Checking ABAP Engine
Hello,
I want to know how to find whether ABAP engine is working in SAP systems or not.
Kindly guide me.
Advace Thanks.
Thanks for ur reply,
Currently I am working as proactive team member,Just monitoring SAP systems,
One of the check is to ensure that ABAP engine is up and running properly in all systems,In that I am using just SM51 transaction,If all the servers are in active status means the engine is up.
But actually what we are checking?
Similar Messages
-
RFC destination from XI ABAP engine to 4.5 B system
I tried to create an RFC destination from XI ABAP engine to 4.5 B system.
It does not work and gives an error.
<b>Error Details DETAIL: NiIGetSockName</b>
-Naveen.Hi Naveen,
First of all try to ping 4.5B system from XI system (Through TELNET)... This is to ensure the connectivity and the access. The error is not a common error, i suppose, So better first we check the phisical connectivity...
Plz. confirm...
Regards,
Audy -
Hi All,
I want to do XSLT mapping (ABAP Engine). How can i write XSLT mapping. can any one guide me.
Thanks,
Anil.Hi Anil,
Check these Documents.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
http://help.sap.com/saphelp_nw04s/helpdata/en/cf/406642ea59c753e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/55/7ef3003fc411d6b1f700508b5d5211/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/83/2200cb50d345c793336d9a1683163e/frameset.htm
Reward points if usefull....... -
SSL configuration for ABAP engine
Hi Experts,
Can you please tell me how to configure SSL on ABAP engine?
Can you please guide me in details of the first part i.e. installation of SAPCRYPTOLIB for ABAP part?
I am not getting the document properly.
I am telling you what I have done.
1. I have downloaded the SAP Cryptoghraphic library for my platform.Two files were there--one is CAR file and another is SAR file.
After that probably
1. I have to extarct the files ( which one SAR or CAR? and how (with which command?))
2. After extraction, I'll get a file libsapcrypto.so. I have to put this into $DIR_EXECUTABLE directory.
What should be the exact path for $DIR_EXECUTABLE?
I have checked that in my system $DIR_EXECUTABLE=home/<sidadm>
Please let me know the absolute path where I have to put libsapcrypto.so
3. I have to set the environment variable SECUDIR to the directory $DIR_INSTANCE/sec.
What should be the exact path for $DIR_EXECUTABLE?
I have checked that in my system $DIR_EXECUTABLE=home/<sidadm>
Please let me know the absolute path to be set for SECUDIR.
Thanks and Regards,
Moulinath Ray
Edited by: Moulinath Ray on Feb 2, 2009 12:41 PMHello,
pls see the very usefull Doku at:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/65/6a563cef658a06e10000000a11405a/frameset.htm
The values of Dir Instance and so on you will find in TA AL11.
Good Luck
Volker -
Install - ABAP Engine - superdba password failed error
Hallo,
I have the J2EE Engine in my PC installed, and everything works fine. Now I am trying to install the ABAP Engine, and I get the error
<b>"Check of the superdba user password failed. Check logfile XCMDOUT.LOG"</b>
The error appears when I try to set the password for the superdba (Step 2 of the installation -> Define parameters)
Does anybody know, what can I do?
Thanks in advance
JonesHi,
did you specify a password for the superdba user (=SYSDBA user) at some point during the installation? If yes, did you maybe use any special character?
Thanks & regards,
Roland -
Can we install SAP Netweaver 2004s, without installing ABAP engine on AIX?
Hi,
Can we install SAP Netweaver 2004s, without installing ABAP engine on AIX?
ThanksHi
Yes you can install java engine.Run sapinst from installation master cd and select only java engine installation.There will be check boxes abd you have to choose java engine.Also check the nwo4s installation guide.It will guide you throughly.Keep in mind to use correct jdk required for your kind of installatiom.
Reward points if useful -
Error in system logs of the abap engine
Hello All,
I got a incident for "error in system logs of the abap engine".When i checked in SM21,
13:50:18 BTC 024 001 SETUPADMIN SM59 Q0 W
SETUPADMIN deletes RFC destination
0000000000011DECBA9958E212E09B2C
05782 Background Processor No. 024 SETUPADMIN
1 SM59 /ITSC/DSA_PERIODICAL T Transaction Problem STSK
A destination has been deleted in SM59, destination
maintenance of RFC.
Problems can occur if this destination is still used in existing
ABAP
I checked in sm37,the job /ITSAM/HEALTHCHECK which
runs under the program /ITSC/DSA_PERIODICAL with frequency
10 mins is in finished state.
Kindly help me out, why this logs is always written in sm21 even if
the job got finished .
Thanks & Regards,
Harshavardhani have the same error but my first select is
SELECT QMNUM QMTXT QMDAT AUFNR OBJNR QMNAM QMART BTPLN IWERK BEBER INGRP EQUNR SERIALNR MATNR
INTO TABLE GT_VIQMEL
FROM VIQMEL
WHERE QMNUM IN S_QMNUM .
please tell me how to solve this error when i run 24000 raw this select dump.
ASAP
thanks
Eman elgammal. -
Hi All,
I am trying to implement an XSLT mapping on the ABAP Engine. I went to the Transformation Workbench(SE80).I have created 4 levels of packages (Structure->Main->then 2 more levels) and included Package Interface SAI_TOOLS in 'Use Accesses' tab.
I have also set com.sap.aii.repository.mapping.additionaltypes=R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine)
in the Exchange Profile.
Now I want to create the tranformation (ST or XSLT) so that I can see it in the Repository.
At which package level(1st to 4th), should I right-click and go to 'Create->More->Transformations' so that I can see this XSLT Mapping program in the repository?
I have followed all the links from help.sap.com but I am unable to get the desired result, i.e. see my Mapping in the Repository when I choose Mapping Program of type 'XSL->ABAP Engine', from the drop-down box in Interface Mapping.
Kindly help.
Regards,
Puloma.Hi Naveen,
I did as you told, i.e. keyed in the name of the ABAP Transformation program (mapping) name.I have not written any namespace for the Mapping program in the Interface Mapping Design, just the Program name.
When I execute my mapping from se80, it works perfectly.
I created this Transformation program at the topmost level (i.e. Structure package level).
But when I execute my scenario, I get the following runtime error in sxmb_moni:
Error in mapping program zpc_transfom2 (type R3_XSLT, kernel error ID UNCAUGHT_EXCEPTION).
What is wrong? Did I create the transformation program at the wrong level?
Regards,
Puloma. -
ABAP Engine Installation on AIX / Oracle
Dear Team.
We want to install the ABAP engine on the AIX / Oracle Clustered Environment on we have EP 7.0 installed.
Can anyone guide as to how this can be achieved.
Any help will be appreciated.
Thanks,
Prashant.same as above
I suggest getting a Basis consultant on site, someone, who knows HACMP, can have a look at your current configuration (quorum, clusters filesystem et al) and can give suggestions, what´s the best and safest way to setup an additional system and if you need downtime according to your configuration or not.
Markus -
ABAP Engine Installation on AIX Cluster
Dear All,
I want to install ABAP Engine on Clustered IBM Server environment with O.S. AIX and Oracle DB. I am new to AIX and Cluster environment. Can anyone help me with the installation guide, or any related documents in this regard will be helpful..
If possible please mail me the procedure / guide on [email protected]
thanks.
Prashant.Hi,
The required documents for installation are available on http://service.sap.com/instguides
Regards,
Siddhesh -
Performance of XSL Mapping in the ABAP Engine
Hi All,
Is the performance of XSL Mapping in the ABAP Engine better than java and graphical mapping. XSLT on the java stack has performance issue handling large documents.I want to know how far XSL Mapping in the ABAP Engine performs when compared to java/graphical mapping in the context of large inputs(>1MB).
Anticipating your valuable inputs.
Regards,
Sudharshan N AHi Sudarshan,
Please go through the below link for a very clear understanding of the performance of the Mapping techniques...
/people/udo.martens/blog/2006/08/23/comparing-performance-of-mapping-programs
Hope this helps
Regards
Kiran.. -
If we have latest SAP R3 that works on WAS 640 can I deploy WebDynpro for ABAP and use this ABAP Engine to do all the development. That way all the regular R3 deveopment as well as Web Dynpro ABAP development will be in Development box.
Is this ok to do? Any issues. Problems please let me know.WDA is only available in WAS 7.0 or Netweaver 2004s. So you need this release in order to have Web Dynpro ABAP.
REgards,
Rich Heilman -
STRUST Import Certificate to ABAP engine.
Hi All,
I'm importing Certificate into ABAP for first time.
Can you please tell me the steps to do that.
T-code: STRUST
SSL Client Ananymos
On the right panel click on Import and then browse the certificate?
I did browsed the zip file which contains 6 certificates and now I'm getting this error
"Cannot analyze certificat" after selection in "Import"
Can you please tell me the steps to completed the import of certificates into ABAP engine. so that I can use it in SM59 HTTP destination type G.
Is there any blog for that ?
Thanks
NewiHi,
Go through below links these might help you.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/a6/f19a3dc0d82453e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/14/29236de1864c6e8d46e77192adaa95/content.htm -
Is a simple ABAP Engine Licence available ?
Hello all !
After many tests, showrooms and procedures, I am convinced that WAS is the solution I need to pilot some of my SAP R/3 processes.
Now, I am wonderign which installation I could choose. My customer actually works on a 4.5C R/3 version and did not planned to upgrade to 4.7.
My only economic solution is to implement a second SAP server based upon WAS 6.20 in order to generate BSP applications that will control SAP Objects via RFC and Master Data via ALE/IDOCS.
I am trying an demo version called "ABAP Engine 6.20" that is able to do exactly what I want. So my question is:
Is there a SAP product that only licences an ABAP 6.20 Engine (a kind of R/3 BC without any modules)?
Thank you in advance for your answers.
Kind regards.
SebastienHi Graig,
I am afraid my question was not sharp enough.
I do not want to create showrooms ore basic things based upon the Miniwas 6.20 that I already have.
What I would like to do is to install and manage a real server for real situations.
Do you think I can have a prodution licence upon a WAS Kernell without installing a complete SAP product ?
Tell me if I am still not precise (I am French and sometimes I hardly find the right terms)
Kind regards.
Sebastien -
XI Installation requires ABAP Engine???
Hi,
We have a big landscape in our organisation.We are planning to install XI (NW 2004s SR2) machine also.
Our long term purpose with this installation is to replace the middlewares like Business connector,MQ etc.
I want to know that at present,whether I should install this XI with java stack only or should I install ABAP engine also thinking the above said thing in mind.
I am new to XI,so don't have much knowledge on this!!!
Can anybody provide some input on this?
Regards
SaurabhHi,
Integrating your SAP Business Connector with SAP XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/96ed2129-0b01-0010-2e91-c45e1fad0d03
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4f27ad80-0c01-0010-f8b8-c5e153a16ca1
XI installation guide
Installation Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
Configuration Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
Also this
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
Thanks
Swarup
Edited by: Swarup Sawant on Mar 7, 2008 11:37 AM
Maybe you are looking for
-
A complete message could not be read on socket
hello to everybody... I have a client swing application witch call in RMI a stateless ejb deployed on a WeblogicServer 8.1 sp5. The problem is that when we have a slow net I receive on the client the following Exception.The server don't receive the c
-
Cannot copy external hard disk as its asking for permissions
Not sure why my settings have changed, but now every time I copy data onto my external drive main directory it asks for my password. I checked and seems that my current user is read and write setting (prssing command i.) I also notice that on a few f
-
HT201386 How do I sync photos in Photos on my iPad and those in iPhoto on my Mac?
I Downloaded iOS 8 for my iphone and oPad, and am waiting fir Yosemite for my Mac. Since I have iPhoto on the Mac, how to I now sync that with the Photo photographs on my portable devices?
-
Which Get command will display all $True & $False parameters
Hi, I am a newbie when it comes to commands in the EMC. We have Exchange 2010. I have 2 mailboxes that should do the same thing but they do not. Both are calendar mailboxes (resource mailboxes I think maybe) and one mailbox is working correctly an
-
Moving from Windows to Macbook Pro what isnt easy to transfer ?
Following on from my Missus dragging me into our local Apple Store to drool over an iPad, i have decided i have to have a Mac Lap Top, for the last decade at least, i have only known Windows, thinking that Apple Mac's are ONLY for Proffessional Draug