Checkbox with more than one display column.

Hi.
I have a checkbox item which I reference in a process (stored procedure) in my page. I'd like to display more than one field for the item, in different columns.
The lov query allows only 2 fields, the display value and the return value.
For now I just concatenate the 2 display fields, but I would like to display them in 2 different columns.
Is this possible?
My other option would be to use a report and set the item type to a simple checkbox. Is it possible then to reference the values of the report checkbox in my process ?
Thanks in advance.

Any ideas anyone?

Similar Messages

Spatial index creation for table with more than one geometry columns?

I have table with more than one geometry columns.
I'v added in user_sdo_geom_metadata table record for every column in the table.
When I try to create spatial indexes over geometry columns in the table - i get error message:
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-13203: failed to read USER_SDO_GEOM_METADATA table
ORA-06512: at "MDSYS.SDO_INDEX_METHOD", line 8
ORA-06512: at line 1
What is the the solution?

I'v got errors in my user_sdo_geom_metadata.
The problem does not exists!

ADF Table with more than one TableSelectMany column

Does anyone know how to add more than one TableSelectMany component to a table? So, basically I'm trying to have two checkboxes for each row in the table
thanks,
Eric

Eric,
the TableSelectMany column is element of the selection facade which only takes one element.
To create additional checkboxes, you can - of course - add an additional table column to the table and add a checkbox to it
Frank

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Create a logical column with more than one data source

I'm having a problem to create a logical column with more than one data source in Siebel 7.8.
What I want to do is the union of 2 physical tables in one logical table.
For example, I have a "local_clients" table and a "abroad_clients" table. What I want is to have a logical table "clients" with the client data from the 2 tables.
What I've tried is dragging the datasources I need onto the logical column.
However this isn't working because it only retrieves the data from the first data source.

Hi!
I think it is not possible to do this just by dragging the columns to the logical table. A logical table can have more than one source, but I think each column must have just one direct source column.
I'm not sure, but maybe you should do the UNION SQL to get the data of the two tables. In the physical layer, when you create a new physical table, it's possible to set the "table type" as a "SELECT". I didn't try that, but it seems that it's possible to have the union table in the physical layer.
Bye.
Message was edited by:
user578388

Error while running spatial queries on a table with more than one geometry.

Hello,
I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
We are running Oracle Standard 11.1.0.7.0.
Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
What this script does:
1. Create table object1 with two geometry columns, geom1, geom2.
2. Create metadata (projected coordinate system).
3. Insert a row.
4. Create spacial indices on both columns.
5. Run a SDO_RELATE query on one column. Everything is fine.
6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
7. Clean.
CREATE TABLE object1
id NUMBER PRIMARY KEY,
geom1 SDO_GEOMETRY,
geom2 SDO_GEOMETRY
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM1',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
VALUES
'OBJECT1',
'GEOM2',
2180,
SDO_DIM_ARRAY
SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
SELECT *
FROM object1
WHERE
SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
DROP INDEX object1_geom1_sidx;
DROP INDEX object1_geom2_sidx;
DROP TABLE object1;
Thanks for help.

This error appears in GeoServer and SQLPLUS.
I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
Anyone knows what could cause an error like this "End of TNS data channel"?

Can a user facetime with more than one user at a time

I can use facetime with Macbook and connect to another Macbook user on another WIFI network... I was wondering if one can facetime with more than one user at a time?

ellis911 wrote:
I can use facetime with Macbook and connect to another Macbook user on another WIFI network... I was wondering if one can facetime with more than one user at a time?
Only if you have more than one device running FaceTime at your end.
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

More than one SDO_GEOMETRY columns in one Oracle 8i spatial table

I have a spatial table as follows:
CREATE TABLE TEST(
ID VARCHAR2(255) NOT NULL,
POINT MDSYS.SDO_GEOMETRY,
LINE MDSYS.SDO_GEOMETRY,
POLYGON MDSYS.SDO_GEOMETRY,
PRIMARY KEY(ID));
Is it a good practice to have more than one SDO_GEOMETRY columns
in one spatial table? What are the drawbacks if any to have a
spatial with more than one layer?

I have one question about more than one SDO_GEOMETRY columns
in one table in Oracle 8.1.7. When I wanted to create two
spatial indices for this table, every time I got some error.
Can anyone tell me how to figure it out?
Thanks very much,
Fan Fan,
You need to insert metadata record before creating spatial
indices.
Try the following:
REM USER_SDO_GEOM_METADATA :
REM insert a row for the geom layer for TEST TEST2 tables
REM
INSERT INTO USER_SDO_GEOM_METADATA
( TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
VALUES ('TEST', 'POINT', MDSYS.SDO_DIM_ARRAY
(MDSYS.SDO_DIM_ELEMENT('LON', -180,
180, .000005),MDSYS.SDO_DIM_ELEMENT('LAT', -90, 90, .000005)),
NULL);
INSERT INTO USER_SDO_GEOM_METADATA
( TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
VALUES ('TEST', 'LINE', MDSYS.SDO_DIM_ARRAY
(MDSYS.SDO_DIM_ELEMENT('LON', -180,
180, .000005),MDSYS.SDO_DIM_ELEMENT('LAT', -90, 90, .000005)),
NULL);
INSERT INTO USER_SDO_GEOM_METADATA
( TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
VALUES ('TEST', 'POLYGON', MDSYS.SDO_DIM_ARRAY
(MDSYS.SDO_DIM_ELEMENT('LON', -180,
180, .000005),MDSYS.SDO_DIM_ELEMENT('LAT', -90, 90, .000005)),
NULL);
REM create a spatial index based on TRAFFIC.GEOM
REM
REM
CREATE INDEX TEST_G_POINT_IDX ON TEST(POINT) INDEXTYPE IS
MDSYS.SPATIAL_INDEX;
CREATE INDEX TEST_G_LINE_IDX ON TEST(LINE) INDEXTYPE IS
MDSYS.SPATIAL_INDEX;
CREATE INDEX TEST_G_POLYGON_IDX ON TEST(POLYGON) INDEXTYPE IS
MDSYS.SPATIAL_INDEX;

Displaying more than one display attribute in a tree component problem

Hi,
I have a parent table and child table, I want to display a parent table's display attribute and below that i want to display child tables two display attributes (while defining the rule for a tree compoment).
What i'm getting is :
I can able to display more than one "display attributes" for my parent table, but when i'm trying to implement that for my child table under my parent table. I am only geting the blank folder structure without names.
For example:
Parent table: Deparetment(id, name)
child table: Employee(id, firstName, lastName)
What i want is:
In a Tree:-
(Department name): software below that i want display both (firstName and LastName) stephen Fleming
for that employee.

Hi,
do you use ADF ? If yes, have a look at "master table with inline detail" option when dragging the master View
Frank

Create a dynamic search in JSP with more than one datasource

Hello,
In the ViewCiteria tag you can specify the datasource in which you want to place the criteria. Is it also possible to work with more than one datasource ?
In my project I want one query form for specifying criteria for more than one datasource. When I send the query form, I want the right view criteria will be coupled with the right datasource.
Has someone more experience with that ???
Thanks!!!

Hi,
I think I got the same problem! I tried to combine all the tables in a new view and create a query on this view.
But when I search and my result has to be one record from the main table, I get this record more than once.
I tried to use distinct but that does not work because each column has a different value, so the record is never the same.
I hope someone can help us!

Table cell with more than one component

how can i make table cell with more than one component
like below, cell in column 3 contains few button
col0 | col1 | col2 |
a | b |[btn1] [btn2] [btn3]|
a | b |[btn1] [btn2] |
and when i click on the any of the button a dialog box pop up saying something..

Here's link to someone who did a lot with tables. Not sure about multiple buttons, but it should get you started.
http://www2.gol.com/users/tame/swing/examples/SwingExamples.html

Import AP Invoices with more than one Prepayment Application

Hi,
We have a requirement to import AP Invoices from the legacy system with more than one prepayment application to the invoice.
The AP_INVOICES_INTERFACE table provides only one column for Prepayment Number. Also, more than one line can not be created for the same invoice number.
Is there any solution to the above situation?
Gajendra

Dear Srikanth,
Thanks a lot for your reply.
We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
This is my question.
It will be appreciated highly if you give me a solution.
Thanks!
Xingjun Han

Reports 9i Graphs with more than one query..

Hello,
I am converting my 6i reports to 9i reports. On my graph reports with more than one query, when I invoke the graph wizard it changes the value of the src to the wrong query automatically. When I run my report, I am getting the error REP-0069 Internal Error rwlib-1: REP-6219 Column (Column Name) not in given cursor hierarchy. Although it's a pretty easy fix to go into the graph settings in the property palette and change it back, it is extremely frustrating. Has anyone else ran into this problem and did you find a permanent fix?
Thanks,
Laura

Hi Laura
One workround would be to create a new query in the Data Model that includes desired fields, and then source
chart to the new group.
FYi, bug2527100 was filed on this issue and is already fixed. The fix would be available in 9i Reports 9.0.2.2 patch. Reports 9.0.2.2 patch is scheduled to be released on Mar 05 2003 (tentative date).
Thanks
The Oracle Reports Team

Is there a stereo bluetooth headset that can pair with more than one device at a time?

Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
Appreciate any and all input. My Googling has returned no results.
Rick

TeslasBB wrote:
pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
You can only pair one device at a time to your 8330, or any other phone for that matter. The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again. Once you turn your bluetooth device on and the phone is on, they will find each other again.
Hope this helps,
John
Stevie Ray! 1954-1990
** Don't forget to resolve your post with the accepted solution.

Can I use a magic trackpad with more than one Mac at a time?

I am attempting to pair a MTP with a second MacBook Pro. So far I can't get system preferences to find the MTP.
I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac. To do this, you first remove the existing pairing and then pair the trackpad again'.
Can anyone advise, please?
If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
Thanks

Yes, your keyboard, mouse or trackpad can be paired with multiple Macs. You can even have multiple keyboards, mice or trackpads paired with one Mac. The caveat is that the device can only be connected to one Mac at a time. The device can't be paired or connected with a Mac while it's currently connected to another.
Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other. The device will connect with the first available paired Mac and then unavailable to the second. If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on. I do this with a keyboard from my iMac to a Mac Mini in another room.
Captfred

Checkbox with more than one display column.

Similar Messages

Maybe you are looking for