Checking console connection on ASA

Hi all,
Need to confirm which config i should look for to make sure ASA has console connection enabled
i check on ASDM under AAA access serial option is not checked.
What should i look in running config to make sure console is enabled?
thanks
mahesh

Also,
Since you dont see the setting "checked" under ASDM that to my understanding just means that the Console connection doesnt use any external AAA server for authentication OR doesnt use local username/password to authenticate.
You should be able to get to the command prompt without giving any credentials. You will though have to give an enable password naturally when using the command "enable"
- Jouni

Similar Messages

Console Connection

I'm just curious if I've missed anything. Now that no one is making laptops with COM ports any longer, and it looks like desktops will soon be following suit, how is Cisco planning on handling the Console connection in the future? My laptop died and I am having a heck of a time reconfiguring routers, since many of them are in phone closets far away from the nearest desktop.
Paul

Well, for the short term, you can use some/most USB->RS232 adapters on the laptop.
Beware though: not all of them support "COM:x" style communication (or they support it, but just don't work with some terminal programs).
In the long term, I'd expect that Cisco will shift to USB. Most of the new stuff has some flavor of USB connection.
Blame Intel; they're the ones working so hard to get rid of the legacy connections (PS2 Keyboard, Mouse, and serial ports).
If you have a couple devices per closet, your other option might be a one, two or four-port terminal server; then you can telnet in from your desktop and save youself the walk to the closet.
It's still a serial connection to the device, so you can change IP addresses, masks, & such and reboot ...
The last time I checked, the two-port term servers were well under US$100.
FWIW
Scott

Telnet from Outside switch to DMZ switch connected to ASA.

Hi all,
I have switch b connected to ASA with fas0/40 under vlan 40.
ASA connection to this switch is under Vlan 3 which is DMZ.
OSPF is running between OSPF and DMZ switch.
I was trying to telnet from Outside interface switch to DMZ switch which goes through the ASA.
My question is is it possible from Outside Switch to ping the DMZ switch or telnet to it as connection has to pass by ASA ?
Thanks
Mahesh

Hello Mahesh,
Yes, as I said on my previous post
access-list outside_in permit tcp host outside_switch_ip host dmz_switch_ip eq 23
access-group outside_in in interface outside
If you want to check if everything is properly setup for that connection to work across the ASA do the following:
packet-tracer input outside tcp outside_ip_switch 1025 dmz_switch_ip 23
Remember to rate all of the helpful posts
Julio

Is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

is anyone else having trouble setting up messages with the new mountain lion software? I keep getting a notification that i cant sign in and it is saying, check network connection and try again, but i have full wifi bars, thanks, Justin

Install this to get X11 functionality back in 10.8
http://xquartz.macosforge.org/landing/
Worked great for me and others.
Jerry

Is there a risk of setting a console connection timeout and what is the recommended setting?

Is there a risk of setting a console connection timeout and what is the recommended setting? Please suggest if there is any best prctice documentation that can be referred.

Hi Henrik
depend on what you need or what your security policy says for my lab gear i use 60 minutes. because i know how can access this. if you have gear outside in insecure space set it to a minimum or disable the console. everybody how can access your gear can break in. simple restart and boot w/o config. and you are in.
it realy depends how secure is your space and how much security you need.
and than the settings for policy have to match, what sec do you have if your console login and logout is secure. but when you restart you can simple break in by starting w/o config and than load it.
HTH
Patrick

HT204053 When I try to login to my apple ID on my iphone 4 to use facetime, it will not work and tells me to check my connection? I have even tried creating a new apple ID but the same message appears

When I try to log onto my Apple ID to use facetime, it will not work and tells me to check my connection. I have even tried creating a new apple ID but the same message appears. I do not understand why this is happening, could anyone help me resolve this issue it is very frusterating that I can not enable facetime or imessage.

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

My facetime is asking me to verify my email address but i do it opened the email and verified than i get an error message saying could not verify email please check network connection. but i am connected to internet what do i need to do to access FaceTime

my facetime wont open it askes to verify email i gort the email verified it and then i wait for awhile than i get a message saying that facetime couldnt verify email and to check network connectivity but i am connected to the internet. what do i need to do to get my factime working again?

Hey Desireeesamaroon,
Thanks for the question. I understand that you are experiencing issues with FaceTime on your Mac. The following resource may help you troubleshoot these issues:
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Thanks,
Matt M.

I am having a major problem connecting to FaceTime. Message reads "unable to connect, check network connections". Yet I am online with Manila, Safari etc. any suggestions.

I am having a major problem connecting to FaceTime today. Message reads "unable to connect, check network connections". I am online, mail works, ex
Tc. This was not a a problem two days ago. Any suggestions?

Could be that the servers are overloaded today.

Error Message: The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version. The request failed with HTTP status 404: Not Found.

I have a web page that contains a ReportViewer control. I am trying to display a report, which is an .rdl file located on the SSRS server, in this ReportViewer control. I have set the ReportPath and ReportServerUrl correctly. I am
getting an error message.
Am I suppose to use an .rdlc file rather than a .rdl file? Does the web server configuration need to use a certain account?
I am getting the following error message:
The attempt to connect to the report server failed. Check your connection information and that the report server is a compatible version.
The request failed with HTTP status 404: Not Found.

Hi bucaroov,
The error "The request failed with HTTP status 404: Not Found." means the ReportServerURL configured in the ReportViewer control is invalid.
Please follow these steps to solve the issue:
Logon the Report Server machine.
Open the Reporting Services Configuration Manager.
Copy the Report Server URL from 'Web Services URL'.
Logon the application server(in this case, it is the server that host the web page), check if we can use the URL we got from step 3 to access the Report Server. If so, please replace the ReportServerURL in the ReportViewer control with this URL. If it is
not available, could you please post the error message.
Additionaly, we don't need to provide the extension for a server report. The ReportPath should be like: /<reports folder>/<report name>
For more information, please see:
Walkthrough: Using the ReportViewer Control in Remote Mode:
http://msdn.microsoft.com/en-us/library/ms251669(VS.80).aspx
If you have any more questions, please feel free to ask.
Thanks,
Jin Chen
Jin Chen - MSFT

When deploy: Wizard error a connection to the deployment share could not be made "check physical connection"

Hello everybody,
yet another issue with deploying a masterdisk. I will give you a short explanation of the situation.
I need to deploy Windows 8.1 PRO x86.
Using: Microsoft Deployment Workbench Microsoft Version: 6.2.5019.0
1. Reference PC: Windows 8.1 PRO x86 is installed on ORACLE Virtual Box.
2. I installed MDT on my workstation Windows 7 x64, where "C:\DeploymentShare\Windows8" is located.
3. To change the Unattended.xml file, I have second ORACLE Virtual Box with
Windows 8.1 PRO x86 with MDT, which connected to the DeploymentShare of Windows 7 x64.
- The reason is because the Reference PC is x86 and the Unattended.xml file can be changed only if MDT is installed on x86 Windows, otherwise it is not possible.
The image capture is successful.
Then I create bootable USB device using rufus-1.4.12.exe. I use: C:\DeploymentShare\Windows8\Boot\LiteTouchPE_x86.iso
I use a real PC (not virtual machine) and when the deployment starts
I see:
1 Welcome screen, where I select: Run the deployment wizard to install a new operating system.
2. The next screen is an error screen where I see the error:
"Wizard error
A connection to the deployment share (\\ComputerName\C\DeployemntShare )could not be made
DHCP Lease was not obtained for any Networking devices!
Possible cause: Check physical connection
I am relatively new with MDT.
Any suggestions are more than welcome.

Nick,
Thank you for the answer!
Yesterday, I figured out that I need to create an offline bootable disk.
The issue is caused, because creating a bootable disk with rufus.exe include only the ISO file and not the WIM file. That is the reason why during OS installation process it asks me for the shared folder...

I'm unable to login to facebook though I reinstalled twice, but as i try to login it gives an error message as timeout, connection failure or check internet connection.

Dear service provider, I'm unable to login to facebook even though i tried to uninstall and again reinstall as per the observation from the forum discussion.. but still it gives me arror as Timeout connection, or connection failure and check internet connection.. how to troubleshoot, pls suggest me..
2ndly I'm unable to search by some of the keywords in itunes. means iTune is not fetching the required information rather it gives no result found message..

Have you tried a hard reset of the iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, work through each of the troubleshooting suggestions in this Apple support document as necessary.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Iphone is not being recognized in itunes. Turned off phone, rebooted pc, checked all connections. Still no itunes recognition. What should I do?

iphone is not being recognized in itunes. Turned off phone, rebooted pc, checked all connections. Still no itunes recognition. What should I do?
Just received from Verizon.

Sorry, didn't notice that you were using OS X. Here's the troubleshooting steps for a mac:
http://support.apple.com/kb/TS1591. If this doesn't work, try reinstalling the Apple Mobile Device Service as described here: http://support.apple.com/kb/ht1747.

HT204408 FaceTime on imac don't work after installing mavericks, After log in it says: check internet connection and try again.

facetime stops working after installing mavericks. After login it says: check internet connection and try again. My internet connections are ok, I have both wifi and lan.

Please describe in detail what happened when you took all the applicable steps in the support article. That's the starting point for any further efforts to solve the problem.

IMessages is not working . It says to check my connection, but it's fine. What is this , how do I fix it?? Please help me :)

I just got a new iPod touch and when I was setting it up I upgraded it to 5.1.1. The problem is that
I can activate iMessages. It comes up saying I should check my connection so I did and it was fine.
How do I fix this???
I really want to get this working so please help me! :)

Go to Settings>General>TIme&Date and make sure it is set to automatic and time zone is correct.
- Go to Settings>wifi and change the DNS to Google's 8.8.8.8

Duplicate check for Connection Objects in CRM

Hi,
I want to implement a duplicate check for connection objects in CRM. The duplicate check shall use the address of the connection object and perhaps additonal attributes. I have found a duplicate check for business partners using the basis address service and TREX as index pool. However, I couldn't find a similar functionality for connection objects. Does somebody know:
1) How to implement a duplicate check for connection objects which is based on the address of the connection object?
2) Is there a way to use the TREX-based duplicate check which is integrated into the basis address service for connection objects?
Thanks in advance!
Best regards,
Frank

I also have a requirement to check for duplicate address at connection object level and we are using SAP data servies to validate the address. Can anyone share their experience.

Checking console connection on ASA

Similar Messages

Maybe you are looking for