Checking existance of a database

How can i check the existance of a database through query.
regards
Saqib

Hi,
There is no explicit API call to do that. I would suggest either checking for the existence of the file (at the OS level) or you could try not specifying the DB_CREATE flag on Berkeley DB Database open. That will generate an error which you can check if the database does not exist.
Ron Cohen
Oraacle Corporation

Similar Messages

  • Error : Opening a rowset for "Sheet$" failed. Check that the object exists in the database.

    Hi,
    i am trying to load the data from excel sheet using For each loop container in ssis 2005.
    But it gave me the below error:
    Error: Opening a rowset for "Sheet1$" failed. Check that the object exists in the database.
    [DTS.Pipeline] Error: "component "failed validation and returned validation status "VS_ISBROKEN".
    Error: There were errors during task validation.
    Could you please let me know the solution
    Regards
    Sqlstud

    That message usually means validation has failed;
    Have any of the underlying tables changed?  Data types, lengths, maybe even column ordering, etc...?
    try this..
    Right-click on the Data Flow Task and select Properties. Then set DelayValidation =TRUE.
    Let us TRY this |
    My Blog :: http://quest4gen.blogspot.com/
    Thanks ETL.
    Everything is fine..(Datatypes,length,orderings etc)
    Already i have set
    DelayValidation =TRUE.
    IS there any other problem?
    Regards
    Sqlstud

  • Error: SNAP_ADT does not exist in the database - manual check required

    Hello Friends,
    We are  performing an upgrade+migration to HDB using the DMO option(Oracle to HANA).
    We are getting below error in the phase MAIN_SHDCRE/SUBMOD_SHDDBCLONE/DBCLONE!
    Also find the output of SE11 & SE14 attached.
    SE14->
    Please help us with the manual check.
    Regards
    Sury

    Hi Sury,
    In regards to the error below:
    1EETGCLN Error: SNAP_ADT does not exist in the database -> manual check
    required
    1EETGCLN SNAP_ADT
    1EETGCLN Table does not exist
    Could you please try to activate the following tables via SE11?
    -  SNAP_ADT
    Once they are activated, Could you please repeat the phase and update the result?
    Thanks and Regards,
    James Wong
    Follow us:
    SAP System Upgrade & Update Troubleshooting Wiki Space.
    SAP Product Support Twitter  ( Hashtag: #NWUPGRADE)

  • Excel Source - Opening a rowset for "EFT$" failed. Check that the object exists in the database.

    Why oh why do I sometimes get this error when defining my Excel Source and then sometimes I do not?
    Am I doing something wrong here???
    The error is...
    Exception from HRESULT: 0xC02020E8
    Error at Data Flow Task [[Excel Source[27]]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
    Error at Data Flow Task [Excel Source [27}}: Opening a rowset for "EFT$" failed. Check that the object exists in the database.
    I know the Worksheet "EFT" exists because I defined this previously for the same Excel spreadsheet.
    Thanks for your review and am hopeful for a reply.
    PSULionRP

    A reply from CozyRoc must be hitting the nail on the head
    sheet name contains $
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ce0fbff5-f5f1-4a4a-9c29-6adc32b0fd79/using-excel-file-as-source-in-data-flow-task-of-ssis-bi-2005-need-example-of-sheetnamecellrange?forum=sqlintegrationservices
    Arthur My Blog

  • How to check odi master repository exist in oracle database?

    Is there way to check the ODI master repository is exist in oracle database or any api to test that?
    Your help much appreciated.

    Thanks for you reply,
    That's fine, i think you aware of that, once open the topology manager "topology.bat", you can test the master repository, if you give any existing database user but its not master rep user, that throw exception "Master repository is not installed on this connection".
    I want know what are tables and data's are getting verified during the connection test.
    I think If you know regarding above my question, that will solve my problem.
    Thanks

  • Example of generating excel dynamically in ssis? geting error [Excel Destination [190]] Error: Opening a rowset for "Excel_Destination$" failed. Check that the object exists in the database.

    example of generating excel dynamically in ssis? geting error [Excel Destination [190]] Error: Opening a rowset for "Excel_Destination$" failed. Check that the object exists in the database.

    Hi Vijay
    Can you be little bit more specific, did you receive this error when you are designing this pacakge using BIDS
    Becuase when you are designing this pacakge in BIDS, you need to manaually create a excel sheet manually for the first time you run,
    are you creating excel sheet using execute sql task and excel connection with input from a variable?
    Did you receive this error in validation phase or execution phase ?
    Can you share your query to create table in excel ?
    http://sqljunkieshare.com/2012/02/28/how-to-create-and-map-excel-destination-dynamically-in-ssis/
    Use the above post

  • DBIF_RSQL_TABLE_UNKNOWN Table AUSPN_V1 does not exist in the database with ID R/3

    Hi All,
    We are encountering numerous short dumps in our system caused by Table AUSPN_V1 does not exist in the database with ID R/3.
    Can anyone advise how to solve the issue? Please find below portion of the short dumps.
    Category               ABAP Programming Error
    Runtime Errors         DBIF_RSQL_TABLE_UNKNOWN
    ABAP Program           SAPLCLVF
    Application Component  CA-CL-CL
    Date and Time          11.06.2014 12:08:28
    Short text
         A table is unknown or does not exist.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLCLVF" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         A table is referred to in an SAP Open SQL statement that either does not
          exist or is unknown to the ABAP Data Dictionary.
         The table involved is "AUSPN_V1" or another table accessed in the statement.
    Source Code Extract
    Line  SourceCde
      104     if dupl = kreuz.
      105       insert auspc_v2 client specified from table auspcv2
      106                              accepting duplicate keys.
      107     else.
      108       insert auspc_v2 client specified from table auspcv2.
      109       if syst-subrc ne 0.
      110         message a585 with tabausp.
      111       endif.
      112     endif.
      113     refresh auspcv2.
      114   endif.
      115   read table auspcv3 index 1.
      116   if syst-subrc = 0.
      117     if dupl = kreuz.
      118       insert auspc_v3 client specified from table auspcv3
      119                              accepting duplicate keys.
      120     else.
      121       insert auspc_v3 client specified from table auspcv3.
      122       if syst-subrc ne 0.
      123         message a585 with tabausp.
      124       endif.
      125     endif.
      126     refresh auspcv3.
      127   endif.
      128   read table auspnv1 index 1.
      129   if syst-subrc = 0.
      130     if dupl = kreuz.
      131       insert auspn_v1 client specified from table auspnv1
      132                              accepting duplicate keys.
      133     else.
    >>>>>       insert auspn_v1 client specified from table auspnv1.
      135       if syst-subrc ne 0.
      136         message a585 with tabausp.
      137       endif.
      138     endif.
      139     refresh auspnv1.
      140   endif.
      141   read table auspnv2 index 1.
      142   if syst-subrc = 0.
      143     if dupl = kreuz.
      144       insert auspn_v2 client specified from table auspnv2
      145                              accepting duplicate keys.
      146     else.
      147       insert auspn_v2 client specified from table auspnv2.
      148       if syst-subrc ne 0.
      149         message a585 with tabausp.
      150       endif.
      151     endif.
      152     refresh auspnv2.
      153   endif.

    Hello
    Please check on transaction SE11 if this table exists and if it is active.
    Also, it may be a database issue. What is your database?
    BR
    Caetano

  • SE14 Status-UPGRADE-Table does not exist in the database

    Folks,
    I have created a ztable with SPRAS and few Char fields and generated a table maintenance generator.In the Dev it is working fine but when I moved the TR to Q TR ended up with errrors "Generation of Programs and Screens".When I check in Q in SE11 I am able to see the table but with an error message "Table doesn't exist in the database".
    SE14 Status for this table is getting shown as UPGRADE in Q.
    Can anyone here throw some light on what exactly this status UPGRADE means and how it gets set in SE14.
    In DEV,I had checked the DATABASE OBJECT>>CHECK>DISPLAY and RUNTIME OBJECT>>CHECK>>DISPLAY and it is showing Database object is consistent but where as the same in Q is showing "Table is not created in the Database".
    K.Kiran.

    Hi.
    Is Q system is newly copied? Also please check the transport order of the table creation request. Also check whether pwd of the DB user is locked?
    Regards,
    Vimal

  • Licecache table missing Table MATRIXINDE does not exist in the database wit

    Hello,
    We recently done a system copy of our APO system, everything went well. in case of Livecache there are 2 problem
    1) when we do the integration for LCA/LDA/LCA while we mentione the Livecache server it is not taking the host name , it is only picking the IP address of the livecache server. If we tried host name, it times out.
    2) once we give the IP address as livecache server  we can start the live cache server. Bure there is only two tables in it
    when we run
    transaction Livecache Check (/SAPAPO/OM03) we get the erro i.e.Table MATRIXINDE does not exist in the database with ID LCA
    runtime error DBIF_RSQL_TABLE_UNKNOWN
    When we look into the tables there are only 2 tables in it
    AAPSYSNAME
    LCA_WARNINGS
    when I compare with other system...it is missing a lots of other tables..
    We did re-initialized the livecache.
    Appreciate your help in this

    Hello Sudhir,
    1) Did you create the SAP ticket where this issue is reported?
    2) It's good to know more details about the APO version, liveCache/LCA versions on your
        source & target systems.
        What note or document did you follow to do a system copy of our APO system?
    3) Please pay attention to the recommendations in the SAP notes:::
             877203     Post steps after the Homogenous liveCache copy usi u2026
             886103    System Landscape Copy for SAP SCM
    Thank you and best regards, Natalia Khlopina

  • View-does not exist on the database

    Hi Experts,
       Our Data Source/Extract Structure (R/3) is based on a view.
    There is an Issue with the View/DAta Source
    If i go to SE11>view Name> Display then i am getting
       'View ZART_ATTRS is not in the database' and then the next screen is the view definition
    This is a database view which is defined in the ABAP/4 Dictionary but does not exist on the database. No data can be read for this reason
    If i go to RSO2 and enter data source name and select display...
    Then it will display data source status as 'Saved' how can i activate it
    and i go to RSA6 select my Z data source which is based on the above view....context menu display data source/Check data source...when i get error
    'Only Tables and views are permitted for extraction'
    How can i overcome it

    Hi,
    As your view is existing in ABAP DICTIONARY , you need to take help of your DBA to get this created in the underlying database. This can be created using Database utility se14 transaction code. But it is good to have your DBA involved so that you have proper table space allocated to it.
    Hope this helps..
    Regards
    Manga(Assign points if it helps)

  • "Delivery 80001021 does not exist in the database or in the archive"

    hi,
              i am creating delivery document and save the delivery but while I'm checking the delivery doc no the system is showing following error "Delivery 80001021 does not exist in the database or in the archive"
    please help  
    thanks
    amit

    Amit,
    This problem is due to a program error. Talk to your devloper in order to solve it.
    I copy & paste the below text or solution from OSS 993005. Check that for complete info.
    Reason and Prerequisites
    The problem is caused by a program error.
    Solution
    Implement the attached correction instructions.
    After you confirm error message VL 559 "Delivery &1 does not exist in the database or in the archive", the system branches to either
    the inbound delivery (DISPLAY) that was displayed or changed beforehand, or
    the inbound delivery that has just been saved (also in display mode).
    If no delivery was saved before you switched to 'Other inbound delivery', the original transaction is started again (for example: VL31N).
    Regards,
    Sats.

  • Delivery 100000093 does not exist in the database or in the archive

    Hi
    I have created delivery and the delivery number also given, but i am getting error like Delivery 100000093 does not exist in the database or in the archive
      the details are not in LIPS LIKP tables delivery numbers also not there.
    Please tell me where was the wrong?
    thanks

    Hi Sarveswara ,
    Please check assigned Number range to your Delivery Document whether complete range has been utilized.
    Cheers !!!
    Imzo
    PLEASE DONT CLOSE THE THREAD WITH FUNNY CHARACTER

  • How to check SSO user from database?

    Hi:
    I've posted this topic in Forms forum:
    How to check SSO user from database?
    then as I've been told, it's better to post it here, so ...... here is the question:
    I'm writing a "before delete trigger" to insert into log table before delete. Is there a way that I know from database the current SSO user when SSO users share one database user?
    Just like in Oracle Application Express there is v('APP_USER') to know the current user.
    Saad,

    End users are manipulating data through Oracle Forms(and SSO through portal) and the thing I need is to trace the SSO username from database without modifying forms, I mean purely from database taking into consideration that SSO users are sharing one database user. Is it possible?
    Saad,

  • Table /xyz/abc does not exist in the database

    Hi experienced developers,
    I created two transparent tables in customer name space in development system, transport to quality together with program using the tables, everything fine, no errors, no warnings.
    Then transported to production. No errors, no warnings. Detailed protocol shows tables have been activated, no errors or warnings.
    First try to use the program gives a dump.
    line 1191:
    ""/xyz/abc" is not defined in the ABAP Dictionary as a table, p"
    "rojection view, or database view."
    Double-click on the table in program code gives a popup information message
    Table/xyz/abc does not exist in the
    database
    After acknowleding the popup, the usual dictionary entry is shown, table is active. Utilities -> database object -> Display leads to an empty screen
    Fields of /xyz/abc  
    Fld name Position Data Type Length Decimals Not null Default
      Indexes for /xyz/abcI
    Utilities -> runtime object -> Display shows  the table name followed by message
    There is no active runtime object for ...
    prededed by big icon exclamation mark.
    We created a new transport with exactly the same result.
    Basis people have no idea.
    The only thing special (but OK I think) is that the tables have key fields only.
    Database is Oracle 11.2.0.2.0, SAP ECC 6.0
    SAP_ABA     701     0008     SAPKA70108     Cross-Application Component
    SAP_BASIS     701     0008     SAPKB70108     SAP Basis Component
    PI_BASIS     701     0008     SAPK-70108INPIBASIS     Basis Plug-In
    ST-PI     2008_1_700     0005     SAPKITLRD5     SAP Solution Tools Plug-In
    SAP_BS_FND     701     0009     SAPK-70109INSAPBSFND     SAP Business Suite Foundation
    SAP_BW     701     0008     SAPKW70108     SAP Business Warehouse
    SAP_AP     700     0022     SAPKNA7022     SAP Application Platform
    WEBCUIF     700     0009     SAPK-70009INWEBCUIF     SAP WEBCUIF 700
    Yes I know, this is a DDIC forum question but I hope for more (experienced) readers here.
    Thank you all for any hint leading to a solution.
    Best regards
    Clemens Li

    Hi,
    thank you for the comments although it does not help.
    Here is the excerpt from productive system  import protocol (original table names replaced as customer requirement)
    *** Activate objects at level 1
    Too low cost (2.100) for parallel processing. Minimum: 6.000
    * Synchronous execution, no parallel processing *
    Activate table /xyz/abcd1
    Table /xyz/abcd1 was activated successfully
    Activate table /xyz/abcd2
    Table /xyz/abcd2 was activated successfully
    Synchronous processing: 4 sec., 2 objects, 2.100 costs
          Object Activation
    End phase  001 ***********************************************************
    Start phase 002 **********************************************************
          Statistics on Activated and Deleted Objects
    Number of objects to be activated............:  2
    Objects not activated........................:  0
    Activated objects with errors in dependencies:  0
    Objects activated with warning...............:  0
    Successfully activated objects...............:  2
    Number of objects to be deleted..............:  0
    Objects not successfully deleted.............:  0
    Successfully deleted objects.................:  0
    Tables/views with DROP/CREATE................:  0
    No. of them marked for DROP/CREATE: 0
    Not marked for DROP/CREATE: 0
    Number of nametabs to be deleted.............:  0
    Successfully deleted nametabs................:  0
    Nametabs that were not successfully deleted..:  0
          Statistics on Activated and Deleted Objects
    End phase  002 ***********************************************************
    =========================================================================
    Mass Activation
    =========================================================================
    Process..................: ENNIPROD_10
    Return code..............: 0
    Phase 001..................: 00:00:04 (Object Activation)
    Phase 002..................: < 1 sec. (Statistics on Activated and ...)
    Program runtime..........: 00:00:05
    Date, time...............: 08.03.2012, 16:30:43
    Program end==============================================================
    ABAP Dictionary: Activation
    End date and time : 20120308163043
    Ended with return code:  ===> 0 <===
    Actually, I don' understand it.
    Regards,
    Clemens

  • Table ZCHECKPICK does not exist in the database

    Hi!
       I have a table "ZCHECKPICK" no "MANDT - Client".
       Then I inserted a field "MANDT - Client"  and executed SE14 to "Active and adjust database".
        The table is now "does not exist in the database" but the struture is ok.
      What do i do to get the table in DataBase again?
    <Priority normalized in subject line>
    Edited by: Vinod Kumar on Sep 13, 2011 9:32 AM

    Dear Clayton,
    you can try a few things
    1) generate/activate the table prior to call SE14.
    2) after confirming that the table is well generated, go to SE14 and choose "Delete Database Table"
    3) then, still on SE14, click on "Activate and Adjust database"
    [http://imageshack.us/photo/my-images/607/20110913010743.jpg/]
    That should fix it.
    Kind Regards
    /Ricardo Quintas

Maybe you are looking for