Checking errors with New-PSdrive

I created a PowerShell script to access a shared folder on a Windows server host.
The script looks like:
$User = "domain\user"
$PWord = ConvertTo-SecureString -String "password" -AsPlainText -Force
$Credential = New-Object -TypeName System.Management.Automation.PSCredential -ArgumentList $User, $PWord
New-PSDrive -Name N -PSProvider FileSystem -Root \\192.168.1.1\share1 -Credential $Credential -persist
It works fine if everything works as expected, but I can't see what happens if the New-PSDrive command fails.
I need to take different actions if, for example:
Credentials are not correct
The target server is not reachable
The share does not exist
The user hase no permission to access the share
How can I make my script check whaich error occurred and take a different action in the various cases?
Regards
Mario

Hi Mario,
I‘m writing to check if the suggestions were helpful, if you have any questions, please feel free to let me know.
If you have any feedback on our support, please click here.
Best Regards,
Anna
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

B2 Error with new MSI GTX 970 :(

Hi there team!
Just registered to try and get help. I spent around 6 hours researching + trying all the suggestions throughout many different forums, but the B2 error still persists. I am currently running the following spec:
Mobo - MSI Z68A-G43 (G3), with version 4.30 ( I flashed bios last night and still no help)
CPU - Intel® Core™ i5-2500K Processor, 3.5GHz etc.etc.
RAM - Corsair Vengeance 2x4gb at 1333MHz
GPU - MSI GTX 970 GAMING Twin Frozr V 4GB GDDR5
PSU - Cooler Master Silent Pro 700W
I have tried:
-Taking out the card and using the on-board graphics to flash the bios to later version, No help. (during this process, the B2 error does NOT show up)
-Upgraded the card to latest nVidia drivers, even uninstalled and re-installed them. No help.
-Upgraded all the drivers from MSI, i.e. chipset etc. through Live Update 6. No help.
When the card is in, I cannot even access bios, it just gets stuck at B2 screen for like a minute, and then carries on with the boot process. I am able to play games etc. after the booting, but this error for sure should not be there when the PC boots up. I didn't have any issues with my old GTX 560 TI. I've read different forums saying that it might have something to do with the mobo thinking that something has to be connected to the on-board graphics; or that flashing BIOS helped a lot of users, but not me :(.
I don't have a second PC to test the card on.
Literally, I would try anything, please someone just help :(( This card is a beast and I wanna be able to properly use it and not having to worry about this error.
Thank you very much guys, hope someone can help!

Quote from: gabe_dimitrov on 08-February-15, 20:40:51
Man thank you so much! It is finally working!!! Thank you!!!! ))) It is showing correct version in BIOS, does not show B2 error whatsoever, all done! )
Thanks for your time! You can close thread, but it's very useful for anyone that has this issue!
Wich version of BIOS do you have installed? Can you OC your processor with new BIOS?

Still getting Javascript error with new version of UIX

I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
It's working fine with old version.
We had used proper cabo directory. These files are in sync with the version of the runtime
Here is our finding
I found a error in _updateFormActions() function from MarlinCoreb2.js file.
In this function it is giving error at
if(a8!=a6)
a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
working properly without any javascript error.
This problem is a bit tricky....
Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
and it also works on the Mozilla Firefox browser.
Can any one advice on the same?
Thanks in advance
Anindya

I answered this question on a different thread.
Do NOT post the same question multiple times. If you require more complete or prompt assistance than you receive on these forums, contact Oracle Support.
-brian

Javascript error with new UIX framework

Hi,
I'm facing some problem after changing my UIX framework version (2.2.3030829.1626).
Currently I'm using UIX version (2.2.3030829.1626) . Paging with table is not working with new frame work .
It is giving me javacript error "object doesn't support property or method" when clicking 'Next' .
It's working fine with old version.
Any help is much appreciated.
Thanks and Regards,
Anindya

Thanks Brian for your prompt reply
We had used proper cabo directory. To confirm it we have done it once again.But we're still getting the same error.
here is our finding
I found a error in _updateFormActions() function from MarlinCoreb2.js file.
In this function it is giving error at
if(a8!=a6)
a7.action=a6 line (line # 1841,1842). If I comment out this two lines page is
working properly without any javascript error.
This problem is a bit tricky....
Because it seems to be a problem with the UIX framework that only occurs on some versions of the Internet Explorer. On some version (IE 6.0.2600.0000) it works fine
and it also works on the Mozilla Firefox browser.
can you please advice is there any solution
Thanks in advance
Anindya

Validation Errors with new Install of W7 x64 Ent Debug Checker On New Equipment

I am receiving multiple Errors. I am trying to use the Windows 7 x64 Enterprise which happens to be the Debug Checker version OS as the host machine. I have only built the machine, and tried to load the Drivers.
I say this due to the starting issue that upon the loading of the entire driver set, (for the MB, Seagate Harddrive, and Vid Card), I would get the BSOD. I identified that the Bluetooth driver was the issue. I then did not load the Bluetooth
drivers for the MB on the 5<sup>th</sup> or so install of the 7 Ent os. (Tried Server 2k8 r2. Which is not compatible with the MB Drivers.)
I have not received a single Update either. The Auto update feature claims that I am up to date. I do not believe this due to the fact that any fresh Install of any OS has about several decades of updates and reboots to go through.
Upon trying the suggestions on the forum about turning off the IE Addons, the errors remain. Also the results of the sfc /scannow are copied below.
My Questions
I am seeking assistance on solving the Errors that have refused to leave me alone , to put it humorously and am asking for your insight and wisdom. Will you take a look??
Do I need to go to Win 7 Ent or Ult x64 that is not a Debug Checker version.
Are there other Microsoft download Registery file checkers besides the MGA Diag tool that are freeware that I can use to check, for corrupted registry files.
Or do I just need to take it to the stores (Fry’s and Microcenter) that recommended the equipment and have them just reload the software and allow them the headache of solving the error issue, by paying them to install the drivers and have ALL of the
drivers work. (including the blue tooth)
The Goal is to turn it into a Active Directory Server using Virtual Box with Server 2k8 R2 running in the virtual box environment.
Errors and Results.
There are also a number of logs that show various Crit, Error, and Warning logs. I will include those if need be.
This is the majority of the error messages, and I have missed the opportunity to capture others.
Internet explorer encountered Validation errors:
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : comctl32.dl
iii.
Assert offset: 00133A2A
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 008BE823
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0040F9E8
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : iertutil.dll
iii.
Assert offset: 001DEC51
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 00014159
Validation Error
i.
Process Name: iexplorer.exe
ii.
Module Name : mshtml.dll
iii.
Assert offset: 0000000000B221DB
Microsoft Management Console Encountered a Validation Error
Validation Error
i.
Process Name: mmc.exe
ii.
Module Name : ieframe.dll
iii.
Assert offset: 00000000006C9283
Scripted Diagnostics Native Hot encountered a Validation Error
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : urlmon.dll
iii.
Assert offset: 00000000001A0A73
Validation Error
i.
Process Name: sdiagnhost.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017f32
Windows System Assessment Tool encountered a validation error
Validation Error
i.
Process Name: winsat.exe
ii.
Module Name : KERNELBASE.dll
iii.
Assert offset: 0000000000017F32
Windows Explorer Encountered a validation Error
Validation Error
i.
Process Name: Explored.exe
ii.
Module Name : thumbcache.dll
iii.
Assert offset: 00000000000300BE
AI Suite 2 encountered a validation error
Validation Error
i.
Process Name: AI Suite 2.exe
ii.
Module Name : ntdll.dll
iii.
Assert offset: 000686BD
the number “2” is the substitutedfor the roman numeral 2
I believe that this is part of the MB Suite.
My the environment is a new equipment, and Downloaded student software. Windows 7 Enterprise SPK 1 Debug Checker, Valid Key with the software download. Activated on 8-12-2012
Motherboard: Asus p9x79 Deluxe, Part number: 90-mibh50-g0aay0kz
Chip Set: bx80619i73930k
2x Memory: cmx16gx3m2a1600c11 Corsair
Video Card: Diamond R7870 2GB DD OC 2xDVI/HDMI/2xDisplayport memory Clock 1250 MHz
Hard Drive: 9jb1n3-574 (leave the last two didgets off when searching in the browser) This is a Seagate 2TB
Generic optic drive: SH-222bb/bebe Samsung
Here is the Microsoft Fix It error code
Assertion Failed!
Program:…
File: d:\w7rtm\ds\security\cryptoapi\pki\...\newstor.cpp
Line: 2131
Expression: pStore->dwState = = STORE_STATE_OPEN || pStore->dwState = = STORE_STATE_OPENING || pStore->dwState = = STORE_STATE_DEFER_CLOSING || pStore->dwState = = STORE_STATE_NULL
For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts
(Press Retry to debug the application – JIT must be enabled)
                Abort    Retry     Ignore
Abort
Closes the program
Retry
Repeats the error
Verbatim
Ignore
Closes the program
Nothing happens
Here is the Microsoft Genuine Advantage Diagnostic Report
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-*****-*****-8C7YB
Windows Product Key Hash: cezvXJ2/mUhIEFxJfWkZ3IN8EQQ=
Windows Product ID: 55041-146-2397786-86942
Windows Product ID Type: 6
Windows License Type: Volume MAK
Windows OS version: 6.1.7601.2.00010100.1.0.004
ID: {EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}(1)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Enterprise
Architecture: 0x00000009
Build lab: 7601.win7sp1_rtm.101119-1850
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 109 N/A
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: c:\Program Files (x86)\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
File Mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070003]
File Mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0x80070003]
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{EBD85729-DBBB-479F-AB15-EBC0DDE0CC28}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.004</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-BBBBB</PKey><PID>55041-146-2397786-86942</PID><PIDType>6</PIDType><SID>S-1-5-21-4234423899-2489109333-1931045272</SID><SYSTEM><Manufacturer>System
manufacturer</Manufacturer><Model>System Product Name</Model></SYSTEM><BIOS><Manufacturer>American Megatrends Inc.</Manufacturer><Version>1103</Version><SMBIOSVersion major="2" minor="7"/><Date>20120409000000.000000+000</Date></BIOS><HWID>CFBA3607018400F2</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Pacific
Standard Time(GMT-08:00)</TimeZone><iJoin>0</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM/><GANotification/></MachineData><Software><Office><Result>109</Result><Products/><Applications/></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Enterprise edition
Description: Windows Operating System - Windows(R) 7, VOLUME_MAK channel
Activation ID: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 55041-00172-146-239778-03-1033-7601.0000-2252012
Installation ID: 000792957432055771547065313840421702569731971164600080
Processor Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use License URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product Key Certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial Product Key: 8C7YB
License Status: Licensed
Remaining Windows rearm count: 5
Trusted time: 8/12/2012 5:47:25 PM
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: N/A
HealthStatus: 0x0000000000000000
Event Time Stamp: N/A
ActiveX: Not Registered - 0x80040154
Admin Service: Not Registered - 0x80040154
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: OAAAAAEAAgABAAEAAgACAAAABAABAAEAHKJu3XDSdMRkx4ieoGkwung0ipvkrmTRDIsORc6qNCE=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name           OEMID Value     OEMTableID Value
APIC                                    ALASKA
A M I
FACP                                   ALASKA
A M I
HPET                                    ALASKA
A M I
MCFG                                 ALASKA
OEMMCFG.
SSDT                                    AMICPU
PROC
Scan Now Results
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>sfc /scannow
Beginning system scan. This process will take some time.
Beginning verification phase of system scan.
Verification 100% complete.
Windows Resource Protection did not find any integrity violations.
C:\Windows\system32>

Thank you for your valuable time.
I have performed the Chkdsk and the memory Diagnostic tool as per the suggestions.
The Memory Tool did not find anything amiss.
As per another thread I am going to try flashing the bios as well with the updates.
Following are the Chkdsk results.
Are there any other suggestions?
Chkdsk Results
Checking file system on C:
The type of the file system is NTFS.
A disk check has been scheduled.
Windows will now check the disk.
CHKDSK is verifying files (stage 1 of 5)...
89600 file records processed.
          File verification completed.
221 large file records processed.
0 bad file records processed.
1596 EA records processed.
44 reparse records processed.
CHKDSK is verifying indexes (stage 2 of 5)...
131874 index entries processed.
Index verification completed.
0 unindexed files scanned.                                           0
unindexed files recovered.                                       CHKDSK
is verifying security descriptors (stage 3 of 5)...
89600 file SDs/SIDs processed.
Cleaning up 36 unused index entries from index $SII of file 0x9.
Cleaning up 36 unused index entries from index $SDH of file 0x9.
Cleaning up 36 unused security descriptors.
Security descriptor verification completed.
21138 data files processed.
CHKDSK is verifying Usn Journal...
36120296 USN bytes processed.
Usn Journal verification completed.
CHKDSK is verifying file data (stage 4 of 5)...
89584 files processed.
File data verification completed.
CHKDSK is verifying free space (stage 5 of 5)...
476262075 free clusters processed.
Free space verification is complete.
Windows has checked the file system and found no problems.
1953410047 KB total disk space.
48065140 KB in 61610 files.
     43468 KB in 21139 indexes.
         0 KB in bad sectors.
    253139 KB in use by the system.
     65536 KB occupied by the log file.
1905048300 KB available on disk.
      4096 bytes in each allocation unit.
488352511 total allocation units on disk.
476262075 allocation units available on disk.
Internal Info:
00 5e 01 00 ef 42 01 00 ef 95 02 00 00 00 00 00 .^...B..........
e3 00 00 00 2c 00 00 00 00 00 00 00 00 00 00 00 ....,...........
6d 00 75 00 69 00 00 00 00 00 00 00 00 00 00 00 m.u.i...........
Windows has finished checking your disk.
Please wait while your computer restarts.

Check battery error with new and old batteries.

I came back from vacation last month, and the battery on my late 2006 Macbook would not charge. The Apple store said the magsafe connector was bad, and replaced it for $98. The next day I had the same problem, and when I took it back they said that now it was the logic board. None of the "geniuses" had any idea what was the failure was just swap parts until it works. I now have the "Check Battery" condition, and no idea what that means. I am sure that if I take it back to the Apple store they will say buy a new $100 battery, after all this one has three cycles on it! Dose anyone know what Check Battery means, and what conditions set this message, and how to clear it?

Thanks Carolyn. It appears that battery condition is set during a recalabrate only. It would be nice if Apple would produce a “white paper” on battery management for Li-ion batteries. There are no significant “trade secretes” in the management software that have not been reverse engineered long ago. Information as to what Recalibrating really does when it “Recalibrates”. What it means when Apple says the design life is 300 charge cycles. Information about how battery life is a statistical function, and may fail at 150 cycles, or may go 1000. What information the battery sends to the computer, and what the computer sends back. This would help eliminate the many posts on these forums, and people getting frustrated with the lack of information from Apple.

Upgrade to Yosemite, iPhoto won't open and NTFS-3G could not mount error with new external HD

Help!
I just did a software update to get OS X Yosemite 10.10.2 on my MacBook Pro.
Now iPhoto won't open and I get this error:
"Your photo library is either in use by another application or has become unreadable....Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup."
So I do this and try to repair the database as suggested and I get another error:
"iPhoto will open as soon as the iPhoto library is available. Time Machine might be backing it up."
But it's not - no external hard drive is connected.
I'm terrified I can't get access to my photos (and I admit I haven't backed up with Time Machine for over a year - my mistake that I won't make again).
So I bought a brand new external hard drive (seagate for mac and pc, 2TB) so I could save only my photos to the hard drive (because I googled and read you can manually save your photos to disk by dragging and dropping the photo library onto the external hard drive).
But I can't even get the hard drive to work....I get this error
"NTFS-3G could not mount /dev/disk2s1
at /Volumes/Seagate Backup Plus Drive because the following problem occurred:
/Library/Filesystems/fusefs.fs/Support/fusefs.kext failed to load - (libkern/kext) link error; check the system/kernel logs for errors or try kextutil(8).
the MacFUSE file system is not available (71)"
I google the issue again and it says to uninstall NTFS-3G but I actually think I just deleted it a long ago without uninstalling it properly?? I don't know....
(a) how do i fix iphoto
(b) how do i get external hard drives to work with this OS (I've read lots of posts and don't really understand the advice)
(c) how do i get all my photos onto the hard drive safely so I can import them onto a PC
Any assistance would be magic for this little lady!

(c) how do i get all my photos onto the hard drive safely so I can import them onto a PC
First see if you can reformat the EHD to MS-DOS FAT with Disk Utility. If you can
open iPhoto and select all of the Events in the Events mode. Use the File ➙ Export ➙ File Export menu option and export to the EHD with these settings:
Select the destination for the export to be the EHD or a folder on the EHD. This process will create a folder for each Event in your library with the same name as the Event and contain the original image files. The EHD will be useable by a PC and the photos will be available also.

Service entry sheet error.with new material group for services

Dear Experts
We need to create material group for roll shop spare parts service,we created a new material group.
when we are creating PR/PO with item category as D and a/c assignment K( entered cost center here).its giving error message
as RC= 3M8 47 Account determination for entry JSL KBS J001 not possible(while making service entry sheet)
after that i changed PR/PO and gave cost center and G/l account.now the service entry sheet is accepted.
is it necessary give G/L account manually,if user chose wrong G/L account how to avoid this problem.
please clarify me,
do we need to assign valuation class for material group for services?(where to assign)
or
should assign G/L account manually to cost center while creating PR/PO
Please clarify me
Regards,
Varun
Edited by: madhu varun tirupati on Sep 8, 2010 2:48 PM

Hi,
Option-1:-- >
Without creating material group and you can use your other service material group(existing service material group) and create a service master in AC03 as spareservice. Create a Service PO with text as roll shop spare parts service with other details as required like quantity of service, cost center & G/L account etc. After service being completed you can do SES in t.code: ML81N
Option-2:-- >
If you want report at the end based on different material/service group level, you can create a material/service group in OMSF for roll shop spare parts service and then you can assign to valuation class to material group in OMQW t.code. Then carry out regular process service order, SES etc.
Based on requirement, you can enter G/L account manually or can set default G/L account in purchasing document with help of t.codes: OMSK, OMQW, OME9, OMGO & OBYC
For error u201CAccount determination for entry JSL KBS J001 not possibleu201D, you cannot assign KBS transaction/event key to an account in OBYC t.code. Only you can assign G/L account to cost center with your CompanyCode in OKB9 t.code. Check the SAP note: 364570 & 106981
Regards,
Biju K

Multiple Errors with New iTunes

Hi Folks,
What's up with the most recent version of iTunes.
1. I'm trying to burn a CD (playlist) and iTunes is trying to analyze or "Determining the Audio Volume" for my podcasts. It also says 225 and I don't have that many.
2. Print a cover for my CD. It freezes when I want to change the print features. Will not print, can't close window, etc. I have to re-start my system.
3. My previous posting is for a missing iTunes Help -- nothing there.
4. If I'm burning a disc with iTunes I can't open an IE or Firefox Browser. It complete jams my computer.
What's up with this recent version.
Do I need to complete uninstall again. May be I should just go back to an older version since the newer versions have too many bugs or problems.
Thanks, katy

I should add that as of this morning iTunes appears to opening fine and reading my iPod (which is inexplicable because I haven't done anything with it since my 1st post.) iTunes still, however, will not save my library. I keep getting error message {-1450}. Also, every time i open iTunes, I am asked to agree to the user agreement, as if i had just downloaded the program.

SQL Server 2012 Management Studio Displays Error With "New Query" and Intellisense Works Intermittenly

I was upgrade to SQL Server 2012 and Visual Studio 2010 was upgraded with SP1 the same day.  This is x64 machine.
Microsoft SQL Server Management Studio      11.0.2100.60
Microsoft .NET Framework      4.0.30319.261
Operating System      6.1.7601
Problem 1) With SQL Server Management Studio, selecting "New Query" a warning box is displayed: "The 'Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010Package, Microsoft.Practices.EnterpriseLibrary.Configuration.Design.VisualStudioIntegration2010,
Version=1.0.0.0, Culture=netutral, PublicKeyToken=null' package did not load correctly.    The problem mayhave been cuased by a configuration change or by the installation of another extension. You can get more information by running the
application together with the /log parameter on the command line, and then examining the file ...\AppDate\Roaming\Microsoft\AppEnv\10.0\ActivityLog.xml'. Continue to show this error message?
Problem 2) In a Query Initellisense works intermittently but most of the time it will not display anything. I have tried Edit|Intellisense|Refresh Cach size and also seperately, Edit | Intellisense | List Members but neither has helped. Also
tried different selections for Tools|options| T-SQL | Intellisense| Maximum Script Size; no luck either.

Hi WallyJim,
For your first problem, possible workaround:
In Programs and Features (or Add/Remove Programs), right click the Microsoft Enterprise Library 5.0 Optional Update 1 program and select change. Remove the VisualStudio2010 integration.
Then, install the EnterpriseLibrary Configuration extension from Microsoft via the Extension Manager in VS2010. This will allow you to launch the configuration editor from VS2010, but will not be installed for SSMS.
For more information, please refer to
https://connect.microsoft.com/SQLServer/feedback/details/620532/error-message-on-new-query-window-opening.
For your second problem, the following conditions might affect the behavior of IntelliSense:
There is a code error above the cursor.
The insertion point is inside a code comment.
The insertion point is inside a string literal.
The automatic options are turned off.
For more information, refer to Troubleshooting IntelliSense (SQL Server Management Studio):
http://msdn.microsoft.com/en-us/library/ms173434.aspx.
Thanks,
Maggie
Please remember to mark the replies as answers if they help and unmark them if they provide no help. This can be beneficial to other community members reading the thread.

Outllook error with new emails

Hi
I'm getting this message
The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action
HOWEVER
Its only with email addresses I havent used before, other emails are going through just fine - any ideas please???
Thanks

Hi,
Seems something is wrong with the Check Name.
Please first try to create a new mail profile in Control Panel and reconfigure your email account in the new profile to check the result. See:
http://support.microsoft.com/kb/829918/en-us
In addition, this issue may occur when the HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders registry key does not contain all of the required data. Specifically, these problems occur if the
AppData string value is missing from this registry key.
NOTE: The \User Shell Folders key also contains a string value called
Local AppDatawhich is different from the value called AppData. The value that causes this problem (if it is missing) is the
AppData value.
To resolve this issue, import the User Shell Folders registry key from a working Windows User Profile. For more information, please refer:
http://support.microsoft.com/kb/2264398/en-us
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Error with new Room Template (containing KM Navigation iView)

Hello,
I created a new room template based on a newly created workset which just contains the KM Navigation iView. As I went through the template wizard step by step (Content Administration > Collaboration Content > Room Template Administration) I didn't add any External Parameters (Step 3) and didn't add any extensions (Step 4). In the Mapping (Step 5) I mapped all internal parameter to "room_id" since I didn't know it any better. Then I created a room based on this template. When I entered the room I got the following error message. Is it possible that the following error has to do with the fact that I mapped all internal parameters to "room_id" and that I did not add any external parameters or any extensions?
com.sap.portal.pcm.Title
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.ip.collaboration/Rooms/20dcad45-aaaf-2910-3289-d797c9b4a1ae/workset/km_documents/kmnavigationiview
Component Name : null
Page could not create the iView.
See the details for the exception ID in the log file
Thanks a ton for our help!
Katharina

Hi,
Maybe you can post this issue in the portal platform forum. This may get you more results.
Rgds,
Soujanya

Error with new function u00E9lement is not in use

I designed quickly a new function in the backend with no input and only output which give me the url off the bsp server. (since there is nobody in the house who can make the iview bsp template)
I select the function from find data and put it in the model which gives the output to a store. when I deploy I get an error 1.1
element 'z retrieve http server' is not in use
anybody any clue what to do ??
kind regards
arthur de smidt

thanks for the help but I already find out what happenend. I had linked my function direct to a store but apperantly there is no trigger for the function to execute since it is on it's own without input needed. apparently I have to trigger it to implement it in a flow or something like that
kind regards
arthur

50.5 Fuser Error with new fuser installed

Our HP Color LazerJet CP6015 Printer stopped working because of a "50.5 Fuser Error". We ordering and installing a new Image Fuser Kit (220v) but it still shows the same error message. Anyone have any ideas how to fix the problem?

Hi,
You might have more luck on the bussines forum, this is the consumer forum and your unit is considered a bussiness unit, so the bussiness forum might be a place where you get a better answer.
Find it with the link below.
http://h30499.www3.hp.com/
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Although I work for HP my posts and replies are my own
Please mark the post that solves your problem as "Accepted Solution"

HDCP error with new HDCP compliant monitor

I just bought a new Asus VE228H monitor. I have a ATI Radeon HD 4200, HDCP compliant video card and I am running Windows 7 and iTunes 12.1.1.4. Even though the new monitor is HDCP compliant, I still get an HDCP error in iTunes. I replaced the cable with a new HDMI cable and I still get the error. I have tried searching online for a solution, but haven't found a solution. Thanks in advance for your help.

SUCCESS ....... for now ......!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
i have now got my atv2 unit to power back on - and we can play the rented SD movie which is playing now to a happy family....
No HDCP error message appeared this time.
This what we did to fix our issues....
1) Pressed the HDMI cable more firmly into the HDMI port into TV - this allowed the ATV2 to actually show/reappear onto the tv panel.
2) Plugged both power leads for TV and ATV DIRECTLY into wall. (Previously, we had both AC leads plugged into a 4x multi power board and had this plugged into the wall.
We started the SD movie and no HDCP error appeared and movie is still playing as i type...
Now, to repeat this error/diagnostic, we then plugged the TV power lead back into the 4 x multi power board and plugged the board back into the wall. Immediately, the dreaded HDCP error re-appeared. We then replugged TV back into wall directly and no HDCP error message.
Hypothesis #1 :
Now, this 4 x multi power board also had our DVD player and stereo connected to it. Perhaps our DVD (potential recording device) was being detected and hence the HDCP barrier came up so that we were not able to record this movie.... just a hunch but sounds plausible.....
Hypothesis #2 :
Also, this 4 x multi power board was within immediate vacinity of the ATV2 unit. Possible interference.....
When the 'dust' settles and the family finishes watching the movies, (1 x HD , 1 x SD), i will plug the 4 x multi power board into another AC wall socket way out of the way of the ATV2 unit (around 4m) and try to repeat this error to validate my hypotheses - noted above.
I will report findings later in around 6 hours...
thanks for your help people...

Checking errors with New-PSdrive

Similar Messages

Maybe you are looking for