CheckDB fails every Tuesday
Hi All,
I am facing a problem in a scheduled action of CheckDB.
This job fails every Tuesday ( Only ). The error messege gives following text.
<b>Variant &0000000000000 does not exist DB 612 A</b>
When I try to run it again it runs successfully. I don't get why this problem is occuring only on Tuesday and only at that time.
Can anybody suggest for the solution?
Regards,
Shamish
DB13 has lost its link with the SM37 job,
so,
to resolve this,
1. check SM37 jobs and delete the one that may have failed.
2. delete the DB13 jobs that keeps on failing
3. re-create job in DB13. link with an SWM37 job will be recreated.
note that this behavior is well-known after a system refresh.
Similar Messages
-
Iv downloaded the 0845 wizard from the App Store. Registered my details and it has been working. But for some reason it won't let me log in and keep saying failed every time I try to use it. Iv deleted and re-downloaded the app and it still says the same?
I would say to start by looking on their web site... unfortunately, that appears to be dead.
Based on the horrible ratings on the App Store (1 star for the current version), I'm not surprised it doesn't work well. -
Background job getting failed every day
Hi,
This background job getting failed every day.But this job was running fine initial periord.Please help me out this issue.
SAP_REORG_UPDATERECORDS
SAP_WP_CACHE_RELOAD_FULL
SLCA_LCK_SYNCHOWNERS
Regards
Naanas.If this is R/3, then none of the above jobs should exist in the system, if scheduled by default with other standard jobs, then these should be removed
Note 1034532 - Changes for standard jobs
Note 931436 - SLCA_LCK_SYNCHOWNERS standard job terminates -
I am getting error (-1) while updating my iPhone 4 to iOS 5.1. The phone has gone into a recovery mode. Restore fails every time at "restoring the firmware" stage. Striped bar remains for a long time, then shows "error (-1)" and the restore fails. I have been doing it for last 12 hours. Help!
Thanks for your reply Michalo. I am in India and here Apple care does not work on Sundays. I have been without my phone for the entire day. Perhaps tomorrow will bring some respite. There is not solution to "error (-1)" on any forum it seems. I found one forum which suggested use of Tiny Umbrella. Any idea about that?
-
I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.
Hi Emilemny,
Welcome to Apple Support Communities.
The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
-Jason -
Import from iphoto fails every time.
Import from iphoto fails every time.
It should not be a serious flaw, since this something that you only do ONCE. You don't want to use both organizer and iphoto. You'll have two sets of photos with no knowledge of each other. Import from iphoto is not meant to be a regular use item, only for the one time after you've decided organizer is what you prefer. It's fine to make a small test catalog while you decide whether iphoto or organizer suits you better, but to keep on using both is going to make you crazy in short order.
-
I am trying to convert a Microsoft Publisher Document to PDF but it fails every time although the reason is not clear. Anyone else had problems like this and how do I solve it? Thanks. Ray
Hi raythree,
I'm sorry that your PDF conversion is working. Can you please tell me if you're getting a specific error message? Knowing that can help pinpoint the cause of the conversion failure. However, here are a couple of things that you could try:
Clear your browser cache (steps to do this vary by browser).
If you're using a work computer, check with your IT team to confirm if you have firewall/proxy settings that restrict the ability to upload files to the Internet.
Try another web browser. A list of supported browsers for accessing the ExportPDF service is available here: http://www.adobe.com/acom/systemreqs/.
Also, note that there is a 100MB file size limit, so if your publisher file is larger than that, it won't upload to ExportPDF.
I hope this helps. But let us know if you need further assistance.
Best,
Sara -
HT4623 ios7.0.6 fails every time trying to update now what?
ios7.0.6 fails every time trying to update now what?
Are you updating over wi-fi, or cellular data? Or through iTunes. If you get the mesaage that the update is not available . Make sure you have the correct date and time on you phone. then try again.
-
My installation of Adobe Acrobat Professional 11 UE MAC ESSC fails every time I try it. I don't know how to contact Adobe to get help. I am running Mac 10.8.5. Galen Strawson
I don't have this machine but here are a few things you could look at; that is if you haven't already.
Things you could try:
Changing up the Bios Settings.
if it came with win 8. it is probably runs a uefi firmware. These often have a bios backwards compatibility mode. You could try checking those options and turn off secure boot and turn on the bios backwards compatibility mode and see if win 10 will install.
if it came with win 7, it may have a bios with those features not turned on; if that's the case try turning them on.
Note: you may lose/gain security features or boot speed by disabling or changing some of these features. But it may tell you if a uefi firmware or bios settings incompatibility that could be causing your installation issue. You could also try a different
HDD.
Also you didn't mention whether you were trying to install from a usb stick or if you burned the iso to a DVD. If you are trying from a USB and have a DVD drive. Try burning as a DVD. I had dell lattitude that would never install from my usb; it would start
installing but then it would stall, but from a dvd in the dvd drive it installed alright... kind of weird (I was installing win 7 not 10, so not sure whether it would make a difference on win 10.)
Win 10 may also run but the install is borking on your machine... this is unconventional and surely not recommended, but you could put that laptop hard drive in another machine and run the install. Then on the last reboot swap the hard drive back into your
laptop and see if it boots up.
This may allow you to try running the os and see how it works on that laptop, if that's your goal. -
I have been trying to update my cc info but for some reason it has kept saying the cc info did not match with the bank info so the transaction failed every time I made an attempt to download something even it was free. However, I saw my cc online got charged $1.00 everything I was trying to update my cc info ...why?
Im wondering why my post hasn't been answered yet. I did file a report with the BBB and I had a rude representative from Verizon call me named Steve. He said I can file all of the reports I want and I will just keep getting calls from him. I can understand why my phone couldn't be replaced because of the small crack. I guess I have to eat that one (but it sucks because the lollipop update is what caused the problems) but what about all of the data overage I had to pay for for trying to fix this phone because of a lollipop update. I dont think it is fair to have to pay that as well. In addition, because I have an east coast phone number but live on the west coast, I cannot have tech support after 8pm. Verizon has cut this off. Im very dissatisfied and I have been a customer of Verizon for 13 years. Im hoping for a response this time.
-
Although all my music shows on my laptop in iTunes it won't complete the sync process, the blue bar showing music disappears during syncing. My music actually shows on my phone as ready to download but fails every time, it's all been cleared and retried but fails
Although all my music shows on my laptop in iTunes it won't complete the sync process, the blue bar showing music disappears during syncing. My music actually shows on my phone as ready to download but fails every time, it's all been cleared and retried but fails
-
IPhone 5 iOS 7.1.4 Call failed every time when the other person hung up before me
iPhone 5 iOS 7.0.4 says Call failed every time when the other person hung up before me,
Is there anything I can do to about that please?Hey there Yonidawit,
It sounds like you are are getting a message saying that the call failed, when the person you are talking to hangs up. I have a few things to recommend here. First close all the open apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that restart the phone and test it out again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If that does not resolve it, try resetting your network settings:
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
From: iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Regards,
Sterling -
IPASCII Response fails every other poll.
IPASCII Driver object is used to retrieve (via Ethernet) data.
Request format works good.
My Request Format (RequestFormat):
"GET /data HTTP/1.0 \r\n\r\n" as per device manufacture Txt string and
(2) carriage return/line feeds
Response String looks good Object = (.Response)
Typical Response String
F|74.0|29.3|-999.9|74.0|29.3|-999.9|-999.9|-999.9|-999.9|-999.9|-999.9
|-999.9
Data is temperature from module, -999.9 are data inputs without temperature
probes attached...
RSV1.txt = (F)
RSV2.txt = (74.0)
ETC...
RSV1-13 data look good but fails every other poll
(Socket communications error 10053: Software caused connection abort).I have received the following response from NI engineers.
To review this issue -- the IPASCII object has a problem in that if you use the IPASCII object to query a web service that closes the
connection remotely after a request has been made Lookout will not close the local connection. This results in a "CLOSE_WAIT"
state for the local TCP port. Since the port is not closed, Lookout is not able to make a subsequent outgoing connection on the
same port. Lookout does appear to close the port when after it tries to make repeated connections, but this means for every time
you want to make a query you have to alternate between successful queries and comm failures. Most likely this was not found earlier
because for many Ethernet based instruments, a TCP connection is persistent, however web servers using the HTTP/1.0 protocol
close the TCP connection after every GET request and response. A corrective action request has been filed with our Lookout R&D
team and hopefully a fix will be available in future versions of Lookout. Thank you for your patience with this issue. -
I am trying to export the PDF file and conversion fails every time.
I am trying to export the PDF file and conversion fails every time. File is too large of too complex. What do I do? One file is about 55 mb and the other is 58 mb.
Try extracting part of the file and see if the extracted part can be Exported. If so, repeat with the next set of pages. When done, try to load all into the first file.
-
my software update fails every time I attempt to update. I have restarted the device, selected software update but when it get to the end of "preparing software update", it fails and says the update was not successful. any ideas?
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
Maybe you are looking for
-
Hi, I am deleting the vendor master records by using xk06 (mark for deletation) but this is individual marking. i would like to delete 500 vendors at a time not one by one i am also using OBR2 for the same but i am not so clear about that how it is w
-
Hi, Anyone know how to acheive these motion blur effects, like in this site. When you click on an image it zooms up in a blur? (in the site click one of the images behind the sketch book. Thanks....
-
Billling Type RE credits posted to COPA
Hi, The condition type that has been assigned to the billing type RE is associated with a balance sheet GAL account. We are not expecting to post this to CPA. The condition type not assigned to the CPA value field. Can some one explain the reason
-
HT201210 i had a error code 1 at restore mode
what can i do about a error code 1
-
Remotely select user-defined date - repost
Hello, I need some help here. I have posted this question before, but didn't get any response. Could someone tell me: Is there any way to select/update/insert user-defined data-type columns from/to a remote database? Thanks!