Checkbox checked for a particular rowid

Hi,
I'm using APEX 4.1
I have a page with checkboxes (Interactive Report Page) and a DML Form page for creating/editing lines.
I check one record, and press a button that open that DML Form page.
When I'm returning to the first page, I want that record checked by default.
Source of ReportPage is:
SELECT
APEX_ITEM.CHECKBOX(1, ROWID, null) chk,
col1,
col2,
ROWID
FROM table
What is the JavaScript code to check that column again (based on rowid selecetd before) on returning to the Interactive Report Page?
Thx in advance,
Rad.

Hi Scott,
This checking should happened only if a specific button is pressed.
So, on Report Page I choose a line, press that button and memorize rowid in a page or an application variable.
DML Form is opened, then I close it and return to the Report Page. I need that line (having that rowid) to stay checked.
I should define another column, then for that rowid I should update the value of that column, and then check or uncheck records based on column values when page loading?
I'm a newbie and I don't find where to put your code.
Rad.

Similar Messages

Bypass material D-Chain specific status check for a particular order type

Hello All,
For a material, I want to by-pass it's D-Chain specific status check for a particular order type.
Currently when you enter the that material in the order, I am getting warning: Material XYZ has status: ABC hold
I want to py-pass this warning message, how to do this? Can we configure this based on order type??
Pls. help me.
Thanks,
Shreekant

Hi Kapil,
Threre are some material for which D-Chain status ( MVKE-VMSTA) in the materila master are set in such a way so that deliveries can not be created. We need to bypass this restriction for couple of delivery types. One of them is the delivery type used for intracompany STO.
I am looking for some way out like user exit so that I dont need to change existing config change for those statuses.
Regards,
Subhankar

Prodn Or Mtrl Avail check for a particular Stor Locn ONLY

Hi,
I have a scenario, wherein ther are 2 Stor Locn
FG01 (finish goods)
RJ01 (rejected goods)
There is a prodn order being created for a particular material which consumes materials from RJ01 "ONLY".
How can I set the Mtrl Avail check in Production order execution such that it ignores all the other Stor Locn and does the ATP Check for RJ01 locn ONLY.
Thanks in advance,
Harris

Hi,
In the definition of scope of check for that checking group and rule (transaction OVZ9) make sure that the flag of "no storage location inspection is NOT SET.
... and of course that there's a storage location definition in the production order component.
Regards,
Mario

Authority-check for a particular company code

Hi,
   I need to check authorization for a particular company code.In my bdc call transaction program i'm fetching mass data from excel file and for every record i've to check the company code field.If the company code is not the required one then that record should not be processed.
So before filling the bdc data i wrote like
LOOP AT gt_inrec INTO gs_inrec.
     AUTHORITY-CHECK OBJECT 'F_BKPF_BUK'
               ID 'ACTVT' field '02'
               ID 'BUKRS' field '2800'.
    IF NOT sy-subrc = 0.
      MESSAGE e058(zz) WITH gs_inrec-bukrs.
      EXIT.
    ENDIF.
     PERFORM fill_bdc.
ENDLOOP.
but it is not exiting for different company codes and is allowing records with all company codes.
can anybody pls tell me how to rectify this?
thanks in advance,
poornima

I need to perform authority check on the field NAME1 present in the standard screen - customer master ( T.Code-XD02). Only certain users should be allowed to edit the field and others should be restricted.
I have created a field exit FIELD_EXIT_AD_NAME1 for the ADRC-NAME1 field.
Now inside this field exit i need to write the authority-check code.
I have created the authorisation object Z_KNA1_NAM for the field NAME1 using the SU20 and SU21.
For this scenario how do i write the authority-check code in my field exit?
Below is my field exit code,is that correct?
FUNCTION FIELD_EXIT_AD_NAME1.
""Local Interface:
*" IMPORTING
*" REFERENCE(INPUT)
*" EXPORTING
*" REFERENCE(OUTPUT)
AUTHORITY-CHECK OBJECT 'Z_KNA1_NAM'
ID 'NAME1' FIELD SY-UNAME
ID 'ACTVT' FIELD '03'.
IF SY-SUBRC = 0.
MESSAGE 'Not Allowed to Edit the Name 1 Field' TYPE 'E'.
ENDIF.
ENDFUNCTION.
In the above code i have given SY-UNAME in the code line 2 - ID 'NAME1' FIELD SY-UNAME ,is that correct? what should i give there?
Please help me on this issue.
Cheers,
P.S.Chitra

Exclude availability check for a particular stor. loc.

Hi,
I need to exclude a stor. loc. for availability check. MRP should not be excluded.
How can I do that?
Thanks in advance.
Sonal

Hi ,
For exclude the storage location from availability check plz follow the below
1. Go to transaction OPPJ
2.Select Determine Check
3.Select the availability type which you use and go to details
4.There you can find the Storage location check tab
5.put the check mark in No Storage location inspection and save.
So that the storage location will not be included.
Hope it will clear you.
Regards,
Vijay.

How to restrict Availability check for a particular storage location

Dear all,
As per the Business requirement, System should not consider the stock in a particular storage location.
while sales order creation, system should not confirm the requested delivery date based on the stock available in that particular storage location.
How could we map this requirement in SAP, Please educate me to resolve this issue. Your suggestions will be highly appreciated.
Thank you,
Raghu Ram.

Dear Lakshmipati,
as you said correctly this storage location is there in MMSC for the article which we are using in Sales Order.
I have tried to delete this storage location but system is not allowing to do so.
I could not understand, from where this storage location is being determined. we have not mentioned any where in article master data.
please help us to resolve this issue, and thanks for your help in advance.
thank you
Raghu Ram

Restrict Availability check for Line item in sales order

Hi Folks,
My requirement is some what different than the usual,I want to stop availability check for a particular line item,while creating sales order on a particular condition (example when quantity is changed for that line item),please suggest if there is any way to do so.
Thanks for your valuable support.

Hi
we need to maintain the username of the person who has triggered this process through XI .
I BAPI we cannot instruct the BAPI to maintain a specific username.
that is why i am using this FM because this will allow us to maintain the change history with the username we want
Regards
Nikhil

How to make "check for multiple logons" mandatory in webdynpro application.

Hi SDN members,
Im having a problem with an application developed in webdynpro abap.
We require that end-user only have a session per computer (ip address),
I already tried to achieve this by configuring the webdynpro application throguh SICF and going to Error Pages -> Logon Errors --> System Logon and mark the checkbox Check for multiple logons.
This configurations give only a warning when the user logs multiple times, and show a checkbox letting the user decide to end or not the previous sessions.
How to make end previuos sessions mandatory ??
Regards,
Franklin Cedillo

You would have to enforce this at the application level. You can get the IP address of the current client from the framework - IF_WD_APPLICATION method GET_REMOTE_ADDRESS.
You could write an entry with the IP address into a temporary table during WDDOINIT. You could clear the entry in the WDDOEXIT. Also during the WDDOINIT, check to see if there is already an entry for this IP address. If so, then fire an exit nagivation plug to a static MIME object or BSP page that explains why the user can only be logged in once.

Authorization check for plant

Guys,
I need to creat an authorization object with field Plant
In my user exit I need to check for that particular plant , if authorized proceed else exit.
how can achive this.
Please provide me the Step by step procedure.
Appropriate answers willb e rewarded.
Thanks in advance

created one field in su20(ZWERKS)
Not ZWERKS it should be WERKS .here save your efforts.
in aurthorization tab>change aurthorization data>selected sap_all
saved generated
selected sap_all
saved generated this is wrong also from change aurthorization data here you must select all plant values except 3AA0.
and make sure in aurthorization tab green light should be there after generate.cause in this process this screen bit buggy.
Update:from SU21 you must create both Authorization object and class from create button(drop down).and make sure in Authorization object you assing the both class and field(werks which you already created in su20)

Authorization check For T code

Hi everyone,
Can anybody guide to set a authorization check for a particular Tcode.
I have ztable where users are assigned particular numbers.
I want the users who are assigned some numbers should be able to use this particular t code
Thanks in advance

hi
chk this out
AUTHORITY-CHECK
Basic form
AUTHORITY-CHECK OBJECT object
    ID name1 FIELD f1
    ID name2 FIELD f2
    ID name10 FIELD f10.
Effect
Explanation of IDs:
object
Field which contains the name of the object for which the authorization is to be checked.
name1 ...
Fields which contain the names of the
name10
authorization fields defined in the object.
f1 ...
Fields which contain the values for which the
f10
authorization is to be checked.
AUTHORITY-CHECK checks for one object whether the user has an authorization that contains all values of f (see SAP authorization concept).
You must specify all authorizations for an object and a also a value for each ID (or DUMMY).
The system checks the values for the IDs by AND-ing them together, i.e. all values must be part of an authorization assigned to the user.
If a user has several authorizations for an object, the values are OR-ed together. This means that if the CHECK finds all the specified values in one authorization, the user can proceed. Only if none of the authorizations for a user contains all the required values is the user rejected.
If the return code value in SY-SUBRC is 0, the user has the required authorization and may continue.
The return code value changes according to the different error scenarios. The return code values have the following meaning:
4
User has no authorization in the SAP System for such an action. If necessary, change the user master record.
8
Too many parameters (fields, values). Maximum allowed is 10.
12
Specified object not maintained in the user master record.
16
No profile entered in the user master record.
24
The field names of the check call do not match those of an authorization. Either the authorization or the call is incorrect.
28
Incorrect structure for user master record.
32
Incorrect structure for user master record.
36
Incorrect structure for user master record.
If the return code value is 8 or 24, inform the person responsible for the program. If the return code value is 4, 12, 16 or 24, consult your system administrator if you think you should have the relevant authorization. In the case of errors 28 to 36, contact SAP because authorizations have probably been destroyed.
Individual authorizations are assigned to users in their respective user profiles, i.e. they are grouped together in profiles which are stored in the user master record.
Note
Instead of ID name FIELD f, you can also write ID name DUMMY. This means that no check is performed for the field concerned.
The check can only be performed on CHAR fields. All other field types result in 'unauthorized'.
Example
Check whether the user is authorized for a particular plant. In this case, the following authorization object applies:
Table OBJ: Definition of authorization object
M_EINF_WRK
   ACTVT
   WERKS
Here, M_EINF_WRK is the object name, whilst ACTVT and WERKS are authorization fields. For example, a user with the authorizations
M_EINF_WRK_BERECH1
   ACTVT 01-03
   WERKS 0001-0003 .
can display and change plants within the Purchasing and Materials Management areas.
Such a user would thus pass the checks
AUTHORITY-CHECK OBJECT 'M_EINF_WRK'
    ID 'WERKS' FIELD '0002'
    ID 'ACTVT' FIELD '02'.
AUTHORITY-CHECK OBJECT 'M_EINF_WRK'
    ID 'WERKS' DUMMY
    ID 'ACTVT' FIELD '01':
but would fail the check
AUTHORITY-CHECK OBJECT 'M_EINF_WRK'
    ID 'WERKS' FIELD '0005'
    ID 'ACTVT' FIELD '04'.
To suppress unnecessary authorization checks or to carry out checks before the user has entered all the values, use DUMMY - as in this example. You can confirm the authorization later with another AUTHORITY-CHECK

Is there any way to force a Role Check for authorization from a Ztable

Hi all,
I have an issue that deals with Authorization check using a role. I have to know if there is any way to make a Role force to check if an entry exists in a Ztable.
Eg. A User is assigned a role Z:Ztable_check. Can we now force this Role to somehow check for a particular entry in a Ztable which has a Username and its Corresponding Authorized Cost center. Can the role check from the Ztable and allow the user to view only those cost centers that he is allowed to.
Don't know if this is even theoretically possible.

hi
see if this helps you
<b>The SAP Authorization Concept
Authorization checks are a means of protecting functions or objects in the R/3 System. The programmer of the function determines where and how these checks are made, while the user administrator determines (within the framework defined by the programmer) who can execute a function or access an object.
The terms central to the SAP authorization concept are:
Authorization field
This is the smallest unit against which checks can be made. The programmer can create authorization fields by selecting Tools → ABAP Workbench → Development → Other tools → Authorization objs → Fields.
Example: ACTVT and CUSTTYPE.
Authorization object
An authorization object groups together 1 to 10 authorization fields which can then be checked as a combination. The programmer can create authorization fields by selecting Tools → ABAP Workbench → Development → Other tools → Authorization objs → Objects.
Example: The authorization objekt S_TRVL_BKS groups together the authorization fields ACTVT and CUSTTYPE.
Authorization
An authorization is a combination of permitted values for each authorization field of an authorization object. The user administrator creates authorizations by selecting Tools → Administration → Maintain users → Authorization.
Example:
S_TRVL_CUS1 is an authorization for the authorization object S_TRVL_BKS with the values
for customer type (CUSTTYPE) and
02 for activity (ACTVT).
Users who have this authorization are allowed to change the bookings of all customers.
S_TRVL_CUS2 is an authorization for the authorization object S_TRVL_BKS with the values
B for customer type (CUSTTYPE) and
03 for activity (ACTVT).
Users who have this authorization are allowed to display the postings of all customers.
Authorization profile
An authorization profile represents a simple workplace in the context of authorizations. An authorization profile contains authorizations for the authorization objects a user needs to operate effectively in a restricted task area. The user administrator creates authorizations by selecting Tools → Administration → Maintain users → Profiles.
User master record
Your user master record is checked when you logon to the R/3 system. Through the authorization profiles, this provides restricted access to the functions and objects of the R/3 System. The user administrator creates authorizations by selecting Tools → Administration → Maintain users → Users.
Authorization check
The programmer can perform authorization checks with the ABAP command AUTHORITY-CHECK by specifying the value to be checked for each authorization field defined. The system then scans the profiles in the user master record for the authorizations specified. If one of the authorizations found for all fields of the authorization object covers the values specified by AUTHORITY-CHECK, the check was successful.
Example: Check whether the user is allowed to change the postings of business customers:
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
                ID 'ACTVT'    FIELD '02'
                ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
If the authorization S_TRVL_CUS1 exists in the user's master record, the authorization check is successful. However, if the authorization S_TRVL_CUS2 exists, but not the authorization S_TRVL_CUS1, the check fails.
Authorization assignment
The system administrator is responsible for assigning user master records with the correct authorizations. You should use the Profile Generator to maintain authorization profiles. However, you can also change them manually. Each authorization object contains authorizations. These are grouped together in authorization profiles such that each authorization profile represents a job description, for example 'flight reservations clerk'. You assign one or more authrization profiles to each user master record. You can assign an authorization to as many authorization profiles as you like, and an authorization profile to as many composite profiles and users as you like. Composite profiles are used in manual authorization maintenance, and form a further division in the authorization structure. However, they are not strictly necessary.
                  User master record
                Auth. profile Composite auth. profile
           Authorization              Auth. profile
             Values              Authorization
                               Values</b>
plz reward if satisfied

How to Disable CheckBox for a Particular Condition

Hi All,
In my application, iam using one table having 5rows , with checkboxes,
based on one condition i want to make few checkboxes as default disable in the same table, and some checkboxes i shud make it as enable, so experts please help me how to disable some checkboxes.
disable means even if we select it shud not get selected, like that is it possible,

Hi Sushma,
You can have one more attribute in the same node from where you are populating the table and bind this boolean attribute to the enabled property of your CheckBox.
and by looping thriugh the table you can check for conditions and based on it set the Enability of the checkbox.
for (int iRowsCount =0;iRowsCount < wdContext.node<name>().size();iRowsCount++)
if (condition)
// Disabling the Checkbox based on the condition
wdContext.node<name>().get<name>ElementAt(iRowsCount).set<BooleanAttributeName>(false);
Hope this helps!!
Cheers,
Arafat

How to check PSA data size for a particular datasource

Hi All,
Please let us know how to check the size of a PSA for a particular datasource in BI 7.0.
But i am using DB02OLD transaction code to identify the size of the change log table or active table of a DSO.

Hi,
I'm not sure but i think that with the tablename you can find the size in the DB02.
To know the PSA Tablename, double click on datasourse > go to > Tecnical attributes
There you have the name of the PSA Table.
Regards,
Dani

Authority-check for particular comp code

Hi All,
when i'm using standard Authority Object F_BKPF_BUK for a particular standard code say 'CO01'. but it is working for all company code, but i want work for only one company code say 'CO01' ONLY.i'm using in report program (zreport prog)
I written code as
AUTHORITY-CHECK OBJECT 'F_BKPF_BUK'
ID 'BUKRS' FIELD 'BE10'
ID 'ACTVT' FIELD '03'.
Please can u advice on this .
Many Thanks in Advance for u r Answer
Naren

Hi
In general different users will be given different authorizations based on their role in the orgn.
We create ROLES and assign the Authorization and TCODES for that role, so only that user can have access to those T Codes.
USe SUIM and SU21 T codes for this.
Much of the data in an R/3 system has to be protected so that unauthorized users cannot access it. Therefore the appropriate authorization is required before a user can carry out certain actions in the system. When you log on to the R/3 system, the system checks in the user master record to see which transactions you are authorized to use. An authorization check is implemented for every sensitive transaction.
If you wish to protect a transaction that you have programmed yourself, then you must implement an authorization check.
This means you have to allocate an authorization object in the definition of the transaction.
For example:
program an AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT <authorization object>
ID <authority field 1> FIELD <field value 1>.
ID <authority field 2> FIELD <field value 2>.
ID <authority-field n> FIELD <field value n>.
The OBJECT parameter specifies the authorization object.
The ID parameter specifies an authorization field (in the authorization object).
The FIELD parameter specifies a value for the authorization field.
The authorization object and its fields have to be suitable for the transaction. In most cases you will be able to use the existing authorization objects to protect your data. But new developments may require that you define new authorization objects and fields.
http://help.sap.com/saphelp_nw04s/helpdata/en/52/67167f439b11d1896f0000e8322d00/content.htm
To ensure that a user has the appropriate authorizations when he or she performs an action, users are subject to authorization checks.
Authorization : An authorization enables you to perform a particular activity in the SAP System, based on a set of authorization object field values.
You program the authorization check using the ABAP statement AUTHORITY-CHECK.
AUTHORITY-CHECK OBJECT 'S_TRVL_BKS'
ID 'ACTVT' FIELD '02'
ID 'CUSTTYPE' FIELD 'B'.
IF SY-SUBRC <> 0.
MESSAGE E...
ENDIF.
'S_TRVL_BKS' is a auth. object
ID 'ACTVT' FIELD '02' in place 2 you can put 1,2, 3 for change create or display.
The AUTHORITY-CHECK checks whether a user has the appropriate authorization to execute a particular activity.
This Authorization concept is somewhat linked with BASIS people.
As a developer you may not have access to access to SU21 Transaction where you have to define, authorizations, Objects and for nthat object you assign fields and values. Another Tcode is PFCG where you can assign these authrization objects and TCodes for a profile and that profile in turn attached to a particular user.
Take the help of the basis Guy and create and use.
Reward points if useful
Regards
Anji

How to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word

how to check the usage of ram and cpu Performance for the particular application like sqlserver ,ms word
ranki

Hi,
You can use Performance Monitor and add the required counters.
Check the below Technet article on Performance Monitor.
http://technet.microsoft.com/en-us/library/cc749249.aspx
Below are the steps to monitor the process in Performance Monitor.
- Go to the Performance Monitor.
- Right-click on the graph and select "Add Counters".
- In the "Available counters" list, open the "Process" section by clicking on the down arrow next to it. Select "% Processor Time" (and any other counter you want).
- In the "Instances of selected object" list, select the process you want to track. Then click on "Add >>" button. Click on OK.
Regards,
Jack
www.jijitechnologies.com

Checkbox checked for a particular rowid

Similar Messages

Maybe you are looking for