Checking for storage location when picking

Hi all,
I'm trying to put some code in the picking requirement to check whether user enters a storage location when they pick via program LV07A111.
the storage location is in table LIPS (item table), however, this table is not populated at all. Do you know why LIKP (header table) is populated, but not LIPS? If LIPS is not populated, do you know of another table where I can check for the storage location after picking?
Thanks for your help.

Thank you for your reply.
I tried XLIPS and this table is unknown in include LV07A111.
Is there another table? Again, I need to read the storage location in the item level when picking.
Thanks.

Similar Messages

Authorization Check for Storage Location

Hi Experts,
I have the following requirement :-
I have Plant : P081 created under Company Code : P110.
I have got various Storage Locations under this Plant for example
KT01 - Main Stores
KT24 - Remote Store.
The KT24 store is basically a remote location store. I have activated the Authorization for the Storage Location KT24 in the SPRO Settings
Material Management --> Inventory Management and Physical Inventory --> Authorization Management --> Authorization check for storage location.
I have maintain the following authorizations for the Object M_MSEG_LGO as follows :-
1. OBJECT : M_MSEG_LGO.
>> 2. USER ID : 081Store
>> 3. PLANT : P081
>> 4. STORAGE LOCATION : Kt24
>> 5. ACTIVITY : 01-03
>> 6. MOVEMENT : 101, 102, 201, 221, 261
and authorization for T_code MIGO_GR and MIGO_GI . I want to restrict the user for transaction only for this storage location but the system is allowing the user to post GR document for KT01 stores also.
Can any one suggest a solution or settings that need to be done for the user to be restricted to prepared GR for Storage Location KT24 only.
Thanks in advance.
AJ

Hi,
You set the authorizations to users with tcode PFCG. To know the reason of deny some access run tcode SU53 after SAP denies the access to some documents / objects.
Regards,
Eduardo

ATP Check issue for storage location level

Hi Experts:
   I met a problem when carry out the ATP check, when I create the SO for material A 1 pcs and not maintain the storage location in sales order, ATP carried out and gave me the proposal delivery date(100 days later) for about this material, the system can not check the storage location level.
   the real situation is for material A, in stock 1000 has 100 pcs, in stock 2000 has 50 pcs, and in stock 3000 has 30 pcs.
   How can the system automatic check the storage location level even I not fill in the storage location in the sales order?
Thanks and best regards
Jin

Jin,
For this check
1)Youe storage location shd be automatically determined..Make sure you've done all settings in 0vlk/0vlp..
2)In MMR-MRP2 make sure you have entered Prod Storage Location..Also in OVZ9 check what stocks you have selected for ATP for particular check rule..
3)Also in VA02 Go to Environment-Availability overview..
REWARD IF U FINDS THIS AS HELPFUL..
Regds
MM

PGI Error for Storage Location

Hi Team,
While Creating a dekivery i am facing a error of
The storage location is not defined for delivery item 000010
When i manually enter a Storage location in Picking again Second errors comes
"Material T831 is not defined for sales from Indienm.Sikkim"
When i click error agin i recive the Error called
:Material T831 does not exist in plant BP01"
I have check all the old Threads But still i am reciving this error
Kindly help me out
Regards
VP*

Hi SAP SD,
 Check the plant in which you have created the material.
Check the shipping point determinationu2014OVL2
Shipping condition of Customer+ loading group of Material + Plant+ Proposed Shipping point +Manual shipping point
Check the Storage location Determination-OVL3
Shipping point+ Plant+ Storage condition + Storage location
Check the plant for the shipping point & storage location it should be same
If everything is configured properly check in Delivery- Picking Tab the storage location will determine automatically.
Let me know if your problem is solved
Regards
Pradeep

MRP Relevance for Storage Location

All SAP Gurus,
In SPRO where we need to maintain MRP Relevance for Storage Location?
Regards,

Dear,
Check transaction OMIR - Storage location - MRP relevance.
In detail:
To control whether a particular storage location will be included or excluded from the MRP run. (MD02/MD41).
To exclude it from MRP run follow the steps:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.         1 - storage location stock excluded for MRP
To include it from MRP run:-
OMIR - Define storage location MRP per plant
Put the MRP ind. as.      space - storage location stock also planned at plant level and save it
Next go to transaction MM01 - tick only view MRP 2
Key in Plant and Storage Location
Look at the Storage Location MRP section
change the SLoc MRP indicator to space and save it
MMD1 - Create MRP Profile - MRP profile is a useful entry aid and makes it easier to manage MRP data.
You define which fields are filled with values when MRP data is entered in the material master record, which of these values can be overwritten and which not.   You use the information stored in a profile is standard information that is needed again and again in similar constellations when material master records are maintained.
Regards,
Syed Hussain.
Edited by: Syed Hussain on Sep 20, 2008 12:51 PM

Re: ATP check at storage location level.

Hi All,
NEED urgent help.
I want to know if it is posiible to have ATP check at storage location level only.
I do not want this check to happen at plant level.
Please reply.
Thanks and regards,
Nilesh

Hi Shankar,
Storage location is defaulted in sales order.
Can you tell me if there is any user exit for ATP wherein I can carry out the ATP at storage location level and not at plant level.
Thanks and regards,
Nilesh

Availablity check at storage location level in STO

Hi,
There is an unique requirement from my client with respect to the Availability check at storage location level in STO
Process:
Based on the inputs from APO we are creating STR for moving the material from one plant to another plant. These STR’s will be converted into STO through ME59N batch job. During STO creation process system will do the availability check and only if stock is available in the issuing plant then only STO will be generated.
During this availability check the stock will be considered at plant level and not at storage location level.
Requirement/Scenario:
Issuing plant contains two storage location ( location A & B).FG stock exists in both the locations.
Our requirement is system should create separate line items in the STO based on the availability of the stock in the respective storage locations.
Example
Total required qty: 1000 of material X
material X - Stock in Storage location A : 600
material X - Stock in Storage location B : 400
Two separate line item needs to be created in the STO
Sl no
Material
qty
Issuing storage location
1
X
600
A
2
X
400
B
Is there any function module available for doing Availability check at storage location level so that it can be called in ME59N with the enhancement.
Please suggest how to achieve this. If any enhancements needs to be done we will do it.
Thanks & regards,
Prashanth

Hi Nilesh,
in SAP standard the system is always checking on plant level first and then on the storage location level, there is no possibility to change this behaviour.
I'm also not sure if the process is correct, because if you have also requirements on plant level only then you would create negative ATP if you confirm on storage location level even though there is no ATP on plant level.
I'm also not aware of a user-exit that would suite your requirement, additionally according to the IMG documentation the user-exits in the availability check area should only be carried out in agreement with SAP.
Regards,
Markus

System asking for storage location in case of Asset GR,

dear all,
In our case system is asking for Storage Location in case of Asset GR, though PO was account assigned.
I checked for the screen setting, but not getting any clue where to find that entry to make depressed.
Pls guide,
Regards.

Hi,
Are u using material code for assets or its a text based purchase, if material code is there (although non valuated / qty managed) it will still require sloc as system needs to store the qty in stock
Reg
dheeraj

Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

Under the stock transfer order configuration, there is a IMG step "Define Shipping Data for Storage Location".
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
But I am not able to figure out what's the use of VENDOR number we are specifying in this step.
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
Also I need to know what vendor account group I will use for creating this storage location vendor. I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.
Thanks

Hi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L

HU Configuration for Storage Location

Hi everyone.
In the following point of config, there is something I do not understand.
I hope somebody can explain it to me.
HU Requirement for Storage Locations and Default Values for Deliveries
Are the Vendor and Customer needed in this table?
If they are, what purpose do they serve? What are they needed for?
And again, if they are, do they represent the Plant? or what?
Should they be created with special characteristics?
I know a lot of questions, But I do not understand.....
Thanks,
Alain

Hello Alain,
When you are making the storage location is HU managed, and when you try to execute any IM transactions like stock transfer, transfer posting, system doesn't directly post a material document unlike in regular non HU managed locations.
For example if you try to execute MB1B-311 from HU managed location to non HU location, system tries to create an outbound delivery document. And to create this outbound delivery document you need a customer and this is the place where system gets that customer information. Same is the case for vendor in inbound delivery.
And it doesn't require to create deliveries all the time if you want to execute these inventory transactions. VLMOVE transaction can be used to posting material document without deliveries.. But not all business scenarios will use VLMOVE as it has its own limitations.
Regards
Gopal

Negative stock for storage location M7 021

Hello
I use negative stock for some materials
When I want to post document in MIGO - 551 scrapping, I have error message M7 021: Deficit of BA Unrestricted-use 1.100 EA: 24000641 XXXX 9999 YYYYYYY
This is ERROR. When I change storage location from 9999 to 0002 message have status WARNING.
I set - allowed negative stock in material master data MM02 and for plant in WB02
Where should I set "allowed negative stock" for storage location, because I need warning for location 0002?
Could You help me?
Thank You in advance
Arek

Go to SPRO>MM>IM>Goods Issue/Transfer posting>Allow negitive stock allowed for plant and then chose the plant and then go for the storage location --> mark the same.
If use ful award points

Problem in Address update for storage location via LSMW

I am trying to update the address of storage location thru LSMW,
Normally when i run OX09 i get the "dialogue structure' in LHS panel but when I do the recording of OX09 in LSMW, I am not getting the "Dialogue structure" LHS panel & hence I can't go to the 'Addressees for storage location'
How to get the ""Dialogue structure" in LHS while recording in LSMW so that I can update the address also.
Currently my recording only takes me to the create storage location & no LHS 'dialogue structure' for 'Addressees for storage location'
Please give the suggestions as I its on urgent for me to update 1000 storage location.

Dearrrrrrr Prasoooon,
U got it Right Again!!!!!
Thank you so much.
I resolved with above Note & now i can happily go on leave from tomorrow.
Salute to you!!!!!!!!

Table for Storage location name..

Hi frnds,
I have a storage location number.. Now how do i find the name or Description for that?
How to find the table? ,, If anybody knows the table name plz let me know..
Thank you.
Sree.

Hi,
CHeck Table MARD for storage Location
Regards,
Prashant

Classification System for Storage location

Hello,
I would like to know if you can apply the classification system (as we know it well from the material master), to classify the storage location configuration. I need this for a client who wants to analyze his information system with the possibility to drilldown the characterics of his storage locations. But to do this, he first would have to apply the classification system to these storage locations, but I can not figure out if it is possible, and where to customize it.
Thank you in advance for your help,
Dominik Ley
DTI Consultores
Chile

yk,
perhaps it is even some kind of weird, but for 2 reasons I dared to make the question:
- Classification system is a cross-application component (Material Management, Project System, etc.), so why not for something like storage location.
- For Plants you DO HAVE this classification. Go to CL02 and have a look on matchcode of 'Class type' field. So, my idea was to check if there was something similar for storage location.
If you do have any other idea, or anyone else, I appreciate a lot your help.
Regards,
Dominik Ley

Table for storage location addresses

Hi
I am trying to find the table where addresses for storage locations are found. I have found the storage locations in T001L and the addresses in ADRC, but cannot find the link between these tables.
In which table can I find the link between storage locations and addresses?
Any help is greatly appreciated.
Regards

Hi,
check TWLAD table.
Regards,
Chandra

Checking for storage location when picking

Similar Messages

Maybe you are looking for