Checkbox needs to be greyed out in ALV List display
Hi Experts,
I am using u2018 REUSE_ALV_HIERSEQ_LIST_DISPLAY' and I need to make the checkboxes greyed out based on certain conditions. For eg --Say if the field 'status' is 51 in my internal table then the checkbox should be editable in the List display otherwise the checkbox should be greyed out .. Can this be achieved? Or should I use Classes to do it. Please adviceu2026
Hi Shankar,
This is possible using CELLSTYLES (lvc_t_styl), which can fulfill the behaviour you require for your scenario. I would suggest you to go through the below mentioned link posted on SCN which to asked for the same set of requirement.
Disabling certain rows in editable oo alv ?
Please validate the same at your end and let know on this.
BR/Thanks
Pranav Agrawal
Similar Messages
-
HOW TO DISPLAY MY OWN PF STATUS IN ALV LIST DISPLAY
Hi All,
i am developing one program in this program i am displaying output by using alv list display. after displaying the out SAP predefined pf status is coming. here i need my own pf status. any body can send me the sample code ir modify my code if possible.
i am sending my code below.
report zmahi6.
type-pools : slis.
tables : zuser_secobjects.
data : it_secobjects like zuser_secobjects occurs 0 with header line.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
"type zuser_secobjects-start_date
p_edate(10) default '12/31/9999',
type zuser_secobjects-end_date,
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
start-of-selection.
perform get_data.
check sy-subrc eq 0.
set pf-status 'ZMAHEE'.
perform prepare_fieldcatalog.
perform alv_list_display.
*& Form PREPARE_FIELDCATALOG
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
endform. " PREPARE_FIELDCATALOG
*form pf_status_set using rt_extab type slis_t_extab.
set pf-status '0001'.
*endform.
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_comomand = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_sort = i_sort
it_events = it_evts[]
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form GET_DATA
text
--> p1 text
<-- p2 text
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " GET_DATA
thanks,
maheedhar.tFollow this steps.
I ahve done it once and hope wuld work for you as well.
Go to SE80. Open a a standard ABAP program - SAPLKKBL. diasplay object.
This program has many standard GUI status. Copy the one which suits you the best. May be any one standars status. Right click it and copy to your custom report. Now open your Z-Program in SE80. You will see the GUI status and when you open it you see the name of the status that you have copied from.
Now you can go and do any modifications in the screen.
Remember you have to use the same status in the program as well.
Please check this piece of code.
call the ABAP list viewer *
FORM list_display TABLES a_output.
pgm = disvariant-report = sy-repid.
disvariant-variant = variant.
call list viewer
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = pgm
i_callback_pf_status_set = 'SET_PF_STATUS'
it_fieldcat = fieldcat
is_variant = disvariant
is_layout = layout
is_print = print
i_save = 'A'
it_events = eventcat
it_sort = sortcat
i_callback_user_command = 'USER_COMMAND'
TABLES
t_outtab = a_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
ENDFORM. "LIST_DISPLAY
FORM SET_PF_STATUS *
FORM set_pf_status USING extab TYPE slis_t_extab.
SET PF-STATUS 'STATUS1'.
ENDFORM. "set_pf_status
FORM USER_COMMAND *
FORM user_command USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
DATA t_difference TYPE i.
CASE ucomm.
WHEN 'ENT1'.<----Function code
D0 your processing.
ENDCASE.
selfield-refresh = 'X'.
ENDFORM. "user_command
HOpe this helps.
Shreekant -
How to edit particular field in alv list display-urgent
HI ALL,
my requirement is i am displaying output using alv list display. now my rewuirement :
i am displaying out in edit mode only. when user clicks one particular field
for example record is like
runrate a01 maheed -> if user clicks on a01 this field should be editable. i have a following code
w_field-edit = w_edit.
w_field-input = 'X'. -> using this code i can able to display entire colomn in edit mode. this not suits my requirement.anybody can send me the sample code please.
thanks,
maheedhar.tCan you please send me the sample code plz.
i am sending my code below.
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
data : checkbox type c value 'X',
action type c,
end of it_secobjects.
data : begin of it_secobjects1 occurs 0.
include structure ZUSER_SECOBJECTS.
data : checkbox type c VALUE 'X',
end of it_secobjects1.
data : wa_ita like line of it_secobjects.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
maheed-start.
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
delete it_SECOBJECTS.
endloop.
*RS_SELFIELD-REFRESH = 'X'.
maheed-end.
maheed-start. apr 13
WHEN 'DELETE'.
loop at it_SECOBJECTS where checkbox eq 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
delete it_SECOBJECTS.
endloop.
RS_SELFIELD-REFRESH = 'X'.
when 'SAVE'.
DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
commit work.
refresh :IT_SECOBJECTS1.
maheed-end. apr 13
*when 'SAVE'.
*LOOP AT IT_SECOBJECTS WHERE CHECKBOX = 'X'.
MOVE-CORRESPONDING IT_SECOBJECTS TO IT_SECOBJECTS1.
APPEND IT_SECOBJECTS1.
CLEAR IT_SECOBJECTS1.
DELETE IT_SECOBJECTS.
*ENDLOOP.
*DELETE ZUSER_SECOBJECTS FROM TABLE IT_SECOBJECTS1.
ENDCASE.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog." USING w_edit TYPE any.
data : w_edit type c.
clear w_edit.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-EDIT = 'X'. "maheed
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_PARTNER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m03.
w_field-edit = w_edit.
w_field-input = 'X'.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'INACTIVE'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 3.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
DATA : LC_GLAY TYPE LVC_S_GLAY.
LC_GLAY-EDT_CLL_CB = 'X'.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'ACTION'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.t -
Hide delete option is not working in ALV List Display- urgent
Hi All,
In my program i am displaying the output by using alv list display. after displaying the data i am displaying my own pf status here. in this i have few pushbuttons like
selest all, deselect all, hide . first two options are working fine. when i click hide button selected records are going to be hide.but this is not happening in my program. any body cam send me the code plz.
i am sending my code below. if possible please modify and resend the code asap.
my code:
type-pools : slis.
tables : zuser_secobjects.
data : t_header1 like zuser_secobjects.
data : begin of it_secobjects occurs 0.
include structure t_header1.
*data : box,
input(1) type c,
data : checkbox type c,
flag type c,
end of it_secobjects.
data : wa_ita like line of it_secobjects.
*data : it_secobjects like zuser_secobjects occurs 0 with header line.
data : i_field type slis_t_fieldcat_alv with header line.
data : w_field like line of i_field.
data : i_sort type slis_t_sortinfo_alv.
data : w_sort like line of i_sort.
data : it_filt1 type slis_t_filter_alv with header line.
data:
i_tabname type tabname,
i_repid like sy-repid,
is_lout type slis_layout_alv.
data : it_filt type slis_t_filter_alv with header line,
it_evts type slis_t_event with header line.
DATA : is_vari type disvariant.
constants : c_default_vari value 'X',
c_save_vari value 'U',
c_checkfield type slis_fieldname value 'ACTION',
c_f2code type sy-ucomm value '&ETA'.
data : chk_box type slis_fieldname.
selection-screen: begin of block b1 with frame title text-t01.
parameters : p_appln type zuser_secobjects-appln.
parameters : p_user type usr02-bname, "zuser_secobjects-appln_user,
p_partnr type zuser_secobjects-appln_partner,
p_ptype type zuser_secobjects-partner_type default '02',
p_upostn type zuser_secobjects-user_position,
p_sdate like likp-erdat default sy-datum,
p_edate(10) default '12/31/9999',
p_revnum type zuser_secobjects-revnum,
p_cted type zuser_secobjects-created_by,
p_cdate type zuser_secobjects-creation_date,
p_ctime type zuser_secobjects-creation_time,
p_chnby type zuser_secobjects-changed_by,
p_cdate1 type zuser_secobjects-changed_date,
p_ctime1 type zuser_secobjects-changed_time.
selection-screen: end of block b1.
form user_command using p_ucomm like sy-ucomm
rs_selfield type slis_selfield.
*DATA : it_filt type slis_t_filter_alv with header line.
case p_ucomm.
when 'SELECT_ALL'. " SELALL is the FCODE of ur push button
loop at it_secobjects into wa_ita.
wa_ita-checkbox = 'X'.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
when 'DESLCT_ALL'.
loop at it_secobjects into wa_ita.
wa_ita-checkbox = ' '.
modify it_secobjects from wa_ita.
endloop.
rs_selfield-refresh = 'X'. "<- ADD THIS
is_lout-f2code = c_f2code.
is_lout-box_fieldname = c_checkfield.
is_lout-get_selinfos = 'X'.
is_lout-detail_popup = 'X'.
is_lout-detail_initial_lines = 'X'.
when 'HIDE_DEL'.
rs_selfield-exit = 'X'.
it_filt-fieldname = 'CHECKBOX'.
it_filt-tabname = '1'.
it_filt-valuf = 'X'.
it_filt-intlen = '1'.
it_filt-inttype = 'C'.
it_filt-datatype = 'CHAR'.
it_filt-valuf_int = 'X'.
it_filt-sign0 = 'E'.
it_filt-optio = 'EQ'.
if it_filt[] is initial.
append it_filt.
else.
modify it_filt index 1.
endif.
perform display using i_object.
PERForm ALV_LIST_DISPLAY.
WHEN 'SHOW_DEL'.
rs_selfield-exit = 'X'.
free it_filt.
PERForm ALV_LIST_DISPLAY.
when 'SAVE1'.
select * from zuser_secobjects where
appln = zuser_secobjects-appln
and appln_partner = zuser_secobjects-appln_partner
and partner_type = zuser_secobjects-partner_type
and start_date = zuser_secobjects-start_date
and end_date = zuser_secobjects-end_date.
endselect.
if sy-subrc eq 0.
message e000(ZV) with 'Duplicate Entry'.
endif.
endcase.
endform.
*& Form delete
form delete.
data : begin of is_secobjects occurs 0.
include structure zuser_secobjects.
data : checkbox type c.
data : end of is_secobjects.
is_secobjects-checkbox = 'X'.
modify is_secobjects
from it_secobjects
transporting checkbox
where checkbox = 'X'.
endform.
*& Form get_data
form get_data.
select * from zuser_secobjects
into table it_secobjects.
endform. " get_data
*& Form prepare_fieldcatalog
text
--> p1 text
<-- p2 text
form prepare_fieldcatalog.
clear: w_field,i_field.
refresh:i_field.
i_field-key = 'X'.
i_field-col_pos = 1.
i_field-ddictxt = 'S'.
i_field-seltext_s = '@11@'.
i_field-checkbox = 'X'.
i_field-input = 'X'.
i_field-fieldname = 'HEADER'.
i_field-outputlen = 0.
append i_field.
clear i_field.
w_field-fieldname = 'APPLN'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-seltext_l = text-m01.
w_field-outputlen = '10'.
w_field-col_pos = 1.
append w_field to i_field.
clear w_field.
w_field-fieldname = 'APPLN_USER'.
w_field-tabname = 'IT_SECOBJECTS'.
w_field-just = 'C'.
w_field-seltext_l = text-m02.
w_field-outputlen = '7'.
w_field-col_pos = 2.
append w_field to i_field.
clear w_field.
endform. " prepare_fieldcatalog
*& Form ALV_LIST_DISPLAY
text
--> p1 text
<-- p2 text
form alv_list_display.
i_repid = sy-repid.
is_lout-box_fieldname = 'CHECKBOX'.
it_filt-fieldname = 'CHECKBOX'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
i_callback_program = i_repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = 'USER_COMMAND'
is_layout = is_lout
it_fieldcat = i_field[]
it_filter = it_filt[]
it_events = it_evts[]
i_default = c_default_vari
i_save = c_save_vari
is_variant = is_vari
tables
t_outtab = it_secobjects.
endform. " ALV_LIST_DISPLAY
*& Form display
text
-->P_I_OBJECT text
form display using object.
case object.
ENDCASE.
endform. " display
thanks,
maheedhar.tHi,
What do you mean by Hiding the records.
Deleting completely from the screen.
You can just delete the records from the internal table and pass to field catalog before displaying again.
or serach in the slis structrue for hiding the contents of the output.
reward if useful
regards,
Anji -
Issue in ALV List display
Posted: Apr 5, 2008 10:25 AM Edit E-mail this message Reply
Hi Friends,
Can any one help me out in the logic to display the output in the ALV list.
i want to get the out put as
based on the field4 i have to display fieds5, field6 and field 7 values as mentioned below.
field1 field2 field3 field4 field5 field6 field7
0L 123 456 2008 001 123.00 456.00
- - - - 002 213.00 789.00
- - - 003 0.00 0.00
- - - 004 0.00 0.00
- - - 005 0.00 0.00
- - - 006 0.00 0.00
336.00 1245.00
Thanks,
Vijayfor display you have to define fieldcatlaog and use Fm RESUE_ALV_GRID_DISPLAY,
Go through this program
*& Report Z_OPEN_CLOSE *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
MSEG, " Material Document: Item Data
MARA,
MARD,
S031,
EKKO,
EKPO,
LIKP,
MAKT,
J_1IWRKCUS,
T001W,
WB2_V_MKPF_MSEG2,
MMIM_REP_PRINT,
YW2_STKMOVEMENTS,
YPLNT,
MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
PPLNT LIKE YPLNT-PPLNT,
WPLNT LIKE YPLNT-WPLNT,
END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
MJAHR LIKE MKPF-MJAHR,
BUDAT LIKE MKPF-BUDAT,
VGART LIKE MKPF-VGART,
BWART LIKE MSEG-BWART,
MATNR LIKE MSEG-MATNR,
WERKS LIKE MSEG-WERKS,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
KUNNR LIKE MSEG-KUNNR,
ZEILE LIKE MSEG-ZEILE,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
MATNR1 LIKE MSEG-MATNR,
END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
WERKS LIKE MARDH-WERKS,
MEINS LIKE MARA-MEINS,
MATNR LIKE MARDH-MATNR,
LGORT LIKE MARDH-LGORT,
LABST LIKE MARDH-LABST,
LFGJA LIKE MARDH-LFGJA, "Added -MB
LFMON LIKE MARDH-LFMON, "Added -MB
PERIO(6),
INSME LIKE MARDH-LABST,
EINME LIKE MARDH-LABST,
SPEME LIKE MARDH-LABST,
RETME LIKE MARDH-LABST,
O_STK LIKE MARDH-LABST, " Opening Stock
C_STK LIKE MARDH-LABST, " Closing Stock
END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
WERKS LIKE MARD-WERKS,
MATNR LIKE MARD-MATNR,
LGORT LIKE MARD-LGORT,
LABST LIKE MARD-LABST,
INSME LIKE MARD-LABST,
MEINS LIKE MARA-MEINS,
EINME LIKE MARD-LABST,
SPEME LIKE MARD-LABST,
RETME LIKE MARD-LABST,
END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
MBLNR LIKE MKPF-MBLNR,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
SHKZG LIKE MSEG-SHKZG,
END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
WERKS LIKE MSEG-WERKS,
MATNR LIKE MSEG-MATNR,
BUDAT LIKE MKPF-BUDAT,
BWART LIKE MSEG-BWART,
MJAHR LIKE MKPF-MJAHR,
VGART LIKE MKPF-VGART,
LGORT LIKE MSEG-LGORT,
MENGE LIKE MSEG-MENGE,
MEINS LIKE MSEG-MEINS,
XAUTO LIKE MSEG-XAUTO,
END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
LGORT LIKE MSEG-LGORT, " Storage Location
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TLOSS LIKE MARDH-LABST, " Total Loss
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
C_STK LIKE MARDH-LABST, " Closing Stock
TRFSTK LIKE MARDH-LABST, "Transfer stock
MENGE LIKE MSEG-MENGE,
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
MTART LIKE MARA-MTART, " Material Type
MAKTX LIKE MAKT-MAKTX, " Description
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
MATNR TYPE MARA-MATNR,
MTART TYPE MARA-MTART,
MEINS LIKE MARA-MEINS,
LABST TYPE MARD-LABST,
MAKTX LIKE MAKT-MAKTX,
END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
BWART LIKE MSEG-BWART,
SHKZG LIKE MSEG-SHKZG,
VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
WERKS LIKE MSEG-WERKS, " Plant
MATNR LIKE MSEG-MATNR, " Material
BUDAT LIKE MKPF-BUDAT, " Posting Date
MTART LIKE MARA-MTART, " Material Type
SPMON LIKE S031-SPMON, " Month
MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
MEINS LIKE MSEG-MEINS,
O_STK LIKE MARDH-LABST, " opening stock
TRECEP LIKE MARDH-LABST, " total receipts
PRODU LIKE MARDH-LABST, " Net Receipts - Production
RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
TDISP LIKE MARDH-LABST, " total dispatches
CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
TRFSTK LIKE MARDH-LABST, "Material Transfer stock
TRLOSS LIKE MARDH-LABST, " Transit Loss
WHLOSS LIKE MARDH-LABST, " Warehouse Loss
TLOSS LIKE MARDH-LABST, " Total Loss
C_STK LIKE MARDH-LABST, " Closing Stock
OTHADJ LIKE MARDH-LABST,
MONTH(8) ,
END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
WITH HEADER LINE INITIAL SIZE 0,
FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
KEY WITH HEADER LINE INITIAL SIZE 0,
G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
MON(2),
FYEAR1(4),
MON1(2),
OBAL LIKE MARD-LABST,
CBAL LIKE MARD-LABST,
INDEX TYPE I,
COUNT,
COUNT1 TYPE I,
O_STK TYPE P DECIMALS 3,
C_STK TYPE P DECIMALS 3,
V_MJAHR LIKE MKPF-MJAHR,
MONTHS TYPE TRFF_TYPE_DEC_6_5,
MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
ALV_VARIANT LIKE DISVARIANT,
ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
ALV_REPID LIKE SY-REPID,
ALV_PRINT TYPE SLIS_PRINT_ALV,
ALV_DETAIL_FUNC(30),
ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
S_MBLNR FOR MKPF-MBLNR,
S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
M1 RADIOBUTTON GROUP P1,
Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
IF S_BUDAT-HIGH IS INITIAL.
S_BUDAT-HIGH = S_BUDAT-LOW.
MODIFY S_BUDAT.
ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
EXPORTING
I_DATE_FROM = IDATE-LOW
I_DATE_TO = IDATE-HIGH
IMPORTING
E_DAYS =
E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
R_BUDAT-LOW = S_BUDAT-LOW.
APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
I = I + 1.
R_BUDAT-LOW+6(2) = '01'.
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
EXPORTING
DAY_IN = R_BUDAT-LOW
IMPORTING
LAST_DAY_OF_MONTH = R_BUDAT-HIGH
EXCEPTIONS
DAY_IN_NO_DATE = 1
OTHERS = 2
MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
R_BUDAT-LOW = S_BUDAT-LOW.
MODIFY R_BUDAT.
ENDIF.
IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
R_BUDAT-HIGH = S_BUDAT-HIGH.
MODIFY R_BUDAT.
ENDIF.
For Summary on 26.4.05.
IF Y1 = 'X'.
CLEAR R_BUDAT.
REFRESH R_BUDAT.
R_BUDAT-LOW = S_BUDAT-LOW.
R_BUDAT-HIGH = S_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR R_BUDAT.
ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
MON1 = MON.
FYEAR1 = FYEAR.
MON = '12'.
FYEAR = FYEAR - 1.
ELSE.
MON1 = MON.
FYEAR1 = FYEAR.
MON = MON - 1.
FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
P_SPMON0(4) = S_BUDAT-LOW0(4).
P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
IF Y1 = 'X'.
LOOP AT S_BUDAT.
S_BUDAT1-SIGN = 'I'.
S_BUDAT1-OPTION = 'NB'.
S_BUDAT1-LOW = S_BUDAT-LOW.
S_BUDAT1-HIGH = S_BUDAT-HIGH.
APPEND S_BUDAT1.
CLEAR S_BUDAT1.
ENDLOOP.
ENDIF.
IMKPFT[] = I_MKPF[].
IMKPFT2[] = I_MKPF[].
IMARDT[] = I_MARD[].
IMARDHT[] = I_MARDH[].
PERFORM MONTH_WISE.
PERFORM PROCESS_MOVEMENTS.
PERFORM CALCULATE_OPENING_STOCK.
PERFORM UPDATE_NON_TRANSACTION_ITMS.
PERFORM DELETE_EMPTY_RECORDS.
CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
MF_MONAT LIKE ISELLIST-MONTH,
MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07.
IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
MF_HLP_REPID = 'SAPLALDB'.
ELSE.
READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
EXIT.
ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
EXPORTING
INPUT = MF_DYNPFIELDS-FIELDVALUE
IMPORTING
OUTPUT = MF_MONAT
EXCEPTIONS
ERROR_MESSAGE = 1.
IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
MF_MONAT = SY-DATLO(6).
ENDIF.
CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
EXPORTING
ACTUAL_MONTH = MF_MONAT
IMPORTING
SELECTED_MONTH = MF_MONAT
RETURN_CODE = MF_RETURNCODE
EXCEPTIONS
FACTORY_CALENDAR_NOT_FOUND = 01
HOLIDAY_CALENDAR_NOT_FOUND = 02
MONTH_NOT_FOUND = 03.
IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
EXPORTING
INPUT = MF_MONAT
IMPORTING
OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
COLLECT MF_DYNPFIELDS.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
DYNAME = MF_HLP_REPID
DYNUMB = SY-DYNNR
TABLES
DYNPFIELDS = MF_DYNPFIELDS
EXCEPTIONS
INVALID_ABAPWORKAREA = 01
INVALID_DYNPROFIELD = 02
INVALID_DYNPRONAME = 03
INVALID_DYNPRONUMMER = 04
INVALID_REQUEST = 05
NO_FIELDDESCRIPTION = 06
UNDEFIND_ERROR = 07. "<<== note 148804
ENDIF.
ENDIF.
ENDFORM. "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
CLEAR S_BUDAT.
REFRESH S_BUDAT.
S_BUDAT-SIGN = 'I'.
S_BUDAT-OPTION = 'BT'.
S_BUDAT-LOW = R_BUDAT-LOW.
S_BUDAT-HIGH = R_BUDAT-HIGH.
APPEND S_BUDAT.
ELSE.
FYEAR = P_SPMON+0(4).
MON = P_SPMON+4(2).
CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
R_BUDAT-SIGN = 'I'.
R_BUDAT-OPTION = 'BT'.
CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
EXPORTING
I_DATE = R_BUDAT-LOW
IMPORTING
E_DATE = R_BUDAT-HIGH.
APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
MESSAGE I041 WITH TEXT-005.
LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
CLEAR S_BUDAT.
LOOP AT S_BUDAT.
CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
S_BUDAT-LOW+0(4) INTO LOW.
CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
S_BUDAT-HIGH+0(4) INTO HIGH.
CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
FHEADER-TYP = 'H'.
FHEADER-INFO = V_FIN1.
APPEND FHEADER.
CLEAR FHEADER.
ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_TOPOFPAGE'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
FEVENTS-FORM = 'Z_USER_COMMAND'.
MODIFY FEVENTS INDEX SY-TABIX.
CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT. -
Hi Experts,
My requirement is i need a button along with the tool bar of ALV list display . when i check the button it should display the Selection criteria values which user entered as a pop up .
Is there any default tool which displays user selection values for ALV list display ?
Regards,
Vikram.S> Is there any default tool which displays user selection values for ALV list display ?
No such program.
But you have to write a code for it. Activate Button using the pf-status. then Handle that button in User command , and show a popup with the selection values.
Function used to get the selection details is
RS_REFRESH_FROM_SELECTOPTIONS
get the data and show it using a Popup. May be a ALV popup select function will help you. -
Query regarding SAP ABAP ALV List display
Hi All,
Have a requirement where in, when a user double clicks on a particular field as shown below, the particular cell where he has clicked has to be changed to editable and input mode. I am using ALV LIST DISPLAY.
Please reply me if someone has worked on similar requirement.Hi Priya,
Check this link: http://www.saptechnicl.com/Tutorials/ALV/Edit/demo.htm. I think this is exactly what you require.
Hope this helps! Do let me know if you need anything else!!
(rename "technicl" as "technical", my apologies for the typo).
Cheers,
Shailesh. -
Shifting ALV list display of report into center
Hi All,
I have got a requirement in which the ALV list needs to be shifted in to right. By default the alv list displays from 0 Postion of the column.
IN a classical list its easy to shift the output to any column postion using write statement but in alv list how can we achieve this?
Kindly provide your inputs.
Thanks and regards
Mudit BatraHi.,
I dont think it is possible., By default it will start from position 1 even in field catalog if u give col_pos 4, 5 or., .. . If u want to display alv in center u have to create a screen and create a custom container at the center and display ALV in it..
hope this helps u.,
Thanks & Regards
Kiran -
Removing columns heading for a perticular page in ALV list display
Dear All,
For last page of my ALV list display i need to remove columns heading (Strictly for single page only).
Kindly help me with possible solution.
I am triggering page break by using group attribute in the sort catalogue.( l_v_sortcat-group = '* '. )
Best Regards
Ravishekar Thallapallyif u can catch the page number,
while building fieldcat, put the condition
if sy-page = (page number)
ls_fielcact-fieldname = fieldname.
ls_fieldcat-tech = 'X'.
LS_FIELDCAT-NO_OUT = 'x'.
modify lt_fielcat from ls_fieldcat.
but how r u catching page number?? can u pls tell
endif.
Message was edited by: Hymavathi Oruganti -
Filtering the ALV List Display
Hi all.
We had a requirement like filtering ALV List display.
Suppose my ALV list dispaly contains 100 records and by using the standard filtering option ,I restricted it to 50 records and by clicking a check box for 20 records and delete button(Customized) ,I should ideally get 30 records.
But according to standard SAP functionality buttons ,all 80 Records will be displayed .But i need 30 records.
Any function module or code will be available to achieve this one?
In this case which will be the preferable method to go further?
What will be the best method(Normal ALV/OOALV) ?
Any pointers in this regard are very much helpful.
Regards,
SSR.While selecting the records on each condition , perform the select based on ur condition so dat dat select only those records directly.
-
Manual Fieldcatalog and ALV list display.
Hi,
Could anyone help me to know the step by step procedure to create a fieldcatalog manually and then using it for ALV list display?
Thanks,
Sandeep.Hi Sandeep,
Refer this code :
FORM build_fieldcatlog USING p_it_fieldcat TYPE slis_t_fieldcat_alv.
DATA: itab_fieldcat TYPE slis_fieldcat_alv.
FOR LIGHTS
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '1'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'V_LIGHTS'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'It_matstock'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C410'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'Category'. " LONG TEXT FOR HEADER.
itab_fieldcat-seltext_m = 'Category'. " MEDIUM TEXT FOR HEADER.
itab_fieldcat-seltext_s = 'Category'. " SHORT TEXT FOR HEADER.
itab_fieldcat-outputlen = 7. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FOR CHECK BOX
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '2'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'V_CHKBOX'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'It_matstock'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C410'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'CHECKBOX'. " LONG TEXT FOR HEADER.
itab_fieldcat-seltext_m = 'CHKBOX'. " MEDIUM TEXT FOR HEADER.
itab_fieldcat-seltext_s = 'CHKBOX'. " SHORT TEXT FOR HEADER.
itab_fieldcat-checkbox = 'X'. " CHECK BOX
itab_fieldcat-edit = 'X'.
itab_fieldcat-outputlen = 2. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
*FOR MATERIAL NO (IT_MATSTOCK-MATNR)
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '3'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'MATNR'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'IT_MATSTOCK'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C410'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'MATERIAL NO'. " LONG TEXT FOR HEADER.
itab_fieldcat-seltext_m = 'MATNO'. " MEDIUM TEXT FOR HEADER.
itab_fieldcat-seltext_s = 'MATNO'. " SHORT TEXT FOR HEADER.
itab_fieldcat-hotspot = 'X'. " HOT SPOT
itab_fieldcat-outputlen = 20. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FOR PLANT (IT_MATSTOCK-WERKS)
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '4'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'WERKS'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'IT_MATSTOCK'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C510'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'PLANT'.
itab_fieldcat-seltext_m = 'PLANT'.
itab_fieldcat-seltext_s = 'PLANT'.
itab_fieldcat-outputlen = 10. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FOR STORAGE LOCATION (IT_MATSTOCK-LGORT)
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '5'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'LGORT'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'IT_MATSTOCK'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C610'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'STORAGE LOCATION'.
itab_fieldcat-seltext_m = 'STORAGE LOC'.
itab_fieldcat-seltext_s = 'SLOC'.
itab_fieldcat-outputlen = 10. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FOR QUANTITY (IT_MATSTOCK-LABST)
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '6'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'LABST'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'IT_MATSTOCK'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C710'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'QUANTITY'.
itab_fieldcat-seltext_m = 'QUANTITY'.
itab_fieldcat-seltext_s = 'QUAN'.
itab_fieldcat-outputlen = 10. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FOR UNIT OF MEASUREMENT (IT_MATSTOCK-MEINS)
CLEAR itab_fieldcat.
itab_fieldcat-col_pos = '7'. " POSITION OF THE COLUMN.
itab_fieldcat-fieldname = 'MEINS'. " FIELD FOR WHICH CATALOG ID FILLED.
itab_fieldcat-tabname = 'IT_MATSTOCK'. " INTERNAL TABLE TO WHICH THE FIELD BELONGS TO.
itab_fieldcat-emphasize = 'C110'. " COLOR OF THIS COLUMN.
itab_fieldcat-seltext_l = 'UNIT OF MEASURE'.
itab_fieldcat-seltext_m = 'UNIT OF MSURE'.
itab_fieldcat-seltext_s = 'UOM'.
itab_fieldcat-outputlen = 10. " TO DEFINE OUTPUT LENGTH OF THE COLUMN.
APPEND itab_fieldcat TO p_it_fieldcat.
FORM alv_display_grid .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
i_callback_program = sy-repid
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
i_structure_name = 'D_STRUCTURE'
I_BACKGROUND_ID = ' '
i_grid_title =
I_GRID_SETTINGS =
is_layout =
it_fieldcat = it_fieldcat
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
it_sort =
IT_FILTER =
IS_SEL_HIDE =
i_default = 'X'
i_save = 'A'
is_variant =
IT_EVENTS = I_EVENTCAT
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
I_HTML_HEIGHT_TOP =
I_HTML_HEIGHT_END =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
t_outtab = it_matstock
EXCEPTIONS
program_error = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " ALV_DISPLAY_GRID
Reward points if helpful.
Regards,
Hemant -
Hi,
how to refresh an ALV LIST display?
Thanks.Hi,
Content and Structure Change
Use
You are able to change the internal data table in various ways. Depending on which type of change you use, you have to proceed differently to make the change visible on the front end in the ALV output as well.
You are able to make the following changes:
· You change content or the sequence of the individual data records
Afterwards you need to refresh the ALV output
· You replace the entire data table
Refresh Display of the ALV Output
If you have changed single values, added rows or deleted rows in the data table of list-type ALV outputs, you need to complete these changes in the ALV output as well by refreshing the ALV display.
For Changes in the Tree Structure you do not have to refresh the display. In the other ALV tools, you do not have to refresh the ALV output when you make the following changes:
§ Changes to the Display of Columns
§ Changes Sequence of Columns in the ALV display
§ Changes to the DDIC Reference of Columns
By default, the ALV output automatically scrolls to the beginning. However, you are able to determine that the current display (position on the screen) not be changed.
You are able to refresh the ALV output in two ways:
· All settings for filters and sorting remain.
This setting can lead to newly inserted data records not being displayed because the filter setting hid exactly these data records.
· All settings for filters and sorting remain.
Features
For changes to content and structure, you are able to make the following settings:
· Refresh ALV output
· Swap the data table of the ALV output
Refresh ALV output
With the refresh, you ensure that the changed values are available on the front end as well.
Display type
ALV Tool
Classic ABAP list
Full screen
In the Container
Simple, two-dimensional table
Yes
Yes
Yes
Hierarchical-sequential list
Yes
Tree structure
No
No
Methods
Function
Class
Method
Refresh ALV output without deleting filter and sort settings
CL_SALV_TABLE
CL_SALV_HIERSEQ_TABLE
REFRESH
(Parameter REFRESH_MODE: SOFT)
Refresh ALV output and delete filter and sort settings
REFRESH
(Parameter REFRESH_MODE: FULL)
Change the Structure of the Data Table with SET_DATA
Depending on which ALV tool you are using, the parameters of the SET_DATA method are different:
If you assign a new structure with SET_DATA, all objects that referred to the previous structure will be deleted such as all sort objects in list-type ALV outputs or all node objects in tree structures.
Methods
Function
Class
Method
Change structure and data table
CL_SALV_TABLE
CL_SALV_HIERSEQ_TABLE
CL_SALV_TREE
CL_SALV_HIERSEQ_LEVEL
SET_DATA
Change the Structure of the Data Table with the SET_DATA Method
ALV Tool
Parameter
Remarks
Simple, two-dimensional table
T_TABLE
Table for structure and contents of the ALV output
Hierarchical-sequential list
(in CL_SALV_HIERSEQ_TABLE)
LEVEL
Hierarchy level whose structure you wish to change
T_TABLE
New table of hierarchy level
T_BINDING
List of up to five foreign-key relationships
(in CL_SALV_HIERSEQ_LEVEL)
VALUE
New table of hierarchy level
T_BINDING
List of up to five foreign-key relationships
Tree structure
T_TABLE
Initial table
Empty table, only sets the structure -
How to download subtotals into xl sheet while using alv list display
hi all,
i have a reqiurement i.e.
iam displaying the data by using alv list display. i have one option called Download in my PF-STATUS.when i click this button it downloads the data .now my requirement is when i cllick on subtotals list displays asubtotals according to the sales order no.now i click doenload button then it has download the data into xlsheet with subtotals and grandtotals.
anybody can send me the sample code plz.
thanks,
maheedhar.tHello Maheedhar
Using ALV lists you do not need a special function for downloading. Simply calculate the totals and subtotals on your ALV list and then press the (toolbar or menu bar) button <b>"Print Preview...".</b>
The print preview display a "flat" list including the subtotals that can be downloaded to Excel.
Regards
Uwe -
Editable field in alv list display
i WANT TO GIVE COLOR FOR EDITABLE FIELD IN ALV LIST DISPLAY.i TRIED WITH EMPHASIZE IN FIELD CATALOGUE ASSIGNING.bUT,IT IS NOT WORKING.HOW TO DO.tHANX IN ADVANCE.........
HI,
Please refer the link below:
http://www.****************/Tutorials/ALV/Edit/demo.htm
http://www.****************/Tutorials/ALV/ColorSALV/Demo.htm
Thanks,
Sriram Ponna. -
How to send the alv list display to spool
Hi all,
I am executing a program in foreground. My requirement is sending alv list output to spool. When i execute the smae program in background mode the SAP is handling the spool output in hierarchial list display. How to get the same output in foreground also.
Thanks and Regards,
Vijay.Hi max,
I think my question is not clear.
when I execute my report in background mode, I can able to see the output in the spool.
But when I execute the same report in foreground no spool output is getting generated.
To handle this I am calling some function modules like RSPO_OPEN_SPOOLREQUEST , RSPO_WRITE_SPOOLREQUEST, RSPO_WRITE_SPOOLREQUEST. But by using this i cannot able to get the desired output in alv list display format. what to do to get my desired output.
Thanks and Regards,
Vijay.
Maybe you are looking for
-
How to change the current period in material master
hi everybody, as i have installed sap 4.7 ides version on my home pc for practice , but hwenver i am creating the new material master in the system , i observe that in accounting1 tab the current period is 12 2002 , how should i change the current p
-
I'd like to format several external hrd drives to work with both my Mac Book Pro and a PC in the house. Disk utility says ok for esFat to wrok with both but techies say format as FAT. Also, does size of external have an influence on the formatting
-
PKI migration from 2003 to greenfield 2008 R2 plan-of-approach
Hi, I've done a lot of reading here already but I'm on a dead end. Here's my scenario: I have 1 Stand-alone root CA plus 2 Enterprise issuing CA's, all running Windows Server 2003. I'm trying to move all servers to a new OS platform: Server 2008 R2.
-
Microsoft Visual C++Runtime Library Runtime Error when refreshing plugin list
when i refresh the effects list, i get this runtime error: Microsoft Visual C++Runtime Library Runtime Errror Program: C:Program Files\Adobe\Adobe Audition 3.0\Audition.exe R6025 -pure virtual function call what do i do about this. if anyone has any
-
Sending CRM target group to BW
Hello, Could u pls tell me how to export a target group created in CRM to BW Thanks & Regards, Raju