Check Writer is failed with HR_6990_HRPROC_CHQ_SRW2_FAILED

Failed with
HR_6990_HRPROC_CHQ_SRW2_FAILED
APP-PAY-06990: Report Writer report failed with an error
Cause: The report failed to complete and returned an error condition.
Action: Check the report logfile in PAY_TOP/APPLOUT/xx.lg for reason for the failure.
I don't see anything in $PAY_TOP/APPLOUT, it is all empty files. all of the worker processes completed except one worker process failed.
i would like to restart the check writer. do i need to rollback the "check writer" alone before i restart the "Check Writer" ?

974096 wrote:
Failed with
HR_6990_HRPROC_CHQ_SRW2_FAILED
APP-PAY-06990: Report Writer report failed with an error
Cause: The report failed to complete and returned an error condition.
Action: Check the report logfile in PAY_TOP/APPLOUT/xx.lg for reason for the failure.
I don't see anything in $PAY_TOP/APPLOUT, it is all empty files. all of the worker processes completed except one worker process failed.
i would like to restart the check writer. do i need to rollback the "check writer" alone before i restart the "Check Writer" ?Please see these docs.
Checkwriter Fails With APP-PAY-06859, APP-PAY-06990,APP-FND-00500: AFPPRN and kgepop Errors in 11.5 [ID 227408.1]
Archive Deposit Advice Error with APP-PAY-06990, HR_6859_HRPROC_OTHER_PROC_ERR and 'Check your installation manual' Messages [ID 564537.1]
Oracle Payroll 'Check / Cheque Writer / Deposit Advice' Frequently Asked Questions (FAQ) [ID 1373891.1]
Error running the cheque writer process PAY-06990 HR_6990_HRPROC_CHQ_SRW2_FAILED [ID 402550.1]
Seeded Third Party CheckWriter Errors Out With: REP-1212, REP-0069, REP-57054 [ID 1466418.1]
Canadian Chequewriter Fails with Rep-1212 and HR_6990_HRPROC_CHQ_SRW2_FAILED [ID 145826.1]
Thanks,
Hussein

Similar Messages

Check Event Alert failed with error - No errors in the log file.

Hi All,
I am developing a simple event based alert on PO_HEADERS table. I want to send alerts when a PO is created.
I did all the steps according to the metalink note How To Send An Email In A Simple Periodic Or Event Alert? [ID 1162153.1]
When i create the PO, the alert is triggering, and Check Event Alert concurrent program is running. But the program completes with error.
Checking the output file (empty) log file (no errors)
What can i do here to find out what is the problem? There is nothing in the Alert Manager - History form also. I have kept 7 days as days to keep.
Thanks!
M

Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
Thanks,
Hussein

Check Writer & Payroll Activity report failing

Hi,
After upgrade from 10.2.0.3 to 11.2.0.2 database in R12.0.6 application, the Check Writer & Payroll Activity report is failing with following errors:
REP-0069: Internal error
REP-57054: In-process job terminated:Finished successfully but output is voided
R_6990_HRPROC_CHQ_SRW2_FAILED
APP-PAY-06990: Report Writer report failed with an error
Pl let me know if anyone has had similar issue?
thanks

Please see the suggested solutions in these docs.
Error Hr_6990_hrproc_chq_srw2_failed When Running Canadian Chequewriter [ID 1087796.1]
Checkwriter Fails With APP-PAY-06859, APP-PAY-06990,APP-FND-00500: AFPPRN and kgepop Errors in 11.5 [ID 227408.1]
Checkwriter Fails With Errors HR_6990_HRPROC_CHQ_SRW2_FAILED, APP-PAY-06990 [ID 263862.1]
Check Writer Fails with Error HR_6990_HRPROC_CHQ_SRW2_FAILED [ID 242563.1]
Error running the cheque writer process PAY-06990 HR_6990_HRPROC_CHQ_SRW2_FAILED [ID 402550.1]
Thanks,
Hussein

Error when running check writer

Hi ,
i am running check writer process in test instance and i am getting this error. Can anybody help me with this.
PL/SQL Output
HR_6990_HRPROC_CHQ_SRW2_FAILED
APP-PAY-06990: Report Writer report failed with an error

Hi,
I am also getting the same error when running Check Writer or Deposit Advice. I tried to see above two notes but did not help me much.
Here is the log file...
HR_6990_HRPROC_CHQ_SRW2_FAILED
APP-PAY-06990: Report Writer report failed with an error
Cause: The report failed to complete and returned an error condition.
Action: Check the report logfile in PAY_TOP/APPLOUT/xx.lg for reason for the failure.
We are using custom rdf file for both of the processes and are doing upgrade to R12 from 11.5.10.
Does anyone has encountered this situation.
Thanks,
Raghu

CO_COSTCTR Archiving Write Job Fails

Hello,
The CO_COSTCTR archiving write job fails with the error messages below.
Input or output error in archive file \\HOST\archive\SID\CO_COSTCTR_201209110858
Message no. BA024
Diagnosis
An error has occurred when writing the archive file \\HOST\archive\SID\CO_COSTCTR_201209110858 in the file system. This can occur, for example, as the result of temporary network problems or of a lack of space in the fileing system.
The job logs do not indicate other possible causes. The OS and system logs don't have either. When I ran it in test mode it it finished successfully after long 8 hours. However, the error only happens during production mode where the system is generating the archive files. The weird thing, I do not have this issue with our QAS system (db copy from our Prod). I was able to archive successfully in our QAS using the same path name and logical name (we transport the settings).
Considering above, I am thinking of some system or OS related parameter that is unique or different from our QAS system. Parameter that is not saved in the database as our QAS is a db copy of our Prod system. This unique parameter could affect archiving write jobs (with read/write to file system).
I already checked the network session timeout settings (CMD > net server config) and the settings are the same between our QAS and Prod servers. No problems with disk space. The archive directory is a local shared folder \\HOST\archive\SID\<filename>. The HOST and SID are variables which are unique to each system. The difference is that our Prod server is HA configured (clustered) while our QAS is just standalone. It might have some other relevant settings I am not aware of. Has anyone encountered this before and was able to resolve it?
We're running SAP R3 4.7 by the way.
Thanks,
Tony

Hi Rod,
We tried a couple of times already. They all got cancelled due to the error above. As much as we wanted to trim down the variant, the CO_COSTCTR only accepts entire fiscal year. The data it has to go through is quite a lot and the test run took us more that 8 hours to complete. I have executed the same in our QAS without errors. This is why I am bit confused why in our Production system I am having this error. Aside that our QAS is refreshed from our PRD using DB copy, it can run the archive without any problems. So I made to think that there might be unique contributing factors or parameters, which are not saved in the database that affects the archiving. Our PRD is configured with High availability; the hostname is not actually the physical host but rather a virtual host of two clustered servers. But this was no concern with the other archiving objects; only in CO_COSTCTR it is giving us this error. QAS has archiving logs turned off if it’s relevant.
Archiving 2007 fiscal year cancels every after around 7200 seconds, while the 2008 fiscal year cancels early around 2500 seconds. I think that while the write program is going through the data in loops, by the time it needs to access back the archive file, the connection has been disconnected or timed out. And the reason why it cancels almost consistently after an amount of time is because of the variant, there is not much variety to trim down the data. The program is reading the same set of data objects. When it reaches to that one point of failure (after the expected time), it cancels out. If this is true, I may need to find where to extend that timeout or whatever it is that is causing above error.
Thanks for all your help. This is the best way I can describe it. Sorry for the long reply.
Tony

OCIEnvNlsCreate failed with return code -1

Hi, we're getting this error when running SQL Server 2005 Reporting Services to connect to an Oracle 9i database. The report works fine locally but breaks on the web. Another user has posted about this same exact issue to Microsoft's SSRS forum, but with no answer: http://tinyurl.com/ynqv7o
Your help is much appreciated. Thank you.

Check Re: OCIEnvNlsCreate failed with return code -1

SQL 2012 install fails with 'Object reference not set to an instance of an object.'

Hi, I'm trying to install SQL 2012 RTM Enterprise on a Windows 2008 R2 single node cluster.
The installer starts goes through some checks and then fails with the message 'Object reference not set to an instance of an object.' It happens while the small 'wait while...' dialog box is
showing, another window pops up briefly (I think the feature selection window - can't really tell as it doesn't draw before disappearing). Then the ‘Object reference not set’ message comes up.
From the summary log file..
Overall summary:
Final result:
Failed: see details below
Exit code (Decimal):
-2147467261
Exit facility code:
0
Exit error code:
16387
Exit message:
Object reference not set to an instance of an object.
Start time:
2012-09-26 08:52:53
End time:
2012-09-26 08:54:08
Requested action:
InstallFailoverCluster
Exception help link:
http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.2100.60&EvtType=0x9AF1AE5E%400x44A889F9&EvtType=0x9AF1AE5E%400x44A889F9
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()
I have rebooted, tried different media, tried uninstalling the setup files and rerunning but always get the same result.
Any help would be gratefully accepted.
Thanks,
Bruce.

Hi Alberto,
Whenever I am trying to install SQL 2012 with SP1 clustering, I am getting below error. Can you please advise on this.
Additional information are
Windows Servers Version and Edition - Windows 2012 Strandedition
SQL Server Version and Edition - SQL 2012 with SP1
All the machines are running on Hyper-V and Passed the cluster validation test successfully. there is no issue. The servers' (Nodes) names are;
DomainServerName - ACONDomainGroup (1gb ram allocated)
Node1 - AconNODE1W2K12STD (2.5gb ram allocated )
Node2 - AconNODE2W2K12STD (1.5 ram allocated allocated)
WindowsClusterName - AconWinCLTR
Below is Summary.txt Error
Update Source: MU
User Input Settings:
ACTION: InstallFailoverCluster
AGTDOMAINGROUP: <empty>
AGTSVCACCOUNT: <empty>
AGTSVCPASSWORD: <empty>
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
ENU: true
ERRORREPORTING: false
FAILOVERCLUSTERDISKS: <empty>
FAILOVERCLUSTERGROUP:
FAILOVERCLUSTERIPADDRESSES: <empty>
FAILOVERCLUSTERNETWORKNAME: <empty>
FEATURES:
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: <empty>
INSTANCENAME: <empty>
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: <empty>
SQLSVCPASSWORD: <empty>
SQLSYSADMINACCOUNTS: <empty>
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140420_052344\SystemConfigurationCheck_Report.htm
Exception summary:
The following is an exception stack listing the exceptions in outermost to innermost order
Inner exceptions are being indented
Exception type: System.NullReferenceException
Message:
Object reference not set to an instance of an object.
HResult : 0x80004003
Data:
HelpLink.EvtType = 0x9AF1AE5E@0x44A889F9
DisableWatson = true
Stack:
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.ShouldRuleRun(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.IsRuleSkipped(Rule rule)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRule(String ruleId, List`1 ruleProperties, XmlSchema ruleSchema, XmlElementParserFactory elementParser)
at Microsoft.SqlServer.Configuration.RulesEngineExtension.RulesEngine.LoadRules(IEnumerable`1 ruleIds)
at Microsoft.SqlServer.Configuration.InstallWizard.RunRuleProgressController.Initialize()

ADF 11.1.1.3 works ok, 11.1.1.4 installer fails with prerequisites

Hi OTN,
I have WebLogic 10.3.3 for several months working with ADF 11.1.1.1, 1.2 and 1.3 continuously.
Now I have installed WebLogic 10.3.4 and trying to install ADF 11.1.1.4 following this guide: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14827/install.htm
After starting ./runInstaller -jreLoc= ... the installer checks prerequisites and fails with several items (listed below).
My question is: is it normal that ADF 11.1.1.4 misses several libraries and kernel parameters in the same system that runs ADF 11.1.1.3?
Or I misunderstand smth?
Thanks.
RHEL 5.5 x64, JRockit 4.0.1 (VMware on Windows 7)
Here is the installer log:
RootChecking operating system certification
Expected result: One of enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
Actual Result: enterprise-5.4
Check complete. The overall result of this check is: Passed
Checking recommended operating system packages
Checking for binutils-2.17.50.0.6; found binutils-2.17.50.0.6-14.el5-x86_64.     Passed
Checking for compat-libstdc++-33-3.2.3-x86_64; found compat-libstdc++-33-3.2.3-61-x86_64.     Passed
Checking for compat-libstdc++-33-3.2.3-i386; found compat-libstdc++-33-3.2.3-61-i386.     Passed
Checking for elfutils-libelf-0.125; found elfutils-libelf-0.137-3.el5-x86_64.     Passed
Checking for elfutils-libelf-devel-0.125; Not found.     Failed <<<<
Checking for gcc-4.1.1; Not found.     Failed <<<<
Checking for gcc-c++-4.1.1; Not found.     Failed <<<<
Checking for glibc-2.5-12-x86_64; found glibc-2.5-49-x86_64.     Passed
Checking for glibc-2.5-12-i686; found glibc-2.5-49-i686.     Passed
Checking for glibc-common-2.5; found glibc-common-2.5-49-x86_64.     Passed
Checking for glibc-devel-2.5-x86_64; Not found.     Failed <<<<
Checking for glibc-devel-2.5-12-i386; Not found.     Failed <<<<
Checking for libaio-0.3.106-x86_64; found libaio-0.3.106-5-x86_64.     Passed
Checking for libaio-0.3.106-i386; found libaio-0.3.106-5-i386.     Passed
Checking for libaio-devel-0.3.106; Not found.     Failed <<<<
Checking for libgcc-4.1.1-x86_64; found libgcc-4.1.2-48.el5-x86_64.     Passed
Checking for libgcc-4.1.1-i386; found libgcc-4.1.2-48.el5-i386.     Passed
Checking for libstdc++-4.1.1-x86_64; found libstdc++-4.1.2-48.el5-x86_64.     Passed
Checking for libstdc++-4.1.1-i386; found libstdc++-4.1.2-48.el5-i386.     Passed
Checking for libstdc++-devel-4.1.1; Not found.     Failed <<<<
Checking for make-3.81; found make-1:3.81-3.el5-x86_64.     Passed
Checking for sysstat-7.0.0; Not found.     Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: Some recommended packages are missing (see above).
Recommendation: You may actually have installed packages which have obsoleted these, in which case you can successfully continue with the install. If you have not, it is recommended that you do not continue. Refer to the product release notes to find out how to get the missing packages and update the system.
Checking kernel parameters
Checking for VERSION=2.6.18; found VERSION=2.6.18-194.el5.     Passed
Checking for hardnofiles=4096; hardnofiles=1024.     Failed <<<<
Checking for softnofiles=4096; softnofiles=1024.     Failed <<<<
Check complete. The overall result of this check is: Failed <<<<
Problem: The kernel parameters do not meet the minimum requirements (see above).
Recommendation: Perform operating system specific instructions to update the kernel parameters.
Checking Recommended glibc version
Expected result: ATLEAST=2.5-12
Actual Result: 2.5-49
Check complete. The overall result of this check is: Passed
Checking physical memory
Expected result: 1024MB
Actual Result: 5456MB
Check complete. The overall result of this check is: Passed

ILya,
The [url http://download.oracle.com/docs/pdf/E18558_01.pdf]system requirements documentation for OFM 11.1.1.4 coincides with what the installer is telling you, so if it worked on 11.1.1.3 then either the requirements have changed or perhaps the 11.1.1.3 installer didn't check for the requirements properly. Note that the system requirements doc seems to be updated in-place, so I have no way of comparing the old vs the new system requirements.
At any rate, the installer tells you what you need, so apparently you need them.
John

DAG - Backup failing on 1 DB only with error - The Microsoft Exchange Replication service VSS Writer instance ID failed with error code 80070020 when preparing for a backup of database 'DB012'

Hi Board,
i´ve search across the board, technet and symantec sites but did not found a hint about my problem.
we drive a 2 node DAG (Location1-Ex1-mb1
Location2-exc1-mb1), on SP2 RU4 patchlevel with 40 Databases.
Since some time the backup of one - and only one DB - is failing with these events, logged on the Mailboxserver on which the passive DB is hosted.
Log Name:      Application
Source:        MSExchangeRepl
Date:          28.09.2012 00:37:17
Event ID:      2112
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Location1-Exc1-MB1
Description: The Microsoft Exchange Replication service VSS Writer instance 1ab7d204-609a-4aea-b0a7-70afb0db38de failed with error code 80070020 when preparing for a backup of database 'DB012'.
Followed by
Log Name:      Application
Source:        MSExchangeRepl
Date:
01.10.2012 03:33:06
Event ID:      2024
Task Category: Exchange VSS Writer
Level:         Error
Keywords:      Classic
User:
N/A
Computer:      Location1-Exc1-MB1
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 42916d80-36c1-4f73-86d0-596d30226349) failed with error 80070020 when preparing for a backup.
The backup Application - Symantec Backup Exec 2010 R3 – states, this error
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Exchange Server, Writer ID: {76FE1AC4-15F7-4BCD-987E-8E1ACB462FB7}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Stable (1).
Symatec suggests within http://www.symantec.com/business/support/index?page=content&id=TECH184095
to restart the MS Exchange Replication Service – BUT the mentioned eventID
8229 isn´t present on any of the both Mailboxservers.
The affected Database is active on Location2-Exc1-Mb1 Server and in an overall healthy state. I found during my research, that below Location2-Exc1-Mb1 Server, there are not removed shadow copies present!
This confuses me, since all Backups are normally taken from the passive copy of a Database.
So my questions to the board are:
* Does anyone is facing similar issues?
* Can someone explain why snapshots are present on the Mailboxserver hosting the Active Database, whilst the errors are logged on the passive one?
-          * Does someone know the conditions, why shadows copies remain and
aren´t removed in a proper manner?
What can cause the circumstance, that only 1 DB is facing such issues?
Any suggestion is welcome!
BR
Markus

Hi Lenora,
I´ve encreases VSS / Exchange Backup Log levels to expert, before starting
those things i´ve all tried now:
- Backup from passive DB (forced within Symantec Backup Exec)
- Backup from active DB (forced within Symantec Backup Exec)
- Backup from passive DB without GRT enabled (forced within Symantec Backup Exec)
- Backup from active DB without GRT enabled(forced within Symantec Backup Exec)
All those attempts failed.
But brought some more details - the backup against the active DB states, that there is still a backup in progress and therefore this backup is cancelled by VSS.
The Solution was, that i´ve needed to restart the Exchange Replication Service on the Mailbox Server hosting the passive DB.
Backups are working again on all DBs!
THX for your replys.
Best regards
Markus

Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

Hi
We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
i am stumped, any advice would be great!

Hi
Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261645</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
</EventData>
</Event>
AND
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261646</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
</EventData>
</Event>
and
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2034
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2034</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261649</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>FFFFFFFC</Data>
</EventData>
</Event>
and
Log Name: Application
Source: SPP
Date: 21/01/2013 10:16:30
Event ID: 16389
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying... More info: .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SPP" />
<EventID Qualifiers="0">16389</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261650</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft Exchange Writer</Data>
<Data>
</Data>
<Data>The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
<Data>
</Data>
<Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
</EventData>
</Event>

RSEOUT00 failing with "Could not write IDoc to file" TPRI_DEF table

Outbound Idoc processing fail with the following error:
Could not write IDoc to file
Message no. EA299
Diagnosis
The system could not convert data from the data record 000027.
Procedure
Check the port definition of the receiver port.
You can use the "Continue despite conversion error" option to write the IDoc to the file from transaction BD87 with replacement characters.
Short dump indicate that there is a some junk character in th e TPRI_DEF for program SAPLSPRI that it is unable to convert.
I have set the flag on the we21 port to "continue despite conversion error" and that seem to help, but I would like to figure out how to fix the junk characters from coming through from the TPRI_DEF table.
This is what shows up in the short dump after RSEOUT00 is run.
TPRI_DEF                                   / /       : :     00002932
    010GV21            \0\0\0\0\x0006āȂ耀㐱〲\0\0嬇\0ሟ鴂푎眩\x0802儔잏퉓
I do not see any entries for area "GV" in the table, there is one for "GF". which has no user assigned to it and it is of key version 21.
I am not sure if the table is supposed to have an entry with no user assigned?
thank you for looking at this issue .

HI Jurgen,
we have the same issue, chinese charecter is in PO text header. so facing error. If we click unicode format then it works fine as my testing in development.
I just want to knom what is the impact if i clicked directly unicode format ?( with refernce to your reply above " have you set the Unicode format flag directly above in WE21?" )
I doc is going from SAP sytem - (PO information )
Pls adivce..
waiting for your reply..
Thanks in advance

KQRCMT: Write failed with error=604 Errors in Trace File

Anyone know what errors like these in the trace file might indicate? I'm trying to diagnose why one of our application processes died without warning, and found this in the process trace file right about the time when it died. My Oracle Support turns up very few hits, none of them helpful. Google likewise had very little to say on the matter.
Also there were no errors thrown in the alert log during the time indicated in the trace file messages.
*** 2011-02-01 14:30:29.976
*** MODULE NAME:() 2011-02-01 14:30:29.976
*** ACTION NAME:() 2011-02-01 14:30:29.976
KQRCMT: Write failed with error=604 po=0xa68636878 cid=13
diagnostics : cid=13 hash=7ad19577 flag=2a
KQRCMT: Write failed with error=604 po=0xa68636878 cid=13
diagnostics : cid=13 hash=7ad19577 flag=2a
*** 2011-02-01 14:30:33.416
KQRCMT: Write failed with error=604 po=0xa68636878 cid=13
diagnostics : cid=13 hash=7ad19577 flag=2a
*** 2011-02-01 14:30:35.343
KQRCMT: Write failed with error=604 po=0xa68636878 cid=13
diagnostics : cid=13 hash=7ad19577 flag=2a
KQRCMT: Write failed with error=604 po=0xa68636878 cid=13
diagnostics : cid=13 hash=7ad19577 flag=2a
*** 2011-02-01 14:30:36.572
KQRCMT: Write failed with error=604 po=0xa68636878 cid=13
diagnostics : cid=13 hash=7ad19577 flag=2a
*** 2011-02-01 14:30:38.684
KQRCMT: Write failed with error=604 po=0xa68636878 cid=13
diagnostics : cid=13 hash=7ad19577 flag=2a
*** 2011-02-01 14:30:39.316
KQRCMT: Write failed with error=604 po=0xa68636878 cid=13
diagnostics : cid=13 hash=7ad19577 flag=2a
*** 2011-02-01 14:30:40.575
KQRCMT: Write failed with error=604 po=0xa68636878 cid=13
diagnostics : cid=13 hash=7ad19577 flag=2a
...etc, etc...Thanks.

Hi All ,
MY database is oracle 11G , SParc OS 64 Bit , i got the same error on my primary database.
Please find the exact error below :
KQRCMT: Write failed with error=604 po=3ebb848b0 cid=13
diagnostics : cid=13 hash=d906a6b flag=2a
KQRCMT: Write failed with error=604 po=3ebb848b0 cid=13
diagnostics : cid=13 hash=d906a6b flag=2aThat is the only error in the trace file.
i have checked on google and metalink but not much is available.
please suggest
Thanks
Kk
Edited by: Kk on Apr 8, 2011 5:19 AM

Readiness Checks fail with "The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception."

There's another thread about this issue but the accepted answer actually has nothing at all to do with the original problem/question so that's a bit deceptive.
Anyway, when trying to install Exchange 2013 SP1 (on 2012 R2 Datacentre) the installation reaches the Configuring Prerequisites part of the Readiness Checks and then fails out with the message:
The type initializer for 'Microsoft.Exchange.Configuration.Tasks.ThrottlingModule`1' threw an exception.
I honestly can't find any way around this issue and the only mentions I've seen resulted in people reinstalling Windows which obviously isn't really a resolution to the problem.
Is there any known fix for this issue?

Ok well I've managed to get around that now by recreating a few registry keys and documented that here (apparently I'm not allowed to create links so can't put that here).
I have a new issue now though. It seemed to get almost all the way through the installation process but is now failing due to a "memory" issue although due to the wording I can't tell whether it means RAM or Disk space. Either way, neither should
apply. The drive has 80GB of space available and the machine has 8GB of RAM (only 2GB in use at the time the installer was ran and the amount didn't drop).
The exact error is...
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
$FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
$FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
Write-ExchangeSetupLog -Info "Loading FipFs snapin";
Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
# Copy Microsoft Engine to Engines folder during the install
$FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
$MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
$MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
$MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
if(! $MicrosoftEngineExists)
Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
" was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
Error:
The following error was generated when "$error.Clear();
Write-ExchangeSetupLog -Info "Setting up FIPS configuration based on Exchange Install Path";
$FipsDataPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Data");
$FipsEnginesPath = [System.IO.Path]::Combine($FipsDataPath, "Engines");
Write-ExchangeSetupLog -Info "Loading FipFs snapin";
Add-PsSnapin Microsoft.Forefront.Filtering.Management.PowerShell -ErrorAction SilentlyContinue;
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:TraceFile" -Value $FipsDataPath -Confirm:$false
Set-ConfigurationValue -XPath "/fs-conf:Configuration/fs-sys:Machine/fs-sys:Paths/fs-sys:Engines" -Value $FipsEnginesPath -Confirm:$false
# Copy Microsoft Engine to Engines folder during the install
$FipsBinPath = [System.IO.Path]::Combine($RoleInstallPath, "FIP-FS\Bin");
$MicrosoftEngineSourcePath = [System.IO.Path]::Combine($FipsBinPath, "Engine\Microsoft");
$MicrosoftEngineDestinationPath = [System.IO.Path]::Combine($FipsEnginesPath, "amd64\Microsoft");
$MicrosoftEngineExists = Test-Path $MicrosoftEngineDestinationPath
if(! $MicrosoftEngineExists)
Robocopy $MicrosoftEngineSourcePath $MicrosoftEngineDestinationPath /S /COPYALL
" was run: "Creating an instance of the COM component with CLSID {2DC947D7-A2DC-4276-A554-891346CE2032} from the IClassFactory failed due to the following error: 8007000e Not enough storage is available to complete this operation. (Exception from HRESULT: 0x8007000E (E_OUTOFMEMORY)).".
So if it's not the drive (there's only one drive in the machine) or RAM then what exactly has it ran out of?

HELP: flarcreate fails with ERROR: unable to write archive

Greetings,
Having trouble trying to create flar file.
I am using the following syntax, but the -X seems to be ignored and I can't find what the format for that file should be.
appdev03 # flarcreate -n appdev03 -S -H -a "author" -X /tmp/exclude /tools/appdev03.flar
Full Flash
Checking integrity...
Integrity OK.
WARNING: fdo: Ignoring duplicate filter entry. Choosen entry will be: /opt/orca/var -
WARNING: fdo: Ignoring duplicate filter entry. Choosen entry will be: /opt/orca/var -
Running precreation scripts...
Precreation scripts done.
Creating the archive...
cpio: "var/tmp/21502_00000001" ?
cpio: "var/tmp/28914_00000001" ?
cpio: "var/tmp/28939_00000001" ?
cpio: "var/tmp/26624_00000001" ?
cpio: "var/tmp/26627_00000001" ?
cpio: "var/tmp/04733_00000001" ?
cpio: "var/tmp/29298_00000001" ?
cpio: "var/tmp/13627_00000001" ?
cpio: "var/tmp/13628_00000001" ?
cpio: "var/tmp/02531_00000001" ?
cpio: "var/tmp/02532_00000001" ?
cpio: "var/tmp/04735_00000001" ?
cpio: "var/tmp/xsauthn" ?
cpio: "var/tmp/27491_00000001" ?
cpio: "var/tmp/08868_00000001" ?
cpio: "var/tmp/08869_00000001" ?
cpio: "var/tmp/20269_00000001" ?
cpio: "var/tmp/20270_00000001" ?
cpio: "var/tmp/27492_00000001" ?
cpio: "var/tmp/xsauthz" ?
cpio: "var/tmp/16103_00000001" ?
cpio: "var/tmp/16104_00000001" ?
cpio: "var/tmp/29964_00000001" ?
cpio: "var/tmp/03913_00000001" ?
cpio: "var/tmp/09305_00000001" ?
cpio: "var/tmp/10454_00000001" ?
cpio: "var/tmp/10505_00000001" ?
cpio: "var/tmp/07839_00000001" ?
cpio: "var/tmp/08129_00000001" ?
cpio: "var/tmp/00574_00000001" ?
cpio: "var/tmp/00694_00000001" ?
cpio: "var/tmp/05611_00000001" ?
cpio: "var/tmp/05612_00000001" ?
cpio: "var/tmp/01281_00000001" ?
cpio: "var/tmp/06672_00000001" ?
cpio: "var/tmp/06674_00000001" ?
cpio: "var/tmp/14242_00000001" ?
cpio: "var/tmp/14243_00000001" ?
cpio: "var/tmp/13904_00000001" ?
cpio: "var/tmp/13924_00000001" ?
cpio: "var/tmp/25133_00000001" ?
cpio: "var/tmp/25159_00000001" ?
cpio: "var/tmp/27648_00000001" ?
cpio: "var/tmp/27649_00000001" ?
cpio: "var/tmp/29284_00000001" ?
cpio: "var/tmp/29287_00000001" ?
cpio: "var/tmp/12637_00000001" ?
cpio: "var/tmp/12640_00000001" ?
cpio: "var/tmp/13947_00000001" ?
cpio: "var/tmp/03944_00000001" ?
cpio: "var/tmp/03945_00000001" ?
cpio: "var/tmp/13950_00000001" ?
cpio: Error with fstatat() of "opt/appworx/log/RmiServer1106141450.log", errno 2, No such file or directory
cpio: Error with fstatat() of "opt/appworx/log/RmiServer1106141440.log", errno 2, No such file or directory
22708784 blocks
54 error(s)
Unable to write archive file.
ERROR: Unable to write archive.
my -X file /tmp/exclude is as follows, yet it seems ignored:
appdev03 # more /tmp/exclude
/var/tmp/.oracle
/var/tmp/[0-9*]
/var/tmp/xsauthz
/var/crash
/tlg
/tacp
/depot
/tools
/toolsdb
/development
/opt/orca/var
/usr/local/CAcrypto/cacrypto_solaris.tar
/usr/local/CAcrypto/cacrypto_sun4_solaris.tar
/usr/local/CAcrypto/cacrypto.tar
/var/opt/oracle/jre/jre.tar
/var/opt/oracle/oraInventory.09252003.tar
/var/opt/oracle/oraInventory.10212003.tar
/var/opt/oracle/oraInventory.11032003.tar
/var/opt/oracle/jre.tar
/opt/ca/harvest/harvest.tar
/opt/ca/harvest/tomcat55/apache-tomcat-5.5.20.tar
/opt/ca/harvest/tomcat55/apache-tomcat-5.5.20-compat.tar
/opt/ca/caiptodbc/odbc511.tar
/opt/appworx/UWClient/web/images.tar
/opt/appworx/jre.tar
/opt/appworx/apache.tar
/opt/appworx/apache_dev.tar
/opt/appworx61/jre.tar
/opt/appworx61/apache.tar
/opt/appworx61/AWjars.tar
/opt/appworx61/AWutil.tar
/opt/appworx61/install/v61/apache.tar
/opt/appworx61/install/v61/awjars.tar
/opt/appworx61/install/v61/awutil.tar
/opt/appworx61/install/v61/jre.tar
/opt/appworx/log/RmiServer1106141450.log
/opt/appworx/log/RmiServer1106141440.log
/emc/2312fcode_2_00_6.tar
the file is there but not sure of its accuracy:
appdev03 # flar -i appdev03
files_archived_method=cpio
creation_date=20110621221025
creation_master=appdev03
content_name=appdev03
creation_node=appdev03
creation_hardware_class=sun4u
creation_platform=SUNW,Netra-T12
creation_processor=sparc
creation_release=5.9
creation_os_name=SunOS
creation_os_version=Generic_118558-39
files_compressed_method=none
content_author=author
content_architectures=sun4u
type=FULL
system is Solaris 9 04/03 with Generic_118558-39 V1280.
plenty of space in the directory being written to and I can touch a file there as well.
Any advise is appreciated, thanks.
Jeff
Edited by: user13021352 on Jun 21, 2011 3:40 PM

What report is it ?
Did you try and search metalink ?
How to handle 'ORA-01652: unable to extend the temp segment by 128 in tablespace' error messages? (Doc ID 1359238.1)
R12 Journal Entries Report (XLAJELINESRPT) Has Performance Issue Or Fails With Error: "java.sql.SQLException: ORA-01652: unable to extend temp segment by 128 in tablespace TEMP1" (Doc ID 1141673.1)
This forum may be the right one for your question - General EBS Discussion

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

Check Writer is failed with HR_6990_HRPROC_CHQ_SRW2_FAILED

Similar Messages

Maybe you are looking for