Check to see if compositing is enabled?

I've got it enabled in xorg.conf but I don't know if it is ACTUALLY enabled. Is there a terminal command to see if compositing is working?

http://wiki.archlinux.org/index.php/Xcompmgr

Similar Messages

I'm trying to view a site that sends a message that I don't have the most recent graphic card drivers to view with. It suggests I have the ability to view, but that my drivers might be disable. I don't know how to check to see what graphic drivers my ma

I'm trying to view a site that sends a message that I don't have the most recent graphic card drivers to view with. It suggests I have the ability to view, but that my drivers might be disabled. I don't know how to check to see what graphic drivers my macbook (end of 2008 model) have enable. Can someone help?

You don't need to care about graphic driver on Mac OSX. It includes in OSX and run the driver your MacBook need.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions.

An alert message pops up upon opening saying could not initiate application security component, and it says to check to see if profile has no read/write restrictions. Than when it opens all of my saved passwords are gone, I use a master password and its disabled. When I try to enter in a new on e it says can't change password. I can't even open yahoo e-mail says that my ssl security is down but when I check it its clicked. I'm just very confused as to whats going on.
== This happened ==
Every time Firefox opened
== 5/14/2010 ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

See [[Could not initialize the browser security component]]
Rename (or delete) secmod.db (secmod.db.old) in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder] in case there is a problem with the file.

I am using Outlook 2010 and have a iphone 4s. In Outlook I have issues with my contacts not being the same as what I have corrected them to be. Is there a way to check and see which file Outlook is sharing with I-cloud?

I am using Outlook 2010 and I also use a Iphone 4s. I use Outlook to correct all my contacts and them it sync with my phone BUT I get different variations of the contacts. Almost as if there is another file it is going to. Can I check to see which file it is reading from??

This may be helpful.
http://itconflict.com/2012/01/08/troubleshooting-icloud-sync-with-outlook/

Unable to open document. Please check to see if you have read permission for the above file.

System:
Adobe Acrobat X Pro, 10.1.2
Windows 7 Enterprise, 32-bit
Quad Core badass CPU
4GB RAM
MS Word 2010 (Office 2010)
I installed the latest version as Administrator and am running as Administrator. I have all rights to all files on the PC.
When I attempt to create a PDF from any Word document, whether .DOC or .DOCX, I get an error window every time:
"Unable to open document:"
"[document location]"
"Please check to see if you have read permission for the above file."
This happens after the little notice pops up "Starting the application which created the document...."
If I open Word and create PDF from the ribbon, it works. It still won't allow me to create from Acrobat.
It creates PDFs from Excel files but not DOC files. I've searched for solutions but found none. I did find this from July of 2011:
"I have found out from Adobe technical support that this is a known issue with Office 2010 SP1 installed. This is an FYI for anyone else experiencing this issue, remove SP1 and it will work ok. They said an update to correct this issue will be coming within the next quarter."
I have updated to the latest version 10.1.2 and still have this problem.
This is a major issue, because it also fails on batch conversions, which is what I really need for the 100 or so documents that need to be PDFed. I'm not going to open each individual file and save each one from within Word.
This is a KNOWN ISSUE at Adobe, and if you look through the forums you'll find many people having this problem, and so far, I have not seen any solution.
If anyone has found the solution, please post it here.
Thanks!
B

I think I found a solution. It seems to be relatet to normal.dotm.
In our environment we have upgraded from XP & Office 2003 to Win7 and Office 2010. Normal.dot is stored on the users home share. When Office 2010 is started for the first time (for a user) it takes some of the old stuff from normal.dot and puts it in the new normal.dotm. When this happens, we get this error in Acrobat X.
The solution is to rename both normal.dot and notmal.dot to e.g. normal.dot.old and normal.dotm.old. Office/Word 2010 will then create a new, "clean" normal.dotm.
(By the way, if you are in a corporate environment, you might have changed the default path to normal.dot in Office group policies. You can see it here: HKEY_CURRENT_USER\Software\Policies\Microsoft\office\14.0\common\general\usertemplates)
I would be interested in knowing exactly why/what in normal.dotm caused this error. I can provide you (Adobe) with a faulty normal.dot(m), if you're interested.

I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this??

I have the iPhone 4. and when I updated the software to iOS6 My notifications don't make a sound anymore, the only sound that I get are text messages, or Email. I checked to see if the other apps were muted and they weren't. How do I fix this

You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4)

I have an iMac running OS 10.4.11. How can I check to see if I have the Flashback Trojan (and remove it, if I have it)? IMy Safari is also crashing frequently. Any suggestions?

I have an iMac running OS 10.4.11. How can I check to see if I have the Flashback Trojan (and remove it, if I have it)? IMy Safari is also crashing frequently. Any suggestions?

Hi Barry, is this an Intel iMac, or a PPC iMac?
Disable Java in your Browser settings, not JavaScript.
http://support.apple.com/kb/HT5241?viewlocale=en_US
http://support.google.com/chrome/bin/answer.py?hl=en-GB&answer=142064
http://support.mozilla.org/en-US/kb/How%20to%20turn%20off%20Java%20applets
Flashback - Detect and remove the uprising Mac OS X Trojan...
http://www.mac-and-i.net/2012/04/flashback-detect-and-remove-uprising.html
In order to avoid detection, the installer will first look for the presence of some antivirus tools and other utilities that might be present on a power user's system, which according to F-Secure include the following:
/Library/Little Snitch
/Developer/Applications/Xcode.app/Contents/MacOS/Xcode
/Applications/VirusBarrier X6.app
/Applications/iAntiVirus/iAntiVirus.app
/Applications/avast!.app
/Applications/ClamXav.app
/Applications/HTTPScoop.app
/Applications/Packet Peeper.app
If these tools are found, then the malware deletes itself in an attempt to prevent detection by those who have the means and capability to do so. Many malware programs use this behavior, as was seen in others such as the Tsunami malware bot.
http://reviews.cnet.com/8301-13727_7-57410096-263/how-to-remove-the-flashback-ma lware-from-os-x/
http://x704.net/bbs/viewtopic.php?f=8&t=5844&p=70660#p70660
The most current flashback removal instructions are F-Secure's Trojan-Downloader:OSX/Flashback.K.
https://www.securelist.com/en/blog/208193454/Flashfake_Removal_Tool_and_online_c hecking_site
More bad news...
https://www.securelist.com/en/blog/208193467/SabPub_Mac_OS_X_Backdoor_Java_Explo its_Targeted_Attacks_and_Possible_APT_link
Removal for 10.5...
http://support.apple.com/kb/DL1534

Is it normal to have to continually check to see if I am connected to the internet?

I use a MacBook Pro with system 10.7.5 and I just purchased my Airport Extreme after my Airport Express died after about 4 years of use. Yes, I do get more speed when I am on the internet, or at least it feels that I do, but I would happily trade that for a constant connection, like I had with my old Airport Express Base Station. Is it normal to have to keep checking to see if I am really connected to the internet, like the bars on my main menu show? My connection continually drops out, I can tell when I click on a link and I get no response. When I look at the main menu I see I am connected, when I Open Network Preferences, I see that the connection is still showing, but then I click on Assist Me... and choose Diagnostics, THAT'S where I am finally given an honest evaluation of my connect, which have the first 3 items lit up in green, but the next 3 items are yellow - ISP, INTERNET and SERVER. THey are somehow usually easily fixed once I check the diagnostics, but still, is it reasonable to need to do this all throughout the day? This is SO annoying, although I do hit nice stretches with a great connection. How I deal with this issue gets me by, and I am grateful for that, but I don't really consider this an upgrade by trading annoyance for speed. I rarely spent time resetting my older, earlier version of Airport. I sure do miss that older, earlier base.
Does anyone know whether this is an issue that Apple is going to fix? I ask because I have noticed that it's not only me that is going through this.

Wireless is a big bag of voodoo with gremlin chunks on the side.
The latest AC version Extreme is subject to quite a few issues and it is important to figure out where that problem is.
Let me suggest some basic tests.
1. When internet drops out, open the airport utility and find what it shows.. Is the Extreme link to the router not working?? This is a fairly common one we are finding with certain modems.. so you need to tell us exactly what modem you have and if it is working in native mode.. so a cable modem gateway working as router.. the AE should be bridged.. and you can test what is going on by connecting directly to the ISP supplied gateway by ethernet.
Post a few screenshot of the airport utility to show us what is going on.
2. If wireless is where the problem is.. reset the AE to factory and redo its setup.
When you do the setup do NOT use apple recommended names.. stick to really short names, no spaces and pure alphanumerics.
eg AEgen6 as base station name.. and let me suggest you name both bands.. AE24ghz and AE5ghz You can fix this later back to a common name but it helps to be able to force the connection to one band or the other.
3. Fix wireless channels as well.. just jump into the wireless options and change from auto to say channel 11 or 8 for 2.4ghz.. and you can also try a low channel, 36-48.. any of those..
4. If you still get dropouts.. open a terminal and ping the IP address of the AE (discover that from the airport utility).. ping the main modem if it is working as the main router.. ping your ISP or DNS server.. ping google DNS, ie 8.8.8.8 or 8.8.4.4
Then test and see if you get any improvement..Can you post the results..
I still suspect however you are using a cable pure modem which the AE doesn't like.. eg SB6121 or SB6141 are the classic problematics.
So give the full network setup.. modem is particularly vital.
A few screenshots of the AE setup from the airport utility showing the summary page.. and then click edit and show us internet and network tab will help no end.

Will someone outside of the United States check to see if a song is available in your country?

I am looking for someone located in Canada, Spain or South America who can check to see if a certain song is available on their country's itunes. If you are willing to take a couple of minutes to check for me that would be great and highly appreciated. Leave me a method to contact you.
Thanks,
Jeffrey

You should be able to switch stores but you cannot purchase without a billing address in that country.
I'm in the UK…
I can see Canada…
I'll leave the others for someone in those countries, (no habla Espanol).

Check to see if field exisits in Recordset

ASP/VB/Access
Can anyone help me out with a function that checks to see if
a field exists in a record set. I need to check it before I try and
output it on the page and cause an error. Similar to checking to
see if a field is null. The record set is being generated from a
crosstab query in Access.
Heres what I got so far
function FieldExists(rs, fldname)
Dim X
on error resume next
X= rs(fldname)
if err.number = 0 then
FieldExists = True
else
err.clear
FieldExists = False
end if
End Function
While ((Repeat1__numRows <> 0) AND (NOT rs_dates.EOF))
If FieldExists(rs_info,
rs_dates.Fields.Item("thedate").Value) Then
Response.Write(rs_info.Fields.Item(""&(rs_dates.Fields.Item("thedate").Value)&"").Value)
End If
Repeat1__index=Repeat1__index+1
Repeat1__numRows=Repeat1__numRows-1
rs_dates.MoveNext()
Wend
Thanks

Depending on what exactly you are trying to do here you probably need to do one or more of the following:
1) Use a fully qualified record set reference of queryName.column.row:
I.E.
#rs_quthorized.county_name[2]#
2) Loop over the recordset to search all the rows. <cfoutput query="..."> or <cfloop query="..."> constructs make this rather easy to do, but nothing is preventing you from using any looping mechinism you care to use.
3)Use the valueList(queryName.column) function to turn all the date from one column in the record set into a list. This combined with either a listFind() or listContains() function will allow you to quickly search for a single value.

TS3899 How do I check to see if the problem resides on the server (e.g., the mail server is not responding) rather than assuming the issue is with my phone and devise setup?

As of sometime after September 10, 2012, at 4:40PM, I have not been receiving any mail. Not on my iPhone, iPad, iMac, or MacBookPro. The trouble shooting help on Apple's web site is designed to help ensure my devise settings are accurate. However, I moved from .Mac to .me and now to .cloud and have operating with no issues for several months on the iCloud.
How can I check to see if my mail problem is really Apple's fault rather than double checking all my devise settings ad nausiam? I feel there is a server issue with Apple because none of my devises can receive mail, however, I do not know how to validate my theory with Apple. I get an error message telling me:
Cannot Get Mail
The connection to the server failed.
Apple says there is a mail server problem affecting 1% of users. However, am I one of the 1%? If I assume I am, wait for the problem to be fixed, and then learn I was not one of the 1% and continue to have mail issues, then I will be more frustrated.

I have the same problem since yesterday morning. I checked the systems status and still the same. I guess we are the 1.1% who has problem with their email.

How do I check to see if a character is NOT contained in a String?

I am trying to create a program which will read in user inputted text. If the text contains an email address, then the program will output it to screen. However, I also need to put some sort of fall back in there, in case an email address is not contained in the string.
This is the part I am having problems with. If I enter an email address, it will output it to screen. Maybe someone can help me with a "no valid mail" message.
I decided to use the '@' character as a reference point, since it is a unique character and should not be used in normal sentances. Since an email address is a continous block of text with no spaces in it,I created 2 substrings - one from '@' going backwards towards the previous space, and one from '@' going forward to the next space.
First, I tried the following:
//if(input.indexOf('@') == -1){
     // System.out.println("-no valid email-");
The program ran and when I entered text containing an email adress, it displayed it on screen. If I didn't include one, it gave me an error: java.lang.StringIndexOutOfBoundsException: -1
I'm guessing this is happening because if there is no '@' symbol in the user input, and so there is an error with the indexOf('@') statement. Any way to get around this?
Then I tried the following, bearing in mind the variable length is defined as "input.length()".
for(int i = 0; i <= length; i++){
     if(input.charAt(i) = '@'){
          break;
     if(i == length){
     System.out.println("-no valid email-");
this gives me an "unexpected type" error with the if(input.charAt(i) = '@') statement.
It says it has found a value, but requires a variable. Is the "i" in the FOR loop not a variable?
Please can anybody help me. Any suggestions appreciated.

Whenever I run the program, it is ok if I input an email address among the text. IT displays the email address to screen. However, if no email address is entered (ie. just a string of text), it displays the message "-no valid email". But it still gives me an error:
Exception in thread "main" java.lang.StringIndexOutOfBoundsException: String ind
ex out of range: -1
at java.lang.String.charAt(String.java:558)
at CA3a.main(CA3a.java:56)
Here is my code in full:
//I decided to use the '@' character as a reference point, since it is a unique character
//and should not be used in normal sentances. Since an email address is a continous block
//of text with no spaces in it,I created 2 substrings - one from '@' going
//backwards towards the previous space, and one from '@' going forward to the next space.
class CA3a{
   public static void main(String args[]){
//variable declerations
     String input;
     int indexat, length;
     String part1 = "";
     String part2 = "";
//prompt user for input
     System.out.println("This program will detect the 1st email address in a string of text.");
     System.out.println("Please enter a string of text");
//take in input into a stringbuffer
     input = Keyboard.readString();
     StringBuffer buff = new StringBuffer(input);
//assignments
     length = input.length();
     indexat = input.indexOf('@');
//check to see if '@' character is present in string
     if(indexat < 0){
        System.out.println("-no valid email-");
//check for substring part1
     for(int i = indexat; i >= 0; i--){
        if(i == 0){
          part1 = buff.substring(i, indexat);
          break;
        if(input.charAt(i-1) == ' '){
          part1 = buff.substring(i, indexat);
          break;
//check for substring part2
     for(int i = indexat; i <= length; i++){
        if(i == length){
          part2 = buff.substring(indexat, i);
          break;
        if(input.charAt(i) == ' '){
          part2 = buff.substring(indexat, i);
          break;
//output the 2 substring variables to screen.
System.out.println(part1 + part2);
}

Checking to see if a movieclip has a child

I need an if statement or the like that checks to see whether
a movie clip has a child attached to it.
I'm looking to remove an image that i loaded by using
removeChild, but i need a way of knowing if the image is there or
not, because if it's not removeChild gives me errors.
Thanks!

You have numChildren property. You can iterate trough all
children, or just check if numChildren is != 0.
Best.

TS1930 Hi All, I'm using iTunes 10.6.3.25 and i don't see the option of "Enable disk use" here so can someone kindly help me in copying the videos from my iPod Touch to my PC, Thank you.

Hi All, I'm using iTunes 10.6.3.25 and i don't see the option of "Enable disk use" here so can someone kindly help me in copying the videos from my iPod Touch to my PC, Thank you.

There is no enable disk use option for iOS Devices. See this article for instructions on copying videos and photos from your iOS device to your PC.
iOS: Importing personal photos and videos from iOS devices to your computer
B-rock

I am new to mac, but i keep reading about Mountain lion. I just bought my Mac book Pro less then a month ago. my current software is OS X 10.8.2, Do i already have mountain lion? How do I check to see?

I am new to mac, but i keep reading about Mountain lion. I just bought my Mac book Pro less then a month ago. my current software is OS X 10.8.2, Do i already have mountain lion? How do I check to see?

As the others have stated, you're on Mountain Lion with 10.8, anything. But you can check your version of the software by going to the apple in the upper left corner of the screen and clicking it and selecting "About This Mac". That will open a box that shows your software version. Once there you can click on "More Info" that will tell you everything about your specific mac configuration.
Welcome to the Mac family.

Check to see if compositing is enabled?

Similar Messages

Maybe you are looking for