Checking compatibilty of x86 for solaris10

Hi ,
I having desktop with celeron processor 2. 53 ghz 512 memory 80 gb seagate harddisk , I wanna install solaris x86 in that one is there way to chk the h/w compatibility before installing ,
I triied to install couple of times but after install it gives error the out of frequency in the monitor
thxs
TaD

Read the forums.
Go through (at least) the last three months' worth of postings.
Start with the Solaris-on-x86 Forum.
There are links to the Hardware Compatibility List in the posts.
There are links to the Hardware Check Tools that you run in Windows.
The information is all already here.

Similar Messages

Realtek PCIe GBE network card driver for Solaris10 x86

Hi Gurus,
My laptop has a Realtek PCIe GBE network card but I could not find the driver for Solaris10 x86 anywhere, can anybody help me with this issue?
Thanks

how about this?
http://homepage2.nifty.com/mrym3/taiyodo/eng/
other google hits indicate that there is a realtek driver in OpenSolaris.

TS3899 "cannot get mail" in iphone5 suddenly. been using iphone to check 2 email accounts for months now, one is gmail and not troubled. the other is thunderbird and i get this error message now. no settings have been changed or anything! ideas?

hey all, I have been getting the "cannot get mail" error message on my iphone5 suddenly.
ive been using iphone to check two email accounts for months now, one is gmail and not troubled. the other is mail from thunderbird and i get this error message now saying it is not responding. no settings have been changed or anything, it just suddenly stopped receiving mail on my device as of Tuesday afternoon.
Does anyone have iny ideas about why? i have yet to update to the new OS7 yet, could that be it?

'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Duplicate check on search term for BP creation in CRM

HI,
I want to do a duplicate check on search term for BP creation in CRM.
i found one BADI ADDRESS_SEARCH. But the method address_search is not getting called.
Is there any other BADI available? how can I handle this issue?

hello,
BP is BDT (Business Data toolset) enabled (you can check it by adding break point in FM BUS_PBO and executing BP transaction). You can add your check directly to standard view (the check will be executed each time when user pushes enter) or you could add you check to appropriate action (during saving etc.) there are number of actions which you could use it depends on your requirements. You can find a lot of info about BDT (if you are not familiar) in Wiki.
br,
dez_

HT5035 I have a credit from an Apple gift card. I want to buy itunes. When I go to check out it asks for my credit card info. How do I use the credit I have?

How do I use the itunes credit I have on my MAC? I received a gift card and loaded it on my MAC. I want to buy itunes. When I go to check out it asks for my credit card info. How do I use the credit?

Purchase and Redeem an iTunes Gift Card.
How to Redeem a Code > http://support.apple.com/kb/ht1574

Payment Method Supplement Check Deactivation in F110 for already posted doc

Hi,
Is there a way to Payment Method Supplement Check Deactivation in F110 for already posted documents.
The background: Some invoices are posted for a vendor when there is a pmt supplmnt method "L-large". Subsequently payment method supplement in vendor master was changed to 'S'. There is debit note posted with pmt method supp 'S' in document. Now while doing F110 system is splitting up the payments based on pmt method supplmt and theline item with debit balance is going in error because of debit balance. As a result the debit balance is not getting knocked off with the credit balance line item.
Request you to help us in finding out if there is any way to generate onlyone line item in F110. Please rule out the option of changing the pmt supplmt at document level.
Regards,
nikhil

Hi Nikhil,
If you are not changing the payment supplement in the document, F110 itself will not allow you to change that. You can possibly deactivate the Payment method temporarily in customizing, run the F110 with only the affected vendors. and activate back the payment method supplement in customizing. You can activate this under APP customizing (FBZP) "All company codes" under the control data section
Ron

How to config Check Digits function module for Student Number Validation

Hi SLCM Experts,
In the SAP-SLCM, How to use check digits function module for validate student number. Just only config it or need to customizing program.
*Any idea to student number validation in SLCM?*
Best Regards,
Suvatchai K.

Hi ,
Can you expalin it further ?
You configure the St. no in piq_matr . And set it as external or internal no. range which suits your business .
What is the validation you are looking for ?
Regards
Gajalakshmi

History report error: | An Exceptional Error occurred. Application exiting. Check the log file for error 5022

Hi all
I've got a error msg when try to generate a report using Cisco history report tool:
Error | An Exceptional Error occurred. Application exiting. Check the log file for error 5022
It only happens when choose report template: ICD_Contact_Service_Queue_Activity_by_CSQ_en_us.
User tried samething on other PC, it working fine.
only on user' own PC and only choose this report, error appears.
user runing windows 7 and do not have crystal report installed
tried reinstalled the software, doesn't work.
also tried this: (https://cisco-support.hosted.jivesoftware.com/thread/2041254) - doesn't work
then tried https://supportforums.cisco.com/docs/DOC-6209 - doesn't work
attached the log file.
thanks.

wenqianyu wrote:From the log file:Looks like you get a Login Window.Error message showed up after username/password be enteredThere is an error in the log: Error happened in comparing UCCX version and HRC versionYou may need to do a clean uninstall, download the Historical report from the server, and install it again on the PC.Does this only happen to one PC or to every PC with this application?Wenqian
I have completely uninstalled the HRC, and download from server install again -- still doesn't work with exactly same error.
this matter only happens on this PC, when user try same thing on other PC, it works.
so i think it not relate to server or account.

(Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

Hi All,
I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054" when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out
The log file stated that there were ongoing connections of HRC with the CCX (I am sure there isn't any active login to HRC)
|| When you tried to login the following error was being displayed because the maximum number of connections were reached for the server . We can see that a total number of 5 connections have been configured . ||
1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
|| Below we can see all 5 connections being used up . ||
2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
|| Once the maximum number of connection was reached it threw an error . ||
3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
Current exact UCCX Version 9.0.2.11001-24
Current CUCM Version 8.6.2.23900-10
Business impact Not Critical
Exact error message All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
What is the OS version of the PC you are running and is it physical machine or virtual machine that is running the HRC client ..
OS Version Windows 7 Home Premium 64 bit and it’s a physical machine.
. The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ?

We have had this "PRX5" problem with Exchange 2013 since the RTM version. We recently applied CU3, and it did not correct the problem. We have seen this problem on every Exchange 2013 we manage. They are all installations where all roles
are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth. None of those "solutions" made any difference whatsoever. The occurrence of the temporary error PRX5 seems totally random.
About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
Most people don't ever notice the issue because remote mail servers retry the connection later. However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
simply fail. Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
Is Microsoft totally oblivious to this problem?
PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
JSB

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

An out-of-sequence check is not permitted for payroll type B

We had to do advance payments for 4 pay periods for an employee through offcycle workbench. One of the checks was wrong so we had to reverse it. It is an out of sequence reversal. Now when i try to do a correction run , it gives me an error An out-of-sequence check is not permitted for payroll type B
How can i run the correction run now. Please help
Edited by: sagarika sharma on Aug 14, 2010 6:29 AM

Check with SAP note 1425764,696067 and 1127119.
Mohan

Error in loading the WSDL file. Check the error log for more details

Hello,
I am trying to create a Import Adaptive Webservice Model. I am using the WSDL:
http://www.abysal.com/soap/AbysalEmail.wsdl
I am getting the below error when I choose WSDL source as UDDI or file (I am not using any logical destination)
"Error in loading the WSDL file. Check the error log for more details."
Where can i see the error log? And what is the solution to fix this?
I am able to create the model if i save the wsdl locally on my machine and choose Local File System or File as the WSDL source. But at runtime this fails as the application tries to read the WSDL for metadata info and it looks into the application server for this file.
I also tried creating the old webservice model. And it is able to create the model. But I feel I need to use the new model as this one is deprecated.
Thanks,
Sachin

Hi
For the logs you can search in this directory
Goto Window->Show view->Other->PDE Runtim->Error Log
please try this may it would help you out, try to create a model for you Web Service using Web Service Model (DEPRECATED)
See this link:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/integration%2bof%2bweb%2bservices%2b-%2bdifferent%2bscenarios

How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.

How can you get the filter off if you can't remember the password? It's"pro con" and it wont even let me check out the rates for aflight.

You can check the file prefs.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and remove the line(s) related to that extension (procon.password).

Unable to check in .sda file for ess in the track for NWDI

Hi Gurus;
We have created the track and added the three dependencies along with PCUI_GP.We have imported these into the track.
However after placing the .sda file for ess under Jtrans/CMS/Inbox folder and adding it as software component to the track through Landscape Configurator we are unable to get the ess component under the checkin tab of the track in CMS. Please suggest why this is happening?
Regards;
Anzar Naik

Dear Anzar,
What is the error message you are getting. check the CMS logs for the more information.
Please check n verify location of the inbox folder when you click on checkin tab.
refer to SAP Notes 872892.
Best Regards
Arun Jaiswal

System don`t check an order number for CO account assignment

hi,
I have this problem. When I creta a sales order in CRM and then system creates as a follow up document a sales order in SD system don`t check an order number for CO account assignment. If I want to create a sales order not as a follow up document, but directly in transaction VA01 and I use exactly the same data system gives me a message " The CO account assignment object belongs to company code X, not Y
You want to make a posting in company code Y.
At the same time, a CO account assignment object was specified that is assigned to company code X.
This is account assignment object with object type ORD, and object key 1xxxxxxxxxxx...".
My question is why system don`t check order number when a sales order in SD is created as a follow up document and what should I do to correct this.
Regards,
Mateusz

Check note
a) 352261 or
b) 557562
thanks
G. Lakshmipathi

Checking compatibilty of x86 for solaris10

Similar Messages

Maybe you are looking for