Checking Memory through GRID

Hello,
I set my 11g database to Manual Memory Management. Apart from other memory cache parameters, I also set DB_KEEP_CACHE_SIZE to 4G and STRAMS_POOL_SIZE to 6G.
But when I see through the GRID, I can not see any details for the DB_KEEP_CACHE_SIZE.
Advisor Central -> Memory Advisors
Shared Pool     8GB 
Buffer Cache     20GB 
Large Pool     256MB
Java Pool     256MB
Other (MB)      6223
Total SGA (MB)      35407 I can see under the "Other (MB)" which is around 6GB which I guess is due to STREAMS_POOL_SIZE. But where is the entry for DB_KEEP_CACHE_SIZE?
Thanks!

At the home screen, tap the menu icon/tap the time
select Info
voila!
webosnation.com is another option for help.

Similar Messages

  • Installing Oracle Agent through Grid Control!

    Hi,
    Can we install oracle agent on Solaris through Grid control which is located on Linux?
    Thanks
    Azam

    before you can use the agents (the deployment will succeed) you need to apply 2 patches on OMS home.
    Check metalink note: How to Deploy the Latest Database Plugin to the OMS and the Agent in 12C Cloud Control [ID 1388143.1]
    it explains how you can apply the prerequisite patches and deploy the agents for Solaris and AIX (the current available agents).
    Daniel.

  • NMI: Parity Check / Memory Parity Errors on Lenovo T500 2082-58M running Windows XP.

    NMI: Parity Check / Memory Parity Errors are occurring on
    five out of five Lenovo T500 laptops 2082-58M tested.
    I can get the error to re-occur consistently by installing
    IBM Director Client version 5.20 or 5.23, taking remote control and then within
    the remote session I initiate a PC restart. This re-produces these errors
    without fail.
    I've also received this same error without Director but am
    unable to cause this to re-occur consistently.
    My Findings:
    Changing the BIOS Settings from the default settings of :
    BIOS Config > Display
    Default Primary Video Device:[Internal]
    Boot Display Device:[ThinPad LCD]
    Graphics Device:[Discrete Graphics]
    OS Detection for Switchable Graphics:[Enabled]
    To the following settings resolves the issue though this
    causes the installed and previously working ATI driver not to detect the video
    device.
    BIOS Config > Display
    Default Primary Video Device:[Internal]
    Boot Display Device:[ThinPad LCD]
    Graphics Device:[Integrated Graphics]
    OS Detection for Switchable Graphics:[Disabled]
    What I have tried:
    o Updated the BIOS and Drivers to Latest available
    o Re-Installed the Display Driver, Downgraded the
    Display Driver
    o Removed the Display Driver and left BIOS
    settings enabled (NMI errors re-occur)
    To get to the above findings I tried removing /
    re-installing pretty much every driver and disabling every option within the
    BIOS. I am only listing what I believe is now relevant to the identified
    problem. I can provide further information upon request.
     Anyone able to help ?

    Hello,
    the switchable gfx doesn´t work in XP. In XP you have to choose gfx options in bios before booting os.
    Please try: 
    Default Primary Video Device:[Internal]
    Boot Display Device:[ThinPad LCD]
    Graphics Device:[discrete Graphics]
    OS Detection for Switchable Graphics:[Disabled] 
    Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
    Please insert your type, model (not S/N) number and used OS in your posts.
    I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
    TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
     English Community       Deutsche Community       Comunidad en Español

  • Error while check printing through f-58

    Error while check printing through f-58 is showing following  for company code xxxx
    1. Fiscal year variant z4 not defined or maintained for date 01/06/08 .
    (Fiscal year variant Z4 not defined or maintained for date 01/09/2009
    Message no. GMMASTERDATA108)
    2.the payment made is not recorded in the SAP system.
    when you see the print preview of check then in plase of amount and invoice date its showing as
    Kindly refer tthe payment advice for the invoce details.
    Is there any solution to this?
    Regards,
    Yojana.

    Hi,
    i have check periods are open till 2010.
    and parameters for fiscal year variant are also correct.
    In FBZP i have check configuration there is no prob in it.
    any solution on this?
    Regards,
    Yojana.

  • How to delete archive log files from ASM through Grid Control

    Hi
    Anybody suggest me how to delete archive log files from ASM through Grid Control.
    Thanks

    It is important to specify both, the oracle version and os version when posting, so confusions can be avoided.
    In this particular case, since you are referring to asm and grid control you could be talking about either 10gR1, 10gR2 or 11gR1; but I strongly suggest you to avoid us to be guessing. In either case, you sould go to the maintenance tab of the target database and program a scheduled 'delete noprompt obsolete;' procedure. This will purge the information stored at the Flash recovery area, which I assume you have declared inside the ASM.
    ~ Madrid
    http://hrivera99.blogspot.com/

  • Automatic Check updation through Payment

    Dear Friends,
    How to do Automatic check updation through payment please give the process steps and Tcode
    with regards
    Raghavendra.

    Hi,
    Create Check lot in FCHI
    Then make the Payment through F-58.
    In Initial screen given company code, Payment Method,house bank, account id check lot then press payment.
    Automatically the check number will be allotted from check lot sequentially.
    Do not forget to manually fill the assignment field with check number for BRS
    Edited by: lolu jo on Oct 28, 2011 3:53 PM

  • Find Check number through GL account

    I need to find the check number through running the GL.
    i have tried to set the check number field in FBL3n but it doesnt work.Any expert have an idea to get the information, i need it once only if we can extract the data from tables then it will be great or comparing two or more table and extracting the data would be a great help!
    I have tired running the fbl3n report on GL and ran fbl1n on for all vendors, compared it through excel but it doesnt help because document whose MIRO was done doesnt contain check number on fbl1n.
    any help??

    Hi,
    here 2 options are their ,
    1. Use FBL1N - select dynamic selection - Reconciliation acct  -- give GL account number - and Give vendor number from-  to  and give Company code - select all cleared items - execute
    then select change layout - select check number field - then you can able to view check numbers .
    2. Use FCHN -  give company code , house bank , account ID - date from - to and execute -
    then go to change layout - and add vendor number - G/L Account Number for Our Bank Acct -
    then you can able to view - vendor and Bank GL account
    Thanking you
    Mahesh

  • Use Performance Tool to check memory problem

    Hi, I am new to mac programming.
    How can I use the performance to check memory problem such as "uninitialized memory read", "memory access out of array boundary" etc?
    Thanks,
    fm

    Don't know about source code analyzer, but dbx, the Sun Studio debugger, is capable of detecting memory leaks at run time. You can use bcheck script on your application or start dbx, issue "check -leaks" and then run your app under dbx.

  • Monitor Linux Services through grid control 10g

    Hi Experts,
    Is there a way to monitor a linux service like samba/nfs/cups through grid control 10g. I mean if it could monitor status of these services and send a down alert if they re not running. I have large farm of linux servers being monitored by grid and most of them run these services so i was looking towards monitoring them through grid.
    Let me know any ideas to accomplish this.
    Thanks in advance.
    Rohan

    Hi Rob,
    Thanks for the reply. I am new to GC. I cant find a setting while creating new metrics in grid to monitor a Linux service. Can you tell steps in brief to do this, or else is there any guide i can follow to create a plugin for grid control to discover a new type of target.
    Thanks,
    Rohan

  • X-FI worked great for one day, now system won't boot up - NMI: Parity Check / Memory Parity Er

    I can get the system to come up in safe mode, but can't get it to come up normally. I installed the card on Saturday and it worked great with no issues (played about 4 hours of WoW with it). The machine booted up fine at least 3 times yesterday. This morning, it won't come up normally at all: BSoD:
    NMI: Parity Check / Memory Parity Error - The System has Halted
    I made a restore point prior to installing the X-FI drivers yesterday, so I am going to go ahead and go back to that point and hope the system comes up. If it does, then there is a serious problem with the X-FI drivers.
    My system is a standard Intel chipset running a Pentium 4, 3.8 Ghz - single core, non-64 bit with 2 Gigs of Ram.
    I will post back on here if I have any luck with the restore point.

    Memory chips are pretty vulnerable these days. The first week I had my PC I tested my memory with memtest and all was fine. A week later, I began getting BSODs, but every time because of a different driver or module. So I retested it and it wasn't OK anymore. Send it back, got a new one. Worked for a month, then same problems! The 3rd time was the good one... The memory lasted, but my Power Supply broke! After replacing everything is fine for a year now... I don't know if there is any connection, but I think my PSU was eating my memory sticks.
    But anyway, I hope your BSOD is just a "statistical" one.

  • Create ticket through grid.

    Hi Expert,
    Is there any way to create ticket through grid control?
    We have set alert through grid. we get an alert message through grid.
    we need to implement the same alert should be converted into remedy.
    Can you guys help me on this?
    Thanks,

    Hi ,
    When i try to register ticket templates i got a following error.
    *[oracle@shbaorc09b bin]$ ./emctl register_ticket_template connector /u01/app/oracle/product/10.2.0/oms10g/sysman/connector/Remedy_Connector/templates/Remedy_DefaultCategory_LowPriority.xsl shbaorc09b 1159 GRIDBA1 sysman gridba1sysmanshire "Remedy Connector" "Remedy Connector" template1 template1*
    Oracle Enterprise Manager 10g Release 4 Grid Control
    Copyright (c) 1996, 2007 Oracle Corporation.  All rights reserved.
    log4j:ERROR No appenders could be found for category (oracle.sysman.connector.registry.api.ConnectorControl).
    log4j:ERROR Please initialize the log4j system properly.
    I can see the all the ticket template in /u01/app/oracle/product/10.2.0/oms10g/sysman/connector/Remedy_Connector/templates
    I guess all the templated are already register thats why i can see all the ticket template.
    please find the information below.
    [*oracle@shbaorc09b templates]$ pwd*
    */u01/app/oracle/product/10.2.0/oms10g/sysman/connector/Remedy_Connector/templates*
    *[oracle@shbaorc09b templates]$ ls*
    total 128K
    -rw-r----- 1 oracle oinstall 7.9K Apr 28  2009 Remedy_DefaultCategory_HighPriority_AutoClose_w_Wlog.xsl
    -rw-r----- 1 oracle oinstall 6.4K Apr 28  2009 Remedy_DefaultCategory_HighPriority_AutoClose.xsl
    -rw-r----- 1 oracle oinstall 7.4K Apr 28  2009 Remedy_DefaultCategory_HighPriority_w_Wlog.xsl
    -rw-r----- 1 oracle oinstall 5.9K Apr 28  2009 Remedy_DefaultCategory_HighPriority.xsl
    -rw-r----- 1 oracle oinstall 8.0K Apr 28  2009 Remedy_DefaultCategory_LowPriority_AutoClose_w_Wlog.xsl
    -rw-r----- 1 oracle oinstall 6.4K Apr 28  2009 Remedy_DefaultCategory_LowPriority_AutoClose.xsl
    -rw-r----- 1 oracle oinstall 7.4K Apr 28  2009 Remedy_DefaultCategory_LowPriority_w_Wlog.xsl
    -rw-r----- 1 oracle oinstall 5.8K Apr 28  2009 Remedy_DefaultCategory_LowPriority.xsl
    -rw-r----- 1 oracle oinstall 8.0K Apr 28  2009 Remedy_DefaultCategory_MediumPriority_AutoClose_w_Wlog.xsl
    -rw-r----- 1 oracle oinstall 6.4K Apr 28  2009 Remedy_DefaultCategory_MediumPriority_AutoClose.xsl
    -rw-r----- 1 oracle oinstall 7.4K Apr 28  2009 Remedy_DefaultCategory_MediumPriority_w_Wlog.xsl
    -rw-r----- 1 oracle oinstall 5.8K Apr 28  2009 Remedy_DefaultCategory_MediumPriority.xsl
    -rw-r----- 1 oracle oinstall 8.0K Apr 28  2009 Remedy_DefaultCategory_UrgentPriority_AutoClose_w_Wlog.xsl
    -rw-r----- 1 oracle oinstall 6.4K Apr 28  2009 Remedy_DefaultCategory_UrgentPriority_AutoClose.xsl
    -rw-r----- 1 oracle oinstall 7.4K Apr 28  2009 Remedy_DefaultCategory_UrgentPriority_w_Wlog.xsl
    -rw-r----- 1 oracle oinstall 5.8K Apr 28  2009 Remedy_DefaultCategory_UrgentPriority.xsl[oracle@shbaorc09b templates]$
    If i am able to see the ticket template in above path.
    Is that means that all the ticket template or still i need to register it.
    Help is much appreciated.
    Thanks,

  • S10 Parity Check / Memory Parity Error

    I'm getting frequent "Hardware Malfunction" blue-screen errors on my S10. The specific message is "NMI: Parity Check / Memory Parity Error".
    This started after I added a 3rd hard drive (an 80GB SSD) which worked fine for a month or so but inadvertently caused the power plug on my 2nd hard drive to partially dislodge. I believe that is when I saw the first blue-screen. After resolving that (and the tech did do a fully memory check) I had frequent blue screens until I decided to remove the SSD completely. After a few months of trouble free operation the blue-screens have reappeared and are now appearing several times per day.
    Typically what happens is that the computer will freeze for short periods (a few seconds) and then continue working but eventually the frequecy of this will increase and finally the blue screen which can occur while the computer is idle or when I'm actually using it.
    There is very little info on the web on how to deal with this issue. I suspect that it may be one of the hard drives that is failing. I would appreciate any suggestions.
    Thanks,
    Greg

    i had that happen once on a colleague's thinkcentre after an internal device came loose, shorted +12V to ground, and tripped the PSU's breaker.   the only solution i found was resetting the BIOS and reinstalling windows.
    perhaps someone else will have another solution.
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • How do you check Memory Speed on ICD

    Hi everyone
    I am new to the forums and I am also a soon to be first time mac owner(Receiving my 20" ICD this week) .
    I am buying the imac with an extra 1gig DIMM installed, non-apple memory.
    Now the reseller assures me that the 3rd party memory that he'll be using is compatible with the imac.
    I'm assuming that if there are no issues at start-up then the memory is compatible, but I would like to know how can I check that the memory is running at 667 mhz and that he did not install 533 mhz memory.
    So how can I check that the memory is running at 667?
    Thank you in advance
    20" Imac ICD     1.5ghz memory

    Ah, I think I'm reading that you may be concerned about a potentially counterfeit SO-DIMM. That's one reason to buy direct from a reliable seller such as Apple or Crucial. I'm not sure the memory utility Memtest will verify the DIMM's speed, but it will verify whether or not the SO-DIMM is working properly. That might include a speed calculation, and possibly you can email the Memtest author to find out.

  • Void multiple PY checks not through off cycle work bench

    Hello,
    We had a scenario where we had to void nearly 60 regular PY checks in our previous period. The postings to FI did not happen yet. We went to off cycle work bench and voided 60 checks one after the other.
    Is there any quicker way to void multiple PY checks (If we know the check number to void). What if we run into a scenario where we need to void few hundreds.
    Any advice is greatly appreciated.

    Hi Priya,
    I feel you have got answer of this query.... as it was processed through another thread. I will request you to close this thread as for a question 2 threads are there. And if moderator will see it then they may block the thread.
    - Praveen

  • Limitation of BitmapData loaded into memory through Loader.load()

    I am creating a photo gallery using Loader.load() to load
    pictures into Flash Player 9. I plan to make them preloaded in
    advance so when the users turn the page they can see the pic on the
    new page right away without waiting. So the pics are loaded one
    after another automatically on backend. When users request a new
    page, the bitmap object are simply added onto the page’s
    display list.
    I publish the code and test on IE 6 and Firefox 1.5. Only
    about 50 pics can be preloaded on FF and about 70 pics on IE. I
    read some articles talking about memory problem of Loader in Flash
    8.5 alpha. So is it still a problem for "Flash 9 Actionscript 3
    Preview Alpha" ? Check the article -
    http://www.jessewarden.com/archives/..._battlefi.html
    Please see attached my code for preloading job. No error is
    thrown.
    Please advise. Thank you very much

    Hi,
    if it's a IA report the limit of columns you can show at the same time is 100,
    check http://docs.oracle.com/cd/E17556_01/doc/user.40/e15517/limits.htm for more limnitations.
    Regards
    Bas

Maybe you are looking for