Check voided in error...need to bring back

Hello,
We voided a check in error and want to re-instate it? Is this possible?
Linda

Hi Ravi,
Thanks for your message. We would like to not create a new check number...we would like to use the original check number because it was voided by mistake and subsequently cashed.
I tried to use FCHG to change the check status of the original check, but this didn't work because I can't reset and reverse the "reversal" document that offset the payment document.
The check register still shows the original check as being voided.
Any help would be greatly appreciated.
Linda

Similar Messages

Verizon needs to bring back the games on demand

why did verizon take away the games on demand they need it back

It's possibly due to a lack of uptake or licensing, but I'll let someone from Verizon chime in officially. It looks like they've transferred control to a 3rd party per: http://games.verizon.com/do/gameList?genre=-1
========
The first to bring me 1Gbps Fiber for $30/m wins!

Green Screen - need to bring back a small portion of clothing

I shot some video against a green screen and the talent wore a green shirt under a black jacket. It is only a small portion of what she was wearing and the shirt never touches the green screen. Is there a way to only ultra key contiguous green or a way to bring her shirt back in after it is keyed out. It is only about a 30 second video and not a lot of movement.
thank you

It sounds like you did it the right way. Or, rather, the easiest, most common way.
It is possible to take the video, mess with the levels until you get all black or white, and use that as a mask. If you reduce the mask a bit you can avoid messing up any edges.
The advantage of that is that you don't have to keyframe. But that only works with some video. If there are soft edges like hair it won't work very well. But for clothing it is usually OK. Sometimes the movement is so radical that creating a mask out of the video itself can be a real time saver.

Formula Needed to bring back last Case Comment related to a Case

Post Author: angiecreese
CA Forum: Formula
I am having trouble pulling the LAST Case Comment. I created a report to show me all open cases by Account and then created a sub-report pulling in the Case Comment Date and the Case Comment. I only want it to pull in the latest Case Comment and not all of the comments per case.
Can someone please help. A tech guy offered this but I don't understand the formula he's saying to use??
u201CCreate a subreport that pulls in all the comments for the case number. Then do a filter on the MAX date or time stamp for that comment date.u201D
Any help is greatly appreciated!!

Post Author: sharonmtowler
CA Forum: Formula
in the subreport you need to retrieve the maximum date, that will show you the most recent case. there is a date stamp that you will need to create a formula from.
create a group by case id, then place the case date and comment in the details. use the summary wizard to create a MAXIMUM formula by date grouped on the case id. this will show you the last recent case date by the case id. you will have to surpress the data either by section surpression or group selection. record selection wont use a formula. make sure you join the sub report by case id.

Apple needs to bring back the month preview on IOS7 calendar.

Am I the only one who finds this a not very well thought out move? The preview is so helpful! Instead of going into each day and looking at the individual appts/events, it was so much easier to look at a month, tap a day and it would show a list of all appts/events for that day while still displaying the whole calendar. It is something small but I think it should be added back in.

http://www.apple.com/feedback/iphone

Bring back the 12 month devise installment plan.

You need to bring back the 12 month devise installment plan. I am grandfathered into the unlimited data plan and do not want to give it up, so the edge plan is out of the question. I cannot afford to pay full price for a phone and accessories. the installment plan helped me tremendously in my purchase of a new devise withOUT, changing my plan and coming greatly out of pocket. HELP!!!
I have been a VZW customer for more than 12 yrs. The devise installment plan, unlimited data plan that I have and great service, are just a few of the reasons i an still with VZW. Please remain competitive and re-offer this service.

Who cares what my data plan is? Has nothing to do with my opinion on unlimited data. I could of had it. Chose not to, didn't need it. Still don't. I use maybe 500 MB per month.
The point is Verizon wants to get rid of it. And has been getting rid of it piecemeal for years. My point is if they are going to do it, just do it. Like pulling a band-aid off. You just rip it off you don't try to finesse it. Just dumping it gets rid of all the 'How can I still get a discounted upgrade" threads also gets rid of the "Verizon tricked me into giving up unlimited data" threads.
Will people get mad? yes.They get mad now. What's the difference? Heck offer them 10 GB per line bonus for 2 years for each unlimited data line as a gesture. The ones that leave likely use the most data and that will actually help if they left.

I I have a late 2005 power PC G5 that I want to bring back to life. I need to replace the original hard drive, a Maxtor 250 GB Sata. Can I replace it with modern drives, SATA 5-6 etc?

I have a late 2005 power PC G5 that I want to bring back to life. I need to replace the original hard drive, a Maxtor 250 GB Sata. Can I replace it with modern drives, SATA 5-6 etc?

I knew I should never get rid of my old G5's. By the way, there is a browser still supported for the PPC, TenFourFox, if you're not using it already. Go to the Floodgap website (they author it) download it for free. The only thing it doesn't support is the Flash plugin, but the browser works great. Other video types are supported. It's based on Firefox, and runs most of the plugins and add-ons. It's very fast, and beats all other browsers on the browser compatibility and speed test. That's now my default on my G5's. Firefox and Safari are no longer supported. As far as the OS, both Tiger and Leopard were solid for me. The reason, as I stated before, was iMovie. The version in Tiger with iLife was far superior to what Apple changed it to. They 'dumbed it down' for the masses. Even the newest iLife 11 on my Mac Pro quad isn't is good, in my opinion. So Leopard should be fine for you. It's a much larger browser in terms of sheer megabytes and disk space, but it's fine. As far as getting an OS disc, I'm seeing Tiger for about $45.00, Leopard for $50 - 60.00 on that famous auction site. As far as RAM, I have 8GB in my G5 2.3, but you should check Activity Monitor when you are running your apps. See how much green slice you have left (unused RAM). You might find you don't need eight. A Mac Pro will grab more free RAM than a PPC machine will. I have a hard time maxing out use of my 8 on the PPC. Not true with the eight on my Mac Pro. The OS doesn't hesitate to grab and use it. You might be OK with 6GB on your PPC. More will not make you faster, as long as you still have free RAM available. As far as backup on your resurrected machine: look for a firewire enabled backup if can. Use CCC (Carbon Copy Cloner) and make a clone backup. Next time your PPC machine wipes out the hard drive, just take your Firewire drive and plug it into another PPC machine, and you can select it as your boot drive. You'll be back and running in five minutes. You can also take the physical drive out of your enclosure, and put it in your tower to replace the failed drive, and you'll be back to where you were in less than ten minutes, OS and all. The PowerMac has an 800 port, so you can do the 800 on the machine to an 800 port on your backup. A firewire 800 to 800 cable is only about $8.00. It runs nice and fast through the 800 port. I like the OWC Mercury Extreme enclosures. They use USB, Firewire 800, and eSATA, so all your options are open.

Hello I'd like to know how to walk redo my iMessage on my ipod touch 4th . I connect and then says to choose an email address and it says Check and this is the me that his brings back on the menu. So please help me

Hello I'd like to know how to walk redo my iMessage on my ipod touch 4th . I connect and then says to choose an email address and it says < Check> and this is the me that his brings back on the menu. So please help me!

You can try
FaceTime, Game Center, Messages: Troubleshooting sign in issues
However, some other users have reported that did not work. No real solution has been posted here yet

Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?

Hi,This morning I wanted to call, so I took my phone ( Iphone 4 S) ,but my All contacts list was empty! I checked in my computer ( windows 8) I have them in Iclould. How can I bring back my data?

Hello Noushin,
It sounds like you are unable to see your contacts in the phone, but have confirmed they are still at http://www.icloud.com. I would next try these troubleshooting steps from the article named:
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
If you're using iOS 7, quit and restart the Contacts app on your iOS device:
Press the Home button twice to see preview screens of the apps you have open.
Find the Contacts preview screen and swipe it up and out of preview to quit the application.
Tap the Home button to return to your Home screen.
Wait a minute before reopening the Contacts app.
Turn iCloud Contacts off and back on:
Tap Settings > iCloud.
Turn Contacts off. Choose to delete data only if your data exists at icloud.com/contacts and on one or more of your devices. Otherwise, choose Keep Data.
Wait a few minutes before turning Contacts back on.
Restart your iOS device by holding down the Sleep/Wake button and then swiping the screen when prompted to power off. Then turn your device back on. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Thank you for using Apple Support Communities.
Regards,
Sterling

Bring back Visual Basic 6.0 ! We all need it.

Please reconsider introducing VB6 to the market. It is needed by many.

Hi Reed,
Thanks for your two posts. Let me try to reply.
Discussion or Argument ?
You say "these forums are for discussions not arguments", and suggest that I want an "argument" or I am "trolling".
Yes they are for discussions and no it isn't the case that I want an argument (or that I am trolling). I am trying to have a reasoned discussion following the opening poster's genuine request to "Please reconsider introducing VB6 to the market. It is needed
by many."
I don't consider you treated him fairly. You have some sort of administrative status on this forum, implicit in that is that you should treat all posters equally and fairly. Yet your first post was "Bring back Windows 3.11, we need it. ......VB6 should
be retired and forgotten." That post alone was unfair to the OP and it set the tone for other posts that followed.
In other posts you refer to "VB6 zealots" but never criticize those who oppose the return of VB6 even when they accuse posters of being someone else. (I'm not making a plea for more banning and more censorship, I'm asking that everyone be treated
equally).
You also say "At the end of the day it is a fool's errand to argue with fools, so there's little sense to continuing the 'discussion'". Hardly fair and equal treatment, and certainly not an encouragement of discussion rather than argument.
You also state "If this thread were meant to take itself seriously, it would have a title which was not so obviously false, and it would contain some content with a reasonable argument." Again, the opening post was clearly a genuine call. You may
not agree with it but that is no reason to call it 'obviously false'.
Also the opening post doesn't even refer to VB.NET, it certainly doesn't suggest that VB6 should replace VB.NET - it is others who bring VB.NET into the argument. (And yet you move it to 'Off-topic posts' on the grounds it is not VB.Net related).
Let me state I am putting this forward as my genuine opinion of your actions, I am not attempting to 'troll', 'flame' or to attack you personally.
Valid arguments for VB6
You say Cor has clearly demonstrated there are no valid arguments for keeping VB6 around. Not so.
First of all the OP says "it is needed by many". Why should your and Cor's opinion be any more important than the OP's ?
Here are some reasons it is needed (I limit myself to just 5 otherwise this post will be huge):
1) VB6 is still widely used. According to the TIOBE index it is the #7 most popular programming language - an amazing feat for a language last updated 16 years ago. Particularly as Microsoft (& others) have spent 12 years trying to kill
it off. You may not like it, but there it is.
2) There are still a huge number of legacy VB6 applications in use, especially in corporates and government. Microsoft have (to their credit) recognized this and offer "it just works" support for the VB6 runtime until at least 2023 (soon to be extended).
But this support is for the runtime, not the IDE.
Microsoft effectively offer 2 options for these VB6 applications
a) If no modifications are required, continue running the VB6 application (presumably Cor disagrees with Microsoft).
b) If modifications are needed, migrate to VB.NET.
But in real life the most likely scenario is that the VB6 application will require a minor modification.
So what do you do ? According to Microsoft you migrate. But if the modification is just to change (for example) some text on a form that would be nonsense. I saw a suggestion a while ago that it cost $1 for every 3 lines of code migrated. So
a medium sized VB6 application could cost say $20,000 to migrate. Clearly that is not an acceptable cost for the minor modification I suggested. (Don't get hung up on actual cost figures, I am just pointing out there are potentially significant
costs involved).
The obvious answer for this scenario is to use VB6 (at a cost of say $20 not $20,000). Yet Microsoft don't offer this, stating that the VB6 IDE is not supported on Windows 7 or 8.
Does anyone disagree that doing minor modifications in VB6 is the only acceptable solution in this scenario? Or are some going to suggest it is better to spend $20,000 than $20 ?
Microsoft have painted themselves into a bit of a corner here, stating that they support unmodified VB6 applications until 2023, but you can't (theoretically) modify them.
For completeness on this point I'll cover some other typical scenarios too:-
One is that the VB6 program needs to become a web application - effectively this is then a re-write not a migrate, so you can decide what language is best to use. It may be, for example, that JavaScript/HTML5 is the way to go. (I've followed this route myself
for some old VB6 apps).
Another is that the VB6 application needs a mobile version. A few years ago that may have been VB.NET for Windows Mobile. (I've done that myself too, great for Windows CE/Windows Mobile 6.x). But doing this today you are really looking at iPhone,iPad
and Android - again you can choose the best approach (native or web app ?) and language.
The final scenario I'll mention is the one Microsoft do cover - migrate your desktop VB6 app to desktop VB.NET. I can't think of any occasion in the last few years where I have found a genuine need to do this. I have certainly seen cases where
IT (or whoever) have decided that VB6 apps must be migrated because VB6 is 'obsolete' (I guess a view not too dissimilar from many in this forum). I've even done a few of these myself (though I had the sense to only do smaller migrations, not wanting
to tie myself up with large scale migrations). I don't think of any of these new applications (done by myself or others) were any better than the ones they replaced, but at least the customers were happy (and paid well).
3) VB6 is the same language as VBA. VBA is a current, Microsoft supported language. It is in Microsoft's flagship product Office 2013. And it is the same language as VB6. You can cut and paste code between VB6 and VBA (and vice-versa). It is the same
language.
Both VB6 and VBA use the Visual Basic Runtime Library. In fact it is more than that, VB6 actually uses VBA to define it's language. In effect the VB6 IDE is a host for VBA in the same way that Word or Excel are hosts.
It is strange that Microsoft support (and sell and extend) the language when it is named VBA but not when it is named VB6.
Microsoft say VBA will be supported for the foreseeable future stating "This means that if you have an existing VBA project that you are satisfied with, you can be confident your investment is safe". Where is the logic in having this for VBA but not VB6
They assure you your VBA investment is safe but won't give the same assurance for your VB6 investment.
(OK, for the more pedantic posters VB6 is the same as VBA6. VBA7 is the latest release and includes a handful of modifications to support 64 bit Windows. Prior to VBA7 the languages were kept identical, it is these same modifications that many
of us now would like to have incorporated into an updated VB6).
4) A suggestion to bring back an improved version of VB6 is the fifth most popular (out of almost 8,000) on the Visual Studio UserVoice site. Vote
for VB6
5) Microsoft's program manager for Visual Studio stated (Channel 9) "It isn't cost effective to keep rewriting code to get back to functional equivalence". Quite so. So why re-write existing VB6 applications ? (Again, Cor presumably disagrees).
General Points
You mention LightSwitch and SmallBasic. A good point. But I'm sure you know neither support VB6 code so it doesn't address the concerns of the OP. But it is nice to see that you aren't opposed to all languages that aren't called 'VB.NET'.
So why the opposition to an updated VB6 ? If you prefer, it could be named LightSwitch 6.1 rather than VB6.1 ? Or maybe SmallBasic 7.0 ? Or if you see VB6 as a threat to VB.NET you could name it VB Junior. As long as it can open and compile VB6
code that's fine by me. Incidentally, there is certainly no call for VB6.1 to be part of "the .Net family".
You say "you want these hard working people to DO MORE WORK so that you can continue to generate income from your ancient endeavors." I'm not sure I see your point here. How is asking for Microsoft to bring back VB6 (together with the modifications
they have already done for VBA7) doing that? I suspect Microsoft could do this for a fraction of the money they have wasted on LightSwitch or SmallBasic. And if it is going to be more work than Microsoft can handle (as if) they should open source
VB6.
You mention that your 8 year old website is 'crap'. Well, that's what happens with websites. But the analogy doesn't really hold for a typical VB6 desktop program. A desktop CRUD program written in VB.NET doesn't really look (or behave) any different
to the same program in VB6.
You ask what I will be doing in 5 years when nobody uses PCs anymore ? Well who knows what the future will bring, but it is likely to be VB6 for those (mainly corporate) users still using desktops and laptops or Windows tablets, JavaScript for
Web apps - including iOS and Android - (I note Microsoft are recommending JavaScript/HTML5), and something (maybe Basic4Android ?) for native Android apps if Android phones and tablets become more acceptable for corporate users. I'll probably
also be migrating my VB.NET apps to JavaScript too.
As things stand, Microsoft have sent a clear message: 'If you are planning to make a substantial investment in developing your software, if your application is mission-critical, if you expect to use it for years to come - don't use Microsoft languages.'
Have Microsoft learnt from this ? The killing of Silverlight would suggest not.

Today I restore my phone, before I restored it I checked that my photos are saved on my icould, I did the backup and everything was back on my phone but not my photos! :( please help I need my photos back :|

today I restore my phone, before I restored it I checked that my photos are saved on my icould, I did the backup and everything was back on my phone but not my photos! please help I need my photos back :|

Hello purpleroses68
To download any photos that were on your My Photos Stream, then you will need to have Photo Streamed turned on within your computer. Keep in mind that My Photos Stream only holds the last 30 days of photos and those will be the only one that will download. Check out the articles below for more information for the process and general information about getting your photos downloaded.
Archive or make copies of your iCloud data
http://support.apple.com/kb/ht4910
iCloud: My Photo Stream FAQ
http://support.apple.com/kb/ht4486
Regards,
-Norm G.

Getting an error message "itunes cannot read the contents of the iphone" ever since I used Sharepod. Do I need to restore back to factory settings?

Getting an error message "itunes cannot read the contents of the iphone" ever since I used Sharepod. Do I need to restore back to factory s

Did you every get a fix on this?
Thanks

Will they bring back camara roll? This is the ownly thing the IOS8 software needs to sort out

Bring back camara roll!

Hi lindab63,
Welcome to the community!
I'm sorry for the problems you're having with your broadband speed and for the time this is taking to sort out. I can help you from here. To get in touch, click on the "about me" section of my profile where you'll see the link to "contact the mods".
Thanks a million,
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

How to get .oce to talk to DAS & bring back data in Interactive Reporting?

Hi Hyperion Experts,
This is also a fairly basic question, I use Hyperion 9.3.1 and I have Shared Services, Workspace and Interactive Reporting Studio running on our Windows 2003 Server.
My goal is to import a .bqy document I created in Interactive Reporting Studio into workspace, and be able to click on the "refresh" button and see it refreshes the data from the backend Oracle 10g database.
I have completed the following steps so far,
1. I have created a DSN. This DSN, named "Oracle 10g Data Source", when I clicked on "Test Connection" button, It ran successfully.
2. I have created a new Datasource entry in the DAS service. If I double click on the newly created Datasource entry, the screen would display the following details.
Connectivity Type = Oracle Net
Database Type = Oracle
Enter the name of the Data source = Oracle 10g Data Source
Select the name of the Data source (it is grayed out, nothing selected)
Server/File (it is grayed out, nothing entered)
then, followed by some default connection parameters.
3. I have created a "Oracle 10g Data Source.oce" file using the Interactive Reporting Studio. I saved the .oce file at
C:\Hyperion\BIPlus\data\Open Catalog Extensions\Oracle 10g Data Source.oce
4. I created a new constrProj_Oracle10gOCE.bqy, during the creation, I chose
"Create a new document with Recent Database Connection File" option, then I chose the Oracle 10g Data Source.oce that I have created in step 3. After I log in with host user/password, I have created a data model and I see that it brings back a data set when I clicked on the "process" button. I saved this .bqy document.
5.
I imported the Oracle 10g Data Source.oce and constrProj_Oracle10gOCE.bqy into the workspace under a folder called
Root/MYBI/Test
6. I right click on the constrProj_Oracle10gOCE.bqy document, and chose "Open". It opened with Results section highlighted on the left hand side, and with data showing on the right hand side. However, when I clicked on the "refresh" button, I'd get a message box with a red X. It says,
An Interactive Reporting Service error has occurred -
Failed to acquire requested service.
(2001)
I guess the data I see in this constrProj_Oracle10gOCE.bqy was just the cached data that was brought back when I hit the process button of this .bqy when it was first created in the Studio, and that it never established any connection via the DAS service to the backend.
Could someone please show me what I have done wrong here?
thanks,
hypuser1010

EricaHarris,
Yes, the issue is still open. Obviously, I have gone down the path of "Scenario One".
Based on your reply, I have done the following.
There are three things I am configuring here: DSN, DAS and OCE.
1) When I created the DSN,
I started the ODBC Data Source Administrator, Click on second tab "System DSN". I added a new ODBC Data Source.
Data Source Name = Oracle 10g Data Source
TNS Service Name = //146-abc.xyz.com:1521/MYORCL0617
2) I re-created the DAS entry, per your suggestion, I made sure that "the name of the data source will be the host name you specified in your OCE".
Connectivity Type = Oracle Net
Database Type = Oracle
Enter the name of the data source= //146-abc.xyz.com:1521/MYORCL0617
3) for my OCE, I specified
Connection Software = Oracle Net
type of Database = Oracle
on the first screen.
then, on the next screen, I specified
Host = //146-abc.xyz.com:1521/MYORCL0617
I reployed the OCE, the .bqy document and restarted DAS. Yes, my .bqy document does refresh its data successfully from the backend.
However, I am not 100% convinced that the .bqy uses the OCE which talks to the DAS, which talks to the DSN entry and brings data back to the .bqy document.
Here is what I did,
I opened up the DSN entry, changed the TNS Service Name from //146-abc.xyz.com:1521/MYORCL0617 to
//146-abc.xyz.com:1521/NONSENSE. I then restarted DAS and redeployed the .bqy document. the .bqy document is still able to refresh its data. So, I have just proven that the .bqy document does not need a valid DSN entry to work, how come??
Can you (or anyone) please explain the phenomenon that I see?
Also, a very basic question. you know that when you create a .bqy in the Studio, you "import" an OCE into the .bqy document so that the .bqy knows that it should use this OCE to talk to the backend data source. but, when you deploy this .bqy in workspace, how does the .bqy know that it is supposed to go through DAS (and DSN) to interact with the database, rather than the "internal" OCE that was pre-built with this .bqy?
thanks,
hypuser1010

Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274: TRexUtils/ParallelDispatcher.cpp:275 message not found; $message$=

Hello Gurus,
I have a couple of calculation views in HANA and each of them has text fields (like Employee Name, Country Name etc.).
As part of my project requirement, I have join those two views and get all the fields that exist in them.
When I am doing so, I am getting a weird error as shown below.
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274: exception 141000274:
TRexUtils/ParallelDispatcher.cpp:275
message not found; $message$='TSR HTKD JFSDFM'
Please check lines: 59,
Upon, researching further, I could see that the value 'TSR HTKD JFSDFM' is the value in text field of Employee Name.
I did try to increase the length of the field and change the data types but nothing has worked.
Could you please help me in getting this one resolved.
Thanks,
Raviteja

Hi,
I am exactly facing the same issue:
Error: [129]: transaction rolled back by an internal error: [129] transaction rolled back by an internal error: exception 141000274:
But i found a fix :-) .....
This may be a very late reply but it would help people who desperately searching for an answer for this issue.
I used CAST function .. The problem is, we are selecting data from table and of course we dont know the size of the data (attribute) @ runtime. We assign the length by looking at the table attr length or view op attr length. But what happens is the junk data which exceeds the limit of the allocated space hence we get this error.
So i used CAST function to truncate the excess junk values (may be spaces).
Example:
I have a ATTR view of date in the format YYYY-MM-DD which means 10 char size.
In my CALC view I have created date OP column of VARCHAR(10) but I get the above error for no reason. Eventhoug i am 100% sure about my ATTR date would be max of 10 char my CALC view is failing @ runtime.
So i did a CAST on date as CAST(my_date as varchar(10)) and the magic happend. It works .......
But you need to be careful in using this because if you use CAST you may lose data. Careful. In my case i dont.
Somebody from HANA team should look at this issue from SAP and solve this. I am sure it is a serious bug from HANA (eventhough i am using SAP HANA SP09 Rev 92 the most latest as of today !!!!!!!!!! )
Enjoy....
Thanks & Regards
Prakash K

Check voided in error...need to bring back

Similar Messages

Maybe you are looking for