Checking out graphics
I am using Arbortext's Epic Editor to access the Oracle database through the IFS adapter. I cannot check out graphics though through this adapter because the box is grayed out. Does anyone know why this is or if there is a configuration parameter I need to change? Thanks.
Nicholas-
Thanks for the quick reply. Basically I have a graphic (JPG) I imported into FCS and the metadata is all there. I add notes to the keyword field in FCS, However when I check out the graphic and edit it in Photoshop CS4 the added notes aren't in the keywords field in file info (only the original keywords). I add a new note in Photoshop and re-checkin to FCS and the notes added in PS are there.
I'd like to be able to have the metadata be exchanged both ways. Note if I export the JPG the info is retained but that's a lot of work importing and overwriting of files.
-H
Similar Messages
-
Checking out graphics and retaining metadata
I'm testing FCS and I'm wondering... Maybe I'm missing something.
Is it possible to add metadata to an image in FinalCut Server,check out the image and retain the metadata in CS3 Photoshop? I can export and retain keywords, and add keywords in Photoshop and bring them back in. Just can seem to see the metadata unless it's exported as a PhotoShop or jpg file.
-HNicholas-
Thanks for the quick reply. Basically I have a graphic (JPG) I imported into FCS and the metadata is all there. I add notes to the keyword field in FCS, However when I check out the graphic and edit it in Photoshop CS4 the added notes aren't in the keywords field in file info (only the original keywords). I add a new note in Photoshop and re-checkin to FCS and the notes added in PS are there.
I'd like to be able to have the metadata be exchanged both ways. Note if I export the JPG the info is retained but that's a lot of work importing and overwriting of files.
-H -
"Unable to Check Out File Error" Message
I'm new to using Adobe products, so forgive me if this is a dumb question! My graphic designer sent me a INDD file to edit the text in and when I try to open it in both InDesign and InCopy, I receive an "Unable to Check Out this File" error message. I just downloaded InDesign CC and InCopy CC (the free trial versions). She said that all settings on her end should allow me to view it. Any help is much appreciated!
Thank you!I've just experienced the same error message in CS4. I got rid of it by going to the Links panel, selecting all the links to Incopy, and Unlinking.
-
Please check out my website and give me feedback
Hey you iWeb Jedi's -- please check out my web page and give me your opinions -- especially you Star Trek fans out there.
http://summerstormpictures.com
One problem I'm having is find the perfect streaming settings for the movies. I did check them on a fast Windows machine and on a brand new Mac at the local CompUSA store. Things worked well on their very fast Internet connection but the longer concept video didn't seem to want to stream. I'm almost thinking to grab some JumpCut or YouTube code and insert it just to get it to work. I know this will put their logos in but I'm just not sure what to do.
One thing I'm aware of and something I did do on purpose is that I made the background images very large -- to accomodate those wealthy folks with the very big, very wide monitors. I wanted never to run out of background "virtual" world no matter how big one stretched the browser window. Also, the necessity to scroll was intentional. Let me know if this is too annoying.
Appreciate any expert helpful comments and feedback on improvements.
No I won't update to 10.4.9! Mac OS X (10.4.8) I said no!As a teacher of marketing & multimedia presentation design, Garr Reynolds says at his site: "Design is a big, big deal. We all have a responsibility to understand its potential and its power. You do not need to be a designer — but you do need to become more design sensitive or 'design mindful'."
In particular, according to another experienced designer: "Color should be used in the same way that type size is used: to emphasize importance, not decorate a page."
Reynolds' page about why design matters is worth reading...
http://www.garrreynolds.com/Design/whydesign.html
Also this about graphic design fundamentals...
http://www.garrreynolds.com/Design/basics.html -
Multi user catalog and how to make it - use a checked out system
Lots of people want or need a Multi user ability in lightroom here is one way to achieve multi-user catalogs by using a check-in check-out system.
The Catalog would open normally upon a second user opening LR would then ask to switch to multi-user mode.
Once in multi user mode lightroom would lock-out images, collections, or folders by a checked-out for editing system.
By checking-out images, collections, or folders: files would be unavailable to other users until edits are saved, and the images, collections, or folders are checked-in.
This check-in check-out system would need a global check-in feature in case someone forgot to check in an image, collection, or folders (global check-in could be admin level). Word documents, CAD files, etc, use a similar lock-out/read only system for the files. Since, we wouldn't want to bloat the files with programing to lock out the files, this would have to be added to the catalog and managed by the catalog.
My system
Vista Ultimate 32bit SP1
AMD 64X2 duel core 6000+ 3.2Ghz
6GB 666mhz Ram PAE force enabled
NVIDIA Gforce 7600 256MB video card (1.75GB total with system shared ram)
primary hard drive 500GB
Hard drive 2 400GB (system and photoshop paging files and lightroom catalog drive)
Hdrive 3 1TB (primary image storage)
user control turned off
system graphics set to performance
Duel display
LR 2.0
PS extended CS3Your thread pool is a pool and probably keeps
the thread alive even though the thread has nothing
after a minute toi execute - you'll have to call its
shutdown() methodThanks Oxe...
I googled that (easy when you know what the answer is) and yes the ScheduledThreadPool retains threads for re-use, so you have to check that all threads are done and then shutdown() the scheduler... like this: while (!future.isDone()) {
try { Thread.sleep(10); } catch(InterruptedException e) {}
scheduler.shutdown();
... here is the complete working class:
import java.util.concurrent.ScheduledExecutorService;
import java.util.concurrent.Executors;
import java.util.concurrent.ScheduledFuture;
import static java.util.concurrent.TimeUnit.*;
import java.awt.Toolkit;
class BeeperControl {
private final ScheduledExecutorService scheduler = Executors.newScheduledThreadPool(1);
public void beepForAMinute() {
final Toolkit tk = Toolkit.getDefaultToolkit();
final Runnable beeper = new Runnable() {
public void run() {
tk.beep();
System.out.println("beep");
final ScheduledFuture<?> future = scheduler.scheduleAtFixedRate(beeper, 250, 250, MILLISECONDS);
scheduler.schedule(
new Runnable() {
public void run(){
future.cancel(true);
}, 3, SECONDS
while (!future.isDone()) {
try { Thread.sleep(10); } catch(InterruptedException e) {}
scheduler.shutdown();
public static void main(String[] args)
BeeperControl bc = new BeeperControl();
bc.beepForAMinute();
}Thanx again. Keith. -
JDev-SCM Check Out File Version
When using the RON, I have been able to successfully check out a specific version of a file using the graphical Version History Viewer (and right clicking on the appropriate node).
When attempting the same within the 9i JDeveloper IDE, however, this functionality does not appear to work the same/correctly? The node turns blue (and SCM believes the file version is checked out), but JDeveloper does not appear to reflect the same....the icon in the System Navigator does not change to indicate the file's checked out status and the specific version of the file is not written to the workarea's download directory (as is the case with the RON)....?This is Release Candidate 2 on Win2K with the Windows Look & Feel. I have tried the Oracle L&F, too, with the same outcome. The same steps in the RON, however, produce the desired result.
Thanks. -
Kernal Panics.... hardware tests check out OK
This has been an on again off again problem with my early 2008 24" iMac. Several times now I've had to reinstall the OS. It came with Leopard and I tried installing SL, but gave up about a year ago as not matter what I (or the Apple Genius's [yeah, right]) tried, we could not get SL to install. They even replaced the harddrive, logic board and several other internal components.
Now, yesterday I installed Lion to an external hard drive and then migrated everything from my MacBook (which is running Lion) to the iMac. It took approximately 8 hourst to erase the hard drive, install Lion and then Migrate. I then left my iMac on overnight... no problem. Now, today, I started working (nothing that should consume major resources... just checking eMail, checking out the new features in Lion, etc.) and suddenly, the Kernal panics have started again.
I previously had VMware installed on this iMac, but it should be gone (right?) now that I've zero'd out the HD and installed Lion.
The following is the report that was submitted to Apple after I reboot the computer. Does anybody see anything in this 'report' that could provide some insight into what might be going on? I'm going to try and delete some 3rd party software and see if that helps, but the MacBook has all the same programs and has no issues....
HELP! Please!
Interval Since Last Panic Report: 5846 sec
Panics Since Last Report: 2
Anonymous UUID: 9FEC6B59-0CCC-49AC-81B6-942CC86224FC
Mon Jul 25 10:33:26 2011
panic(cpu 1 caller 0xffffff800029102b): "vm_page_reactivate_local: found vm_page_t(0xffffff80057f1848) with wrong cpuid"@/SourceCache/xnu/xnu-1699.22.73/osfmk/vm/vm_resident.c:3092
Backtrace (CPU 1), Frame : Return Address
0xffffff80467abc30 : 0xffffff8000220702
0xffffff80467abcb0 : 0xffffff800029102b
0xffffff80467abd10 : 0xffffff8000269b62
0xffffff80467abdc0 : 0xffffff800026d19e
0xffffff80467abf40 : 0xffffff80002c1f2b
0xffffff80467abfb0 : 0xffffff80002d7961
BSD process name corresponding to current thread: Google Chrome He
Mac OS version:
11A511
Kernel version:
Darwin Kernel Version 11.0.0: Sat Jun 18 12:56:35 PDT 2011; root:xnu-1699.22.73~1/RELEASE_X86_64
Kernel UUID: 24CC17EB-30B0-3F6C-907F-1A9B2057AF78
System model name: iMac8,1 (Mac-F227BEC8)
System uptime in nanoseconds: 325322803693
last loaded kext at 21482513150: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f81155000, size 45056)
last unloaded kext at 138486626511: com.apple.driver.AppleFileSystemDriver 13 (addr 0xffffff7f81c54000, size 12288)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AppleHDA 2.1.1f11
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleMCCSControl 1.0.24
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleBacklight 170.1.9
com.apple.kext.ATIFramebuffer 7.0.2
com.apple.driver.AppleLPC 1.5.1
com.apple.ATIRadeonX2000 7.0.2
com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0b2
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.0
com.apple.driver.AppleIRController 309
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 32
com.apple.iokit.SCSITaskUserClient 3.0.0
com.apple.iokit.IOAHCIBlockStorage 2.0.0
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AirPortBrcm43224 500.36.11
com.apple.driver.AppleUSBHub 4.4.0
com.apple.driver.AppleAHCIPort 2.1.8
com.apple.driver.AppleEFINVRAM 1.5.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleFWOHCI 4.8.6
com.apple.driver.AppleUSBEHCI 4.4.0
com.apple.driver.AppleUSBUHCI 4.4.0
com.apple.driver.AppleRTC 1.4
com.apple.driver.AppleHPET 1.6
com.apple.driver.AppleACPIButtons 1.4
com.apple.driver.AppleSMBIOS 1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC 1.5
com.apple.driver.AppleIntelCPUPowerManagementClient 166.0.0
com.apple.nke.applicationfirewall 3.0.30
com.apple.security.quarantine 1
com.apple.driver.AppleIntelCPUPowerManagement 166.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOBluetoothSerialManager 2.5f17
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.driver.DspFuncLib 2.1.1f11
com.apple.driver.AppleAVBAudio 1.0.0d11
com.apple.driver.AppleBacklightExpert 1.0.3
com.apple.iokit.IONDRVSupport 2.3
com.apple.kext.ATI2600Controller 7.0.2
com.apple.kext.ATISupport 7.0.2
com.apple.driver.IOPlatformPluginFamily 4.7.0b2
com.apple.iokit.IOSurface 80.0
com.apple.iokit.IOAVBFamily 1.0.0d22
com.apple.iokit.IOEthernetAVBController 1.0.0d5
com.apple.iokit.IOAudioFamily 1.8.3fc11
com.apple.kext.OSvKernDSPLib 1.3
com.apple.iokit.IOFireWireIP 2.2.3
com.apple.driver.AppleSMC 3.1.1d2
com.apple.driver.AppleHDAController 2.1.1f11
com.apple.iokit.IOGraphicsFamily 2.3
com.apple.iokit.IOHDAFamily 2.1.1f11
com.apple.driver.AppleUSBHIDMouse 170.4
com.apple.driver.AppleHIDMouse 170.4
com.apple.driver.AppleUSBHIDKeyboard 152.3
com.apple.driver.AppleHIDKeyboard 152.3
com.apple.driver.BroadcomUSBBluetoothHCIController 2.5f17
com.apple.driver.AppleUSBBluetoothHCIController 2.5f17
com.apple.iokit.IOBluetoothFamily 2.5f17
com.apple.iokit.IOUSBHIDDriver 4.4.0
com.apple.driver.AppleUSBMergeNub 4.4.0
com.apple.driver.AppleUSBComposite 3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.0.0
com.apple.iokit.IOBDStorageFamily 1.6
com.apple.iokit.IODVDStorageFamily 1.6
com.apple.iokit.IOCDStorageFamily 1.7
com.apple.driver.XsanFilter 403
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.0.0
com.apple.iokit.IO80211Family 400.40
com.apple.iokit.IONetworkingFamily 2.0
com.apple.iokit.IOUSBUserClient 4.4.0
com.apple.iokit.IOAHCIFamily 2.0.6
com.apple.iokit.IOATAFamily 2.5.1
com.apple.iokit.IOFireWireFamily 4.4.3
com.apple.driver.AppleEFIRuntime 1.5.0
com.apple.iokit.IOUSBFamily 4.4.0
com.apple.iokit.IOHIDFamily 1.7.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 165
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.DiskImages 326
com.apple.iokit.IOStorageFamily 1.7
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.4
com.apple.iokit.IOPCIFamily 2.6.5
com.apple.iokit.IOACPIFamily 1.4
Model: iMac8,1, BootROM IM81.00C1.B00, 2 processors, Intel Core 2 Duo, 3.06 GHz, 2 GB, SMC 1.30f1
Graphics: ATI Radeon HD 2600 Pro, ATI Radeon HD 2600 Pro, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 800 MHz, 0xAD00000000000000, 0x48594D503131325336344352362D53362020
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 800 MHz, 0xAD00000000000000, 0x48594D503131325336344352362D53362020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.11)
Bluetooth: Version 2.5.0f17, 2 service, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HDT721032SLA380, 320.07 GB
Parallel ATA Device: OPTIARC DVD RW AD-5630A
USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa200000 / 2
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa230000 / 4
USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfa220000 / 3
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2I should clarify... I installed Lion to the EXHD and then did a recovery onto my iMac then migrated. I did so AFTER zero'ing out the HD and setting up a single GUID partition.
-
Configurator check-out inconsistently slow
I recently moved to a department that uses Configurator to check-out iPads to student clinicians. Over the time the department has used Configurator they have run into more and more instances of the check-out process taking an exorbitant amount of time to check out an iPad. However, this isn't always a consistent problem. The same user can check out an iPad one day and take up to 20 minutes to complete the check-out process. The same user can check out an iPad the next day and the check-out process is almost instantaneous. This happens regardless of the model of iPad (64GB iPad 2 and 64GB iPad Air), if the user always checks out the same iPad, or what data the user has saved to their profile. Several users have said they delete all their data after each use, before checking in the iPad, yet it make take up to 15 minutes to check-out an iPad the next day. For example, we have one user who always checks out the same iPad and because she requests the last iPad in the case, no one else ever checks out that iPad. Her check-out time can take up to 15 minutes on some days and 1 minute on other days. I set myself up as a new user and it checked out immediately. All of the clinicians are supposed to delete any pictures or videos they took while using the iPad. Cookies are allowed "on websites I visit."
Being fairly new to the department and Configurator I'm not sure what may have been done to lead up to this issue. I was informed that when clinicians left the department, instead of deleting their profile, they changed the name to a new clinician coming in to the department. However, even clinicians with new profiles have been known to have this problem occur. Is it a normal function of Configurator, that it can be randomly slow to setup an iPad during the check-out process? Or is there something that may have been done to create this issue? Is our lack of available backup space contributing to the problem?
Specs:
Apple Configurator Version 1.5
Mac mini Server
Processor: 2 GHz Intel Core i7
Memory: 4GB 1333 MHz DDR3
Graphics: Intel HD Graphics 3000 384 MB
Software: OS X 10.9.5
Storage: Backup - 500 GB SATA Disk, 33.83 GB free out of 499.76 GB
Server HD - 500 BG SATA Disk, 441.47 GB free out of 499.25 GBWe just have a couple of clients at the moment, but we wanted to get a solid workflow down before we bring in more people. You're right that we don't capture directly to the network drive due to fear of dropped frames.
If a 2nd client checks out a project that a different client checked in, I understand that the media will need to get copied over from the server's network storage to that 2nd client. I just hoped that the original client that checked something in could check it back out without having to download the media when that client already has those files elsewhere on their local drive.
Matt -
Checking Out MSI's N680GTX TwinFrozr III 2GD5/OC
The nice thing about the MSI N680GTX TwinFrozr III 2GD5/OC is the high clocks you get out of the box. Speed is pre-overclocked from 1006MHz Core to 1058MHz with a turbo boost as high as 1.1GHz. Aside from this, the card is equipped with a very nice and silent Twin Frozr III cooler. With this, you could still push the N680GTX clocks higher while keeping down the temps and worry not of component overheat.
The card is equipped with Solid Capacitors which lasts up to 10 years, better efficiency, lower temperature and no cap explosion.
MSI Afterburner on the other hand is bundled with the card for software overclocking but I suggest you to download the latest version of it in the internet.
Twin Frozr III cooler with 2x 80mm Propeller Blade Fan Technology which provides 20% more airflow. The aluminium brushed gunmetal color of the TwinFrozrIII heatsink cover looks really cool.
Like all GTX680s, tri-SLI is capable with this SKU/model and additional 2x 6Pins for power. I’m not sure if I mentioned this before but the minimum PSU requirement for the video card is only 550W 30A for the 12V.
I just noticed it now and I’m quite surprised that there are two heatpipes on the top area of the card thus for better heat dissipation.
3x 8mm heatpipes at the bottom area. Check out the solid capacitors - all lined up.
Back area of the card. Very clean and neat.
Just curious about this embedded chip at the back of the card.hmmm…….
Output terminal (left to right). Display Port, HDMI, Dual-link DVI-I, Dual-link DVI-D
Bundled Accessories:
Quote
• 2x 4Pin Molex Connector to 6Pin Power
•1x DVI to VGA dongle
• Utility Disc
• Manual and Quick User’s Guide
Test Platform:
Quote
•Processor: Intel Core i7 3770K
•CPU Cooler: Thermaltake Frio Advance
•Memory: Kingston HyperX 2x4GB DDR3 2133MHz
•Motherboard: MSI Z77A-GD80
•SSD: Kingston SSD HyperX 3K 90GB
•PSU: Antec True Power Quattro 1200W
First set of tests are on all stock settings and the 2nd will be on OC settings (CPU and videocard)
3dmark06 – 29710
Vantage – P33009
3dMark11 – P9968
Heaven DX11 – 2025.825
2nd Set of Tests
3dmark06 – 36489
Vantage – P37647
3dMark11 – P11025
Heaven DX11 – 2185.309Bernhard, how come your graphics shows as the IGD and not the GTX 580? To be somewhat apples and apples comparison, this is what I get without MVP and a reference GTX 680. This is the GTX 680 @ 1006, same mainboard, same RAM speed of 2133, and CPU as the OP. The CPU was running lower than the OP @ 44X to his 48X, but I also note that his VGA bandwidth is 8X and mine was 16X. I can't run MVP as I don't have a monitor that will adapt (or an adapter) to the onboard 15-pin connection. Mode Screen Res. was 1680X1050 (max for my monitor) along with the AA set @ 4X.
Settings make a world of difference. Same except Tessellation is set to 'Disabled'. -
In one of site collection at our SP2013 farm, we have "SharePoint Server Publishing" site feature and "SharePoint Server Publishing Infrastructure" site collection feature activated.
One of user (UserA) create a page in a page library. The new page is marked as "checked out by UserA". It is fine.
Then UserA open the page -> edit page -> key in something and "save". Then the page prompt him "The file Pages/subfolder/test001.aspx has been modified by i:0#.w|test\userA on 8Aug2014 xx:xx:xx" and ask him to choose "Leave
this page" or "say at this page". The date time is exactly the time he was editing the page.
Whatever he choose will save the page and return to "View" mode (non-edit mode).
It is not the only problem. When userA want to edit the same page again and save, it prompt him that "The page could not be saved because your changes conflict with recent changes made by another user. If you continue, your changes will be lost."!
When userA choose continue or "check out". Follow screen show up:
What can we do? In summary, userA cannot edit a page because userA have checked out! We have tried for different users have exactly same issue.We are having the same problem, the one thing we have found is if we use the Save Icon on the top right hand side of the page in the ribbon (next to follow), that Save works just fine. What is causing the issue is when trying to use the Save Icon on
the left hand side of the ribbon that has the dropdown options to 'Save', 'Save and Keep Editing' or 'Stop Editing'. It doesn't matter if you just click on the main Icon or choose any of the dropdown options, they all cause issues with the pages.
Thoughts?
Nick Hurst -
Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?
I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp
-
How do I use the itunes credit I have on my MAC? I received a gift card and loaded it on my MAC. I want to buy itunes. When I go to check out it asks for my credit card info. How do I use the credit?
Purchase and Redeem an iTunes Gift Card.
How to Redeem a Code > http://support.apple.com/kb/ht1574 -
Hi there,
Following a migration to SharePoint 2013, the follow options have been disabled (Open and Check out + Manage) (see below). These are critically important functions and make it very hard to make SharePoint a useable interface. Any guidance on how to resolve
these issues is greatly appreciated. This is not a branded website, and there has been no changes made to the standard interface.
Kind regards
Jarrad KoppenI'm not sure what the easiest way is either. First, I would try to create a new site collection with a new library and see if you get the same behavior. If not, then its something in the upgrade process. If it does that also would point
to something being wrong in the way that javascript is being executed.
If it is happening everywhere I suspect you'll have to start tracing javascript using something like IE developer's toolbar to see why the status on those buttons isn't changing when you select a document. I'm not sure what else to suggest.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
Time evaluation generate check out entry
Dear Gurus,
How can we generate Check out entries thru Time evaluation?
The sales employees come to office in the morning, they punch in and leave for sales activity. They don't get overtime, but pay / absence quota deducted if they don't check in in the system.
While running Time evaluation, I am getting error in TE03 (delimiting error). I hv tried creating second entry using TF00. Its not working. Has anybody any solution for this?
Regards,
VijayHi Gurus,
I am rephrasing my requirements. have 2 queries,
1. Sales Employees make only Clock In entries. System should generate the clock out entry or should not throw any error message. System should consider total working time from daily work schedule.
- TE30 function is generated the entry in TEVEN table based on planned end time, but we need to create the entry in IT2012 otherwise, while processing next days entry, it generates error.
- Will TF00 create an entry in Time Events IT2051 ? IF yes, how can I tweak TF00 rule to generate Time out entry.
2. General Staff working hours need to be calculated from Shift Start even if they come early. Max working time is 12 hours with 4hrs from start of end of Shift period
- If shift start is 7AM, I have defining Start tolerance as 6AM to 7:05AM, but still the system is considering the Clock In time for hours worked.
I have to write this condition. How to write ?
If Clock-in Time < Start Time
Then TIP->From = Start Time
I believe it has to be put in TL10 after rounding the Check in & check outs.. so as to update table TIP,
Please suggest,
Regards,
Vijay -
I need to host a Shared PDF on SharePoint 2010. If it is on SharePoint can only one person comment at a time? I know documents have to be checked out when using SharePoint. I need multiple users to be able to comment in real time and see comments in real time. Is this possible?
try here:
http://www.bbb.org
File a complaint with them. Verizon will call you to fix the blunder.
But remember it is always up to the customer to insure what they are getting and what it costs. Don't trust the word of a sales person who makes their living on getting that sale. Lies, deceit or false promises will be and have been used by sales people for thousands of years.
Good Luck
Maybe you are looking for
-
Transport request could not be released
hi guys, im trying to release a request thru se09 after successfully releasing the task.the request could not be released. it gives this error message TEST CALL OF TRANSPORT CONTROL PROGRAM (tp) ENDED WITH RETURN CODE 0212. <removed_by_moderator> Rea
-
Acrobat 9 can´t send Emails from Outlook 2010 (x64)
Greetings from Germany: I have a big problem with Acrobat Standard 9.4.1 and Outlook 2010 on Windows Server 2008 R2. Hope someone can help me with this Problem. Systeminfos:: * Windows Server 2008 R2 x64 * Acrobat Standard 9.4.1 x32 * Outlook 2010 x6
-
Problem in AD Group membership Insert Error "Response: CURRENT_ATTRIBUTES"
Hi all, I am using Oracle Identity and Access Management 11g (11.1.1.5.0) with Weblogic 10.3.5 and apply patch -11.1.1.5.4. I have install AD Connector (activedirectory-11.1.1.5.0) and recon Group, OU and Users as a target source Successfully. When I
-
FAX through PBX connected to Router
I do implementation in which PBXs are connected to Cisco routers using E&M ports at several sites. A FAX machine is connected to an extension on the PBX needs to communicate with another FAX machine connected to the PBX at another site. The settings
-
Lumia 925 no icon image when phone restarted
since i got the lumia cyan update every time my phone is restarted pinned website icons disappear from the front screen. thought the actaul website is there the space appears blank. it also happens if i change my phone theme colour. any ideas how to