Checking contacts changes

My phone has a feature where it lights up and says it's checking for any contacts adds/deletes. Seems to do it a lot when I go to use phone, so have to wait until it's through to use.  It also lights up in the middle of the night to check changes.  If I forget to turn the phone around, it lights up the bedroom.  Seems like once or twice a day would be enough.  How can I adjusts the frequency?

I have tried your suggestion 4 times.  3 times I picked morning and it
still did day and night.  I then picked late evening, but nothing changed.
What's the point of picking a time to update if it's going to update over
and over. I don't know about other people, but my contacts rarely change,
so why on earth would they have the phone check so often??  Once a week
would be fine, this is ridiculous.

Similar Messages

  • Contact changes not sync'ing

    contact changes made to laptop not sync'ing and showing up on IPhone

    I have a iphone 4 with 2400 contacts on iCloud, I really like the contact management and use with great satisfaction.
    I use a computer at work windows 7 and outlook 2010, I installed the panel icloud to sync contacts with iCloud.
    Here's the problem:
      When I insert / edit / delete a contact on iphone / icloud, the change is propagated in Outlook.
      if i insert / edit / delete a contact in Outlook, the change is propagated NOT on iphone / icloud.
    I have made ​​several attempts and tests.
    disconnected from the icloud control panel, logout / login, checks on plugin outlook add-ons, no positive results!
    is a known problem?
    is a known bug in the system?
    Any idea?
    thanks
      Francesco

  • Control-k key binding broken. How can I check and change my key bindings?

    I use the Terminal app a lot. Unfortunately I am not able to use the control-k shortcut to cut lines in the terminal anymore. How can I check (and change) the Terminal key bindings?
    Thank you!

    Basing on your input, you should get the following values:
    1) session keys
    SK_ENC: 6DCE2A99BACB5207A7A96A92F114D66C
    SK_MAC: 0D446132B168F75CD6F0A780693A4DD3
    SK_DEK: 19F7B0F94837F32874B29B5EFB7809F6
    2) host cryptogram
    1B781553209748EA
    3) Retail MAC
    01761103B810F00E
    Summing up, the External Authenticate command should have the following value:  84 82 01 00 10 1B781553209748EA 01761103B810F00E.
    Try to compare it with your results.
    Regards

  • HT1692 My contacts changed to a family members. How do I change them to mine?

    My contacts changed to a family members. How do I change them to mine?

    Not sure what this means.

  • How to check and change the dafault session timeout of the Portal?

    Hello,
    When leaving a portal page open without using it for a certain amount of time and then accessing it again the Session times-out.
    Where can I check and change this default time-out time in case I would like to extand it for the end users?
    Roy

    Hi Roy,
    Session timeout includes multiple settings (J2EE setting and SSO setting at User Management).
    Defining the Timeout in J2EE Session
           1.      Open file web.xml (path depends on the version of EP6.0. If it is based on NW04, then
    ..\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF
           2.      Enter a value in minutes under <session-timeout>. The value should roughly correspond to the length of a synchronization cycle. The default is 30 minutes.
    After a successful login, it receives a SSO ticket which is valid for longer duration (generally 8 hrs, default which you can changed using  "System Admin" as mentioned by Yoel.
    Thanks,
    Swapan

  • How to check mass change(vendor) done by any particular user .

    Hi,
    What is a transaction used  to check mass change(vendor) done by any particular user .
    Thanks,
    Dharmesh

    HI
    pls try this table CDHDR
    Thanks & Regards
    Phaneendra

  • When in mode dev to develop my website, I can't open buttons and PDF files to check my changes or somebody else's changes. What is wrong ? (I updated  Adobe Reader)

    when in mode dev to develop my website, I can't open buttons and PDF files to check my changes or somebody else's changes. What is wrong ? (I already updated  Adobe Reader)

    Oh no... NOT THE 99-PAGER!!! Anything but THAT!!!

  • How can I check and change the size of photo or doc in iPhone or any other app

    How can I check and change the size of photo or doc in iPhone or any other app

    You would need software form a third party to have this option.  The free software that comes with the 8600 doesn't have an option for that. Vuescan is the only software I could find that says it works with your pritner and has a descreen option.  You have to purchase it, but it will give you more advanced options than the software that came with the printer.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • IPhone 4s contacts dissappear and email address on contacts change to numeric

    Hey guys i kept on getting some of my contacts dissappearing and the email address on some of my contacts change to a numeric number. My iphone was running on OS 5.1.1 before i updated to OS 6. My contatcs are synchronising to my email, i cloud and yahoo email. Please assist

    Okay
    Great
    But this means an iphone4s cannot call another iphone4s via a email address as like other devices like ipod or ipad.
    My questions remains still unanswered.
    Also while calling a person thru a phone, I switch to Facetime mode and I and the front party are connected with Wifi. Will we be charged an airtime for the call or not.
    Thanks for efforts but i m still not able to conclude to the answer

  • BBP_PS_PROJECT_GET_LIST: Checks for Change Authorization.

    Hi,
    I have a custom SAP program that is required to fetch pertinent details from a project.
    The SAP function module BBP_PS_PROJECT_GET_LIST retrieves several internal tables is used for this purpose. 
    For some reason this function module, which looks like it should only retrieve information and cannot perform changes itself, checks for Change authorization to object C_AFKO_ACT.  As a result, users with Change access to projects can run this and get the appropriate results (in internal table IT_AFVC).  However, users with Display access only to projects do not have any data returned back in this same structure.
    Any idea on how to go about this problem?
    Regards
    Jibat

    Hi,
    See also the foll related  notes before you implement the corrections in the note 818342 based on your current SP level for SRM 4.0.
    Note 742314 - BADI for approver selection when adding/changing approvers
    Note 802581 - Error in call "BBP_WFLH_AGENTS_FOR_CHANGE_GET"
    BR,
    Disha.
    Do reward points for  useful answers.

  • Word 2013 - check box changes to False

    Hello,
    Situation: A user clicks New to open a form from SharePoint 2013. User completes all appropriate boxes, closes, and saves the file with an appropriate file name. When the form advances to the next user for review, the
    Resubmit check box changes to False.
    The XML Mapping Pane was used to insert the check box. Meaning:
    Click Developer on the ribbon.
    Click XML Mapping Pane.
    In the XML Mapping pane, right-click Resubmit > Insert Content Control > Checkbox.
    I have used this approach in the past to avoid the issue I'm describing, and it has always worked. When the form is Rejected, the Initiator must then revise the form and resubmit for review by selecting the
    Resubmit check box.
    Any ideas how to remedy this issue and ensure the check box never changes to False?
    Appreciate any feedback.
    Thank you,
    Gary

    Hi Gary,
    Welcome to MSDN forum.
    This forum is discussing about the Windows forms and the controls in Winform in Visual Studio. Your issue seems more related with customizations in SharePoint, I would move this thread to the more related forum.
    Thanks for your understanding.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • Cannot save contact changes in outlook, always reverts back to what it was before.

    Cannot save contact changes in outlook, always reverts back to what it was
    before. 

    Hi
    As per the information and details provided by you, to save the all contacts in Outlook, please follow these steps: -
    By default, when you double-click on a contact in Outlook, the new
    Contact Card displays for that contact. The Contact Card does not contain all the fields from the full contact editing window that opens when you create a new contact.
    The
    Contact Card also displays by default when you search for a contact. You can still open the full contact editing window when editing a contact or when searching for a contact. To switch to your
    Contact folder, click the People link at the bottom of the
    Outlook window or press Ctrl+3.
    I hope this information will be helpful for you.
    Thanks and regards
    Shweta@G

  • How to have a check on change bars and/or tags before generating a PDF

    Hi All,
    There were many instances where I have generated very huge books (over 1300 pgs), and realize that some chapter(s) (files) are printed along with the tags or the change bars on.
    To resolve this, I had to go back and regenerate the same book after removing those properties which is cumbersome.
    Is there any solution where I can have a check/popup, before generating the PDF, if any file(s) within a book has tags or the change bars on?
    Thanks and regards,
    Subhakar

    Hi Michael,
    Thanks for your response and apologies for not mentioning the FM version (9)
    that I am using.
    I am now able to clear the tags in all the files within a book by your
    suggestion to:
    1. Select all files within the book
    2. Go to View and select
    3. Select Show Element Boundaries (as tags)
        This will show the element tags in all the files
    4. Select Hide Element Boundaries. This option is visible and enabled only
    when I select the Show Element Boundaries.
    I am just curious and waiting for your response to have a check on Change
    Bars.
    Regards,
    Subhakar
    On Thu, Feb 3, 2011 at 2:29 AM, Michael Müller-Hillebrand

  • SFW5 (BF) does not show me Check / Activate Changes button in ECC 6 EHP4

    Hello All,
    i am facing a strange problem, i want to activate business Function 'HCM, Core Processes in Talent Management' (BF name 'HCM_TMC_CI_1') in ECC6 EH4 IDES system. I also have SAP enterprise SearchTREX installed and this component shows me dependency in green light in SFW5 tcode (that means all the pre-requisites are fullfilled).
    But in SFW5 tcode does not show me Check / Activate Changes button on the top bar, and if i see in menus its greyed out i am not able to activate the same.
    I tried to unlock client using tcode SE06 and SCC4 but nothign worked out.
    I even checked the authorization of user it has sap_all, SAP_new, IDES_IDA_SUP, IDES_SWITCH, R3_TRUSTED.
    I will appreciate any help on the same.
    We developed system from Homogenious Export Image provided by SAP to us.
    Mani

    Hello Mani,
    You have to check for the compitability and dependency of already activated Enterprise Extension. If an incompatible Extension set is activated than it wont allow other application to work. Please check and let me know if you require anymore information.
    Regards,
    Vinit Pagaria

  • What is the command to check the changes in the spanning-tree topology?

    What is the command to check the changes in the spanning-tree topology?

    Hi,
    Few commands which would help are:
    1- Show spanning-tree detail
    2-show spanning-tree detail | in ieee|from|occur|is exec  >> This will give from were the changes occuring- Ex:
    C6K1#show spanning-tree detail | in ieee|from|occur|is exec  
     VLAN0001 is executing the rstp compatible Spanning Tree protocol
      Number of topology changes 9536 last change occurred 00:00:29 ago
              from GigabitEthernet4/6
    3- show spanning-tree active  *& show spanning-tree root >> Will give you the root information.
    4-  show spanning-tree inconsistentports >> If there are any port which are inconsistent state due to STP features.
    STP running MST:
    ===============
    show spanning-tree mst configuration  >> Need to check and match the same outputs with the other switches running in the same MST domain/region.
    show spanning-tree mst detail
    show spanning-tree mst <name of the region>
    Debug on STP:
    ============
    debug spanning-tree events/bpdu >> would be good but to be run with more cautious.
    HTH
    Inayath
    *Plz rate if this info is usefull.

Maybe you are looking for

  • SWF Object and Internet Explorer

    I am experiencing some strange behavior with a SWF Im including in the following web page: http://www.bostonredevelopmentauthority.org/ The SWF displays properly on the first page visit in both Internet Explorer and Firefox.  If I navigate away to a

  • My itunes no longer plays music.

    My itunes no longer plays music. This is both songs from my library and any songs I select from the itunes store to sample.  I can still buy songs and they sync to my ipod but again they will not play on iTunes.  I have the latest iMac

  • Urgent: mwrchading  workbench and jsp ref in not up: says connection  reset

    Hi all, Urgent advise for the same, application is down as merchanding and jsp ref is no wroking.. here is log i found from /app/endeca/Workbench/workspace/logs.. i have tried to restart the tools and endeca http serverics however no go, please advis

  • How do I keep my iOS devices' apps separate?

    If I have an iPhone and an iPod touch, how do I manage the apps for each device separately in iTunes?

  • Applications crash when I try to print

    Everything was running perfectly for several months - then - for no rhyme or reason - every time I try to print anything from any application - the application from which I am printing crashes. I don't think it is the printer because when I uninstall