Check the wireless status (Tx/Rx SNR) on my iPhone4

How can I check the wireless status (Tx/Rx SNR) on my iPhone4? Is there any internal indicator built-in?

Hi Kgirl000,
Welcome to the HP Support Forums. I see that you would like to print wirelessly to your Envy 4500 printer.
When using the Wireless Direct network, you need to connect the devices to the network the printer is broadcasting to be able to print. I have included the description of what HP Wireless Direct is from the
HP’s Wireless Printing Center.
HP wireless direct is a new feature that allows your Wi-Fi capable devices (for example: smart phones, tablets, or computers) to make a wireless network connection directly to your printer without using a wireless router or access point. You connect to your printer’s HP wireless direct signal the same way you connect your Wi-Fi capable device to a new wireless network or hotspot.
I suspect that is not what you are trying to accomplish. Let’s start by connecting your printer to your wireless network. This can be easily accomplished from the front panel of the printer. The steps can be found on page 53 of your User Guide in the section titled “To connect the printer”. You will need to know the name of your wireless network (that is the SSID) and the password to your wireless network.
To switch your laptop from a USB cable connection to a wireless connection I have included the Installing the Printer Software for a Wireless Network Connection document. It has a different section for each of the operating systems. Within each of those sections is the instructions to switch to a wireless connection. Please click on your operating system and follow the instructions.
You should now have no issues printing from your mobile devices when they are connected the same wireless network the printer is connected to.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Similar Messages

Check The Job Status

Hi SAPsimhas,
My requirement is as below.
I will loop through an internal table and create some files with background processing method.(JOB_OPEN,SUBMIT & JOB_CLOSE)
Now once this job is triggered I need to check the status for that job after maximum 10 mins. Its not neccessary that each job will take 10 mins. only,It can be finished in 2 mins also.
Once the job is finished then I will XCOM that file.
So my question is how to code such timer which will check the job status for that job? I have a FM BP_JOB_READ which returns the job status.
Reply is highly appriciated.

Try this way
do.
    call function 'SHOW_JOBSTATE'
      exporting
        jobcount         = p_jobc
        jobname          = p_jobn
      importing
        aborted          = v_aborted
        finished         = v_finished
        ready            = v_ready
        running          = v_running
        scheduled        = v_scheduled
      exceptions
        jobcount_missing = 1
        jobname_missing = 2
        job_notex        = 3
        others           = 4.
    if v_aborted eq 'X'.
      exit.
    endif.
    if v_finished eq 'X'.
      select single * from tbtcp into wa_tbtcp1
                 where jobname eq p_jobn
                   and jobcount eq p_jobc.
      if sy-subrc eq 0.
        move wa_tbtcp1-listident to p_spono.
      endif.
      exit.
    endif.
    if v_count le 10.
      call function 'ENQUE_SLEEP'
        exporting
          seconds = 60.
      v_count = v_count + 1.
    endif.
enddo.
a®

TF244069: An error occurred while checking the provisioning status of the reporting database schema for a PWA instance.

The command TfsAdmin ProjectServer /RegisterPWA causes next error:
TF244069: An error occurred while checking the provisioning status of the reporting database schema for a PWA instance.
Project Server returned the following error: "Server was unable to process request. ---> The request failed with HTTP status 401: Unauthorized.".
(type ProvisionException)
Exception Stack Trace:    at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionPwaDBSchema.HandleSoapException(SoapException soapException, String errorResourceString)
   at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionPwaDBSchema.IsDBSchemaProvisioned()
   at Microsoft.TeamFoundation.Sync.Provisioning.ProvisionManager.Provision()
I installed SharePoint 2013 and Project Server 2013 as farm and TFS 2012 and my account has permissions everywhere. I read article
http://msdn.microsoft.com/en-us/library/gg412653.aspx and gave full permissions for TFS account to SQL and Project, Project app pool account to SQL, but still have an error.
How can I find out what exactly permissions are not enough???

The problem was in claims authentication. Changed to Windows and all worked out.

When I try to sign into iCloud from Windows PC I get the message "You can't sign in because of a server error." When I check the iCloud status, all is Green.

When I try to sign into iCloud from Windows PC I get the message "You can't sign in because of a server error." When I check the iCloud status, all is Green. What is the fix?

Hi spillgar,
If you are having issues signing in to iCloud from your Windows machine, you may find the following articles helpful:
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
iCloud: If you can’t sign in to iCloud.com
http://support.apple.com/kb/ph2611
Regards,
- Brenden

How can I check the return status of a request using URLConnection?

Hi,
I am using the classes URL and URLConnection to connect to a remote server and make a POST request. The code extract is:
URL u = new URL("http://.....");
URLConnection con = u.openConnection();
con.setDoInput(true);
con.setDoOutput(true);
con.setUseCaches(false);
con.setRequestProperty("Content-Type", "application/x-www-form-urlencoded");
DataOutputStream out = new DataOutputStream(con.getOutputStream());
out.writeBytes(........);
out.flush();
out.close();
Next, I would like to check the return status of my request. I need to see if the server returned status 200 (OK) or an error (e.g. 404). Is there a way to check this?
If you are aware of another way I can achieve this whole thing I would be grateful if you could let me know.
Thanks very much for your help!

URLConnection doesn't have a getResponseCode
method...
But I found a link
http://bugs.sun.com/bugdatabase/view_bug.do;:WuuT?bug_
id=4191207
that helped me found out that there is another class
called HttpURLConnection:
((HttpURLConnection)conn).getResponseCode( )You should read the API:
http://java.sun.com/j2se/1.5.0/docs/api/java/net/URL.html#openConnection()
"If for the URL's protocol (such as HTTP or JAR), there exists a public, specialized URLConnection subclass belonging to one of the following packages or one of their subpackages: java.lang, java.io, java.util, java.net, the connection returned will be of that subclass. For example, for HTTP an HttpURLConnection will be returned,..."

How to check the DTP status (i.e in active mode or not) for the Prior days.

Hi SAP gurus,
How to check the DTP status whether it was in active mode or inactive mode for the prior days ?

Hi Aditya,
Kindly have a look into below links,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00dbbfa9-dba2-2d10-bc80-9d6489e4b1c7?QuickLink=index&overridelayout=true
DTP request Overall status
Hope this helps.
Regards,
Mani

Check the order status

Hi,
When I do the issue goods to production order,the system massage:Current order status 1000043 does not allow goods withdrawals,Check the order status.
But how to check? I can't find the wrong.
regards,
Zhou.

Zhou,
The relesase is getting rejected.
That's y the status is RELR
Follow the path in CO02
Goto-- Logs-- Release.
Here you will get the reaason for the rejection of the release.
It might be due to material unavailability.
You must have done the settings in 'Checking control'.
Execute T code OPJK.
Select the combination of the plant, order type & business function 2 & click on details.
In the next screen against 'Release material' it must be 3. Change it 1 or 2 & save.
Now try to release the order. It will be released & GI can be done.
Hope this helps you.
SmanS

Check the system status

Hi,
I have a simple question for you..
How can I check the system status when i save my order...
The purpose is not save orders whith errors.
Thanks,
Hugo.

Hi Hugo,
You need not do anything with the status.
Just create a BADI Implementation for the BADI definition ORDER_SAVE in SE19.
In the method PREPARE, call the function module CRM_MESSAGES_CHECK_FOR_ERRORS to check for errors in the order. If there are errors in the order then call the function module CRM_MESSAGE_COLLECT to show the additional error message 'Order can't be saved as it contains error' and exit.
You can also do any additional validation that you want. Save and activate the BADI implementation.
Now create an order and see if the code written works or not.
Reward points if it helps.

How can I disable the wireless status LED (T61)?

When I'm working on my laptop and listening to, for example, online radio the wireless status led under the screen keeps blinking (data is being transmitted). I find this extremely annoying and distracting. Is there any way to disable the LED? (but obviously I would still need to be connected). I'm using windows xp on a thinkpad T61.
Help much appreciated!

i would use a black permanent marker or something, or a black sticker. This is the easiest and safest way of doing it, it is perfectly reversable.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

URGENT : Error 5 when checking the job status

Hello Forum,
While monitoring the Process Chains in BW 3.1, I got the following message in the Information Pop-up:
Error 5 when checking the job status
Could you please tell me what it means?
Thank you,
its my duty to assign points,
raj

Hi,
Are you able to view the log after refreshing and clicking the tick mark button on this message or is it not letting you go into the log itself.
Can you directly go to Log view thru Tcode RSPCM and see. Once you are inside try to find where exactly the process failed.
Thanks,
JituK

Checking the connection Status

Is anyone using the cocoaDev NetSocket? I try difficulty in checking the connection status using NetSocket...i open the socket and the connection, but when i'm perfmorming some action that waits for a server response, there's no automatic timeout that control if the connection is up or down after many seconds waited by the same action...

We are using Outlook 2010
I have removed the entry in the LAB using ADSIEdit following this procedure:
http://exchangeserverpro.com/remove-default-public-folder-database-exchange-mailbox-database/
This has resolved the issue there. Why are you opposed to me running this in Production?
Thanks
shapi
I wanted to verify that you weren't using any org forms first!
Since you are using Outlook2010, why not remove the PF distribution on that 2007 OAB as well?
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Essbase Java Apis- Checking the Load status of Cube

Hi all,I am using Essbase 7.1 Java Apis.I want to check the Load status of the Cube.I have used the following Api.Cube.getCubeLoadStatus() However there is problem with this Api.If the Cube is not loaded then when I use this Api for the first time, it shows the status as "Not Loaded".However subsequent calls to the same Api shows that the same Cube is "Loaded".Clearly use of this Api results in loading of a Cube which was initilally unloaded.(I belive, in Administrative console right click on Cube -> Stop results in unloading of the Cube)Please answer my following questions :1) Which Api should I use to check the Cube's load status without affecting its current load state.2)I tried using Cube.isActive() Api.However this Api throws an exception for all states of the Cube.3)What is the diffence between a "Loaded" Cube and an "Active" CubeThanks

1) Which Api should I use to check the Cube's load status without affecting its current load state. <>2)I tried using Cube.isActive() Api.However this Api throws an exception for all states of the Cube. <>3)What is the diffence between a "Loaded" Cube and an "Active" Cube <<Finally one I think I can answer.. A loaded cube means, I believe, that the cube has been loaded by the server and is immediately available. An 'active' cube, on the other hand, is the terminology used to specify that a specific connection is connected to, and using, a specific cube. I know several of the VB/C APIs specify that you must set a cube active (on the connection) before you can use the API.Tim TowApplied OLAP, Inc

Can't check the repair status

Hi,
My iPhone 5S died last Saturday, it just doen't turn on or it's able to charge the battery. I took it to the Madrid's Apple Store Sol where they check the unit and gave me a paper with the repair details (to change the unit basically)
That was 5 days ago and it's impossible to check the status on the web, it says something like "the system cannot provide a status".
- I've called the Apple Care support number with no luck as they cannot access the status either
- I've tried to contact on several ocasion and for several minutes ( I have even learnt that you are disconnected after 20 minutes on the call queue) no one is picking up the calls at the Apple Store.
- Finally I've visited the Store and they could only tell me (after waiting for an hour) that the new phone had not arrived (although when I opened the repair they told me that it should take no more than 2-3 days)
Is there any way to know how long is going to take them and the current status?
thanks!!
Ruben

hi
the same thing happens to me!!!!i can't check my repair status neither!is there a maintenance thing going on or what?
thx for answering
sabrina

How to check the port status in IPSec VPN

Hi Experts,
Is there any way by which we can find that the UDP port 500 is blocked at ISP side.
My IPSec VPN configured between two cisco router in production network is not coming up and experts are saying that the ISP has blocked the port 500 somewhere in between, however ISP denying and saying that they dont block any port.
kindly suggest what whould be the best wayout?
Thanks

Thanks Marvin,
How could I capture the traffic from initiating peer so that I can figure out that UDP port 500 is blocked or not, with the help of wireshark...
In my network ONT/Modem (having four ethernet port) is installed at both the end and from one of its port the router is connected at each side and IPSec VPN is configured between the router. to check the UDP port status, my question is, should i connect my laptop (running with wireshark) with one of the port of ONT and capture the traffice or is there any other way and how that traffice will tell me that port 500 is blocked or not?

I bought an used ipod touch gen 4 but I can't check the warranty status of my device. Could anyone help me please!

I did use the serial number of my ipod to check on Apple website but there is no result for my ipod. They required me to provide the purchase date, which I don't know because my ipod is a 2nd hand device. I tried to reset my ipod and activate it again but it doesn't work and itunes gives me an error message.
How could I check my warranty status and the purchase date?

You can try contacting Apple:
Apple - Support - iPod touch - Contact Us
Maybe we can help you with the problem. What is the wording of the error message you are getting? The following lists the common errors and their resolution.
http://support.apple.com/kb/TS3694

Check the wireless status (Tx/Rx SNR) on my iPhone4

Similar Messages

Maybe you are looking for