Checkconfig failed after install of SAP J2EE 620 on 4.7 ABAP system

Dear All!
We have installed the 4.7 ABAPfirst then installed SAP J2EE engine 6.20 according to the OSS note 545422. But when we do the check by following the instruction of the OSS note to start SAP J2EE administrator by Choosing Start --> SAP J2EE Engine 6.20 --> <Instance_number> --> Administrator and the login failed.
Can any one give us a hand?
Thanks!
Jason

Jason,
Ik have never started this through the Start menu, but always by starting the batchfile go.bat.
This can be found, just like the Unix methode in the note you mentioned.
That is: usr/sap//j2ee/admin/go.bat
Remember to create a connection through the dispatcher using port 50004.
Good luck!
Björn

Similar Messages

Error while installing the SAP J2EE add-on for SAP NW XI installation

Error while installing the SAP J2EE add-on for SAP NW XI installation
Posted: Jan 24, 2007 5:23 PM Reply E-mail this post
Hello,
When I am installing the SAP SAP J2EE add-on for SAP NW XI installation I am getting the follwing error:
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: Executable /oracle/XID/920_64/bin/sqlplus returns 127.. SOLUTION: See ora_sql_results.log and the Oracle documentation for details
Could some one help me to resolve this error and install the SAP J2EE add-on?
Thanks,
George

Hi George,
Kindly use the latest installation Masted in Service market place. That will possibly solve your problem.
Regards
Vivek

Pairing devices fails after install of osx 10.8.5.. It fails at my Iphone and Ipad touch during the pairing about 5 seconds after I confirm the 6 digit number. Does this make sense? Thanks for considering this.

Pairing devices fails after install of osx 10.8.5.. It fails at my Iphone and Ipad touch during the pairing about 5 seconds after I confirm the 6 digit number. Does this make sense? Whats the fix? I am moderately computer literate. Thanks for considering this.

The following entry may indicate a failing harddrive, so doing backups and replacing the harddrive may be in order.
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750,16 GB)
S.M.A.R.T. Status: Failing <-----------
A little bit about drive S.M.A.R.T. status:
"The most basic information that SMART provides is the SMART status. It provides only two values: "threshold not exceeded" and "threshold exceeded". Often these are represented as "drive OK" or "drive fail" respectively. A "threshold exceeded" value is intended to indicate that there is a relatively high probability that the drive will not be able to honor its specification in the future: that is, the drive is "about to fail". The predicted failure may be catastrophic or may be something as subtle as the inability to write to certain sectors, or perhaps slower performance than the manufacturer's declared minimum."
http://en.wikipedia.org/wiki/S.M.A.R.T.

Error while installing J2EE Add- In to the ABAP system

Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
Srinivas

Ananda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you.

HT4623 Is anybody having trouble with your ringer after installing OS 6.0 and using the new GPS system?

Is anybody having trouble with your ringer after installing OS 6.0 and using the new GPS system?

The good (?) news is many people are have OS 6.0.1 wifi problems.
I could not connect to my home network. What eventually worked for me (twice now), though it makes no sense, is to go to the particular connection you want to use, hit the little blue arrow on the right to get the details screen. Scroll down to the bottom and change "HTTP Proxy" from "None" to "Auto". Then leave the "URL" field that pops up blank.
This should not work. However, it has for me where many other suggestions have not.
*shrug*
Best of luck.

Installing the Java Add-In for an existing abap system

Hi, Currently we are Installing the Java Add-In for an existing abap system.
Following the steps (Installation guide):
1) We sucessfully installed the Central Services Instance (SCS)
2) We sucessfully Installed the Database Instamce Java Add-In
Our problem comes in the third step
3) Central Instance Java Add-In
When the system prompts me the SAP System Identification (Select the central instance of your local host).
I have a combo with two values: DVEBMGS00 of SAP System DEV and DVEBMGS00 of SAP System DEV
(The same value)
I chose anyone, and click next.
The system send me an Input error and says "Caught EKdException in Module call: single select return more than on row"
Any help is appreciated, and I will reward points if helpful.
Regards

I followed an advice made for a sap consultant, and delete some profile files.
I had the following files
DEFAULT.1.PFL
DEFAULT.2.PFL
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_DVEMGS00_bsomtymx005.BAK
DEV_SCS01_bsomtymx005
START_DVEBMGS00_BSOMTYMX0
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
after to delete the files, I have the following files
DEFAULT.BAK
DEFAULT.PFL
DEV_DVEMGS00_bsomtymx005
DEV_SCS01_bsomtymx005
START_DVEBMGS00_bsomtymx005
START_SCS01_bsomtymx005
Then, I restarted the installation, and the sapinst allow me to continue with the installation.
I really do not know if the installation will be sucessful, but this issue is solved.
Thanks shanji, I was working in another tasks, but with your help, I will try to resolve again this problem, and found the solution.

Error while Installing the Java Add-In for an Existing ABAP System

Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran Chebrolu

Hi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag

JCO difference between SAP J2ee 620 and Webas 640 for Internet Sales

Does anyone have some information on how Internet Sales manages JCO calls to R/3 or CRM on WebAS 640?
Till J2EE 620 the sapjco.jar file directory had to be in classpath along with the relevant dlls in WinNt directory.
WebAs 640 Java installation doesn't mandate any such steps.
How does this work? The jar probably is in the cluster/server/bin/ext folder but what about the native libraries? How are they loaded.
I am having problems making RFC calls to R/3 from a web application deployed on SAP WebAS 640.
This is not the internet sales application but a general J2EE application and I was wondering if i could use the same approach as used by Internet Sales to load the native libraries.
Any help would be appreciated.
Bharat.

Vivek,
We have the WebAs 640 Java system running on a AIX server. I placed the following folder under classpath
/usr/sap/<SAPSID>/JC**/j2ee/cluster/server/bin/ext/com.sap.mw.jco/sapjrfc.jar
The error thrown is
JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc [Can't find library sapjcorfc (libsapjcorfc.a or .so) in sun.boot.library.path or java.library.path
sun.boot.library.path=/usr/java14_64/jre/bin
java.library.path=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib:/usr/lib:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/JC15/j2ee/os_libs:/usr/lib:/lib:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib]. java.library.path [/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib:/usr/lib:/usr/sap/RID/JC15/j2ee/os_libs:/usr/sap/RID/JC15/j2ee/os_libs:/usr/lib:/lib:/usr/sap/RID/SYS/exe/run:/home/db2_mgr/sqllib/lib:/home/db2_mgr/sqllib/lib]
The problem is a search on libsapjcorfc.* only return dll files and no .so or .a files.
Wondering how ISA loads the native libraries on AIX!
Thx,
Bharat.

Hard Drive Fail after install Photoshop CS6?

Hi! I downloaded Photoshop CS6 six days ago. Three days later my hard drive failed... and now can not find the installation. The repair put my system back to a previous time when the computer worked fine. Did this erase the install???
Thanks,
CeCe1019

What is your operating system & version?
If Windows, how was the system reset - by System Restore? Or a complete restore from backup?
While a System Restore will leave the installed programs in your Program Files, all registry data and system files will have disappeared. So either way you will have to reinstall.

8i tnslistener failed after installing OAS in NT

I have 8i, webdb in nt machine. They work fine. After I
installing OAS 4.0.7, and reboot the machine, I can't connect to
8i anymore. I tried to use svrmgrl, it gives me following
message: Message 4505 not found; no message file for
producat=RDBMS, facility=MGR; Error while trying to retrieve
text for error ORA-12538. After I got to svrmgr and try connect
internal, it gives me: Message 701 not found; No message file
for product=RDBMS, facility=MGR.
I tried clean install 8i, webdb and OAS three times, got the
same error. I have searched all the 8i document, got no idea.
I am just curious: 1)what does these error message mean?
2)I found that after Install OAS and reboot the machine, the
TNSlistner won't start, is there any conflict between
TNSlistener and OAS listeners, they have different port?
Response is greatly appreciated.
Eric Liu
null

ORACLE_HOME problem????
-Try installing first OAS and then 8i (I don't know if is
possible). I have had the same problem installing first 8i and
then forms 6.0 (oracle installer 3.2 doesn't suport multiples
ORACLE_HOMES).
-Try installing in diferents ORACLE_HOME.
-Good luck with OAS ;-)
Jer
ERic LIu (guest) wrote:
: I have 8i, webdb in nt machine. They work fine. After I
: installing OAS 4.0.7, and reboot the machine, I can't connect
to
: 8i anymore. I tried to use svrmgrl, it gives me following
: message: Message 4505 not found; no message file for
: producat=RDBMS, facility=MGR; Error while trying to retrieve
: text for error ORA-12538. After I got to svrmgr and try connect
: internal, it gives me: Message 701 not found; No message file
: for product=RDBMS, facility=MGR.
: I tried clean install 8i, webdb and OAS three times, got the
: same error. I have searched all the 8i document, got no idea.
: I am just curious: 1)what does these error message mean?
: 2)I found that after Install OAS and reboot the machine, the
: TNSlistner won't start, is there any conflict between
: TNSlistener and OAS listeners, they have different port?
: Response is greatly appreciated.
: Eric Liu
null

Mac App Store fails after installing Mavericks.

After installing Mavericks i can't see updates in Mac App Store. Also Maps App only shows a plain colour.
Any idea to fix this problem?
Sorry for my bad english!
Message was edited by: Flacote
Everithing works fine after a several system reboots.

After installing Mavericks i can't see updates in Mac App Store. Also Maps App only shows a plain colour.
Any idea to fix this problem?
Sorry for my bad english!
Message was edited by: Flacote
Everithing works fine after a several system reboots.

HT4818 after installing boot camp 4 on mountain lion " Missing operating system"

Hello
I hade a small Windows 7 partition , so after updating to mountain lion , I wanted resize win partition .
I made an image of it , then deleted win partition from utility disk , ( wrong idea )
I didn’t notice that boot camp could erase win partition , anyway I have tried several times , and always after reboot boot camp
I get the same
Missing operating system .
If I boot from dvd install win or if i boot from the boot win partition.
hd and partitions looks OK to utility disk
Any idea to fix the problem ?

I presume that you've followed the instructions for sideloading the iMac Windows drivers into your install via USB stick? (wasn't aware the EFI recognized the SD slot as storage on boot. Now i know)
I always found more success in just slipstreaming the drivers and install.xml file onto a custom Win7 DVD rather than the USB approach when trying with my Late 2009 27" iMac. The Win7 installer needs that enclosed .xml file in the driver package to tell it where to find the drivers so that they be loaded when the Win7 image extracts itself.
If you're using mountain lion, then you should be receiving the proper Win7 driver set. If you wanted to create a custom image, then you can use an ISO file, the driver package and disk utility to make something you can use. Either that or you learn what edits your install.xml file needs to point the installer properly and check it manually.
I don't know what links you have so i'll just include everything:
Installing boot camp on a Late 2009 iMac:
http://support.apple.com/kb/TS3173
Direct link to Late 2009 iMac-specific Windows drivers.
http://support.apple.com/kb/DL995
I'd try a USB stick and the iMac-specific driver set. It should steer your insolent windows installer correctly.
Hope this helps.

Backup Fails after several successful days - errors "Device is not ready" & "The System cannot find the path specified"

Well I am back again, with another backup issue. After fixing one issue with the backup failing after a reboot, I have encountered another which is starting to cause me a lot of headaches.
The setup is thus - the backups run on a host machine running Windows Server 2012, this hosts three VM's (1x Server 2012 and 2x2008 Since the 19th of December a single backup drive has been attached for the backups (not ideal but the company had closed for
the holidays) up until the 26th these backups were working flawlessly.
On the 26th the backup completed with warnings, transferring a good 90% of the data to the backup (2/3 VMs). On the 27th it transferred a bit more at around 95% (2/3 VMs). On the 28th, it didn't completely backup a single VM.
On the 28th this error appeared in the event logs and after checking in the snap-in the same errors appear on the warning days as the errored day.
The backup operation that started at '‎2014‎-‎12‎-‎28T20:30:09.774946400Z' has failed with following error code '0x80780049' (None of the items included in backup were backed up.). Please review the event details for a solution, and then rerun the backup
operation once the issue is resolved.
Thanks in advance/

Hi,
Please check the detailed error message in the backup log files in C:\Windows\Logs\WindowsServerBackup. In additional, you could go through the similar thread to help troubleshoot this issue:
Windows 2012 Backup for HyperV failed with error code '0x80780049'
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f1a0c9c6-7b4c-409c-b4da-c145b8b59eb1/windows-2012-backup-for-hyperv-failed-with-error-code-0x80780049?forum=winserverhyperv
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

System failed after install essbase client on 11.1.2.3

I have done a install and config of 11.1.2.3 for essbase and planning
after completion I run the diagnostics green light all the way
i install the EAS Client Restart the server and then everything fails
Diagnostics
Generated on 08/31/2013 00:51 AM
Validation run on NextLevelServer
Build version: 11.1.2.3.0.8719
EPM System Diagnostics info: 11.1.2.3.0 drop 27 build 8414-on-03/21/2013 10:40 AM
OS name: Windows Server 2008 R2
OS version: 6.1
EPM System Instance location: C:\Oracle\Middleware\user_projects\epmsystem1
Test Status Service Test Description Duration
Hyperion Foundation
FAILED Audit Validating that Audit has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED CES Validating that CES has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Web Server: Pending
Configure Database: Pending
Configure: Pending
Configure Common Settings: Pending
Configure Oracle Configuration Manager: Pending
0 seconds
FAILED CSS Validating that CSS has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED EXT: External Authentication Checker execution failed.
Error: EPMCSS-00000: Failed to process request. Internal server error. Refer EPM Shared Services Security log file for related errors.
Recommended Action: Refer to the validation logs for exception details.
8 seconds
FAILED HUB Validating that HUB has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
PASSED WEB: Permissions All HIT entries are present in system-jazn-data.xml
0 seconds
FAILED LCM Validating that LCM has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
FAILED Single Sign-On Checker execution failed.
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
2 seconds
FAILED LNK: Registry Checking that all components in the registry have a link to host
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
0 seconds
PASSED CFG: Environment Checking whether system path variable length exceeds 2,000
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component SHARED_SERVICES_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED Registry Validating that Registry has been initialized
Error: Checker execution failed.
Recommended Action: Refer to the validation logs for exception details.
4 seconds
EPM System Registry
Essbase / Essbase
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Essbase Server: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Administration Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_ADMINISTRATION_SERVICES_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Integration Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Essbase Integration Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_INTEGRATION_SERVER_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Essbase Studio
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_STUDIO_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Essbase / Provider Services
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component ESSBASE_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Calculation Manager
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component CALC_MANAGER_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Performance Management Architect
FAILED AppMgrLoadAdf Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error: AppMgrLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
11 seconds
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Create EPMA Virtual Directory: Pending
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED DimEditorLoadAdf Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.DimEditorLoadAdf
Error: DimEditorLoadAdf failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
12 seconds
FAILED EnumApplications Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumApplications
Error: EnumApplications failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
11 seconds
FAILED EnumDataSyncs Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumDataSyncs
Error: EnumDataSyncs failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
11 seconds
FAILED EnumDimensions Launch external checker with next command: C:\Oracle\Middleware\EPMSystem11R1\..\jdk160_35/bin/java -DEPM_ORACLE_HOME=C:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=C:\Oracle\Middleware\user_projects\epmsystem1 -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=C:\Oracle\Middleware\user_projects\epmsystem1\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.EnumDimensions
Error: EnumDimensions failed on initialization. Please check all registry information is valid and that HSS is running.
Recommended Action: Make sure external checker is working.
11 seconds
FAILED PMAJ: EPMA Service Validating whether jobmanager service is available.
Error: EPMVLD-01006: The EPMA service is not available. Check the log files for details.
Recommended Action: Check that the server is running.
0 seconds
FAILED DSC: EPMA DimensionServer Server Configuration Validating EPMA Dimension Server hyperion-bpma-server startup... Failed...
Error: Dimension server was not found in Shared Services Registry.
Recommended Action: Check application is started.
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component EPMA_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Foundation / Workspace
PASSED CFG: Configuration Validating that configuration tasks have been completed
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component WORKSPACE was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
PASSED REG: Registry All links are present in the registry.
0 seconds
Planning
WARNING CFG: Configuration Validating that configuration tasks have been completed
EPMVLD-01004: The following configuration tasks have not been completed:
Configure Database: Pending
Register with Shared Services: Pending
Configure: Pending
0 seconds
FAILED REG: Configuration Checking if product has only one product node in registry.
Error: Component PLANNING_PRODUCT was not found in the registry.
Recommended Action: Try to re-config product.
0 seconds
Test start time: 08/31/2013 00:49 AM
Test end time: 08/31/2013 00:51 AM
Total test duration: 102 seconds
Please advise
this is the second time this has happen

What I am doing is again running the Start EPM system from Foundation services
and then I will check to see if the service are up
Thanks I try that
Restarted the epmsystem
but the Oracle database is down
have to find out how to start
database error
Database Instance: Hyperion
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below. Page Refreshed Aug 31, 2013 2:19:45 AM EDT
Database Instance
Host localhost
Port 1521
SID Hyperion
Oracle Home C:\app\Administrator\product\11.2.0\dbhome_1
Listener
Status Down
Host localhost
Port 1521
Name LISTENER
Oracle Home C:\app\Administrator\product\11.2.0\dbhome_1
Location C:\app\Administrator\product\11.2.0\dbhome_1\network\admin
Details TNS-12541: TNS:no listener
Agent Connection to Instance
Status Failed
Details ORA-12541: TNS:no listener (DBD ERROR: OCIServerAttach)
SQL*Plus: Release 11.2.0.1.0 Production on Sat Aug 31 02:50:09 2013
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORA-00119: invalid specification for system parameter LOCAL_LISTENER
ORA-00132: syntax error or unresolved network name 'LISTENER_HYPERION'
Disconnected
i went to server server and start the oracle listener
but the database will not start up
Please advise

Root.sh failing after installing grid 11g on Linux x86-64

Hi,
Am getting below error while executing root.sh after instalaltion of 11g grid for RAC.
[root@erprac2 ~]# /u01/app/11.2.0/grid/root.sh
Performing root user operation for Oracle 11g
The following environment variables are set as:
    ORACLE_OWNER= oracle
    ORACLE_HOME= /u01/app/11.2.0/grid
Enter the full pathname of the local bin directory: [/usr/local/bin]:
   Copying dbhome to /usr/local/bin ...
   Copying oraenv to /usr/local/bin ...
   Copying coraenv to /usr/local/bin ...
Creating /etc/oratab file...
Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
syntax error at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1129, next token ???
Global symbol "$p" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1130.
Global symbol "$host" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1130.
Global symbol "$p" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1133.
Global symbol "$p" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1136.
Global symbol "$p" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1137.
Global symbol "$host" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1138.
Global symbol "@host_array" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1138.
Global symbol "$p" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1139.
Global symbol "$host" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1139.
Global symbol "$host" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1141.
Global symbol "$rtt" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1141.
Global symbol "$ip" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1141.
Global symbol "$p" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1141.
Global symbol "$host" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1142.
Global symbol "$ip" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1142.
Global symbol "$rtt" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1142.
Global symbol "$p" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1146.
Global symbol "$p" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1147.
Global symbol "$ret" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1148.
Global symbol "$duration" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1148.
Global symbol "$ip" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1148.
Global symbol "$p" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1148.
Global symbol "$host" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1148.
Global symbol "$host" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1149.
Global symbol "$ip" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1149.
Global symbol "$duration" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1149.
Global symbol "$ret" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1150.
Global symbol "$p" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1151.
Global symbol "$host" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1154.
Global symbol "$host" requires explicit package name at /u01/app/11.2.0/grid/perl/lib/5.10.0/Net/Ping.pm line 1154.
Compilation failed in require at /u01/app/11.2.0/grid/crs/install/rootcrs.pl line 286.
BEGIN failed--compilation aborted at /u01/app/11.2.0/grid/crs/install/rootcrs.pl line 286.
/u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed

Hi Anil,
It says some library packages are missing .Did u check the cluster verify utility on all nodes in RAC? Its very mandatory. If not, Install all required packages on all nodes in a cluster and then try again.
Regards,
Pradeep V

Checkconfig failed after install of SAP J2EE 620 on 4.7 ABAP system

Similar Messages

Maybe you are looking for