Checking Info Cube request data

Hi gurus,
Let's say I have I needed to look what data the DTP request brought up to the Cube.
How would/through what navigation steps I shoud see for analysis data in one particular request.
Thanks for your comments.
Eddy.

Try this ....
right click on your cube and select manage .....
under request tab copy the required request number ...
select display data from the context menu of the cube and enter the request number (under data package dimension) and execute .

Similar Messages

Deletion of Info cube request

Hi Experts,
Currently I am working on BI 7.0.
Here is the scenario, Actually I want a such setting so I can delete the previous Info Cube request while scheduling info package for new request.
Actually in 3.0 we had this functionality in Info package "Automatica loading of similar/ Identical request from the Info cube" where we can select the radio button to delete the previous request from Info Cube.
Do we this type of functiobality in BI 7.0?
Regards
Sujay

Hi Sujay,
Netweaver 7.0 does not support the feature you are talking about, it is possible only in 3.x.
You could however incorporate this step 'Delete Overlapping Request' using a process chain. Thats what I do, I too had an issue on this earlier.
Regards,
Manu

Delta update for Info cube, How it will be works, what are mode to select.

Hi all,
              How delta update works for info cube, Generic data source delta update options are
              1) time stamp
              2) Calday
              3) Nemeric pointer
Please explain briefly delta update for infocube and delta init and delta update.
Thanks,
Gowda

Hi,
How delta update works for info cube
When you are updateing the data to cube from ods then data would extracted from change log their delta pointer get setup in the source request (in Source you can check the option beside the reqest says updated to target object.... it means the records are updated to target hence we would not update the same request )
Incase of PSA to cube Also in the PSA request get stamped as last updated .
Regarding Generic Datasource
When we don't find any standard extractor then we can go for Generic(if i want information sales along with finance information in a data source then generally we dont get standard one hence we can go for generic DS)
Check the below link for More about generic DS .
http://wiki.sdn.sap.com/wiki/display/BI/Generic+Extraction
for Delta capturing you can use
Timestamp(if the table has time stamp filed so it can stamp the last changed record in that table hence it is easy to get delta based on the time stamp)Calday- (If the table doesn't have the Timestamp filed then search for Calday where you can stamp the delta based on the date when documents are changed )
Numericpointer : If the table doesn't above both then we go for this option where you can the numeric value change stamp )
Re: Extraction, Flat File, Generic Data Source, Delta Initialization
Regards,
Satya

How to populate values in DP key figure which is not present in Info Cube

Hi
We have a special Key figure in Demand Planning created for uplaoding Forecasts coming directly from customer,
This key figure is not present in Info Cube and data doesnot pupulate in this key figure through Info cube build,
Hence data in this key figure is to be loaded externally , Customer sends his forecasts through EDI messages, Now we want to update forecast from external customer in to this special key figure,
Please suggest some ways
Thanks and regards,
Nitin Lavhe

Hi
I think you can get loaded this information in the cube in any other key figure which is available in the info cube. Then while loading the data into planning area using TSCUBE, you can define the key figure assignment.
In which you define data from which key figure of infocube has to be get loaded into which key figure of planning area. Here you can define the respective key figures.
Please let us know if it helps you. Please let us know if you require any more information from our side.
Thanks
Amol

Request yellow when no data for one Info cube.

Hi all,
We have been doing delta load from 0FiAR_o06 to cube 0FIAR_C02 , but since a couple of days we have been getting request status yellow in the info cube when no data .. I have checke the settings in infopackage , it is the same for other info cubes in which the request gets green automatically when no data . This problem exists for this cube only.
I have done RSRV and fact table recreate also but no luck so far ..
Please help as it is pruduction issue..
Regards,
Akash..

Hi
Only the Requests that doesnot have data is updated with Yellow Request right, means the whenever the yellow request it could not pull the data.
You need to recheck the Table Space / Back Ground memory / and Short dump.
Try to analyse the Yellow request at Job Process / SM37
Try to raise a Ticket with BASIS Guys for system refresh.
Hope it helps and clear

Checking data in an info cube

I am trying to carry out a check on the contents of an info cube, in which I need to filter on a characteristic and a key figure. Can someone advise? Thanks

Thanks guys.
I tried a different approach by going to the Dimension table and than checking for the DIM ID entries where my FIELD_SID has the value that I want.
The idea was then to take this subset of data and filter on these entries in the Fact table and restrict the key figure value that I wanted.
Problem being the list of DIM IDs was not practical to work with.
Have awarded points

Flat File: no data load into Info Cube

Hi there,
i try to load a flat file. When I simulate the upload its works well. But no Data was load in my Info Cube. When I try define a query there are no available.
Can someone provide me with a solution for this problem?
With rgds
Oktay Demir

Hi Oktay,
in addition to A.H.P.'s marks, check if
- Data is posted not only into PSA but also into datatarget,
- updaterules are active.
- Check Monitor-Status in Cube-Administration
- Check availabilitiy for reporting of the request wthin Cube-Administration.
Cheers
Sven

Error 3, when loading transaction data into an info cube from flat file

HI friends,
I have taken 2 dimension info cube. (customer and product dimensions).I loaded master data through direct update by preparing 2 excel sheets seperately for customer and product. For loading transaction data(through flexible update), I prepared single excel sheet covering all values that is master data info objects of customer and product, key figure values and taken 0unit, 0currency,0calday in transfer rules.(in excel sheet)
Once I load the data, the "data was requested" option is appearing and error 3 coming, when I go for monitor to check the data.
sai

Hi Ram,
In Monitor see the error message by clicking on Error message button or
go to details tab and expand the nodes to see which record is having problem.
Regards,
Prakash

Info cube key figure quantity is more than the data source

Hi,
I am loading data from a custom table data source into an info cube. The data records and key figure quantity of the info cube is more than the data source custom table.
I checked the extraction in RSA3. The number of records records and key figure quantity are exactly extracted from the data source in RSA3 transaction.
But after loading using the info package, the number of records and the key figure quantity of the info cube is more than the actual records available in the data source. The update rule is simple 1 to 1 mapping.
Kindly help to troubleshoot this issue.
thanks and regards
Murugesan

Hi,
There could be some other data already avilable in the Infocube. Pls take the Request ID or Number from the last run of the Infopackage you used and check the records only for that Request ID in Infocube.
You can check the data in the LISTCUBE Transaction.
Please let me know of you need additional information.
Thanks,
Jeysraj

Info cube data doesn't match with R3

Hi,
We are using "0AFMM_C02" Info cube for Inventory data.
for some records its not fatching data for distribution channel.
I checked the update routine for Distribution Channel.
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: BEGIN OF it_data OCCURS 0,
     material LIKE /bic/cs2af_mm_inv_1-material,
     plant LIKE /bic/cs2af_mm_inv_1-plant,
     val_type LIKE /bic/cs2af_mm_inv_1-val_type,
     END OF it_data.
DATA: lt_mrpods TYPE TABLE OF /bic/ascm_d0500.
INCLUDE rs_bct_retail_update_rules.
$$ end of global - insert your declaration only before this line   -
FORM compute_key_field
TABLES   MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING    COMM_STRUCTURE LIKE /BIC/CS2AF_MM_INV_1
           RECORD_NO LIKE SY-TABIX
           RECORD_ALL LIKE SY-TABIX
           SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BI0/V0AFMM_C02T-DISTR_CHAN
           RETURNCODE LIKE SY-SUBRC
           ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line        -
fill the internal table "MONITOR", to make monitor entries
data:DISTR_CHAN LIKE /BI0/MCUST_SALES-DISTR_CHAN.
SELECT SINGLE DISTR_CHAN INTO DISTR_CHAN FROM /BI0/MCUST_SALES
    WHERE CUST_SALES = COMM_STRUCTURE-CUST_SALES.
    IF SY-SUBRC EQ 0.
      RESULT = DISTR_CHAN.
    ELSE.
      RESULT = COMM_STRUCTURE-DISTR_CHAN.
    ENDIF.
result value of the routine
RESULT = .
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line         -
ENDFORM.
Can any body tell for what distribution channel it will get data..
Please help .. its very urgent..
Regards,
Viren.

Hi,
I have a better suggestion..Try to write this code in Start Routine of Update Rule.
DATA: S_DATA TYPE STANDARD TABLE OF DATA_PACKAGE_STRUCTURE
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
DATA: ITEM_TABLE TYPE STANDARD TABLE OF /BI0/MCUST_SALES
       WITH HEADER LINE
       WITH NON-UNIQUE DEFAULT KEY INITIAL SIZE 0.
*start of modification
*Populating the item status data from the item status ODS table
SELECT * FROM /BI0/MCUST_SALES INTO TABLE ITEM_TABLE.
LOOP AT DATA_PACKAGE INTO S_DATA.
   LOOP AT ITEM_TABLE WHERE CUST_SALES = S_DATA-CUST_SALES.
     MOVE item_table-DISTR_CHAN to s_data-DISTR_CHAN.
     APPEND S_DATA.
   ENDLOOP.
ENDLOOP.
DATA_PACKAGE[] = S_DATA[].
Hope this works...
Regards,
San!

Deleting the latest request from info cube.

Hi All,
In our project, we have data from May 2012 to till date. Data is freezed and there is no change of data till May 2014. And there is change in data for current month only ie) June 2014. So i have pulled the full load from May 2012 to May 2014 and loaded in the Info cube.
I am deleting the current month data and loading only the current month data to Info Cube. So i want to delete the current request in the info cube before loading and load only the current month data.
Can you pls guide me how to achieve this through Process chain. I am unable to identify which process type will suit my requirement.
Thanks.

Hello Vincent,
As mentioned by you, that there is no change in data from May 2012 to May 2014, you can keep the request which contains this data(for Example Req1). If Request2 contains data from May 2012 to June 2014 then you need to delete this request i.e Req2 and load only data for June 2014. Later you can follow below mentioned process.
Now coming to option which you are looking for process type to achieve this via process chain, there is a process variant called "Delete Overlapping Request", which is used to delete data from the target based on certain condition depending requirement.
Hope this resolves your issue. Below document explains steps to achieve the same.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0431c48-5ba4-2c10-eab6-fc91a5fc2719?quicklink=index&…
Best Regards,
Venu Gopal K

Unable to see the request in Reconstruction Tab of Info Cube

Hi Experts,
We are scm 5.1 version.
Actually I have created extraction process to extract data from Demand Planning area. I have extracted data from planning area also. I can see the request in to PSA as well as Info Cube but I am not able to see the request in reconstruction tab.
Is there any setting to see the request in to Reconstruction tab of the info cube?
Please advise..
Regards
Sujay

Hi rathy,
Is there any way to support the equivalent of reconstructions with the new BW 7.0 design?
I will explian in detail..
Reconstruction is critical functionality for our current DP solutions, it allows us to "reconstruct" old requests from the backup InfoCube (based on what's been kept in the PSA) and use this to restore data in the planning area to a day in the past. It is used whenever there is a technical or user error than needs to be un-done. I believe there is a way to accomplish with the BW 7.0 design.
Please suggest...
Thanks in advance..
Regards
Sujay

The data back up to info cube

hi.. sir
i have created PA, also created a Time series for the PA. and then created PB, DV.
Now i want to add a KF to the PA. How??
if i deactivate the planning area i will loose the time series data.
then how i can back up the time series data to infocube. What is the path and procedure to back up the time series data to INfo cube??

HI,
If you are on SCM5.1 or above i guess it is not requried to de-intiaze the planning area.
IF it is SCM 4.1 or below, we need to de-initilise the planning area as you expected.
Assuming you are in 4.1 or lower version,
As i understand from your words, you have created a plannign area newly, so, there will be no Data source generated on it.
To take the backup, we need to have a backup cube and the data source generated for the planning area.
With out taking help of BW team you can do this yourself from Planning area,
Goto MSDP_ADMIN and from the menu goto Extras and choose Generate Datasource to generate DS and use the other option Data extraction tools to create a cube. please refer the SAP HELP for more detail steps.
Once the infocube is ready for backup,
1. Take the backup and do the basic validation agianst planning area data.
2. De-Inialise the planning area and add the keyfigure to planning area
3. Create the timeseris agian and do the consistency check
4. Load back the data to planning area using /SAPAPO/TSCUBE
Hope the information will helps you
Yarala

Error in Uploading the data in Info Cube

Hi,
We are implementing SCM 5.0 APO and ECC 6.0 in UK/I client.
At the moment we are facing one problem in uploading the Excel file into Info Cube.which was working perfectly earlier.
Through analysis, we come to know that data flows thru PSA. but when we try to push that data from PSA manually system gives following error message;
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_RSR_X_MESSAGE
What happened?                                                                                |
|    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere along the call hierarchy.
Since exceptions represent error situations and this error was not
adquately responded to, the running ABAP program 'SAPLRRMS' has to be    terminated.
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_RSR_X_MESSAGE', was not caught and therefore caused a runtime error.
The reason for the exception is:
No text available for this exception
Missing Handling of Application Exception                                                        Program                              RSABW_START_NEW
Trigger Location of Exception                                                                     Program                                 SAPLRRMS
Include                                 LRRMSU13                                              Row                                     78
Module type                             (FUNCTION)                                            Module Name                             RRMS_X_MESSAGE
if somebody can give advice on this! As we could upload the data earlier perfectly.
Thanks
Regards
Jignesh.

Hi Jignesh,
                  I this the first time you are loading into the cube? Is it the a fresh installation?
The error message doesn't help you much but I would try a couple of things
1. Replicate the datasources in source system, Activate the transfer and update rules and then try to load
2. Try loading only till the PSA and then try to simulate the update to cube. If you are using BI 7.0, then just load the info package, it will load to PSA and unless you run the DTP, it doesnot update the cube.
3. This can also be a GUI issue. Make sure that you have all the GUI files installed. Is it a dump with message "CX_RSR_X_MESSAGE"?
Check the Note 763203 - Termination during InfoCube realignment
Hope this helps. Please donot hesitate to ask more questions.

I need format for data in excel file load into info cube to planning area.

Hi gurus,
I need format for data in excel file load into info cube to planning area.
can you send me what should i maintain header
i have knowledge on like
plant,location,customer,product,history qty,calander
100,delhi,suresh,nokia,250,2011211
if it is right or wrong can u explain and send me about excel file format.
babu

Hi Babu,
The file format should be same as you want to upload. The sequence of File format should be same communication structure.
Like,
Initial columns with Characteristics (ex: plant,location,customer,product)
date column (check for data format) (ex: calander)
Last columsn with Key figures (history qty)
Hope this helps.
Regards,
Nawanit

Checking Info Cube request data

Similar Messages

Maybe you are looking for