Check what patch appiled in my sap

HI All ,
I am new for sap . I was asked to checked version , what patch appiled in sap ..etc before do archiving program .
Can any tell me ?
Thanks
Felix

Hi,
one method is already suggested by Mr. Maheshwer.
If you want to know wich support package applied on which date/time do following.
login into sap system client 000.
Run tcode SPAM
under directory select imported support package. click on display
you will get support package applied by date/time.
now to identify kernel patch level,
after login from System menu -> Status -> other kernel info.( Shift + F5)
you will get kernel information.
regards,
kaushal

Similar Messages

Patch needed for uploading sap ecc 6.0 country india version

Hello experts,We are facing problems whileworking with the cin module,First of all i would like to convey that our server is based at jakarta and that the license is based at jakarta(indonasia),however the off shore delivery centre is based at india,so please guide us like what patches are needed to be uploaded so that we can operate the cin version.
Functional error----- The error or problem been faced by the functional consultants is that while entering the FTXP tranction the respective fields are always in the display mode and not allowing to enter any data(only single session been opened and not the case of multiple session in the same tranction),
pls guide,thanks in advance,
Anshuman.

Thanks guys for your replies.
Uday,
Is there any Authorization object that will let me download ECC IDES?. I dont see any such object ( named ECC or similar) assigned to my SID in Serv Mkt Place.
Could that be the reason?. Pls advise.
JD
>
uday kumar wrote:
> Hi
>
>
All corrective software packages, for SAP NetWeaver 7.0 and SAP Business Suite 2005 and beyond that are delivered after April 2nd, 2007 will ONLY be available via SAP Solution Manager's Maintenance Optimizer. Find more details here
> Its applies for only support packs and SP stacks you can download Software packaged irrespective of solution mangaer directly
>
>
Sorry if its a repeat question. I need ur help. I was trying to download SAP ECC 6.0 IDES from SAP service market place. I identified all the files needed for ECC 6.0 IDES version installation, added them to download basket, though they wont show up there
> R u sure that you have added them to download basket,do you have proper authorization to download them to download manager,cross check the setting of download manager and your S userid and password.
>
>
I have Serv Mkt place ID and is there anything else that I need to install first to be able to download IDES files?.
> Did you configure downlaod manager at your desktop or forntend server?
>
> Regards
> Uday

What is the diffrence between sap events and application events

Hi all,
what is the diffrence between sap events and application events.Can any one tell me with examples.
regards,

Hi,
Look at this,
<b>System Events (Default)</b>
The event is passed to the application server, but does not trigger the PAI. If you have registered an event handler method in your ABAP program for the event (using the SET HANDLER statement), this method is executed on the application server.
Within the event handler method, you can use the static method SET_NEW_OK_CODE of the global class CL_GUI_CFW to set a function code and trigger the PAI event yourself. After the PAI has been processed, the PBO event of the next screen is triggered.
The advantage of using this technique is that the event handler method is executed automatically and there are no conflicts with the automatic input checks associated with the screen. The disadvantage is that the contents of the screen fields are not transported to the program, which means that obsolete values could appear on the next screen. You can work around this by using the SET_NEW_OK_CODE method to trigger field transport and the PAI event after the event handler has finished.
<b>Application Events</b>
The event is passed to the application server, and triggers the PAI. The function code that you pass contains an internal identifier. You do not have to evaluate this in your ABAP program. Instead, if you want to handle the event, you must include a method call in a PAI dialog module for the static method DISPATCH of the global class CL_GUI_CFW. If you have defined an event handler method in your ABAP program for the event (using the SET HANDLER statement), the DISPATCH method calls it. After the event handler has been processed, control returns to the PAI event after the DISPATCH statement and PAI processing continues.
The advantage of this is that you can specify yourself the point at which the event is handled, and the contents of the screen fields are transported to the application server beforehand. The disadvantage is that this kind of event handling can lead to conflicts with the automatic input checks on the screen, causing events to be lost.
Hope u understood.
Thanks&Regards,
Ruthra.R

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

What's is new in Sap Portal 7.1?

What's is new in Sap Portal 7.1? are new features?

Hello Ws6kid
Welcome to Apple Support Communities
The Mid 2007 iMac 7,1 takes DDR2 SDRAM 667MHz PC2-5300 modules.
see > http://support.apple.com/kb/HT1423
For quality tested RAM with a lifetime warranty, check out OWC
see > http://eshop.macsales.com/shop/apple/memory/iMac/IntelCore_2Duo
I went what a WD Caviar Blue in my Intel iMac, it runs cooler and quieter that the factory Seagate Barracuda ever did. see > http://www.wdc.com/en/products/index.asp?cat=3
Bad news on the Graphic chips in most iMac's though, there soldered in on the logic boards.
Dennis

What report is run in SAP to get the DATE on which Users are locked ?

Hello,
What report is run in SAP to get the DATE on which Users are locked ?
I have tried with RSUSR200 ,-- last logon ,last password change , but i did not get a option to find the date on which are Users are locked .
Can anyone suggest what report should be executed to get the date on which Users are locked and by whom ?
As a alternate , i am usig SUIM to get extract this data but i am looking for a report .
thanks & regards
Ganesh

Hi Ganesh,
You can try the below link where many of the options are described:
How i can check at what date perticular user was locked and who lock it?
Regards,
Nilanjan

What is Report category in SAP-HR Reports ?

Hi SAP-HR Experts .
Dear Friends tell me about
What is Report category in SAP-HR Reports ?
How to create it ?
Can we set authorizations for a Repots , if Yes the how can we set it .?
Please elaborate your replies with examples .
Best Regards to ALL .
Rajneesh .

Report Category are used in reports with an LDB, usually PNP. Basically it's the configuration for the selection screen when the report is called. Among the choices you have which fields should appear on the first page, if sorting is allowed, etc, all sort of configuration.
How to see.
You can take one example, for example RPCALP0 (portuguese version, just substitute P0 with the version you use). Go to transaction SE38 and exhibit the report. Then yoy must select GOTO-->ATTRIBUTES and on the bottom tray there is a button that reads "HR report category". Just click that and on the next popup click Report Category again. So you have an example there of report category __M00001.
To create it's the same way, when you EDIT a report and click on report category the next popup has a create button.
The second question about authorization, it's quite simple, you can either use standard objects of authorization (like P_ORG for example), or your own Z objects. The sintax in ABAP is :
    AUTHORITY-CHECK OBJECT 'Z_AREA_SUB'
             ID 'PERSA' FIELD w_werks
             ID 'BTRTL' FIELD w_btrtl.
    if sy-subrc <> 0.
      CONTINUE.
    endif.
This is an example for a Z object to read authorization for WERKS and BTRTL of an employee.

What is the differenec between 'sap list viewer' and 'abap list viewer'

hi
what is the differenec between 'sap list viewer' and 'abap list viewer'

Hi,
There is no difference between them.SAP List Viewer (ALV) is the new name of the ABAP List Viewer (ALV).
The SAP List Viewer unifies and simplifies the use of lists in the R/3 System. A uniform user interface and list format is available for all lists. This prevents redundant functions.
The SAP List Viewer can be used to view both single-level lists and multilevel sequential lists.
Single-level lists contain any number of lines that have no hierarchical relationship to each other.
Multilevel sequential lists consist of any number of lines that have two hierarchical levels. Multilevel lists have header rows and item rows; the item rows are subordinate to the header rows. For each header row there can be any number of subordinate item rows.
You can view subtotals and totals rows in both single-level lists and multilevel sequential lists
From End User Point it is SAP LIST viewer , From Developer Point of View it is ALV .
Check the Below Link
http://help.sap.com/saphelp_nw04/helpdata/en/66/bc7aab43c211d182b30000e829fbfe/frameset.htm
Regards,
Satish

What is commitment item in sap ps, why do we use it , plz explain...thankx in advance

what is commitment item in sap ps, why do we use it , plz explain...thankx in advance

Hi
Commitment item is a term used in FM module.
It is by the way of Commitment item cost is posted and budget check is occurred in FM (Fund centers)
Google it to understand it in detail.
Regards
Saurabh

What is BC SET in SAP BASIS related to SAP Security.....................

Hi All,
Please explain me what is BC SET in SAP Basis which is related to SAP Security.
Can anyone explain in detail...
Thanks Much.
Swapna.D

Hi
Prerequisites
You want to create a BC Set from a transport request. A transport request containing Customizing data must already exist.
This Customizing request is a change request with which you can copy and transport the changed system settings.
The BC Set is based on the data in the Customizing request. You can copy all the data records in the Customizing request into the BC Set, or select a subset.
You can subsequently edit BC Sets created from transport requests.
Procedure
Enter the Customizing request number and Continue.
You can search for requests with the F4 help. The request type is Workbench/Customizing requests. The request status is changeable or released.
You get an overview of the transport objects in the transport request. To put a transport object in the BC Set, flag the row Copy.
The Status column tells you the BC Set-compatibility of the transport object. It can have the following values:
·        green traffic light: The transport object can be put in the BC Set.
·        yellow traffic light: BC Set creation or activation problems are possible. Check whether all data records have been put in the BC Set, after you create it.
·        red traffic light: Table entries exist, but they cannot be interpreted. They cannot be put in the BC Set.
·        Cancel: The transport object cannot be interpreted or put in the BC Set.

Check Box With Tick Mark on Sap Script

Hello All,
We need to add a check box with tick mark on Sap Script.Please can anyone let me know how can we add it.
Regards
Amruta

hi amruta,
The soluti as an image into on to your problem can be to use the symbol icon as told , but this may show in preview not in print.
I too faced the same problem.
So what i had done is created a new window with the diemnsions of the chekc box with border thcikness 8 tw and inside that window place a checkmark symbol.
if this checkmark symbol also does not show up in print preview/ doesshow in print preview and not in print then you can scan a chekcmark image and upload it into business document server as a BMP/ TIFF image and use this image in your checkbox window.
Hope this solves your problem.
Warm Regards
Venugopal.T

What is the diffrence between SAP View and CAD View ?

What is the diffrence between SAP View and CAD View ?
What is the main purpose of SAP View
and
What is the main purpose of CAD View
On SAP help i found
SAP View is used for :The SAP view displays the SAP structure (document-based structure) for the active CAD object, or another document info record (header document), with a single-level or multilevel document structure in a tree structure. You can variably configure the fields using the layout editor.
CAD View is used for :The CAD view displays the document-based structure of the currently active CAD object, such as the structure of an assembly. The CAD system determines the complete (multilevel) structure and copies it either completely or in stages to the SAP system, in accordance with the default explosion level.
BUT I did not understand it well
Can someone explain this with an example
THanks
Raj

Hello Raj,
SAP View can be further described as the view that is based on what is existing already in the SAP system. This view is generally used by SAP purchasing, MM people etc
CAD view is nothing but the replication of the model tree view in the SAP system. This is used by the design engineer and this view replicates only the parts that are actively displayed on the CAD tool window.
hope this helps. Let me know if you have further questions else please close the message.
regards
N K

Is there a way to check what I had purchased from the itune store to match the charges on my credit card, because there is a charge that I do not recognize

Is there a way to check what I had purchased from the itune store to match the charges on my credit card, because there is a charge that I do not recognize

http://support.apple.com/kb/HT2727
Regards.

I think my ex has access to my Icloud, how can I check what devices has access to my Icloud?

I think my ex boyfirend has access to my Icloud and has his iphone connected to my Imessages. How can I check what devices are all on my ID?

YOu can try siging into icloud.com
But you should just change your icloud password.

What is the difference in SAP CRM and SAP R/3

Hi Experts,
I am new to the CRMs system. Please clarify the following points.
what is the difference between SAP CRM system and SAP R/3?
In SAP R/3 contains the different module like SD , FI, MM, HR... Like that in SAP CRM also have different modules.?
How diffrent SAP CRM from SAP R/3?..
How to know the Basics of the CRM?
The ABAPers which are doing the coding in SAP R/3 is ok to for doing the coding in SAP CRM also. or any difference is there?
Please clarify
Regards

Hi
SAP R/3 is the core ERP package software with various modules integrated like SD,MM,PP,FICO to automate the business process in the organisations and companies and to increase the productivity by automating the manual processes and SAP CRM is New dimentional module of SAP to focus on the Customer relations and customer centric information from all angels at 360 degrees for marketing sales and service areas with different channels like internet sales interaction center and field sales (mobile sales)
Refer to the link below for CRM
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
http://help.sap.com/bp_crmv250/CRM_DE/index.htm
Reward points if helpful
Dinaker vikas

Check what patch appiled in my sap

Similar Messages

Maybe you are looking for