Check whether the port 21212 is already in use.

hello ,I am facing the following error "check whether the port 21212 is already in use." i tried to logon using local hostcomputer name and port21212.
could anybody help me in installing NW04 SR1.
Thanks & Regards,
Gopi

Hello Arun, your solution worked in that aspect and now after that i have got new error in next step by name
"connection to SAPinst broken.Reason:Network I/O exception:No buffer space available(maximum connections reached):recv failed java.net.SocketException:No buffer space available. Plese correct the error condition and restart the installation".
Is there any solution for this error?I am using Oracle.
Thanks & Regards,
Gopi.

Similar Messages

How to check Whether the File is in Progress or used by some other resource

Hi All,
I am retrieving a file from the FTP server using Apache commons FTP.
I need to check whether the file is fully retrieved or in progress.
for now i can able to use the file which is partially retrieved. it is not throwing any file sharing exception or i am unable to find whether it is in progress.
How to check whether the file is in progress ? or The file is accessed by some other resource ?
Pls Help me.
Thanks,
J.Kathir

Hi Vamsi,
Explicitly such kind of requirement has not been catered and i dont think you would face a problem because any application that is writing to a file will open the file in the read only mode to any other simultaneous applications so i think your concerns although valid are already taken care off .
In the remote case you still face a problem then as a work around. Tell the FTP administrator to set the property to maximum connections that can be made to ftp as one. I wonder if you have heard of the concept of FTP handle , basically the above workaround is based on that concept itself. This way only one application will be able to write.
The file adapter will wait for its turn and then write the files.
Regards
joel
Edited by: joel trinidade on Jun 26, 2009 11:06 AM

Sapinst.exe giving error while starting 'port 21213 is already in use'

Hi
when we start the sapinst.exe through remote desktop connection to the window 2003 server machine getting following error
SAPinst is getting started.
Please be patient ...
guiengine: call to listen() for socket 1812 failed. No such file or directory
ERROR      2008-03-21 01:16:40 [iaxxgenimp.cpp:532]
           init()
FGE-00006 Attempt to open a communication port connection failed. Check whether the port 21213 is already in use.
ERROR      2008-03-21 01:16:40
FCO-00034 An error occurred during the installation. Problem: error in GUI server subsystem.
Exit status of child: 1
I check the all the threads posted and did the following
1. check the another instance is running - no instance running
2. check port with security team , i come to know that they blocked this ports security reason.
so i try with other open ports , even through its giving the same error.
so i have one question
1.is it mandatory to use the same ports 21212 or 21213 etc..
or can we use any other free ports if so what port numbers we can use?
becasue i try with different open ports, no use
as follows"
c:\sapinst.exe SAPINST_DIALOG_PORT=4238
Please give any suggestions...
thnaks in advance
Gopal

You reconnect with the GUI to SAPinst and enter the path to the software package or file manually. Then you can continue with the installation.
You can also change the port nos. 21212 and 21213 to 41212 and 41214
SAPinst uses the port 21212 during the installation for communication with the SAPinst GUI. If one of these ports is already used by another service you must start SAPinst as follows:
sapinst SAPINST_DIALOG_PORT=<free_port_number>
use command : netstat -s      - > to check the ports being used
Cheers
Shaji
Edited by: Shaji Jacob on Mar 21, 2008 10:53 PM

Error determining whether the target server is already a domain controller: Failed to open the runspace pool

Hi there , i already have some others DC running w2k12 R2 on the env, but when i was promoting another new DC running w2k12 R2 on the middle of the AD sync , the server encounter an error and rebooted it self ; after the server came back online , it keep
saying that a configuration is required for AD Domain Services , like the step when you are about to promote the server , but when you try to promote it , the error "Error determining whether the target server is already a domain controller: Failed
to open the runspace pool. The server manager winrm plug-in might be corrupted or missing."

Hi,
Thanks for your post.
Please waitting for the replication is finished and rerun the domain prep command to check the result.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Is there any tool to check whether the proper data is inserting or not?

Hi,
We have different products A,B and C.
whenever user crates an account under these products some X,Y,Z table gets updated.
If user1 creates an account under A then X, Y, Z tables update with some data along with some ID
If user2 creates an account under A then X, Y, Z tables update with SAME DATA along with some other ID
Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?
p.s : if this thread is not related to this forum .. where can I post?
Thanks,
Praveen

Is there any tool to check whether the proper data is inserting (same data is inserting every time) or not?You need to check the code to see that. Is the update or insert on the table has from different places? In that case it would be better to have them moved to a centralized place may be a package.
If you want to restrict the columns to specific values then you can use constraints.

R12.1.1 staging complete! How to check whether the stage is Good

Hi Gurusl,
I have completed staging R12.1.1 for Hp unix B.11.31. I want to know how to check whether the stage is good for installation or whether it is corrupted. Is there any metalink note or script from where we can check it. Ur help will be highly appreciated. Thanks in advance
regards,

Hi,
Please refer to (Note: 802195.1 - MD5 Checksums for R12.1.1 Rapid Install Media).
Regards,
Hussein

We need to check whether the order is locked or not?

I need to check whether the order is locked or not?
I tried to use this RFC KAUF_ORDER_READ and passed Order no.
I manually locked the order( using Tcode -IW32) but still Function module is not returning 'X' in FIELDS flg_locked and FLG_ENQUE of the structure E_KAUF.
the FM should return 'X' in these fields.
Please help.
Coudl anybody suggest me how I can check using RFC/ Table fields etc that whether the order is locked or not?

Hi Rohit,
Try this code. Check the flag.
Note : Order number should have left padding of Zero
DATA : order_tab TYPE TABLE OF ord_pre,
       wa        TYPE ord_pre,
       flag      TYPE rc27x-flg_sel.
wa-aufnr = '000004006789'. "Order number should have left padding of Zero
APPEND wa TO order_tab.
CALL FUNCTION 'CO_ZF_ORDER_READ'
EXPORTING
   flg_dialog               = ' '
*   FLG_ENQUEUE              = 'X'
*   OBJECTS_IMP              = ' '
*   EXPLODE_IMP              = ' '
*   FLG_PROT_IMP             = ' '
*   FLG_NO_EXTERNAL          = ' '
*   FLG_NO_BANF              =
*   FLG_CHECK_SIM            =
*   IMPORT_MESSAGE_ID        =
*   CHECK_STATUS_READ        = ' '
*   FLG_NO_GOS               = ' '
*   FLG_CALLED_TO_COPY       = ' '
IMPORTING
   flg_enqueue_ok           = flag
*   FLG_ESCAPE               =
TABLES
*   AUFNR_DEL_EXP            =
    aufnr_tab_imp            = order_tab
EXCEPTIONS
   ORDER_NOT_FOUND          = 1
   RELEASE_NO_CHANGE        = 2
   OTHERS                   = 3
IF sy-subrc = 0.
WRITE flag. "If Flag is X order is not locked
ENDIF.
Regards
Rajvansh
Edited by: Rajvansh Ravi on Nov 27, 2008 12:33 PM

Need to Check whether the program is Active or not

Is there any statement where i can check whether the report program is Active or not.
Using below statement i am copying the entire Code in internal table it_source.Before copying in the source code in the internal table it_source.I need to check that program is Active or not if it is not active and i need to give a pop message and forceliy i need to Active it.
read report wa_trdir-name into it_source.

Hi Srini,
i just checked the table REPOSRC for a program which was not activated, i got two entries for the program one as active and one as inactive ,as soon as i activated the program there was a single entry.
so is it that we should check if we have any inactive entry in the table for the program?.
Regards,
gunjan

Where to check whether the user is Admin or developer?

how to check whether the user is Admin or developer????? after he sign's in......I want to use role based login!!!!

Login into a workspace or login into an application?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

How to check whether the vendor invoice was reversed (MR8M & FB08)

hi,
need to check whether the vendor invoice has been reversed. Posting of the vendor invoice as well as its reversal may happen in FI (e.g. FB60 - FB08) and MM (MIRO - MR8M). have developed a custom function based on the values of the fields: stblg, stjah,... (for fb08) and rebzg, rebzj,rebzz (for mr8m) and trans type but not sure this is the right way.
Is there a bapi (e.g. similar to BAPI_ACC_INVOICE_REV_CHECK) , sap function or at least a report to as a sample. Any help appreciated.
Thank you,
victor

Viktor, We have always used the table fields values you have listed to determine if the invoice has been reversed or cancelled...

Check whether the checkbox in a form is checked or not using javascript

when we click a check box (TBD) it should set the value of a field to a default value '1234'. If we uncheck the checkbox, it should set the field as Null.
I have defined the checkbox as STATIC2:;1234 in form.
I used the onClick event on the checkbox and called a function to update the column.
Inside the function i am checking whether the check box is checked using
if (document.getElementById('P4_TBD').checked=true)
document.getElementById('P4_COL1).value='1234';
else
document.getElementById('P4_COL1).value=''; /* or $s("P4_COL1", "");
it works only when check box is checked. If check box is unchecked it is not setting the field as Null.
I checked document.getElementById('P4_TBD').checked=false instead of else clause. it is not working.
Please help me on this issue.
Thanks,
Ravi

When you are using checkboxes or option button, the ID for your button is using an index. If you create a group of 3 checkboxes with the ID = "MY_CHECKBOXES", APEX will create the following IDs for each of your options : MY_CHECKBOXES_0, MY_CHECKBOXES_1 and MY_CHECKBOXES_2. If you want to test if the first checkboxe is checked, you'll use document.getElementById('MY_CHECKBOXES_0').checked.
I didn't test for a lone checkbox, but I expect your checkbox to be "TDB_0" not "TDB" who is the frame around your checkbox group.

Howto check whether the input parameter of type table is NULL

hi i have a procedure where the input parameters are of type collection (nested table ) the first line of my proc should check whether the input is null how to do that .
i have defined the collection this way.
CREATE OR REPLACE TYPE acct_tab as table of varchar2(40);
my procedure is as follows
create or replace procedure account_proc ( in_acct_array acct_tab) is
begin
----> I want to check whether the input is null how to do this?
end

Raj,
SQL> CREATE OR REPLACE TYPE acct_tab as table of varchar2(40);
2 /
Type created.
SQL>
SQL> create or replace procedure account_proc ( in_acct_array acct_tab) is
2 begin
3 if in_acct_array IS EMPTY
4 then
5   dbms_output.put_line('empty') ;
6 else
7   dbms_output.put_line(' NOT empty') ;
8 end if ;
9 end;
10 /
Procedure created.
SQL>
SQL> declare
2    v acct_tab:=acct_tab();
3 begin
4          account_proc( v ) ;
5 end ;
6 /
empty
PL/SQL procedure successfully completed.SS

Best way to check whether the database is demo or sys?

Hi Gurus,
Whats the best way to check whether the installed peoplesoft database is a demo or a sys?
Thanks for the help?
Regards,
Anoop

There is nothing set by default.
However, if it has been configured properly by the administrator after db creation, through the menu Peopletools>Utilities>Administration>Peopletools Options, the following query should return the type of the database :
select systemtype from psoptions;Otherwise the following could help to understand what database you are on.
From HRMS9.1 DMO database :
SQL> select count(*) from ps_employees;
2792From HRMS9.1 SYS database :
SQL> select count(*) from ps_employees;
COUNT(*)
0Nicolas.

How to check whether the Application Server directory exits or not

Hi,
I have a selection screen in which I give the Application server file name(UNIX file) as input. Here, I would like to check whether the Server directory exists or not.
Let us say, the path I gave in the selection screen is /usr/sap/tmp/testfile.txt . Here, the file name is testfile.txt and the server directory is /usr/sap/tmp . I would like to check whether this directory /usr/sap/tmp exists in the server or not. I am not bothered about the file name as I am going to write data into the file. I am mainly concerned about whether the directory exists in the server or not. and one more thing... this is the Application Server path not the Local path.
Can anyone help me on the same how to check whether the server directory exists or not.
Thanks in advance.
Best Regards,
Pradeep.

Also you can use the FM EPS_GET_DIRECTORY_LISTING for this purpose.
Store the directory name
    l_dpath = p_file+0(l_no).
Validate the directory of the application server
    CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
      EXPORTING
        dir_name               = l_dpath
      TABLES
        dir_list               = l_i_dlist
      EXCEPTIONS
        invalid_eps_subdir     = 1
        sapgparam_failed       = 2
        build_directory_failed = 3
        no_authorization       = 4
        read_directory_failed = 5
        too_many_read_errors   = 6
        empty_directory_list   = 7
        OTHERS                 = 8.
If any problem occurs with the directory then display proper
error message
    IF sy-subrc <> 0.
    Display error message
      MESSAGE e018 WITH 'Problem with directory entered'(008).
    ENDIF. " sy-subrc <> 0
Regards,
Joy.

This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.

when i am going to Install 11gR2 then thsi error shows how to solve it plz give me guidance
This test checks whether the length of the environment variable "PATH" does not exceed the recommended length.
Expected Value: 1023
Actual Value: 0

HELLO iSHAN SHAH
JUST EXPLAIN US YOUR PROBLEM IN DEPTH.
TELL US YOUR HARDWARE AND SOFTWARE CONFIGURATION.
ALSO TELL US IN WHICH STEP OF INSTALLATION , THIS ERROR RAISED.
THANKS
HARSH SHAH

Check whether the port 21212 is already in use.

Similar Messages

Maybe you are looking for