Check Transport Tool error
Hi,
We are having a problem when checking the transport tool for our PRD system from the domain controller which is DEV system. Our landscape is this:
Our DEV system/server resides in one location, the QAS and PRD server resides on another location which has different network than DEV. Is that possible to configure the transport management system with that kind of landscape? And if it is okay for a transport route to be generated for the three systems?
When we check on the transport tool for PRD system from domain controller, we are getting inconsistent output. Please see attached screenshot.
Hoping for a prompt response.
Thank you!
Regards,
AJ
Hi Deepanshu,
Yes i have configured it by including PS3 and QS3 in the domain system of DEV (Domain controller) and approved it their. but when i do the distribute and activate TMS configuration, QS3 and PS3 is interrupted. Please see below error:
And i again checked the RFC connections it is all working fine.
But when i check the transport tool for PS3 it says below error:
Thank you!
Regards,
AJ
Similar Messages
-
TMS Check Transport Tool Error
Hello Experts,
We have migrated the database from Informix(DEV old machine) to Oracle(DEV New machine) and found the system up and running fine except the DBconnect failed error when i run the STMS->system overview->select the system as DEV-->R3System->check->Transport tool.
Please find the error log herewith:
developertrace,0] Logon as OPS$-user to get SAPR3's password
developertrace,0] Connecting as /@DEV on connection 0 ...
developertrace,0] >oci_logon(con_hdl=0, user='', dbname='DEV')
dbsloci.,6405] *** ERROR => CONNECT failed with sql error '1019'
developertrace,0] Try to connect with default password
developertrace,0] Connecting as SAPR3/<pwd>@DEV on connection 0 ...
developertrace,0] >oci_logon(con_hdl=0, user='SAPR3', dbname='DEV')
dbsloci.,6405] *** ERROR => CONNECT failed with sql error '12705'
We have tried almost every option given in the SAP notes but couldnt figure out the issue. We are now not able to support PRD now as the DEV is not available. Can any one quickly help me in resolving the issue...
R3 -> 45B
OS: UNIX
Kernel: 45B_EXT
We are getting no error when we run R3Trans -x and R3Trans -d as well.
Please help us in resolving the issue ASAP...
P.S: If you could give your contact number, iam ready to call you and talk to you regarding the issue and can work upon this.
Thanks and Regards,
Mani
+91 934 749 6777Hi Ruchit,
Please find the trans.log file after I run R3Trans -x herewith:
4 ETW000 [developertrace,0] New connection 0 created 20 0.034731
4 ETW000 [developertrace,0] db_con_connect (con_name=R/3) 62 0.034793
4 ETW000 [developertrace,0] Got ORACLE_HOME=/oracle/DEV/920_64 from environment
4 ETW000 89 0.034882
4 ETW000 [developertrace,0] -->oci_initialize 23 0.034905
4 ETW000 [developertrace,0] Got ORACLE_SID=DEV from environment
4 ETW000 42 0.034947
4 ETW000 [developertrace,0] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environme
nt
4 ETW000 29 0.034976
4 ETW000 [developertrace,0] Logon as OPS$-user to get SAPR3's password
4 ETW000 22 0.034998
4 ETW000 [developertrace,0] Connecting as /@DEV on connection 0 ...
4 ETW000 29 0.035027
4 ETW000 [developertrace,0] -->oci_logon(con_hdl=0, user='', dbname='DEV')
4 ETW000 31 0.035058
4 ETW000 [developertrace,0] Now I'm connected to ORACLE 62893 0.097951
4 ETW000 [developertrace,0] Got SAPR3's password from table SAPUSER
4 ETW000 1408 0.099359
4 ETW000 [developertrace,0] Disconnecting from connection 0 ...
4 ETW000 23 0.099382
4 ETW000 [developertrace,0] -->oci_logoff(con_hdl=0) 22 0.099404
4 ETW000 [developertrace,0] Now I'm disconnected from ORACLE
4 ETW000 1032 0.100436
4 ETW000 [developertrace,0] Try to connect with the password I got from OPS$-us
er
4 ETW000 25 0.100461
4 ETW000 [developertrace,0] Connecting as SAPR3/<pwd>@DEV on connection 0 ...
4 ETW000 22 0.100483
4 ETW000 [developertrace,0] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DEV')
4 ETW000 22 0.100505
4 ETW000 [developertrace,0] Now I'm connected to ORACLE 40345 0.140850
So as this is not giving any error, i dont think this is a problem with sapr3 password.
Apart from that we suspect that there is some problem with the env variable ORA_NLS33... but couldnt get to the bottom of the problem...
Please find the trace file we got when we ran tp command:
[developertrace,0] db_con_connect (con_name=R/3) 64 0.058188
[developertrace,0] Got ORACLE_HOME=/oracle/DEV/920_64 from environment
85 0.058273
[developertrace,0] -->oci_initialize 23 0.058296
[developertrace,0] Got TNS_ADMIN=/oracle/DEV/920_64/network/admin from environment
42 0.058338
[developertrace,0] Got ORACLE_SID= from environment 43 0.058381
[developertrace,0] Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
29 0.058410
[developertrace,0] Logon as OPS$-user to get SAPR3's password
21 0.058431
[developertrace,0] Connecting as /@DEV on connection 0 ...
28 0.058459
[developertrace,0] -->oci_logon(con_hdl=0, user='', dbname='DEV')
30 0.058489
[dbsloci.,6405] *** ERROR => CONNECT failed with sql error '1019'
2235 0.060724
[developertrace,0] Try to connect with default password 18 0.060742
[developertrace,0] Connecting as SAPR3/<pwd>@DEV on connection 0 ...
23 0.060765
[developertrace,0] -->oci_logon(con_hdl=0, user='SAPR3', dbname='DEV')
22 0.060787
[dbsloci.,6405] *** ERROR => CONNECT failed with sql error '12705'
60464 0.121251
[ ,597] ***LOG BY2=>sql error 12705 performing CON 48 0.121299
[ ,597] ***LOG BY0=> 17 0.121316
[tpsqlora.c,1104] end: tp_connect 13 0.121329
Any help in this way is very much appreciative.
Best Regards,
Mani -
STMS -- TRANSPORT TOOL ERROR DB CONNECT : LINK TO BD FAILED ? HELP
HAI,
i have installed a new sandbox with SAP 4.7c x200 , on windows 2003 and 64 bit kernel.
I have to apply support packages to it .
After fresh installation , i configured TMS and now when i check the tp as
STMS>OVERVIEW>SYSTEMS>SAP SYSTEM>CHECK-->TRANSPORT TOOLS , there a tree structure opens and everything is fine except the tree part tp call having DB CONNECT : LINNK TO DATABASE FAILED AND
offline call having CONNECT FAILED DUOE TO DBSL LOAD FAIL
these two comes in yellow and when i follow the detail it gives a pop up message
as below:
This is tp version 340.16.24 (release 640)
Warning: Parameter DBHOST is no longer used.
Warning: Parameter DBNAME is no longer used.
ERROR: No connect due to DbSl Load Lib Failure
ERROR: environment variable dbms_type is not set.
ERROR: Connect to UPG failed (20071102130751).
INFO: no trace information stored
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0249
standard output from tp and from tools called by tp:
So when i apply package it stops in CHECK_REQUIREMENT PHASE indicating that connection with db failed, also whe i reun to connect it is giving everything fine
help me out
regards
manuHi,
please try to set the env variable 'dbms_type=mss' globally - just to make sure that we don't get confused here by specific users. I think tp should run under the account SAPService<SID>. Lets see what happens then...
Regards,
Sven -
STMS check transport tool fails on Discovery server,
I run the TMS check transport tool option and I get an error that says
failed to read table SVERS, I also tried to run it from the command line
tp connect ERP and that fails as well. I need to install some transports.
How can I fix this, the transport directory is right, D:\usr\sap\trans.
Thanks
Update:
tp works ok, the only thing that doesn't is the TMS check transport tool. Same error message,
'failed to read table SVERS'
I don't quite understand why I am having this problem, the server came installed from the factory.
UPDATE: Is the Discovery Server based on MCOD or not? If it is then MSSQL_SCHEMA=erp is ok, if it is not shouldn't it be set to dbo? I read one of the notes that indicated so.
Message was edited by:
Adrian Bereanu
Message was edited by:
Adrian Bereanu
Message was edited by:
Adrian Bereanu
Message was edited by:
Adrian BereanuI applied note 610640 and it fixed the problem. Just be aware, the procedure ran for more than 6 hrs until I cancel it, although I think it only needs to run for a few minutes (10-15???).
-
Error in Check transport tool" DB Connect Link to database failed"
Hello Guys,
I am trying to close a request but I can't , the return this mensage :
<b>"Test call of transport control progam(TP) ended with return code 0232"</b>
when I try to check transport rout, I see the error below :
<b> DB connect Link to database failed
Offline call connect failed </b>
My Database is SQL SERVER 2000
ThanksHai....
Just i want to confirm, was STMS was configured previously,
if No, Configure it .
If yes log-in to the Domain Controller system 000 client, and execute the T-code STMS, From the menu goto Overview -> Systems
you will be displayed all your systems, by selecting one by one system execute " Update Configuration" from SAP System Menu.
Regards
KHS -
Transaction to check Transport Request error
Hi,
I raised a transport request in R/3 to transport data sources.
My basis team informed to check the imported request in QA as it is imported with error.
which transactions do i need to check for that
ThanksHi,
go to your transport request in se01 and check the import logs.
hope this helps
Olivier. -
Hello Experts,
I have problem integrating a Dev system into the production's domain controller. There is an UAT system as well. But this system can be integrated without problem. I used the exact same method to integrate Dev.
But when trying to 'accept' this into the domain, SAP system prompts me a message saying that this Dev is already in TPPARAM file.
Regardless, I continued and the Dev is shown as activated and I distributed.
When I do view this system in stms and perform 'Check Transport Tool', there Transport Profile is shown as not the domain controller's ...\sapmnt\trans but the Dev's ...\sapmnt\trans. This resulted in check failure for certain parts of this check eg. tp call could not connect to database and profile version is wrong.
What's puzzling is that the transdir parameter in the domain controller is pointing correctly to its global transport directory and dbhost,dbnames etc of the 3 systems are correct. UAT system has no problem.
So, I just like to find out how does the Check Tool get the location of the Transport Directory or Transport profile despite the tpparam and TP_DOmain_xxx.pfl already specifying correctly eg. transdir =
<domaincontrollerhost>\sapmnt\trans\
I tried overridding using Dev's instance parameter transport_exe to force point it to use <domaincontrollerhost> but to no avail.
Please enlighten. Thank you.
Regards,
MirellaDear Marcin,
Thanks! Am I right to say that by default, the DIR_TRANS is not & need not be set in instance/default/start profile explicitly as it is pointing to saptranshost?
Points awarded for your help.
Regards,
Mirella -
16: The transport tool terminated due to an internal error(transport req)
Hi friends,
i created one transport request for transporting custom appset to quality system.
while importing in quality i'm getting request in red color. checked log:
Unexpected EOF after 88079651 bytes
Ended with return code: ===> 16 <===
16: The transport tool terminated due to an internal error.
we intially transported Non BPC cubes, along with that infoarea name(/cpmb/bpc) came. But i'm able to see several /cpmb/xx infoobjects. I manually moved from infoarea(/CPMB/BPC) to other infoarea(ybpc) with new request in quality. next i'm trying to delete /cpmb/xx infoobejcts through one program(around 700 infoobjects are exists). can i use ujt_content_activate program to delete contents of appset, if i use that program what i have to mention in content version field? can anyone eloborate usage of ujs_activate_content? we are on bpc75nw sp04
any suggestions pls to import request correctly.
thanks,continution to above question. sequence of things happend in our side.
Few BW cubes(not bpc), which are getting data from bpc applications(bpc cubes) via APD are transported. Imported to quality succesfully.
Next transferred around 5 BADIs(classes & enhancement implementations) to quality system, which were written for moving data among bpc applications as well for few calculations in plng applications. Succefully imported into quality system and checked respecive BADIs.
Next trying to transport custom appset. while importing facing above problem. Followed SAP how-to guides/methods.
any suggestions pls. -
Error checking transport group configuration in System BQS
Hi Everyone,
I made a client export from Production to Quality. It went successfully,, I noted the requests numbers and transported them from PRD to Quality, but while transporting there was a tp error(which i did not note), next i went to the quality import queue and saw all the 3 requests had come. But when i click the adjust queue icon im getting the following error message "Error checking transport group configuration in System BQS" . Afterwards i tried to delete the requests from quality to retransport from production but still im not able to delete those requests from quality. Can anyone help me solve this.
Regards,
RahulHello Rahul,
regarding the error message:
"Error checking transport group configuration in system"
It's mostly related to the TMSADM RFC destination. Kindly follow the below mention steps:
1. Logon to client 000 with user DDIC.
2. STMS > System > Overview > Select the system in which you are logged in > Click on the menu says EXTRAS > Generate RFC Destinations
Perform the above steps in all the systems configure in your TMS. This should resolve the issue.
Best regards,
Tomas Black -
Transport Tool Not able to connect the DB
Hi,
When i check the Transport Tool in STMS i got this problem :
Link to database failed
This is tp version 372.04.08 (release 700, unicode enabled)
ERROR: No connect due to DbSl Load Lib Failure
ERROR: environment variable dbms_type is not set.
ERROR: Connect to S52 failed (20090729160937).
INFO: no trace information stored
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0249
standard output from tp and from tools called by tp:
connect failed due to DbSL load lib fa..set the enviroment varible based on your database software as per the link below.
[http://help.sap.com/saphelp_sm32/helpdata/EN/2b/f8993af7700577e10000000a11402f/content.htm]
Try to connect database manually using sqlplus if it is oracle. -
Requirement to check the syntax error of Customize SAP Objects in existing landscape.
Hi All,
I have two requirements which are a s follows :
1 ) Check the syntax error of customize SAP Objects in existing landscape except using the Tools which are already given by SAP( Example : Code Inspector , Extended Syntax Check etc.). I have to create a program to fulfill this requirement.
2 ) In case of SAP Upgrade is it possible to know the syntax error in advance that the existing source code will not work in the upgrade version?
Please help me out to solve my issues. Thanks in advance.Dear Abhishek,
For the code inspector, the syntax check and the extended syntax check, you can define a set of objects to be teste thru SCI:
Go to SCI
In the block 'Object Set', you can create a set. For ths, you have to give it a name, select with the icon left of the textbox if this is a global (for all users) or a local set and click the create Icon.
in the next field, you can define which objects ... are part of the object set.
When using SCII to execute the code inspector, you can specify this set instead of a transport(s) or programming objects.
To run only the syntax check and or the extend syntax check, you can specify a check variant in SCI (third screen block) which contains only those tests or you can in SCII uncheck all tests except those 2.
Regards,
Hans -
DB failed in transport tool test STMS
Hi all,
I have a problem. It looks simple but I tried to resolve it with known way without sucess.
I have two systems BWD (develop) and BWP (production).
I configured in stms domain and transport group for these systems. Auth on DIR_TRANS is set properly, variable SAPTRANSHOST is set in hosts file.
Tests in STMS of connection, transport tool and tsadm for BWD is ok. BWD is the domain controller.
When i'm testing BWP connection, tsadm are ok but transport tool return an error.
(dbms_type is not set. error code 0249.)
db is mssql.
I check env variables for user bwpadm and they disapear. I try to use ntenv2reg.exe but no variables are set.
I try to add from OS to user bwpadm all necessary variables but after restart they disapear.
Also I try to add these variables via regedit software-sap-bwp-enviroment and also after restart variables are missing.
I don't have any other idea how to do set these variables...
please help
Regards,
Michal1. Check to see you are running the right kernel, sometimes a 32 bit kernel will actually run in a 64 bit environment, but when cycling the service the registry won't get updated.
2. Make sure you are running the latest version of the kernel.
3. Worst case, remove then add the service back in, do both with sapstartsrv.exe. When adding the service back, make sure to check the box which says use the user environment variable and put in the user running the service there.
4. The user environment variable should contain all the necessary information. -
Ruler tool error 48 on XP CS5.5
Re: Ruler Tool- Error 48: File or folder does not exist
i'm getting the exact error another posted on the Mac forum but I'm using Windows XP with CS5.5
error 48: file or folder does not exist
line: 31
-> $.evalFile(g_StackScriptFolderPath + "Geometry.jsx");
Preferences have been restored to default
how do we get support for this error?
system info:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x32
Operating System: Windows XP 32-bit
Version: 5.1 Service Pack 3
System architecture: Intel CPU Family:6, Model:13, Stepping:8 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 1
Processor speed: 1729 MHz
Built-in memory: 2047 MB
Free memory: 1205 MB
Memory available to Photoshop: 1658 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 900, right: 1440
Video Card Number: 1
Video Card: ATI MOBILITY RADEON X300
Driver Version: 6.14.10.6561
Driver Date: 20050804101018.000000-000
Video Card Driver: ati2dvag.dll
Video Mode: 1440 x 900 x 4294967296 colors
Video Card Caption: ATI MOBILITY RADEON X300
Video Card Memory: 64 MB
Serial number: 92628485317819668197
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1\
Temporary file path: C:\DOCUME~1\e\LOCALS~1\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
Startup, 88.5G, 42.8G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2010/12/13-23:37:10 64.449933 64.449933
adbeape.dll Adobe APE 2011/01/17-12:03:36 64.452786 64.452786
AdobeLinguistic.dll Adobe Linguisitc Library 5.0.0
AdobeOwl.dll Adobe Owl 2010/06/03-13:43:23 3.0.93 61.433187
AdobeOwlCanvas.dll Adobe Owl Canvas 3.0.68 61.2954
AdobePDFL.dll PDFL 2010/12/13-23:37:10 64.341419 64.341419
AdobePIP.dll Adobe Product Improvement Program 5.5.0.1265
AdobeXMP.dll Adobe XMP Core 5.0 64.140949
AdobeXMPFiles.dll Adobe XMP Files 5.0 64.140949
AdobeXMPScript.dll Adobe XMP Script 5.0 64.140949
adobe_caps.dll Adobe CAPS 4,0,42,0
adobe_OOBE_Launcher.dll Adobe OOBE Launcher 2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
AFlame.dll AFlame 2011/01/10-23:33:35 64.444140 64.444140
AFlamingo.dll AFlamingo 2011/01/10-23:33:35 64.436825 64.436825
AGM.dll AGM 2010/12/13-23:37:10 64.449933 64.449933
ahclient.dll AdobeHelp Dynamic Link Library 1,6,0,20
aif_core.dll AIF 2.0 53.422628
aif_ogl.dll AIF 2.0 53.422628
amtlib.dll AMTLib 4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
amtservices.dll AMTServices 4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00) 1.000000
ARE.dll ARE 2010/12/13-23:37:10 64.449933 64.449933
asneu.dll AsnEndUser Dynamic Link Library 1, 7, 0, 1
AXE8SharedExpat.dll AXE8SharedExpat 2011/01/10-23:33:35 64.436825 64.436825
AXEDOMCore.dll AXEDOMCore 2011/01/10-23:33:35 64.436825 64.436825
Bib.dll BIB 2010/12/13-23:37:10 64.449933 64.449933
BIBUtils.dll BIBUtils 2010/12/13-23:37:10 64.449933 64.449933
boost_threads.dll DVA Product 5.0.0
cg.dll NVIDIA Cg Runtime 2.0.0015
cgGL.dll NVIDIA Cg Runtime 2.0.0015
CoolType.dll CoolType 2010/12/13-23:37:10 64.449933 64.449933
data_flow.dll AIF 2.0 53.422628
dvaadameve.dll DVA Product 5.0.0
dvacore.dll DVA Product 5.0.0
dvaui.dll DVA Product 5.0.0
ExtendScript.dll ExtendScript 2011/01/17-17:14:10 61.452840 61.452840
FileInfo.dll Adobe XMP FileInfo 5.0 64.140949
icucnv36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
icudt36.dll International Components for Unicode 2009/06/17-13:21:03 Build gtlib_main.9896
icudt42.dll International Components for Unicode 4, 2, 0, 0
icuin42.dll International Components for Unicode 4, 2, 0, 0
icuuc42.dll International Components for Unicode 4, 2, 0, 0
image_flow.dll AIF 2.0 53.422628
image_runtime.dll AIF 2.0 53.422628
JP2KLib.dll JP2KLib 2010/12/13-23:37:10 64.181312 64.181312
libeay32.dll The OpenSSL Toolkit 0.9.8g
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1263
MPS.dll MPS 2010/12/13-23:37:10 64.450375 64.450375
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.4137
msvcp71.dll Microsoft® Visual Studio .NET 7.10.3077.0
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.4137
msvcr71.dll Microsoft® Visual Studio .NET 7.10.3052.4
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.4137
onOneToolbox2.dll onOne Toolbox2 Dynamic Link Library 2.2.0
OnOneWidgets.dll OnOneWidgets dll 2.5
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS5.1 CS5.1
Plugin.dll Adobe Photoshop CS5 CS5
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (32 bit) 2.5.0.232
PSArt.dll Adobe Photoshop CS5.1 CS5.1
PSViews.dll Adobe Photoshop CS5.1 CS5.1
SCCore.dll ScCore 2011/01/17-17:14:10 61.452840 61.452840
shfolder.dll Microsoft(R) Windows (R) 2000 Operating System 5.50.4027.300
ssleay32.dll The OpenSSL Toolkit 0.9.8g
tbb.dll Threading Building Blocks 2, 1, 2009, 0201
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 2.0.0.15
WRServices.dll WRServices Thursday January 21 2010 12:13:3 Build 0.11423 0.11423
wu3d.dll U3D Writer 9.3.0.113
Installed plug-ins:
3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Accented Edges 12.0
ADM 3.11x01
Angled Strokes 12.0
Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Bas Relief 12.0
BMP 12.0.2
Camera Raw 6.4.1
Chalk & Charcoal 12.0
Charcoal 12.0
Chrome 12.0
Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Collada 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Color Halftone 12.0.2
Colored Pencil 12.0
CompuServe GIF 12.0.2
Contact Sheet II 12.0 (12.0x001)
Conté Crayon 12.0
Craquelure 12.0
Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Crop and Straighten Photos Filter 12.0.2
Crosshatch 12.0
Crystallize 12.0.2
Cutout 12.0
Dark Strokes 12.0
De-Interlace 12.0.2
Dicom 12.0
Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Diffuse Glow 12.0
Displace 12.0.2
Dry Brush 12.0
Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Embed Watermark 4.0
Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Extract 12.0 (12.0x001)
Extrude 12.0.2
FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Fibers 12.0.2
Film Grain 12.0
Filter Gallery 12.0
Fresco 12.0
Glass 12.0
Glowing Edges 12.0
Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Grain 12.0
Graphic Pen 12.0
Halftone Pattern 12.0
HDRMergeUI 12.0
Histogram 1, 0, 0, 0
HistogramCurves 1, 0, 0, 0
ICO (Windows Icon) NO VERSION
IFF Format 12.0.2
Ink Outlines 12.0
JPEG 2000 2.0
Kurtosis 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Lens Blur 12.0
Lens Correction 12.0.2
Lens Flare 12.0.2
Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Liquify 12.0.1
Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Maximum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mean 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Median 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mezzotint 12.0.2
Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Mosaic Tiles 12.0
Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Neon Glow 12.0
Note Paper 12.0
NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Ocean Ripple 12.0
OpenEXR 12.0.2
Paint Daubs 12.0
Palette Knife 12.0
Patchwork 12.0
Paths to Illustrator 12.0.2
Pattern Maker 12.0 (12.0x001)
PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Photocopy 12.0
PhotoKit 1, 2, 4, 0
PhotoKit Capture Sharpener 1.2.6
PhotoKit Capture Sharpener Expert 1.2.6
PhotoKit Color 2 2, 0, 1, 0
PhotoKit Creative Sharpener 1.2.6
PhotoKit Output Sharpener 1.2.6
PhotoKit Preview Helper 2.0
PhotomergeUI 12.0 (12.0x001)
Photoshop 3D Engine 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
PhotoTools 2.5 2.5.5
PhotoTools 2.5 Batch 2.5.5
PhotoTools 2.5 Hidden NO VERSION
PhotoTools 2.5 Hidden NO VERSION
Picture Package 12.0 (12.0x001)
Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Pinch 12.0.2
Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
PixelGenius Toolbox 2, 0, 0, 0
Plaster 12.0
Plastic Wrap 12.0
PNG 12.0.2
Pointillize 12.0.2
Polar Coordinates 12.0.2
Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Poster Edges 12.0
Radial Blur 12.0.2
Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Range 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Read Watermark 4.0
Reticulation 12.0
Ripple 12.0.2
Rough Pastels 12.0
Save for Web & Devices 12.0
ScriptingSupport 12.1
Send Video Preview to Device 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Shear 12.0.2
Skewness 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Smart Blur 12.0.2
Smudge Stick 12.0
Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Spatter 12.0
Spherize 12.0.2
Sponge 12.0
Sprayed Strokes 12.0
Stained Glass 12.0
Stamp 12.0
Standard Deviation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Sumi-e 12.0
Summation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Targa 12.0.2
Texturizer 12.0
Tiles 12.0.2
Torn Edges 12.0
Twirl 12.0.2
U3D 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Underpainting 12.0
Vanishing Point 12.0
Variance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Video Preview 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Water Paper 12.0
Watercolor 12.0
Wave 12.0.2
Wavefront|OBJ 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Web Photo Gallery 12.0 (12.0x001)
WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
Wind 12.0.2
Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
ZigZag 12.0.2
Plug-ins that failed to load: NONE
Flash:
onOne
Mini Bridge
Kuler
Access CS Live
CS Review
Installed TWAIN devices: NONEno such subdirectory: C:\Program Files\Adobe\Adobe Photoshop CS5\Presets\SCRIPTS
Message was edited by: eliz926
ANSWER: out of the box installation on an XP Dell laptop resulted in NO installation errors but a missing subdirectory - or the in-application updates removed subdirectories.
re-installing the complete application installed the missing subdirectories.
hopefully those with the same error now have something to check on with their application directory structure. there is at least one other who has this error on a Mac.
thanks to all who responded.
e
Message was edited by: eliz926 -
Custom tool error for COMexception: The report application server failed.
hi there,
i am using crystal reports for the last one year onwards, i don't get any errors till know. Yesterday when i modified some information in 40 reports. out of these reports 34 reports are successfully build, but for the remaining six reports the code is not generating.
Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"
i am not understanding why it is getting for me, Please help meHello,
Whoever wrote the CustomCodeGenerator will have to help you with this one. We know nothing about the underlying code they are using and therefore can't determine the cause.
Appears the error is it can't even load the report so there is something wrong with the workings. Open the report again in CR Designer and Verify Database and then check the changes you did. Something is not right or the DB driver their application is using does not match with what you are using.
Don -
How do I stop all of the error messages under; Tools/ error console?
Why do I get a small blank box instead of the expected information when I hover the mouse over something?Hi,
Try the following steps:
1. Check windows updates.
2. Try the Microsoft Fix it in this kb to remove previous install completely:
http://support.microsoft.com/kb/2739501/en-us
3. Reboot.
4. Try installing again.
This seems helpful on the issue.
As always, thank you for your suggestion, Don:)
Regards,
Melon Chen
TechNet Community Support
Maybe you are looking for
-
General Error Message Won't Let Me Save
Hello, I was editing an HD video earlier and I switched my audio/video settings to sequence preset DVCPRO HD - 720p24 - my capture present to DV NTSC 48 Khz (since im not capturing. i pulled files off an external hard drive - my device control preset
-
11gR2 Post-Upgrade Questions Regarding tnsnames, listener, pwd, and init
Hello. Am planning on upgrading a significant # of RHEL5 10gR2 RAC and non-RAC DBs to 11gR2 (11.2.0.3.1, specifically). The servers are still not available to me, but I have been poring on the install and upgrade documents as well as referencing seve
-
Price control cannot be changed (cost control split exist)
Hi FI Experts, When changing the price control field in material master through MM02 from "V" to "S" , the following message is displayed. "Price control cannot be changed (cost control split exist)". What should i do to avoid this? Regards, Sudarsh
-
Contacts have just disappeared
I don't know what has happened but one minute my contacts were in my address book and the next minute I go to phone someone and I have no contacts. My icloud contact sync is off, and I desperately need to know how to get my contacts back. It's happ
-
Try to change table image but system preferences won't open
Hello all. I need your help. My table image got all blue. Itried to change it but the system preferences doe not open. What should I do?