Checkbox in table - problem with history.back()

Hello,
I have a table and in one td there is a html checkbox: <input type="checkbox" name="test" value="">. But when I check one of these checkboxes and want to go back to another page - over a button "back" which initiates a branch, I get the following error:
ERROR:
Not Found
The requested URL /htmldb/wwv_flow.accept was not found on this server.
Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at DEPHBRSAA1MSTM3.code1.emi.philips.com Port 80
Does anybody know what I can do, so that I am able to go back to other sites if some checkboxes are checked?!
Thank you in advance.
Stoefran

Similar Messages

Problem with history when ther is page redirection after 'go back' button is clicked.

Recently I was developing some application which requires request redirection from server when the browser's 'go back' button is clicked. At that time while I was testing implemented behaviour i noticed that when i go one page back forward button is disabled and when I want to go back again I am returned one the same page over and over again. It seems that there is a problem with history and how firefox handles a page redirection.
In other browsers everything goes as it should and there isn't any such problem with history.
I hope that this problem will be solved in the next version.

Hi,
I found this Terminal command here on the discussion board posted bu Sinzu.
defaults write com.apple.Safari com.apple.Safari.ContentPageGroupIdentifier.WebKit2BackspaceKeyNavigationEnable d -bool YES
Dimaxum
Sorry, everyting is BOLD tekst.

Problem with the back camera in iPhone 4 (Black Shadow)

Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
The iPhone haven't dropped me for some quite time and don't crashing.
Look here is a photo to show you how the black shadow looks like:
Please, anyone know what the problem can be?

It certainly does work.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problem with Portlet Backing Context

Hi,
I am having problem with Portlet Backing context.
I have on portlet and one JPF associated with this portlet.
Now in JPF action method i have Portlet Backing context object, using this object
i tried to get the previous portlet state using portletCtx.getPreviousWindowState().
But It always gives me null.
can anyone help me out ? its very urgent.
or you can suggest me anyother option to do this....
Thanks,
Vijay Patel

Vijay -
You might want to post this to the Portal newsgroup.
Regards,
Kunal
"vijay patel" <[email protected]> wrote:
>
Hi,
I am having problem with Portlet Backing context.
I have on portlet and one JPF associated with this portlet.
Now in JPF action method i have Portlet Backing context object, using
this object
i tried to get the previous portlet state using portletCtx.getPreviousWindowState().
But It always gives me null.
can anyone help me out ? its very urgent.
or you can suggest me anyother option to do this....
Thanks,
Vijay Patel

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one?

My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost

Problem with OEM backing up on windows system.

Hi to all,
I have a problem with backing up with a specific user.
I am currently running various "test" db's and am planning to back them up.
The Setup:
Host OS is windows 2003 server s2
Grid control 10.2.0.1
Database 10.2.0.2
Target Db is running on a windows 2003 server
The Situation:
From grid control I locate the db in question and go to the maintenance page and the backup settings. First of all I want to test the backup using the tab. Before this of course I enter the Host OS credentials into the system, let’s say "jamie", and add the appropriate password. By this point I have made sure that the user "jamie" is in the local security policy setting "log on as batch job" and that is in the group ora_dba (This is on both the machine I am backing up from and the target db machine.). For security reasons I have limited the share folder location to the user "jamie", making sure that sharing and security has the appropriate privileges to access the share.
I run a test backup using the tab within backup settings and await the results. The results come back unsuccessful. Reading through the log I see that the path to backup share is denied.
So to further the test I change the privileges within the share to "everyone" and that is for both sharing and security, just to see whether or not it’s the path itself rather than restrictions to the user. It is then a success. I checked to see who actually owned the file that was used within the test. It belonged to the local system on the target db, not to the user that I had specified within "Host OS Credentials".
Can anyone explain to me why and what is the reason behind putting in Host OS Credentials when the agent that is committing the back up is using the local domain system user account. I am aware that the Agent is part of a service within windows and belongs to the local domain. Ergo, why have host credentials.
And can anyone help me out with getting round this predicament if I still want security within the systems. I can’t just leave access to the share under "everyone", that'd be a really big hole in the system?!
Any help at all will be gratefully received.
If you’ve got any questions to help me solve the problem, please fire away.

You may want to take a look at these metalink notes:
Ref.
Subject:      ERROR in RMAN to Write to Shared Drives on Windows NT/2000
     Doc ID:      Note:246107.1      Type:      PROBLEM
     Last Revision Date:      08-JUL-2004      Status:      PUBLISHED
Subject:      How to Configure RMAN to Write to Shared Drives on Windows NT/2000
     Doc ID:      Note:145843.1      Type:      BULLETIN
     Last Revision Date:      21-OCT-2005      Status:      PUBLISHED
~ Madrid
http://hrivera99.blogspot.com/

Bdc upload file data into internal table problem with gui_upload fm

Hello experts,
my coding is like this ..
data : begin of itab occurs 0 .
field1 like mara-matnr,
field2......
etc,
end of itab.
data: file1 type string.
parameter :file like rlgrap-filename.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
static = 'X'
mask = space
field_name = 'FILE'
CHANGING
file_name = file.
START-OF-SELECTION.
FILE1 = FILE . "HERE I AM PASSING INTO STRING
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = FILE1
FILETYPE = 'ASC'
has_field_separator = 'X'
TABLES
data_tab = itab. " here the data is not populating from the file , it is giving the error like speified table not found.
HERE i am getting the message like "specified table name not recgonised" . the data is not populating into the itab from the file.
file structure is same as the internal table.
I stored the file as .txt( ie in notepad).
my file is like this..
10000 200 323 sunndarrr.......
i had a problem with this bdc , i am getting like "specified table name not recgonised" in the fm gui_upload while debugging.
when i am using the ws_upload it is working fine.
please guide me where i have done the mistake.
thank you so much for all the replies.

Hi,
Have a look on the following code.
TABLES: kna1.
DATA: BEGIN OF itab1 OCCURS 0,
      str(255),
      END OF itab1.
DATA: itab2 TYPE kna1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
    filename                = 'D:\ABAP EVE\ffile1.txt'
    filetype                = 'ASC'
TABLES
    data_tab                = itab1
EXCEPTIONS
    conversion_error        = 1
    file_open_error         = 2
    file_read_error         = 3
    invalid_type            = 4
    no_batch                = 5
    unknown_error           = 6
    invalid_table_width     = 7
    gui_refuse_filetransfer = 8
    customer_error          = 9
    no_authority            = 10
    OTHERS                  = 11.
IF sy-subrc <> 0.
WRITE:/ 'sorry'.
ELSE.
LOOP AT itab1.
    SPLIT itab1-str AT ',' INTO itab2-kunnr itab2-name1.
    APPEND itab2.
ENDLOOP.
IF sy-subrc = 0.
    LOOP AT itab2.
      WRITE:/ itab2-kunnr,itab2-name1.
      INSERT INTO kna1 VALUES itab2.
    ENDLOOP.
    IF sy-subrc = 0.
      WRITE:/ 'inserted'.
    ELSE.
      WRITE:/ 'not inserted'.
    ENDIF.
ELSE.
    WRITE:/ 'fail'.
ENDIF.
ENDIF.
Flat file:
10001,Sadney
10003,Yogesh
20005,Madan
1.U need to define internal table with one field of max size
2.upload the flat file data into that internal table
3.split that internal table data into another internal table(having fields)
<REMOVED BY MODERATOR>
thanks,
Chandu
Edited by: Alvaro Tejada Galindo on Apr 30, 2008 12:17 PM

Problem with the back button in the Alv ouput

i have refresh button in output of my alv report when i click on this it is getting refreshed ,now the problem is with the back button after refresh whn i click on back button it is not going to selection screen , i have to click the back button thrice to come out to the selection screen ,if have refreshed the ouput screen twice .
if i dont refresh the back button is working fine , So i have used "call to selection screen 1000" it coming to selection screen without any problem but in selection screen on clicking on back button it is again going back to output screen ,So please suggest what has to be done here .

Hi Brahmananda,
Please try to understand the flow of program and the screen navigation
the click of BACK button triggers PAI and (to the best of my knowledge) you might have called the ALV screen number without any checks ( may be) so it is again taking to the ALV.
try using
in PAI
module exit at exit-command
in program
module exit
case ok_code
when 'BACK'.
LEAVE PROGRAM ( or any thing that you want it to be )
endcase
endmodule
regards
Ramchander rao.K

Problem with getting back "synchronous" process result!!!

i have created the partner link to my synchronous process which is already on the server, along with the input and output variable for dealing with that particular process...
my input variable matches the xml schema of my synchronous process... when i expand the input variable node, i can see the elements which i'm trying to pass as the input to my synchronous server.
HOWEVER!!! there's a problem with my output variable, clicking expand on the node, it displays nothing (basically it's suppose to be in the format of the xml schema which i have specified).. hence i cannot work with the output of the asynchronous process...
cheers,
Shivek
how do i fix this problem..

can you please provide little bit more details? where do you click output variable? are you clicking from bpel console debugger?

Im facing problem with my back camera.it's keep on hanging

PLease help me fix my problem regarding my back camera because it keeps on hanging.please help solve this problem.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost

Problem with pushbutton BACK

Hi all,
I need a suggestion on a program created by me, when I launch
the program, which is a transaction in which the inside there are
buttons that are related to the programs, when accessing a program,
if I press the BACK button does not return to main screen of the
transaction but to the main screen of SAP. Taking a ride in debug,
I noticed that because of the management SUBMIT BACK in a sense,
the neglect,
how can I avoid this?
Best regards.

i have a similar problem. am using ipod video 30GB enhanced 5th gen. i tried to sync with itunes 6, but i got something like this - "your device requires the latest version of itunes. please install itunes 7"
the problem is, i installed itunes 7 but i could hardly update my ipod. not even to uncheck the "open itunes when ipod is connected" checkbox. if i do that and click 'Apply', itunes 7 will simply freeze, and after a while it gave me some error message. that was why i reverted to itunes 6.
so, is there any way i could make my ipod to work with itunes 6? it it helps, i NEVER 'sync'ed my ipod with itunes 6 before. i downloaded itunes 7 right after i bought the ipod last week.
Dell Inspiron 630m Windows XP Pro

Problem with reverting back

Once I regress from 7.0 back to 6.0 I get the following message:
"The Software for communicationg with the iPod is not installed correctly. Please reinstall iTunes to install the iPod software."
I have the ipod updater from 06-28-2006 and when I launch it it says the following:
'iPod service error"
Any suggestions??

i have a similar problem. am using ipod video 30GB enhanced 5th gen. i tried to sync with itunes 6, but i got something like this - "your device requires the latest version of itunes. please install itunes 7"
the problem is, i installed itunes 7 but i could hardly update my ipod. not even to uncheck the "open itunes when ipod is connected" checkbox. if i do that and click 'Apply', itunes 7 will simply freeze, and after a while it gave me some error message. that was why i reverted to itunes 6.
so, is there any way i could make my ipod to work with itunes 6? it it helps, i NEVER 'sync'ed my ipod with itunes 6 before. i downloaded itunes 7 right after i bought the ipod last week.
Dell Inspiron 630m Windows XP Pro

Problems with history and browsing

Two problems, both started with upgrade to Leopard. When I scroll down through history, I can see the previous days listed, but every time I try to scroll down and open one up, it immediately jumps to today's history. I cannot get past this. Never happened before.
Second problem. When I click on any page in the history, it comes up without the side scroll bar, and without the url and tool bar at the top.
Any help gratefully received.

Hello jr:
That is a new one on me.....
Try trashing the preference file (com.apple.safari.plist) and restarting (you will need to reenter preferences that differ from the default.
I would also reset Safari.
Barry

Conditional Text in Table - Problems with row height adjustment

Hey there,
I’m german but I try to express my problem in english as good as I can. Not always easy with the different menu names. Hope you get what I want to say! :-)
As you can see in my attached screenshot, I placed text in a table.
Text height is set to: minimum 1,5 … so it adjusts to the amount of text.
This is what I want - it should adjust the height to the marked/aktivated conditional text.
It always adjusts the hight when I blind out the first line oder lines in between (e.g. line 2+3 of 4).
But if I want to blind out the last line(s), there is a ¶ at the end and a extra blank line with the #.
I know, the # stands for the following hidden Text, but why does it work with the red/green text.
There is also text hidden (green), but the mark # is right after the last word - not in a new line.
Has anyone a solution for this?
Thanks in advance!

That's ok so far. A paragraph sign at the end of a text forces a new line.
To change that do the following:
For every condition you need another condition just for the paragraph sign that comes immediately after the condition. Not after every paragraph of one condition, but at the end of every consecutive numbers of paragraphs of the same condition.
So in your third example you'll need two conditions more:
1. One for the paragraph sign at the end of condition "meaasurements"
2. One for the paragraph sign at the end of condition "price 2"
Whenever you make the other conditions invisible, you also have to turn off the new conditions that only control the paragraph signs.
See the following screenshots:
Uwe

Problem with exporting back to LR from PS

I exported a photo to PS as always for and edit but when I was done it didn't go back to LR. I can only open from PS. How do I get it back to LR and why did this happen?

Hi Le,
Sound familiar; here in The Netherlands we have the same problem. That is why we use the English versions for XP and Office.
I don’t quite understand how you interface to Excel. Directly with ActiveX or through a CSV file.
Can you explain a bit more ?

Checkbox in table - problem with history.back()

Similar Messages

Maybe you are looking for