Checkbox Component Issue

Hey guys,
I have a quite strange problem, something that I wasn't able to find information on by searching using google. In my flash project I have several checkbox components spread across different frames, the user can switch between frames using buttons. Anyways the issue I am seeing is when the user switches between these different frames, the checkbox components are never in the correct place... almost looks like they are glitching out, its almost random each time I rebuild and test the .swf. Any ideas of what might be causing this? These checkboxes are just standard with no label and no instance name...
Here are a few screenshots...
This is how it appears in the editor (correctly)
at runtime this happens:
Sometimes its has even crazier placement when i switch to the frame with these checkboxes. Anyways might be something weird I am doing, but the weird thing is its pretty random how it places them, so I feel like its possibly a bug of some sort?

If you are placing the checkboxes in adjacent frames, and copying instances from one frame to the next, then you can end up with a situation where the checkboxes inherit properties, such as position and status from their instances in preceding frames. You can get around this by spreading them out with blank frames between them, or switching them to different layers from frame to frame.

Similar Messages

Custom component issue

Custom component issue
According to customer requirements, we want to get such an effect in the development of custom components:
Drag and drop custom components to the Flex builder work area, it can generate more than the default properties, not just generate "x", "y" attribute.
【Details are as follows】
We design a custom panel "CustomPanel.mxml" in the project development, then drag it into the workspace in the Flex builder development environment.
View the source code found that it can only generate "x", "y" attribute in default. That is:
<ns2:CustomPanel x="105" y="74">
</ns2:CustomPanel>
【Issue】
How can we do that when drag the 'custom component' into Flex builder workspace, we can generate "layout" attribute in addition to "x", "y" attributes?
That is:
<ns2:CustomPanel x="105" y="74" layout="absolute">
</ns2:CustomPanel>
【Note】
The following code will be generated when the "panel component comes with Flex builder environment" is dragged into workspace.
<mx:Panel x="121" y="134" width="250" height="200" layout="absolute">
</mx:Panel>
How it is done?

I am sorry to bother you again.
I have tried the web site content, but it can't helped!
There is a custom component called 'Basket', source code is as follows:
package picnic
import mx.containers.Panel;
public class Basket extends Panel
public function Basket()
   super();
   layout = "vertical";
   setStyle("backgroundColor", 0x00FFFF);
   setStyle("horizontalAlign", "center");
Here it is worked when the attribute "layout" is set to "vertical", but it isn't when "layout" is set to "absolute" !
When the property is set to "absolute" phenomenon is as follows:
Drag component such as 'Button' into "picnic component". It will automatically go to the top left corner position,
just like the 'layout-attribute' is not set.
Why is there such a phenomenon?

Subcontracting Component Issue Error

HI,
i am creating Sub contracting Purchase order.component qty is issued for unlimited, accepted for PO.
my option is Po Parent qty against Component issued Excess qty not Allowed.
Purchase Order Qty A: 100Pc
Child Qty B : 100PC
Issued qty B :150 Pc is Allowed.
this Child qty are maintained for BOM.
Plz, Explain and Advise the Issue.
By,
Jeevan

Dear,
You can not issue the quanity more than the BOM component quantity with respective to the PO.
Transaction ME2O uses the component quantities from the individual purchase order items. However, it does not set up a stock based on purchase orders (POs). The system therefore does not assign POs directly to quantities either. The evaluation of the SC stock is therefore always a cumulative analysis of all the requirements of a material over time. The "Closing Stock" for each material displays whether there is excess stock or a stock undercoverage at that time, or whether requirements and stock are balanced.
You can set up the SC stock with larger quantities than component requirements exist at that time. This option is often used if, for example, you want to set up buffer stocks for the subcontractor for subcontracting works that frequently recur.
Hop clear to you.
Regards,
R.Brahmankar
Edited by: R Brahmankar on May 19, 2009 12:26 PM

Rollover for checkbox component

I'm working with the CheckBox component for making a quiz.
I've got CB components labeled A, B, C, etc. with a textfield next
to them with the various possible answers. I want to have it so
that the user can rollover or click the answer text to check off
their answers just as if they had hit the tiny little check box.
I've got the checking/unchecking part working. But I would
also like for rolling over the text to provide the same visual
feedback as moving the pointer over the checkbox. And here I run
into a dead end. I can't quite figure out how to do this.
Poking around a bit I found that if I set the checkboxes
phase to rollover and invalidate() it I will see the result I
expect. But I'm not sure if that is causing other problems.
Anybody know the "right" way to do this?

wow rock - i suppose that you don't want to make the field
into a MC and use handlers for every one of them - and I'm betting
that you've built a dynamically propagated system. thought about
skinning them? with the field - seems like you'd have to modify the
base class then though. but I'm not sure how that would work either
- might be able to extend the class to handle text entry into the
field and maybe a glow filter to simulate the halo effect? i don't
know - just throwin stuff out there :)

Negative Component Issue

Hi
It is mentioned in the oracle inventory management material that There are different ways we can receive inventory in to stock: for instance from manufacturing shop floors by :
- Component Return
- Negative Component Issue
- Assembly Return
My question is:
what is "Negative Component Issue" ? and how could it be performed?
Thanks
Walid

HI,
negative component issue is used to issue negative components from job to inventory.
they are normally used in denoting by products that are produced in a job when performing a job, and usually by products are returned to inv from job.
so negative component issue type is used.
is it clear?

SAP R/3 application component issue

Hi all,
My issue: SAP R/3 application component hierarchy node in RSA6 got saved in $TMP package as local object. When iam transporting the request from Dev to QA this hierarchy is not getting transported and all the application components in ECC QA are assigned under not defined node as individual node.
Not only this when i replicate the data sources in BI side in QA these data sources are replicated but come under unassigned nodes because of the missing main node.
So can any body help me in removing this main node from the $TMP folder and save this in a transpotable package to transport that to QA ECC and the same to replicate in BI.
Regards,
Prabhakar.

Hi Markus,
This issue iam facing in ECC side. Unless untill i transport this application component hierarchy all my application components in ECC QA will be under a not defined nodes.
So please suggest me the approach to resolve this issue.
Regards,
Prabhakar.

Ibase/Component issue while creating a message from satillite system

Hi experts,
we have implemented the service desk functionality in solution manager system.
User is able to create message in solution manager directly.
While creating message from a satellite system IBASE/component fields are filled with incorrect values.
Because of this user unable to create message from satillite system.
Has someone any ideas where we do some settings to get correct Ibase/Component values while creating message from satillite system?
Thank you in advance,
Babu

Hi Babu,
For Creating messages in SOLMAN make sure that in T code SM30 under the table BCOS_CUST data is maitained
OSS_MSG W NONE CUST620 1.0
First your should make your solman ready for posting issues within.
Then connect it to ECC systems and try posting issues there.
Do not user Tcode NOTIF_CREATE for posting issues always use HELP- Create Support message.
Thanks
Nand

LOADER COMPONENT ISSUE

I noticed that when using the Loader component in Flash 8 -
the following issue:
I have a thumbnail gallery that uses the Loader component to
view the large image.
when i view the site in fire fox it works perfectly (scaling
the content and centering it within the loader component shape)
but when i view it in IE - no scaling or centering occurs!!??
any idea why this is happening and how i can rectify
it?

Hey why don't you try adjusting the permissions and hot
linking protection on your servers control panel? This might be the
problem.

Import Fail crm 2011 to crm 2013 Legacy component issue

Hi All
We are getting issues during organization import from crm 2011 to crm 2013 , the error is
"We have detected the presence of legacy component(s) during upgrade, these components are not supported in Dynamics CRM 2013. Please refer to upgrade log file C:\Users\Administrator\AppData\Roaming\Microsoft\MSCRM\Logs\LegacyFeatureCheck.xml
for more information."
when we check log file it shows the error "ISV folder under CRM Website contains one or more files"
Even we removed everything from ISV folder , Iframe urls from app , solution which is using ISV urls ,plugins and custom workflows but still the error is same
Please help to resolve this issue .
Thank you
Sharique

Hi,
Please refer below blog having details about "Removal of the 2007 Endpoint and Legacy Features"
http://blog.simonjackson.info/2013/07/whats-changing-in-crm-2013-from-sdk.html
The following legacy Microsoft Dynamics CRM 4.0 features will be removed or will no longer be supported in the next major product release:
ISV folder support for custom web applications
Microsoft Dynamics CRM 4.0 plug-ins
Microsoft Dynamics CRM 4.0 client-side scripting
Microsoft Dynamics CRM 4.0 custom workflow activities
Also you can download a tool that can detect legacy feature on your server
http://go.microsoft.com/fwlink/p/?LinkID=309565
Entire documentation is available at below article.
http://msdn.microsoft.com/en-us/library/dn281891.aspx
Hope this helps.
Ajay Chawla

Mass reversal of one component issued to many production orders

Hello SAP GURUS
One of the common component is issued to many production orders from wrong storage location ie instead of 0002 storage location it got issued from storage location0001,
Is there any way to mass reverse of this common component that got issued to multiple production orders
Thanks & Regards
Himakar Raigir

Dear Himakar,
In my understanding,There is no standard T Code to do this mass reversal.
But in MIGO/MB1A you can do 262 movement to the same storage location from which it was consumed for one single
production order if required or else you have to cancel all the documents using MBST.
Check and revert
Regards
S Mangalraj

Checkbox positioning issue in module pool program screen

Hello All,
I am facing one issue with the checkbox positioning in module pool program.I have designed the screen in 'SAP Signature Theme' and the checkbox position looks fine (while tested the screen in SE80) as shown below.
Test Result from 'SAP Signature Theme':
But the lead has a different theme in his SAP system and he got the below result where the checkbox automatically shifts right with the same code and screen design as shown below.
Test Result from'Enjoy' theme :
Could you please help me resolve this strange issue as soon as possible.
Thanks in advance!!!
Thanks & Regards,
Hafizul

Hi Bhaskar,
Sure , in fact this is has been created by dragging and dropping of the the standard checkbox template availabe in the layout,no custom code has been written for this.
Please find the layout properties for this checkbox below.
P9021-COMPLI_CONF is one character field.
Please let me know if you need any other details on the same.
Thanks & Regards,
Hafizul

Operation subcontracting - excess component issue to vendor

Hi gurus,
Operation subcontracting
Issue of component to operation subcontractor with excess material.
After goods receipt from subcontracting what is the impact at subcontractor vendor stock , costing and financial for excess issue stock.
example
As per BOM component qty (suppose to issue) is 10
After altering in PO issue component qty will be issued 15
At the time of receivable of subcontracting (GRN) where and what is the status of 5 qty?
Regards,
RAM

Do MB1B - Matl Movement Type - 542 w.ref. to P.O(excess 5 qty).
Check stock of subcon. using MBLB.

Jdev 10.1.2 Add Business Component Issue

Error appearing is "Unable to load Business Components. The package xml file is not in the proper package".
Under Jdev 9.0.5.2 you could create a business component then with that item highlighted select 'x' on the navigator toolbar to remove the Business Component from the project (Not erased). To add the same item back into the project you highlighted the package, selected '+' on the navigator toolbar highlighted the Business Component source files then click open then yes.
Under JDev 10.1.2.0.0 doing the same does not work. The business component is correctly removed from the project but there seems to be no way to add it back to the project/package (error above always appears).
Has anybody else seen this issue ?
I am mid-way through a major schema refactor and this is causing a big problem.

Based on the package (see FullName below), the metadata file would be called package.xml in this case.
It is there the Containee entries would be added.
For an Entity Object
<Containee
Name="YourEntityObject"
FullName="com.site.package.YourEntityObject"
ObjectType="Entity" >
</Containee>
For a View Object
<Containee
Name="YourViewObject"
FullName="com.site.package.YourViewObject"
ObjectType="ViewObject" >
</Containee>
where
YourEntityObject
- Name of the entity object business component to be added
(This may be based on a number of seperate files such as YourEntityObject.xml, YourEntityObject.java, YourEntityObjectRow.java etc, depending on options taken at design time).
YourViewObject
- Name of the view object business component to be added
(This may be based on a number of seperate files such as YourViewObject.xml, YourViewObject.java, YourViewObjectRow.java etc, depending on options taken at design time).

Trying to resolve Recursive BOM Component issue in Tcode CO46

Hello,
I am trying to identify the problem component when running CO46 and getting a "Recursive BOM Component" message.
I thought I would try to catch the bad component in the debugger, but I can't seem to find where to put the Breakpoint or identify a field to put a Watchpoint on.
Has anyone else had this issue and were you able to ID the BOM Component that was causing the issue?
Thanks very much for your help.
Andy

Dear all,
I resolved the Issue myself
SPTO and MAST table table has the all the details
Regards,
Gaurav Sood

Problem: CheckBox component into DataGrid

Hello, this is my first post on this forum. This is my
problem:
First, i select a checkbox included into the DataGrid
(populated with DataSet--->XMLConnector), but when i rollover
the mouse on the check component, the checkbox turn off
(deselected) automatically, and the value all time is "undefined";
if i click, the checkbox turn selected (true), but when i rollout,
automatically change to deselected.
I use cellrenderer api to include the chackbox, the column of
the checkbox not need DataSet data.
Please, helpme. Thanxs.
P.D. Sorry, my english isn`t good.

don't use getNextHighestDepth().

Checkbox Component Issue

Similar Messages

Maybe you are looking for