Check Writer & Payroll Activity report failing
Hi,
After upgrade from 10.2.0.3 to 11.2.0.2 database in R12.0.6 application, the Check Writer & Payroll Activity report is failing with following errors:
REP-0069: Internal error
REP-57054: In-process job terminated:Finished successfully but output is voided
R_6990_HRPROC_CHQ_SRW2_FAILED
APP-PAY-06990: Report Writer report failed with an error
Pl let me know if anyone has had similar issue?
thanks
Please see the suggested solutions in these docs.
Error Hr_6990_hrproc_chq_srw2_failed When Running Canadian Chequewriter [ID 1087796.1]
Checkwriter Fails With APP-PAY-06859, APP-PAY-06990,APP-FND-00500: AFPPRN and kgepop Errors in 11.5 [ID 227408.1]
Checkwriter Fails With Errors HR_6990_HRPROC_CHQ_SRW2_FAILED, APP-PAY-06990 [ID 263862.1]
Check Writer Fails with Error HR_6990_HRPROC_CHQ_SRW2_FAILED [ID 242563.1]
Error running the cheque writer process PAY-06990 HR_6990_HRPROC_CHQ_SRW2_FAILED [ID 402550.1]
Thanks,
Hussein
Similar Messages
-
Activity report failed(Communication error)- while check-in Activity
Hello SDN,
I am getting following error while Checking in activity from open activities .currently we are using NWDS7.3
CHECKIN Finished24s.9Files scuceeded.
ACTIVATE Activation Performed.Build request ID : 166
Internal Problem(Activity report failed(Communication error
[cause: Unalble to open connection to host<host>:<port>][reason:Address already in use : connect]]))
Check-in completed successfully but Activation is not completed and giving connectivity error described above. Again
I activated activity from Activation view. Still I am getting following error description.Plesae provide me solution
to resolve this issue.
GET_STATUS could not retrieve activation status of request '166' (Unable to connect to
host:port-Address already in use:connect(Service call exception; nested exception java.io.
IOException: Unable to connect to host:port-Address already in use:connect))
regards,
Sree.Just check the full hostname of your DTR server, should be like
hostname.company.com
and check if somewhere only
hostname
is being used.and both are getting successfully pinged. DO not try the NWDS ping. Use command prompt and
ping hostname
and
ping hostname.company.com
Also this happens due to some clash with some other developer. Please check after some time, may be after a desktop restart. things should start working.
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM -
Check Writer is failed with HR_6990_HRPROC_CHQ_SRW2_FAILED
Failed with
HR_6990_HRPROC_CHQ_SRW2_FAILED
APP-PAY-06990: Report Writer report failed with an error
Cause: The report failed to complete and returned an error condition.
Action: Check the report logfile in PAY_TOP/APPLOUT/xx.lg for reason for the failure.
I don't see anything in $PAY_TOP/APPLOUT, it is all empty files. all of the worker processes completed except one worker process failed.
i would like to restart the check writer. do i need to rollback the "check writer" alone before i restart the "Check Writer" ?974096 wrote:
Failed with
HR_6990_HRPROC_CHQ_SRW2_FAILED
APP-PAY-06990: Report Writer report failed with an error
Cause: The report failed to complete and returned an error condition.
Action: Check the report logfile in PAY_TOP/APPLOUT/xx.lg for reason for the failure.
I don't see anything in $PAY_TOP/APPLOUT, it is all empty files. all of the worker processes completed except one worker process failed.
i would like to restart the check writer. do i need to rollback the "check writer" alone before i restart the "Check Writer" ?Please see these docs.
Checkwriter Fails With APP-PAY-06859, APP-PAY-06990,APP-FND-00500: AFPPRN and kgepop Errors in 11.5 [ID 227408.1]
Archive Deposit Advice Error with APP-PAY-06990, HR_6859_HRPROC_OTHER_PROC_ERR and 'Check your installation manual' Messages [ID 564537.1]
Oracle Payroll 'Check / Cheque Writer / Deposit Advice' Frequently Asked Questions (FAQ) [ID 1373891.1]
Error running the cheque writer process PAY-06990 HR_6990_HRPROC_CHQ_SRW2_FAILED [ID 402550.1]
Seeded Third Party CheckWriter Errors Out With: REP-1212, REP-0069, REP-57054 [ID 1466418.1]
Canadian Chequewriter Fails with Rep-1212 and HR_6990_HRPROC_CHQ_SRW2_FAILED [ID 145826.1]
Thanks,
Hussein -
Hi Guys,
Need your quick help. Most of you are aware of Check Writer(XML) seeded report. I could get the data for all the Business Groups dynamically.
But the Logo and the Address of the BG remain same for any sorts of parameters. The Logo and the address are defaulted as Oracle.
Could you lemme knw how shd the logo and the address of the BG be changed?
Any i/p is highly appreciated.
Thanks in advance.Hi Swat,
You need to create your own Custom template.
Just cope the seeded one and change the logo to whatever you want.
How to Register Custom BI Publisher Templates for Use with Oracle XML-based US Payroll Reports (Doc ID 783942.1)
Cheers,
Vignesh -
Getting VFS manager for client EED_diarough_D failed: Activity report (get
Hi,
I'm using NW 2004s SP9. While trying to check in the activities in NWDI from NWDS I'm geting the following error messege:
" Getting VFS manager for client EED_diarough_D failed: Activity report (get open activities for current repository and user) failed: Internal Server Error"
Can you please help to resolve this issue.
Regards,
SubhayuNetWeaver Sneak ... SP 16: table PVC_ACTVERSVIEW missing i got answer from this.
Had to redeploy sda and it solved all probs .it was the prob with WAS... -
Can any one clarify that check writer and check writer(xml) concurrent programs that are used for payroll check printing are same? if not when should we use check writer and when should we use check writer(XML)? (why i am asking these because concurrent program short name which is the code for data definition and template are not same,but the data definition name( Check Writer XML) is same for template(Check Writer for US))
To Enable check writer(XML) i gone through some setups in oracle support should that be performed to use check writer(XML) instead of check writer? and finally to customize my check template where can i get the XML DATA ? Any replies will be appreciated thanks in advance.There are several documents on Metalink that provide the steps necessary for using CheckWriter(XML). Basically, the CheckWriter and the CheckWriter(XML) programs are the same however the XML program runs through the Oracle provided data definitiion and xml template to produce the PDF output.
When you run the Check Writer (XML) program you will find two programs in the Concurrent Request window. The PDF output from the template will generate from the 1st program and the XML data that is used to generate is found in the 2nd program. You can copy the seeded Oracle XML check template and rework it to fit your organizations requirements.
~RL -
Central build fails when checking in an activity
I have a web dynpro application that uses a javabean as model. The javabean has several properties that are of type collection that are mapped to DTOs that consist of simple types. I had to add a new simple type (integer) to one of the DTOs and made the same change in web dynpro by adding the integer property to the appropriate model class.
I did a reload + rebuild in web dynpro, dragged the new model attribute from the model to the component controller and added the attribute to my view. I then did a DC build and then a DC deploy and the application works. I can retrieve, update and add values from the database with the new field.
When I go to check my activity in, the central build fails and the failure is related to the new attribute that was added. Im wondering in the problem is related to problems with the NWDI server, as it was restarted several times this week while I had my activity open.
When I browse to the dev/inactive branch in the DTR, I can see the new attribute that was added to JobPartDTO.java class in the DTO DC and I can see the new attribute that was added to the JobPartDTO.wdmodelclass in the web dynpro DC. In the dev/active branch, theses changes are not present.
Here are the errors from the CBS log.
[echo] Starting Java compiler
[javac] Compiling 73 source files to /usr/sap/DJD/JC50/j2ee/cluster/server0/temp/CBS/eb/.B/10398/t/E63CF921E07C342BC77B3BB9E227D7A8/classes
/usr/sap/DJD/JC50/j2ee/cluster/server0/temp/CBS/eb/.B/10398/t/E63CF921E07C342BC77B3BB9E227D7A8/gwd/packages/com/company/dev/jsets/wdp/wdp/IPublicJobSetsComp.java:12771: cannot resolve symbol
symbol : method getOperSeqNo ()
location: class com.company.dev.jsets.dto.JobPartDTO
return gen_modelInstance.getOperSeqNo();
^
/usr/sap/DJD/JC50/j2ee/cluster/server0/temp/CBS/eb/.B/10398/t/E63CF921E07C342BC77B3BB9E227D7A8/gwd/packages/com/company/dev/jsets/wdp/wdp/IPublicJobSetsComp.java:12779: cannot resolve symbol
symbol : method setOperSeqNo (int)
location: class com.company.dev.jsets.dto.JobPartDTO
gen_modelInstance.setOperSeqNo(value);
^
/usr/sap/DJD/JC50/j2ee/cluster/server0/temp/CBS/eb/.B/10398/t/E63CF921E07C342BC77B3BB9E227D7A8/gwd/packages/com/company/dev/jsets/wdp/wdp/IPublicJobSetsComp.java:12791: cannot resolve symbol
symbol : method getOperSeqNo ()
location: class com.company.dev.jsets.dto.JobPartDTO
return new Integer(gen_modelInstance.getOperSeqNo());
^
/usr/sap/DJD/JC50/j2ee/cluster/server0/temp/CBS/eb/.B/10398/t/E63CF921E07C342BC77B3BB9E227D7A8/gwd/packages/com/company/dev/jsets/wdp/wdp/IPublicJobSetsComp.java:12808: cannot resolve symbol
symbol : method setOperSeqNo (int)
location: class com.company.dev.jsets.dto.JobPartDTO
gen_modelInstance.setOperSeqNo(((Number)value).intValue());
^
/usr/sap/DJD/JC50/j2ee/cluster/server0/temp/CBS/eb/.B/10398/t/E63CF921E07C342BC77B3BB9E227D7A8/gwd/packages/com/company/dev/jsets/wdp/wdp/IPublicJobSetsComp.java:12820: cannot resolve symbol
symbol : method getOperSeqNo ()
location: class com.company.dev.jsets.dto.JobPartDTO
return gen_modelInstance.getOperSeqNo();
^
/usr/sap/DJD/JC50/j2ee/cluster/server0/temp/CBS/eb/.B/10398/t/E63CF921E07C342BC77B3BB9E227D7A8/gwd/packages/com/company/dev/jsets/wdp/wdp/IPublicJobSetsComp.java:12829: cannot resolve symbol
symbol : method setOperSeqNo (int)
location: class com.company.dev.jsets.dto.JobPartDTO
gen_modelInstance.setOperSeqNo((int)value);
^
/usr/sap/DJD/JC50/j2ee/cluster/server0/temp/CBS/eb/.B/10398/t/E63CF921E07C342BC77B3BB9E227D7A8/gwd/packages/com/company/dev/jsets/wdp/JobSetsComp.java:3052: cannot resolve symbol
symbol : method setOperSeqNo (int)
location: class com.company.dev.jsets.dto.JobPartDTO
dto.setOperSeqNo(operSeqNo);
^
7 errorsThe problem has fixed itself! I made some new additional changes to my DAO and EJB and checked in my activity. This detected all the predecessors activities and central build was successful, even in the CMS!
-
Getting VFS manager for client J2E_iom_D failed: Activity report (get open
Getting VFS manager for client J2E_iom_D failed: Activity report (get open activities for current repository and user) failed: Internal Server Error
I cannot sync with dtr and moreover the tracks which i deleted still shows up in DTR folder and i am not bale to delete it.
Please help....
GeorgeNetWeaver Sneak ... SP 16: table PVC_ACTVERSVIEW missing i got answer from this.
Had to redeploy sda and it solved all probs .it was the prob with WAS... -
Crystal Reports 2011 IDE fails to save active report
Hi,
I've been using CR 2011 to update some previous versions of CR. When I go to save the report 9 out of 10 times it fails to save the active report file and turns the report into a .tmp file. I then have to save the report back to a .rpt file and it is fine and the report still works. But this is driving me nuts. To have to keep on saving as after the IDE fails.
Anyone have any help/suggestions on this.
Thanks,
Jimhi Jim,
are you using crystal reports for visual studio as the IDE? if so, please repost your question here.
if not (i.e. you are using crw32, the regular crystal reports designer tool), please ensure that you've got the latest sp installed from here. after that, if you still experience the problem please provide a link to one of your reports (e.g. in dropbox) with saved data so that it can be tested by someone else on their version of cr.
thanks,
jamie -
Attempted to read or write protected memory followed by Load Report Failed
After running OK for some time ASP.NET web application (VS 2008 .NET 3.5 with Crystal Reports included) running on MS WIN 2003 R2, SP2) will throw error when trying to create PDF crystal report. Error reads as follow:
Attempted to read or write protected memory. This is often an indication that other memory is corrupt. - at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Close() at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.InternalClose(Boolean bSetupForNextReport, Boolean bAutoClose) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Dispose(Boolean bDisposeManaged) at System.ComponentModel.Component.Dispose() at CrystalDecisions.CrystalReports.Engine.ReportDocument.InternalClose(Boolean bSetupForNextReport) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Close()
After that every consecutive attempt to create another PDF crystal report will fail with fallowing error:
Load report failed. - at ... at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Once Application pool is recycled, error goes away but comes back after while. It seems that recently the uptime is getting shorter.
Anyone had similar experience, posible solution?
Thanks in advance,
MiroHi Miro,
Clean Temp folder of that machine.
For testing export report to PDF format from designer do you face any issue?
Try to export the report with following line of code :
CrystalDecisions.CrystalReports.Engine.ReportDocument boReportDocument;
CrystalDecisions.ReportAppServer.ClientDoc.ISCDReportClientDocument reportClientDoc;
boReportDocument = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
boReportDocument.Load(Server.MapPath("FinalActivityRpt.rpt"));
reportClientDoc = boReportDocument.ReportClientDocument;
boReportDocument.SetDatabaseLogon("sa", "sa");
CrystalReportViewer1.ReportSource = boReportDocument;
ExportOptions exportOptions = new ExportOptions();
exportOptions.ExportFormatType = CrReportExportFormatEnum.crReportExportFormatPDF;
PDFExportFormatOptions pdfOptions = new PDFExportFormatOptions();
pdfOptions.StartPageNumber = 1;
pdfOptions.EndPageNumber = 3;
exportOptions.FormatOptions = pdfOptions;
Response.AddHeader("Content-Disposition", "filename=" + "untiteled" + ".pdf");
Response.ContentType = "application/pdf";
Response.BinaryWrite((Byte[])reportClientDoc.ReportSource.Export(exportOptions, new RequestContext()));
Response.End();
Regards,
Shweta -
Check writer process (PAYROLL) really slow
Hi All
Does anyone have any tips on speeding up the check writer process. I have already used and applied the CBO document for HRMS. I am looking for more tips to speed up the check writer process. It now takes 11 hrs to process 50,000 employee checks.
Thanks
Eddie LufkerYou just need to change the output type of the concerned concurrent program to XML.
--Shiv -
Scheuled report failing intermittently With Permission Error
Hello,
A scheduled custom report fails some days. The user has permission to both run and schedule the report. There is no problem to view the reports neither to set up the schedule. And the schedule often runs ok, just every now and then it fails with following error.
errdetail=oracle.apps.xdo.servlet.scheduler.ProcessingException\: Job execution failed because the user who scheduled this job has no more permission or priviledge to run the job. [REPORT_URL]\=[/*********.xdo], [USERNAME]\=[USERNAME]\r\n\********(XDOJob.java\:356)\r\n\tat org.quartz.core.JobRunShell.run(JobRunShell.java\:195)\r\n\tat org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java\:520)\r\nI saw a related document in metalink [ID 1330421.1] but it mentions about sharing the scheduler bertween two instances which I am not sure what that means. I have also checked following forum but for that user the failuer is permanent unlike in our case where its random.
Schedule problems
We are currently on;
Standalone Oracle BI Publisher 10.1.3.4
Windows 2003
Using LDAP (MS Active Directory) as a Security Model
Thanks for your help.After we restarted the services, the issue went away. (very strange)
-
"Load Report Failed" Error after upgrading to CR XI R2 and VS 2005
Previously I had visual studio 2003 and crystal report XI and on my website project and I have this function where users can download their monthly statement. and it was working fine. here is my code of the function...
Private Sub cmdStatement_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdStatement.Click
Dim pReport As New ReportDocument
pReport = New ReportDocument()
Try
'Dim pTable As Table
pReport.Load(Server.MapPath(".") & "\reports\MonthlyStatement.rpt")
pReport.SetDatabaseLogon(dbUser, dbPassword, dbServer, dbDatabase)
pReport.RecordSelectionFormula = "{CCMSC.CID}='" & mCID & "'"
Dim pArray() As String =
DataAccess.SqlPublic.ExecuteDataset(cnString, "webDownloadEStatement", pArray)
Response.ClearContent()
Response.ClearHeaders()
Response.ContentType = "application/pdf"
pReport.ExportToHttpResponse(CrystalDecisions.[Shared].ExportFormatType.PortableDocFormat, Response, True, "DebtHelper_" & mCID & "_MonthlyStatement")
pReport.Dispose()
Catch ex As Exception
divMessage.Visible = True
lblMessage.Text = ex.Message
Finally
pReport.Dispose()
End Try
End Sub
Now, recently I upgraded my crystal to CR XI Release 2 SP6 and also upgraded my web project to Visual Studio 2005 with .NET 2.0. and now it gives me "report load failed" error on the very first line pReport.Load(......)
The project has updated the references related to crystal reports to the 11.5 version from 11.0. Not sure what am I missing here.
I have also opened the report file in the new crystal and saved it. I also opened it in Visual Studio itself and saved it.
I would appreciate any help possible.
Thanks
RajHi! Ludek,
I have tried to hard code the path. I checked the win/temp folder and the aspnet account already has the read/write permissions.
Below is the detailed error message:
Error Message: Load report failed.
Page Error Occurred: /MyDebthelper/reports.aspx
ExceptionType: System.Exception
Inner Exception: System.Runtime.InteropServices.COMException (0x800001F5): The Report Application Server failed at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options) at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
Stack Trace: at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened() at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob) at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename) at MyDebthelper.reports.cmdStatement_Click(Object sender, EventArgs e) in C:\Documents and Settings\RBhavsar\My Documents\Visual Studio 2005\Projects\MyDebtHelper\MyDebthelper\reports.aspx.vb:line 83 at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Thanks
Raj
Edited by: debthelper on Apr 30, 2010 5:21 PM -
Activity report does not seem to work
Hello,
We have a EP based on NW2004s Support Package Stack 10. The properties of the activity report are set so that the report is activated. When I look at the statistics within the activity report, the last aggregation is about a month ago and there is not data displayed for the current day. From the documentation I have learned that there is not other configuration necessary in 7.00 (in 6.40 you had to configure the aggregation separately). What could be the cause of the data not being displayed and not being aggregated? I have restarted the application a number of times, but to no avail. The entire portal has also been restarted in the mean time, but the situation stays the same.
Best regards, WilbertHi Wilbert,
If your landscape is a clustered landscape, please verify that all servers have their time synchronized.
The background is as follows: The aggregation runs through a temp DB table and aggregates all timestamps to an hourly timestamp (into a different DB table, deleting the corresponding entries in the first table). If two servers are out of synch, one server may write an entry with a timestamp of the hour which should have been aggregated before. In this case, the next aggregation tries to create a new aggregated entry for the hour in question, but fails, as such an entry already exists. The problem is, that with this exception, the whole aggregation process stops.
To overcome this problem, you will have to delete the "overlapping" entries in one of the two tables in question. I could provide more infos if you say "time synch in fact was an issue"...
Hope it helps
Detlev -
Crystal Report Error in Windows Server 2012 - Load Report Failed
Badly needed help regarding the above topic. Thanks in advance for helping.
We have a web application experiencing this error after deployment in WinServer 2012 IIS 8. Previously, the application was deployed in WinServer 2003 but we dont experience any errors like this. We tried searching the net for solutions and these are the following things we've try doing so far.
- Installed Crystalreportsviewer13 64 bit in Server. After that, transferred the asp_net client folder in the IIS folder same level of our application.
- We discovered that upon browsing the asp_net client in IIS itself, error 500.24 is appearing in the server. Checked the permission for folder asp_net client. Add IIS_USR permission read execute and write on the folder and still same Load Report Failed.
- Next we tried integrating the crystalreportsviewer13 inside the application same Load Report Failed error.
- Installed Service Pack 8 for CrystalReport but to no avail.
Is there any way to get the real error behind the "Load Report Failed" error? Also, is there any other way to determine what else can be done to resolve this issue? Thanks in advance.Hi Jesse,
Use a try/catch block and see if this gives you more info:
catch (Exception ex)
MessageBox.Show("ERROR: " + ex.Message + " ;" + ex.InnerException.Message);
Response.write of course...
Make sure you have permissions set for sharing the report folder also, could be simply a permission error on the report folder.
Fiddler may give you more details also
Don
Maybe you are looking for
-
Please someone help... I updated Itunes a while ago from 9. something to 10.3 When i did this my computer usage went to 100% and basically froze. The only way to get computer working was to end tasks and processes in task manager. I uninstalled itune
-
Apple Monitor doubles as a space heater
Hi, Just got a 23" apple monitor and you could use it as a space heater. Had it on for about 2 hours and the thing gets hot, Real hot.... Is this normal.... Seems to work fine but it does get hot... Thanks Dave
-
New version of EW PLAY available
For anyone using any of the new eastwest libraries, they have finally released version 2 of their PLAY plugin. Memory use is much improved on my system although some other Logic users have seen no improvement or worse. I'd recommend keeping the old 1
-
How can I preserve Client IP address?
I am configuring the ACE for bridged mode. However, the real server is seeing VIP IP but not Client IPs. Our business requires that the real server must see client IPs. Do you have any idea how to set that up? I tried to turn ON/OFF normalization but
-
Inserting blank pages into an existing document
I'm new to Pages. I'm creating my first document, which involves text and photos. It's presently a 5 page document. I'd like to insert two new blank pages right after existing page 3 (for items that I don't have yet but will in the next day or so), b