Check this out: stable Ultra Turbo @ FSB below 218!

Hi guys...
After a little frustating because my Twinx LL can't run MAT stable @ any settings (FSB below 218), and confirmed by many of thread that nobody (ok, some claim they can) can't run Ultra Turbo @ FSB below 218... I have a new hope with Twinx XL! (and maybe other similar new 2-2-2-5 series).
Finally I found a great match for my 865PE board! Twinx XL! (haven't try another 2-2-2-5 great series from OCZ, Crucial, Mushkin, & Kingston)
Now I could run Ultra Turbo MAT below 218 stable with this board. See this:
FAILED:
- FSB 218, timing 2-3-2-5, Ultra Turbo: (CPU-Z confirmed PAT on)
--> Bandwith: 5423/5413
--> Cache & Memory: 10007/11.1
--> Prime95: seconds... not stable...(just like my old Twinx LL)
- FSB 218, timing 2-3-2-5, 2.9v, Ultra Turbo:
(CPU-Z confirmed PAT off --maybe by set CAS to 2.5, however it run on CAS 2-- )
--> Bandwith: 5347/5337
--> Cache & Memory: 9928/11.5
--> Prime95: 3 hours 13 minutes... not stable... but pretty enough, huh?
(however, I'm not to sure how to make CPU-Z said PAT off while MAT ON & FSB
STABLE:
- FSB 209, timing 2-2-2-5 (!), Ultra Turbo: (CPU-Z confirmed PAT on)
--> Bandwith: 5233/5223 (hey, this is only with FSB 209!! overcome 875 boards? hehe...)
--> Cache & Memory: 9847/10.6 (see, how fast the speed factor is!)
--> Prime95: 42 Minutes (ok, it's not enough, but I don't have time)
- FSB 216, timing 2-3-2-5, 2.9v, Ultra Turbo:
(CPU-Z confirmed PAT off, just like 218 above)
--> Bandwith: 5294/5318 , 5314/5317 , 5287/5293 , 5325/5282 , 5324/5317 , 5318/5325 (ok, rate it yourself )
--> Cache & Memory: 9847/11.4 , 9851/11.3
--> Prime95: 6 hours (how 'bout this?)
So?
Am I achieved good scores? Remember, it's only PC3200... Please, give me feedback!
(note: I have updated my sig, see those XL's have come in)
nb: I trade my LL with XL and only pay $15. I think it's okay.
O yeah, and I could run FSB 233, 2-3-3-6 easily, and more I think, as Corsair (and review sites) said it could run to FSB 250. Yeah however Corsair is not alone, OCZ, Kingston, and Mushkin already released their RAM with Samsung chip, which perform similar. Also Crucial with Ballistix (using their Micron chip) give a great performance according to http://www.anandtech.com.

hi, NovJoe
Quote
I can say that it's at the correct level that you can obtain with PC3200 RAMs.
I don't think so. As many couldn't run stable MAT @ ultra turbo with FSB below 218, am I right?
Quote
I wouldn't say that it's good but you can achieve more with higher speed RAMs
Emm. Yes, with more heat of course . I just try to get the max with the minimum. And I can get that bandwith (around 5300) only @ FSB 233, which brings my CPU to 3.26 Ghz. Compare this with FSB 218, 3.05 Ghz. I think it will be cooler.
Quote
Next, since your thread is mainly on Overclocking,
No... my point isn't overclocking, but only get stable Ultra Turbo MAT (below 218 of course), which is a great feature (can get this board overcome some 875 system). And many 865PE Neo-2 users want to use this feature (including me).
But, it's ok, up to you, Sir!

Similar Messages

I am getting pop ups on safari and firefox lately and am worried i may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

I am getting pop ups on safari and firefox lately and am worried I may have malware or something now on my computer doing this. What is the best way to check this out for sure and remove it?

Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/

Email virus that says check this out

My wife got an email from a friend that said "check this out". Of course she opened it and now she cannot use Facebook--any ideas on what this is and how to fix it?

What OSX version?
ClamXAV, free Virus scanner...
http://www.clamxav.com/
Free Sophos...
http://www.sophos.com/products/enterprise/endpoint/security-and-control/mac/
Little Snitch, stops/alerts outgoing stuff...
http://www.obdev.at/products/littlesnitch/index.html

After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has mult

After renaming my MAC hard drive, Acrobat, Illustrator and Bridge fail to launch. Acrobat returns the error message "An internal error occurred". I've checked this out and it seems related to user permissions. The version is Acrobat X. My machine has multiple user accounts. Any help would be appreciated. I renamed the drive to its original name but to no effect. RR

I resolved the issue.
The problem is indeed a permissions issue with the Adobe Application Support folder.
First, in MAC OS Lion the ~/Library/ folder is hidden by default. You must unhide it in order to proceed. (if it is already visible in your ~/User/ folder, proceed to Step 4.)
Next launch the Terminal application.
At the command line, paste the following command line: chflags nohidden ~/Library/
Go to /Users/youruserid/Library/Application Support/Adobe
Get info on the ~/Adobe folder and reset your permissions to read/write and apply to all enclosed folders
Problem solved. RR

Hey guys check this out!!

I though that Tiger was only able to run in apples pcs I guess not....this is crazy.
Check this out http://os-emulation.net/pearpc/web/tiger.html I have never seen this before Have you guys?

PearPC is a Mac emulator. It creates a virtual Mac on the Windows box, similar to (but the opposite of) Microsoft's Virtual PC for Mac.
I'd guess it's slow and unreliable, but certainly possible.

MOVED: Whooo , Check this out.

This topic has been moved to Overclockers & Modding Corner.
Whooo , Check this out.

HTT x4 , i try`d les aggressive timings and lower HTT but 255 is the max with 3.3 vdimm, unless i get a booster they wont go further.... not worth it, might as well get a Gig of something that can match these speed ands timings.... Well thats what im hoping anyway.

Having Problems with InContext?.... check this out

Hey guys... check it out.. Do your research & you'll quickly learn that i was the #1 proponent of InContext... period!!! I answered more questions for Adobe.. for FREE than anyone.... I'm a little upset to say the least.
I'm coming up with a script that will convert any existing InContext site to a PageLime site with a click of a button.
Based on the overwhelming number of email from those of you interested, I thought I'd write this up real quick.
If you're not using it yet.. check out this video. PAGELIME CMS
Their Video Demo tutorial pretty much sums it up.
In the meanwhile, the easiest thing to do is a simple "Search and Replace" from within Dreamweaver.
Basically, the simple PageLime interface only requires two things.
A unique ID
Any Class name
All it needs is an 'id" and a "class"....
For consistency, I give all mine the same class. It works even if you add it as a secondary pseudo. Here's some examples of the code:
<div id="anything" class="cms-editable" />
or if you already have a class assigned, you could do something like this
<div id="sidebar" class="right cms-editable" />
REQUIREMENTS:
<div id="REQUIRED" class="anything" />
how simple is that??? Duhhhhh!!!
PageLime just figures out the rest. Pages can be php, asp, cfm... anything!!! And the beauty is they are actively listening and updating the core everyday... In the Pro plan, new features just show up. They're working on a full version shopping cart, integration with SiteGrinder3, dynamic content... you name it, they're on it!!!
If you have specific questions, feel free to email me directly ANYTIME... Everyone here will tell you I respond at all crazy times of day, if you have a question, email me and I'm most likely up and on. No more waiting for Adobe to get their lazy a$$'s around to answering questions.
[email protected]
Enjoy guys!! You're gonna like this one!!
-Tommy

I am migrating from SQL6.5 to oracle8i. And its seems that the record are not completely migrated over. Can you give me step by step instructions as what to do.
<BLOCKQUOTE>quote:<HR>Originally posted by Oracle Migration Workbench Team:
We are having problems getting the free space problems reported back through the jdbc driver and are even considering checking for this problem by reselecting out of the repository.
This issue has not been resolved as yet.
Turloch
Migration Workbench Team<HR></BLOCKQUOTE>
null

Delete function--check this out

hey I pretty much just started with Ipod and Itunes.
The first time you delete a song from your Ipod or Itunes library it prompts you to let you know you are deleting something and make sure you're not accidentally you're deleting something you want. Underneath that theres a small checkbox and next to the box it says "Check this box to not recieve this message again," or something to that effect. Stupid me, I checked this box and now its really easy to delete files from my Ipod, if I accidentally hit backspace or delete it deletes the song forever. luckily i have most these files backed up. Still I would like to return to the default setting of having Itunes prompt me before I delete a file...is there any easy way of doing this?
Thanks,
newbie
60g Ipod photo Windows XP

Go here and follow Scotts steps for deleting the pref file http://discussions.apple.com/message.jspa?messageID=607357

Please check this out!!

My problem is date didn't show properly!! why??
final Calendar Today = new GregorianCalendarCalendar.YEAR,Calendar.MONTH,Calendar.DATE);
String showDate = Today.toString()
JLabel abc = new JLabel();
abc.setText(showDate);

Alright.... wicked man!!!!
Yo, check dis out, man....
| |       _
| |      | |
| | _ _ | |
| || || || |
| || || || |
| || _| || |
| |/ /_|| |
| /()/     |
|/ / \    |
----------

Waiting for my new computer!!!! Check This Out dude

Hi all, I´m new here and i´m glad to be a new member in this forum.
I´m just waiting for my new components to arrive, so i want you to check out the specificatios.
AMD Athlon64 3000+ Winchester
MSI K8N Neo4 Platinum SLI
1GB OCZ EL PLat Rev2 - OCZ4001024ELDCPER2-K
MSI GF6600 GT PCIx16 - NX6600GT-TD128E
Rosewill RP550 ATX PowerSupply
The other stuff that is showed of on my signature are allready owned.
I saw many reviews of the motherboard and they said that "Its a Must Have" in Anantech and other ones, But in this forums i saw post saying that there are many problems with.
please Make your opinions.
Thanks

Yea, I agree with whats going on in this thread...at first I was having problems too with the same board (new to MSI and AMD) but did some research and raised the chipset memory a wee little bit (hardocp review had it at 1.75v to get to a 375fsb - wow). I am glad to see you didn't make the mistake I made and went with better memory especially if you plan to oc. I was on a tight budget at the time and am getting decent results now for the ram that I have at the price I got it at ($86). The bios may have some issues with the ht multiplier but when I raised the chipset voltage, i got over this 219 hump and can post up to 225 with ht mult set at 5 (others told me not to go past 1000 htt while others said I should be able to go to 1100 htt - who knows). Well, it all comes down to performance and at 222 with the ht mult set at 3, 4 or 5 doesn't change my 3d and pc marks much as you see below. I think the sweet spot is anywhere between 600 and 900 htt setting.
I was really eyeing the ram that you bought and would love to see some of your test results before I go out and buy the same ram...-- -- need sunglasses when I look left on your posts though...lol
K8N Neo4 SLI, winni 3000 ccbid 0509 oc 222x9
Corsair VS 2x512 max stable 1:1 oc 222x4ht, 2.5,3,3,8,1T
MSI 6600 GT PCIe x1 oc 570/1.14
Seagate NCQ hd x1, NEC 3520 DL optical
3DMark05=4025, PCMark04=4071

If you need cash better check this out...Attorney will show you how....

First of all let me say that THIS IS NOT SPAM!, A LOTTERY, A SCHEME, A CHAIN
LETTER OR A PIRAMID MLM.
Although it may take the appearance of a "chain letter" it is actually a
unique legitimate opportunity for individuals to start their own home based
business by becoming Mailing List Creators and Providers by PROVIDING A
SERVICE.
Dear Friends, Please read this all the way through..Its perfectly legal and it does what it says it will do..No hidden fees..$6,00 will start you on the road to wealth..:
Greetings: I am a retired attorney. A few years ago a man
came to me with a letter. He asked me to verify the fact that this was legal to do. I told him I would review it and get back to him. When I first read the letter my client brought me, I thought it was some "off-the-wall" idea to make money. A week and a half later we met in my office to discuss the issue. I told him the letter he originally brought me was not 100% legal. My client then asked me to alter it to make it perfectly legal. I asked him to make one small change in the letter. I was still curious about the letter, so he explained to me how it works. I thought it seemed like a long shot, so I decided against participating. But before my client left, I asked him to keep me updated on his results. About two months later, he called me to tell me he had received over $800,000 in cash. I didn't believe him, so he asked me to try this idea and find out for myself. I thought about it for a couple of days and decided I really didn't have anything to lose, so I asked him for a copy of the letter. I followed the instructions exactly, mailed 200 copies, and sure enough, the money started coming in! It arrived slowly at first but coming in nonetheless. I kept a precise record of the earnings, and in the end, it totaled $978,493! I could hardly believe it. I met with my friend for lunch to find out exactly how it worked. He told me there are quite a few similar letters around, but this one is different because there are six names at the end of the letter, not five like some others. This fact alone results in your name being in far more returns. The other fact was the help I gave him, making sure the whole thing was legal, since no one wants to take the risk of doing something illegal.
By now you are surely curious to know what small changes to make. If you sent a letter like this one out, in order to be completely legal, you must actually sell something in order to receive a dollar in return. So when you send a dollar to each of the names on the list, you must include these words, "PLEASE PUT ME ON YOUR MAILING LIST" and include your name and address. This is the key to the program. The item you will receive for the dollar you sent to the six people below is the letter. At the time I first tried this idea, I was earning a good living as a lawyer. But everyone in the legal profession will tell you there is a lot of stress that comes with the job. I told myself if things worked out, I would retire from my practice and play golf. I decided to try the
letter again, but this time I sent 500 copies. Three months later, I had totaled $2,341,178! Here are a few reasons a person might give for not trying this program: Some people think they can never make a lot of money with anything this simple. Some are afraid they will be ridiculed for trying Some dream of large sums of money, but do nothing to actually achieve it. Some are just plain lazy. Some are afraid of losing their investment. They think this program is designed to beat them out of a few dollars. The system works if you will just try it. But you must follow the simple instructions EXACTLY, and in less than three months, you will receive $800,000 GUARANTEED! Keep what you are doing to yourself for awhile. Many will tell you it won't work and will try to talk you out of your dreams. Let them know of your success after it works.
LETTERS FROM PARTICIPANTS IN THIS PROGRAM:
Larry McMahon, Norfolk, VA Six months ago, I received this letter and ignored it. Five more came within a period of time and I ignored them also. I was tempted, but I was convinced that they were just a Hoax. After three weeks of deliberating, I decided to give it a try (not
expecting much). Two weeks went by and nothing happened. The fourth week was unbelievable! I can't say I received $800,000 but I received $400,000. For the first time in years, I am debt free. I am doing this again, only this time starting with 500 posts.
INSTRUCTIONS: Immediately send $1.00 to each of the six people on the list at the end of this letter. Wrap the dollar bill in a note saying "Please add me to your mailing list" and include your name and address. Copy this letter. You do not have to type it 200 times. Simply place your cursor at the top of the page, hold it and drag it all the way
down to the end of the letter. Then click on "edit" and select "copy". Now open up a notepad file on your computer and put the cursor at the top of the page in the notepad, click on 'edit' and then select 'paste' and it will copy the letter for you onto your computer. Remove the name next to the #1 on the list and move the rest of the names up one position (#2 becomes #1, #3 becomes #2, etc.....) Then place your name in the #6 position. Then save it, make sure it is saved as a txt. file. This is very a very important step! When you have completed the instructions, take this letter and then go to (Google,Yahoo,Craigslist...) and type in (Money Making Message-board, or POST NEW MESSAGE OR JUST TYPE POST MESSAGE(THIS IS MUCH EASIER AND FASTER),...) and start posting your copy to 200 message boards, or more this is only the minimum, you can post as much as you like...The more copies you send the better the results. Keep a copy of this letter so you can use it a second time. Post it out again in six months, but Post it with the addresses you receive with each dollar. It will work better the second time. NOTE: This service is 100% legal - (Refer to title 18 section 1302 of the U.S. Postal & lottery laws) How does it work? When you send out 200 Posts, it is estimated that at least 15 people will respond and send you a $1.00. ($15.00) Those 15 will Post 200 Posts each and 225 people send you $1.00 ($225.00) Those
225 people Post 200 Posts each and 3,375 people send you $1.00
($3,375.00) Those 3,375 people will post 200 posts each and 50,625 people send you $1.00
($50,625.00) Those 50,625 people will post 200 posts each and 759,375 people send you $1.00 ($759,375.00) At this point your name drops off the list, but
so far you have received $813,615.00. P.S. When your money begins to come in, give the first 10% to charity with spirit and share a good fortune!
#1.Linda Marlow 124 Robinhood Dr., Cassville, MO 65625
#2.Kim Ambriz 991-c Lomas Santa Fe #359 Solana Beach, CA 95075
#3.Cheryl Berglund 2260 El Cajon Blvd. Box 411 San Diego, CA. 92104
#4.Johnathon Stolzenberg 930 W. 35th Place Chicago IL, 60609
#5.Craig Woods 8921 W. Courtland Ave. Milwaukee, WI 53225
#6.John Goettge 5268 Seibert Hill RD SW New Philadelphia,Ohio 44663
This really, really, works! I tried it once and I'm doing it again. First to be honest I only posted 145 posts and I didn't receive a lot only $6,689.00 in 3 months, at least this means that it really works, so this time I'm posting 604 posts and I've got so far in 2 months $15,640.00 this is really like a dream come true. So go on and try it
trust me you've got nothing to lose.... Important tip - Cover money by paper fully by which it can not been seen in light, because postal employees do some cheat some times....ok. THIS IS YOUR CHANCE. THE PLAN IS SO SIMPLE, IT'S ELEGANT. DO NOT DELAY. START RIGHT NOW! YOUR RISK IS ABOUT $6 AS I SEE IT. THIS IS A LEGIMATE BUSINESS VENTURE THAT RESULTS IN TAXABLE INCOME. BE SURE TO FOLLOW THE INSTRUCTIONS TO THE LETTER IF YOU ARE COMFORTABLE WITH BECOMING WEALTHY! GOOD LUCK.

Designer Handbag 
Rolex Replica 
Cheap handbag 
Swiss-made 
replica vuitton 
Replica Watche 
Designer Replicas 
Replica Watch Sale 
Louis Vuitton 
Fake Rolex 
Wholesale Replica 
Swiss Rolex 
Louis Vuitton Purses 
watch part 
Wholesale Louis Vuitton 
Authentic Swiss-Made 
Counterfeit Louis Vuitton 
buying watch 
Fendi Replica 
replica Submariner 
Vuitton Bag 
rolex air king 
LV Knockoffs 
rolex Day Date 
LV bags 
rolex Daytona 
replica wallet 
rolex datejust 
replica purse 
rolex explore 
vuitton wallet 
rolex milgauss 
knockoff handbags 
rolex GMT 
Burberry Handbags 
rolex sea dweller 
Burberry Wallets 
Rolex Yachtmaster 
Chanel handbag 
Swiss Replica 
Fendi Handbags 
Tag Heuer Replica 
Gucci bag 
Omega Watches 
J.P.Tods

Can you trust System Profiler? Check this out.

Looking at the system profiler i was concerned about my battery capacity so i installed Coconut battery to check it as well.
Look at this screen grab and see if you can spot the problems.
http://www.jonspeed.com/batt.jpg

Well, beyond the discrepancy in battery parameters, I'm trying to figure out how you got version 2.3 of Coconut Battery? From what I can tell by visiting both the VersionTracker page and the developer's site (http://www.coconut-flavour.com/coconutbattery/index.html), Coconut Battery is currently at version 2.2.
What's up with that?
Randall Schulz
iMac 20" Core Duo; MacBook Pro Mac OS X (10.4.5)

Battery Issue? Check this out.

Hi everyone. So, just by scanning the discussions here, there are numerous complaints about low battery life (whether it's software or hardware). Some people are getting outstanding life, and that's great, but for the rest of us, 5 hours of usage may not be enough.
In one of the other discussions, we've created an 8-hour audio test with certain criteria so that we can compare results and check for consistency. Because of the length of duration, I'd personally recommend running it overnight, and if you're interested in checking out the test, the link is here:
http://discussions.apple.com/message.jspa?messageID=9852581#9852581
If you can, please post your test results to the end of that thread (or here if you'd like). Have a great day and enjoy your phones
Message was edited by: allen099

I suppose I should have proof read before posting...oh well here's the update.
My 3G iPad has incredible battery life, here's what I've done today.
6:10am 100% battery life
6:10am - 7:05am Read email, surfed and DL'ed Dropbox and ABC (WiFi) 0.55h 94% battery left
7:05am - 9:10am Watched a movie "Shooter" 2:05h 71% battery left
9:20am - 11:26am Watched a movie "Star Trek" 2:06h 48% battery left
11:26am-11:45am Lunch (Pizza Bread, bottle-water and chips)
11:55pm - 12:15pm Read email, surfed (WiFi) 1:20h 42% battery left
12:15pm - 2:31pm Watched a movie "Sling Blade" 2:14h 19% battery left
Now writing this from my iPad....Wow, thats 7.5 hours usage and still have 19% battery life left.
Thats right I've had a free day today!!!
My goal is to run the battery completely down until it shuts off. Now it's time to watch last weeks "Lost" episode on the ABC (WiFi) app.....I'll write back later to let you know what's left on the battery.
Update:
2:35pm - 3:50pm Surfed (3G) and 11MB's 1:15h 10%
3:50pm - 4:33pm Watched "Lost" ABC app (WiFi) 0:46h 3% battery left
9 hours with 3% battery left, I think I could go another 30-45 minutes, but I'll spare you the details.
I'm happy to get 9+ hours on a single charge with the brightness at about 75-80%.

Unbelievable Mix! Check this out...

Even before I had logic, I was always infatuated with this website because of the phenominal sounds the demos generated....Now that I have professional equipent (thnx 2 logic) and a whole lot more experience, I was wondering if anyone can give some constructed criticism on the demo, in MY opinion, the overall mix is Astronomical!!! No matter how loud I turn up my monitors the sound doesn't distort, and on top of the the sound is 100% CRYSTAL CLEAR...can anyone tell me how I can acheive this mix? This is the mix i'm longing for!!!!.....I just loveeeeee Clarity please help me out...
http://www.modernbeats.com/demos/EthnicPercussion-Demo.mp3
http://www.modernbeats.com/demos/KlubKlapz1Demo.mp3

re ethno perc. it sounds good because: there is lotza space. the voice over is
placed back in the mix (voice under?) to give a sense of scale.
the melody instruments are about the same level as the vo. the bottom end percussion has a long release time giving a sense of power and scale.
but the biggest feature is the very quick "snat" in the transients of the high percussion, giving it presence, even at mp3 quality. actually i hope some of the brittleness goes away with the true recording. the bass end gets very low, so to hear it on small bookshelf type systems, try boosting the bass below 80 or so Hz.
G4 450DP Mac OS X (10.4.4) digidesign, motu, apogee

Check this out: making a copy of an array of objects

I have an array of objects called Figs of type Figure and I am making a copy of this array called OriginalFigs so later when Figs change, I can use the original values stored in OriginalFigs.
But I found out that when values in Figs change, values in OriginalFigs also change.
I tried to store values in Vector too but even in Vector values are changing.
seems like they both are storing reference to Figs and when Figs change , they(Vector and OriginalFigs) chnage too.
Is there any way to come around this problem?
if u know then plz share with me..........

Hi,
how do you copy them - if you use the method from Object(? was it there, never use this), you will get a shallow copy - that is a new object with the same references in it - not a new object with new objects of the figures in it.
How about providing a methode in your figure-objects which can do a total copy? - This must be easy as so you know how to construct such an object efficiently.
Another way to hold a copy is to write the figures out to a stream temporarily - all objects are serializable and so they can be stored to a stream - but your figures should not have references to other parts of the program in it, because the serialisation-process tries to serialize all references the object has, that is to be serialized. If there is for exampe a link to the main JFrame in it, the serialisation process tries to store your hole program to the stream and this may be impossible - I hat this with parts of a JTree that refuse to be stored to a stream.
Hope, this will help
greetings Marsian

Check this out: stable Ultra Turbo @ FSB below 218!

Similar Messages

Maybe you are looking for