not be the best choice, quality. Make sure you ask if you buy a new battery or refurbished one, which is a key issue! Tips to find a renovation is the incredibly cheap price. Refurbished batteries may have old parts, it may not work as effectively as a new battery.
Buy a new battery, you get a guarantee that if you have any questions? Remember, some just do not work, as long as expected. Usually Samsung phone manufacturers will provide a new battery only when it is purchased in a specified amount of time.mtongy wrote:
we will be panic, if we mistakenly forgot at home.
i won't. -
Can anyone tell me how I might be able to accurately check the level of my Audio within FCP 10.1.1 in dBFS and also how to ensure that when I complete a project that my exported (Pro Res 422) version is precisely that level. NB. I don't want to tamper with my audio in any respect (eg. with a Limiter or similar) as I intend making music video clips for broadcast and would prefer not to alter any of the dynamics of the mastered mixes, as well as being certian I am not exceedig the -10dBFS delivery standard required by our local television stations. Any help or suggestions will be much appreciated, have spent ages looking for answers to this.
As a video editor of an advertising agency, and always making TVCs for TV stations, I totally understand your frustration when they insist the required audio level, and I was suffered with this problem badly.
I ended up with not using the audio meter in both FCP 7 and X because they are simply not accurate, or probably even not measuring the things we need, instead, I use WAVES WLM Plus Loudness Meter plug in, and set it to the audio standard suits your station or country, like OP 58 in Australia, etc.
www.waves.com/plugins/wlm-loudness-meter
I hope this helps. Good luck. -
My phone Battery level, (n97 mini)?
Hi,
I have a N97 mini and I have looked around but I don’t seem to find what my battery level is.
I know about the indicator on the top left hand side, but that’s a very vague indicator.
Is there a way of checking the battery level on the phone a little bit more accurately?
Thanks
FFMGYou can download free battery utilities that should do that for you from www.ovi.com. There are a few of them there. Just select the ones that best suites your requirement and try it out.
-
My iPhone 5 which has been working fine has only today started to get these problems. The phones battery percentage stays at the same number and only changes if i swith it off or when it does it byitself but then stays at that number. When I use it it constantly turns off by slowly fading then showing white and black lines then going off. The screen is now shaking and keeps turning off. It was on IOS 6 which I just updated as I thought this could be the issue but it still does the same thing on IOS 7. Has anyone else experienced these problems or know what is wrong with my iPhone?
Please reply!Sounds like the device is failing. Since you updated to iOS 7, that would do the same as a restore. I would make an appointment at the Genius Bar at Apple to have the device checked.
-
So I just got a 3 months Old iphone 4s which is still under warranty. I charged my phone to 100% last night before going to bed. When i woke up at 8 in the morning my phone was switched off and the battery was drained . This is ridiculous that I dint use my phone while i was asleep and the battery drained completely. Even though, Apple store replaced my battery with a new one. I had set alarm for 8è o clock and my phone had died and due to that i woke up at 8:40am. I had turned off my location services, ping and even 3G to monitor the usage. Has any one been expeirencing this kind of problem ?
I am so going to apple store today to get an replacement, this is ridiculous I cant wake up in the middle of the night to check if my phone has juice init to wake me up in the morning for the work. I have been using apple phones since 2008 and never came such problem . Please assist me as this phone is the main source of communicating with the rest of the world.Have you stopped the app running in multi tasking? To do this double click your home button, select and hold any app until it jiggles. Select the no entry sign to stop the app from running.
-
How can I check the percentage of my iPhone 5's original battery capacity?
I'm wondering if there's any way I can check what the capacity of my iPhone 5's battery is compared to its original capacity. I know Apple will replace the battery for free if it is under 50% of the original capacity since it's still covered under the one-year warranty but I'd rather know that's the case before I send it in and go without a phone for a week.
A problem does exist; it takes significantly less time for me to deplete my battery now than it did when I bought my phone. Please stop acting like this discussion is over just because you cannot answer my question. I would like to seek the knowledge of other regarding ways to check my battery capacity. I appreciate your suggestions, but I purchased an iPhone 5 because it was an upgrade to the iPhone 4 and it was supposed to have the same battery life. However, 20 months after I purchased my iPhone 4 the battery still lasted longer than the battery in my 11 month old iPhone 5. My warranty expires in a few weeks and I need to know now whether I should send it because once the warranty expires a battery replacement is going to set me back $80 plus shipping fees.
-
I don't know what to do. My iPhone 4 just all of a sudden had a blank white screen. It still shows the bar at the top with the signal, time, and battery life. But the rest of the screen is white. If I touch the screen it acts like it's selecting something and gives me the choice to "Copy". It will still charge when I plug it up, but i cannot turn it off or lock the screen. I tried leaving it alone for awhile to see if it will lock on its own, like it normally would, and all it does is dim the screen. I guess im going to try to just let it die, and then see what happens, but if anyone else has any suggestions (other than taking it in to be looked at or getting a new phone) I would greatly appreciate it!
Any number of things could have caused the phone to do this. If after the reset you are experiencing additional problems, the next step in the troubleshooting process is a restore from a backup. Make sure you have one before you start the restore process. If that does not improve things, then you may have to restore as a new device. Remember, restoring as a new device will delete all data off the phone. Make sure all of your pictures are imported to the computer and all other data is synced to supported applications on the computer before restoring as new. See this support document about backups http://support.apple.com/kb/HT4946, and this about restoring the phone. http://support.apple.com/kb/HT1414
-
Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3
Could it be because the SIM card got damaged while I cut it to fit the IPhone?
Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
Or somehow the Chinese carrier found out and locked it?
No, which is not possible.
What can I do? Get a new SIM and see if it works again?
Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget. -
How to check the current EHP stack level? in SAP
Dear All,
How to check the current EHP stack level? in SAP . i have checked forum before i am posting but still comfused .
same one said SAP_APPL , EA_Appl and SAP _HR is 60n if n=1.2.3.4. if n =1 is enhanced package 1 similarly 2,3,4 .
some one said SAP_BASIS 701,702,703,704 . according ehp1,2,3,4.
Pls check the details and confirm either is ehp1 or ehp4 .
Component version is simply shows SAP ECC 6.0 in system -> status.
Software Component - Release - SP level
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
SAP_HR 604 0029
SAP_HRCAR 604 0029
SAP_HRCAT 604 0029
SAP_HRCAU 604 0029
SAP_HRCBE 604 0029
SAP_HRCBR 604 0029
SAP_HRCCA 604 0029
SAP_HRCCH 604 0029
SAP_HRCCL 604 0029
SAP_HRCCN 604 0029
SAP_HRCDE 604 0029
SAP_HRCDK 604 0029
SAP_HRCES 604 0029
SAP_HRCFI 604 0029
SAP_HRCFR 604 0029
SAP_HRCGB 604 0031
SAP_HRCHK 604 0029
SAP_HRCID 604 0029
SAP_HRCIE 604 0029
SAP_HRCIN 604 0029
SAP_HRCIT 604 0029
SAP_HRCJP 604 0029
SAP_HRCKR 604 0029
SAP_HRCMX 604 0029
SAP_HRCMY 604 0029
SAP_HRCNL 604 0029
SAP_HRCNO 604 0029
SAP_HRCNZ 604 0029
SAP_HRCPH 604 0029
SAP_HRCPT 604 0029
SAP_HRCRU 604 0029
SAP_HRCSE 604 0029
SAP_HRCSG 604 0029
SAP_HRCTH 604 0029
SAP_HRCTW 604 0029
SAP_HRCUN 604 0029
SAP_HRCUS 604 0029
SAP_HRCVE 604 0029
SAP_HRCZA 604 0029
SAP_HRGXX 604 0029
SAP_HRRXX 604 0029
EA-IPPE 400 0018
EA-APPL 604 0008
EA-DFPS 600 0018
EA-FINSERV 604 0007
EA-GLTRADE 604 0008
EA-HR 604 0029
EA-HRCAR 604 0029
EA-HRCAT 604 0029
EA-HRCAU 604 0029
EA-HRCBE 604 0029
EA-HRCBR 604 0029
EA-HRCCA 604 0029
EA-HRCCH 604 0029
EA-HRCCN 604 0029
EA-HRCDE 604 0029
EA-HRCDK 604 0029
EA-HRCES 604 0029
EA-HRCFI 604 0029
EA-HRCFR 604 0029
EA-HRCGB 604 0029
EA-HRCHK 604 0029
EA-HRCID 604 0029
EA-HRCIE 604 0029
EA-HRCIN 604 0029
EA-HRCIT 604 0029
EA-HRCJP 604 0029
EA-HRCKR 604 0029
EA-HRCMX 604 0029
EA-HRCMY 604 0029
EA-HRCNL 604 0029
EA-HRCNO 604 0029
EA-HRCNZ 604 0029
EA-HRCPH 604 0029
EA-HRCPT 604 0029
EA-HRCRU 604 0029
EA-HRCSE 604 0029
EA-HRCSG 604 0029
EA-HRCTH 604 0029
EA-HRCTW 604 0029
EA-HRCUN 604 0029
EA-HRCUS 604 0029
EA-HRCVE 604 0029
EA-HRCZA 604 0029
EA-HRGXX 604 0029
EA-HRRXX 604 0029
EA-PS 604 0007
EA-RETAIL 604 0007
FINBASIS 604 0008
ECC-DIMP 600 0018
ERECRUIT 604 0008
FI-CA 604 0008
FI-CAX 604 0007
INSURANCE 600 0018
IS-CWM 600 0018
IS-H 600 0024
IS-M 600 0018
IS-OIL 600 0018
IS-PS-CA 604 0007
IS-UT 600 0018
LSOFE 600 0018
SEM-BW 604 0008
ST-A/PI 01M_ECC600 0001
Regards
Edited by: satheesh0812 on Nov 17, 2011 7:57 AMHi Sateesh,
SAP_ABA 701 0007
SAP_BASIS 701 0007
PI_BASIS 701 0007
ST-PI 2008_1_700 0003
SAP_BS_FND 701 0008
SAP_BW 701 0007
SAP_AP 700 0021
WEBCUIF 700 0008
SAP_APPL 604 0008
Based on the component information provided by you, I can conclude that your system is ECC 6.0 EHP4.
EHP4 is derived from your component SAP_APPL 604.
In addition to this your EHP4 system has NW stack on NW 7.0 EHP1.
Hence your system is ECC 6.0 EHP4 with NW 7.0 EHP1.
Hope this answers your query.
Regards,
Deepak Kori -
How to check the validation at data base level as well as current user ente
Dear all
i have creation page in that item code will not enter the duplicate values
in that creation page contains advanced table
user will click on create 15 blank records using add another row
suppose in first row user will enter LAPTOP assume this item code
in this case i need to raise exception through databse level
in second row also user enter LAPTOP1 in this case exception will not raise becaause data is not there at databse
in third row user will enter LAPTOP1 in this case item is not there in data base but it is there in second row in this case
i need to raise exception
how to achieve this
Thanks in Advance
SreekanthYou can validate this in form submission.
1. Call a method in AMImpl.java
2. loop the ViewObjects and check the values
3. If you find a match, throw the error
--Prasanna
Maybe you are looking for
-
Help... I need help to install a server for my form to run on web
Hi there, I installed a New server with Windows 2003. I have some oracle forms developed using 6i, I don't mind to convert them later. What other oracle 10g software I need to install to have my oracle forms and reports to run on web? I tried to inst
-
Can I get rid of the Adobe folder(s) on my Desktop after installing or updating?
Can I get rid of the Adobe folder(s) on my Desktop after installing or updating?
-
Fillable form check boxes won't check
Hi there, I've just created a fillable form with check boxes. They worked fine to start with but when you close the document and reopen it, you can click the boxes but they just flash and don't fill in. Has anyone else had this problem and know how t
-
(winxp+oracle11g) failed to connect oracle remotely.
I installed oracl11g in my winXP host (ip1) and in another winXP (ip2) host reside in a vmware workstation which is on ip1 too. The vmware uses bridge to connect network. I can ping ip1 from ip2 and and vice versa, but i can not tnsping oracle on ip1
-
Is there a fix for maverick? I can't scroll or use the back/forward buttons. Help!