Checkbox in REUSE_ALV_HIERSEQ_LIST_DISPLAY appearing in disabled mode.
Hi
I have created check-box in REUSE_ALV_HIERSEQ_LIST_DISPLAY which is appearing in disabled mode. I want to change it into select-able mode. Please advise.
Hi Manu,
you can set that field editable by making change in field catalog -
wa_fieldcat-edit = 'X'
Regards,
Harsh Bansal
Similar Messages
-
Checkbox in REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hello Freinds,
I need to have checkboxes in both the header as well as the item level data records. I have used the FM REUSE_ALV_HIERSEQ_LIST_DISPLAY for ALV display. But the problem is that the checkbox appears only for header level records and not in item level records.
I have tried to add checkbox through field catalog also. But in that case the checkbox appears in disabled form.
Kindly advice as how can we achieve checkbox for both header and item level records.Hello Harsh,
I am also kind of facing the same issue. I have used the FM REUSE_ALV_HIERSEQ_LIST_DISPLAY for ALV display. And I need to add checkbox at item level.
I have tried to add checkbox through field catalog. Following is the code I'm writing.
l_wa_fieldcat-fieldname = l_c_flag.
l_wa_fieldcat-tabname = l_c_item.
l_wa_fieldcat-checkbox = abap_true.
*l_wa_fieldcat-edit_mask = abap_f.
l_wa_fieldcat-edit = abap_true.
l_wa_fieldcat-key = abap_true.
l_wa_fieldcat-seltext_m = l_c_flag.
APPEND l_wa_fieldcat to em_it_fieldcat.
But in this case the checkbox appears in disabled form.
Can you please help? Could you be a bit elaborate on your answer i.e. the code snippet? Many thanks.
Regards,
Debapriya -
Hello and good day,
To who ever can assist me...
My little sister recently experienced the feeling of having her iTouch stolen from her @ school. Since the incident occured, two of her best friends located her iTouch and returned it back to my sister. When my sister attempted to turn the device on, she noticed that the screen that appeared showed her wallpaper, (which was a picture of herself) and the red box message at the top of the screen that indicated "iPod is Disabled"(below that statement states) "connect to iTunes"
So in seeing this message she connected the device to the family laptop. She proceed to open the iTunes program. Once the program was opened, she waited for the iTunes to read her iTouch. Once iTunes attempted to read the device the following error message appeared within iTunes stating:
"iTunes could not connect to the iPod "Delilah's iPod"because it is locked with a password. You must enteryour passcodeon the iPod before it can be used with iTunes."
With that error message coming up, the question then came to be, how do I enter my password if the Touch does not provide me that option to do so? The Touch is stuck in this "Disabled" mode and the screen that appears does not present option of entering password or anythihng for that matter.
With this issue, is there anyone out there that has experience this touble? Is there a solution, and if yes, could you please guide and advise us on what action to take? Unfortunatley, my sisters warrenty has expired. So i know that if the issue requires for us to take it in for repair that we may have to pay for the repairs services, but it would be worth it if I can see that there is or is not an answer for this problem.
Thank you very much for you time! =)
Sincerely,
Jefferson K. Tover
(big brother)Place the iPod in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
I can only get my bookmarks to appear in safe mode when starting firefox normally they do not appear
# Question
i can only get my bookmarks to appear in safe mode when starting firefox normally they do not appearExtensions can sometimes be the cause of problems. If the problem does not occur in Safe Mode, then you can disable your extensions one-by-one until you find out which one is causing the problem. See [[Troubleshooting extensions and themes]]
-
HT1212 My 80 yr old mother put her mini into disable mode when downloading ios7
She did something with her pass code when setting up ios7. Tried everything but now in disable mode. She's never synch'd with a PC, iTunes, etc. should I perform the following on my MacBook? Looking for suggestions. Thanks!
alternatively, place the device in recovery mode and restore it to erase the device:
Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
Continue holding the Home button until you see the Connect to iTunes screen.
iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.Tried both of these - neither have worked.
Witht he first instructions it just keeps stating that they need the passcode
and pretty much with the next instructions - go through the whole process and then asks for the passcode - both of these are being asked on iTunes.
So, after spending about 2 hours on this the ipad is still disabled.
Any other ideas? Do I need to go into the store?
Thanks -
Ok so my ipod is making me really angry. If I don't figure this thing out today after trying for so long I think I'm going to take my car and repeatedly run the thing over until its in a million pieces.
Right now heres the long story which ill try keep kinda short but I do need to explain whats happened thus far
Ipod touch (2G), Mondel: A1288 which has gone into disabled mode and is basically useless at the moment.
Now I've done the thing where you hold the two buttons while plugged into laptop until itunes detects ipod in recovery mode. Then I try to hit restore, this starts up the download/ update thing which will not download because here in the dark ages of New Zealand our internet is slow. So because its so slow the ipod touch takes itself back into disabled mode! ahhhhhhhhhhhhh so FRUSTRATING
Now I'm aware that I can pre-download the firmware (which will still probably take ages but may save the ipod from timing out and going back into disabled screen) and then just hit control and select it when ipod is detected in recovery mode by itunes. The only thing wrong with doing this however, is when I go to the site to get the firmware from http://http://www.felixbruns.de/iPod/firmware/ and look in the drop down menu of 2G ipod touches, I don't see my model listed there so I'm wondering what firmware I can download for the A1288? Is it compatible with a different version? because it wasn't even listed in the drop-down menu of ipod touches.
I just wan't the thing going again! they put these things into technology that make it useless because they know the average joe like me will just give up trying to fix it and buy a new one. Well not this time, if I cant fix this, I'm going to run the thing over and that will be that!
Many thanks for reading my speal, I hope somebody can helplol yea when i inserted the link i just copied and pasted thats why that happend... Lets try again... http://www.felixbruns.de/iPod/firmware/
Anyways when I go to it theres a drop-down list and you select the one you want and I know the number next to it identifies the model but the thing is they don't have my model listed so my main question is, what version eg. 2.1.1. or 2.2.1 etc. etc. etc. etc. will work with my model of ipod touch which is the 2g Model A1288?
Does anybody know? Does it work with any firmware thats for 2G ipod touches or do i have to get firmware thats model specific? -
hi,
i created a job which calls the stored proc but i would like to create the job in disabled mode now and later when ever its needed i would like to enable it.
need help to modify the below code.
DECLARE
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'EMPLOYEE_PROC;'
,next_date => TRUNC(LAST_DAY(SYSDATE)) + 1
,interval => 'TRUNC(LAST_DAY(SYSDATE)) + 1'
,no_parse => FALSE
END;
/Hi,
You can create the job without specifying the interval. Later, you can use dbms_job.change / dbms_job.interval to change the interval.
Something like,
DECLARE
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'EMPLOYEE_PROC;'
,next_date => TRUNC(LAST_DAY(SYSDATE)) + 1
,interval => null
,no_parse => FALSE
END;
/-Arun -
Function Module to Lock a Variant or see variant values in Disabled mode?
Hi,
I have a requirement in which I create some jobs which takes some variant as one of the input.
My Problem is once i have executed the job successfully in SM37, I need to see the variant values. I know there is a function Module RS_VARIANT_CHANGE with which we can see the values of variant.
But i dont want the user to modify those values since the job has already been executed. I just want to see them.
Can anyone tell me is there any FM to see just the variant values in disabled mode or the the variant is locked so that the user cant modify it?Hi,
I'm not sure if you really want to create a program to see the variant values?
Because you can see the values by simply going to SM37, select the job, display list of steps, position cursor and use menu Goto -> Variant
Moreover, (I don't know if it may answer your requirement) when you schedule a job with a report which outputs an ABAP list, you may define in the print parameters the option "Selection cover sheet" to print the values of selection screen parameters/select-options.
Sandra -
How can i get my iphone, from the disable mode
how can i get my iphone 3gs, out of the disable mode?
If your phone is disabled because you forgot your passcode, restore the phone on the last computer it was synced with. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device. See http://support.apple.com/kb/HT1212.
-
How to set parameter id for a field, which is in disable mode ?
Hi,
I Have to set parameter id for field ledger for transaction FAGLB03, which is in disable mode, i have to set it through program,please let me know how to set it.
Thanks.Say i have 5 rows then
for(int i=1;i<=5;i++){
String Newpath = updatepath(eval("{{obj.libraryname.web_input_text_fieldname}}"),i)
web.text_area(Newpath).setText("Text to be set")
Below function is used to update my path
public String updatepath(String path,int i) throws exception {
String FPath = "";
if(i<2) {
FPath = path.substring(0, path.indexOf("'", path.lastIndexOf("@id=")+5))+path.substring(path.indexOf("'", path.lastIndexOf("@id=")+5));
} else {
FPath = path.substring(0, path.indexOf("'", path.lastIndexOf("@id=")+5))+(i-1)+path.substring(path.indexOf("'", path.lastIndexOf("@id=")+5));
return Fpath
anyother way to update path and set the fields in mutiple block is appreciable
thanks
Suresh -
+, - button and inherited tick box is in disabled mode for account assignme
In the attribute tab of org structure (PPOMA_BBP), we are not getting +, - button and inherited tick box is in disabled mode for account assignment category (attribute is KNT).
We want to enter two values for the account assignment category with inherited tick box (ticked).
Please suggest me how to get the +, - and inherited tick box (ticked) for the account assignment.
Regards.Hi Imam,
Unde attributes
You will find one Application Toolbar...
Overview, Select Attribute, Check Entries,Insert line,Delete line..
So under All values you will find AcctAssigCat, Exculded, Default, Inheried
Select the row and click on Insert Line, now you should be able to insert the new acct Assignment category
rg
sam -
How do i get the itunes on the computer acknowledge my ipod if it is stuck in disable mode
how do I get iTunes to acknowledge my ipod wen its plugged into computer?? it is stuck in disabled mode so I cant acknowledge it threw my ipod.. what do I do??
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes -
HT1459 How do I restore my ipod when it is in the disable mode. I have try everything.
i need help restoreing my ipod it is in the disable mode. I have connect it to itunes and it tell me that i need to enter a passcode which i have forgotten. I have tryed the holding the home buttom thing but that want work. What else can i try?
iOS: Unable to update or restore - Support - Apple
-
Document category name for Standard Invoice is in disable mode ples urger!!
Hi All,
when i am creating the invoice in invoice work the document category is in disable mode. I did all the required setups but it is not allow me to enter document category.
Version is 11.5
Regards,
Raju.
Edited by: 956206 on Sep 5, 2012 3:34 AMHello.
From the User Manual:
Method:
Select the method that your documents are entered, automatic or manual.
-Automatic is when a concurrent process (e.g., an external program) enters transaction data into an Oracle Application, which generates documents.
-Manual is when a document is manually entered using a form in an application.
Octavio -
My ipod is disabled and the message requests to try again in 223004 minutes. I think it might have something to do with the date being set wrong before it went into disabled mode. Can you assist in enabling.
You'll need to connect it to the iTunes library you normally sync it with and restore it. If iTunes asks you for this passcode before it will let you proceed, connect the iPod to iTunes in recovery mode instead using the instructions in this Apple support document.
iOS: Unable to update or restore
B-rock
Maybe you are looking for
-
Going to a particular view in a transaction..
Hello All, I am using call transaction 'XD03' using t_bdc mode 'N'. In the internal table I am passing values inorder to go directly to the partner function view in sales area. Even though sy-subrc eq 0, the program is not returning any output, but t
-
I am trying to download Photoshop CS6 onto my Mac from the Adobe website, but I do not have a serial number. I made an Adobe ID, but the serial number is not under "My Products" nor have I received an email including a serial number. I do not know ho
-
I am using Firefox 4.0 Beta 7 on both my Android as well as my laptop. I am trying to set up the sync feature and keep getting the error message on my Android saying that the username or password are invalid. I have tried uninstalling and reinstallin
-
Cannot seem to add my Kodak printer...
I have a Kodak printer and when trying to add it to my new Mac, it says to contact manufacturer for latest software. does anyone know how to install a printer this way?
-
[Solved] nm-applet does not display in normal user's panel
I installed Arch Linux yesterday. Today, I am trying to get some of the refinements working. I installed OpenBox as a standalone window manager. I got several things working exactly the way I wanted as root, such as networkmanager, nm-applet, and pyp