Checking Out MSI's N680GTX TwinFrozr III 2GD5/OC

The nice thing about the MSI N680GTX TwinFrozr III 2GD5/OC is the high clocks you get out of the box. Speed is pre-overclocked from 1006MHz Core to 1058MHz with a turbo boost as high as 1.1GHz. Aside from this, the card is equipped with a very nice and silent Twin Frozr III cooler. With this, you could still push the N680GTX clocks higher while keeping down the temps and worry not of component overheat.
The card is equipped with Solid Capacitors which lasts up to 10 years, better efficiency, lower temperature and no cap explosion.
MSI Afterburner on the other hand is bundled with the card for software overclocking but I suggest you to download the latest version of it in the internet.
Twin Frozr III cooler with 2x 80mm Propeller Blade Fan Technology which provides 20% more airflow. The aluminium brushed gunmetal color of the TwinFrozrIII heatsink cover looks really cool.
Like all GTX680s, tri-SLI is capable with this SKU/model and additional 2x 6Pins for power. I’m not sure if I mentioned this before but the minimum PSU requirement for the video card is only 550W 30A for the 12V.
I just noticed it now and I’m quite surprised that there are two heatpipes on the top area of the card thus for better heat dissipation.
3x 8mm heatpipes at the bottom area. Check out the solid capacitors - all lined up.
Back area of the card. Very clean and neat.
Just curious about this embedded chip at the back of the card.hmmm…….
Output terminal (left to right). Display Port, HDMI, Dual-link DVI-I, Dual-link DVI-D
Bundled Accessories:
Quote
• 2x 4Pin Molex Connector to 6Pin Power
•1x DVI to VGA dongle
• Utility Disc
• Manual and Quick User’s Guide
Test Platform:
Quote
•Processor: Intel Core i7 3770K
•CPU Cooler: Thermaltake Frio Advance
•Memory: Kingston HyperX 2x4GB DDR3 2133MHz
•Motherboard: MSI Z77A-GD80
•SSD: Kingston SSD HyperX 3K 90GB
•PSU: Antec True Power Quattro 1200W
First set of tests are on all stock settings and the 2nd will be on OC settings (CPU and videocard)
3dmark06 – 29710
Vantage – P33009
3dMark11 – P9968
Heaven DX11 – 2025.825
2nd Set of Tests
3dmark06 – 36489
Vantage – P37647
3dMark11 – P11025
Heaven DX11 – 2185.309

Bernhard, how come your graphics shows as the IGD and not the GTX 580? To be somewhat apples and apples comparison, this is what I get without MVP and a reference GTX 680. This is the GTX 680 @ 1006, same mainboard, same RAM speed of 2133, and CPU as the OP. The CPU was running lower than the OP @ 44X to his 48X, but I also note that his VGA bandwidth is 8X and mine was 16X. I can't run MVP as I don't have a monitor that will adapt (or an adapter) to the onboard 15-pin connection. Mode Screen Res. was 1680X1050 (max for my monitor) along with the AA set @ 4X.
Settings make a world of difference. Same except Tessellation is set to 'Disabled'.

Similar Messages

UEFI GOP VBIOS MSI 7850 TWIN FROZR III 2GD5/OC

Hello,
was wondering about the latest Bios for my card:
S/N V273-050B1303033755
Thanks for your help!
Tom

Use the attached.
Create a bootable usb stick (https://forum-en.msi.com/index.php?topic=165175.0).
Then unpack the provided archive (150.rar) and put the included file (TV273MH.150) on that stick.
Rename TV273MH.150 to 150.rom. Put the atiflash.exe also included in the archive on the USB stick too. Now boot from the stick.
Type atiflash -p -f -noaper 0 150.rom [ENTER] and let it flash the vbios.

Bsod 2gd5/oc msi gtx660 twinfrozr III

Hi. I have big problem. About week ago i was playing game when screen get black. So, i restarted the computer and now i getting bsod during windows loadning. BSOD 0x116. I'm using win 7 64 bit. Graphic card 2gd5/oc msi gtx660 twinfrozr III. Motherboard msi z77a g45. Sorry for my bad english but i hope you understand some of it Psu: XFX CORE 550W. Cpu: i5 3570k.

But that's still Nvidia drivers, you haven't answered my question:
Quote from: Svet on 25-April-13, 02:52:02
if you use onboard GPU do you have such issues?

MSI GTX570 TwinFrozr III Power Edition: Unstable at stock unless fan is 100%

Hello Everyone,
I got my GTX 570 TwinFrozr III Power Edition yesterday and I like it a lot. I've been testing it and running it through various benchmarks and games to find the best stable overclocks with Afterburner. By doing this I noticed a few things that lead me to question if there is a problem.
Before I started trying to overclock, I ran the card at the stock settings 770core/1540shader/2000memory @ 0.962v and tried various benchmarks and stress tests. Immediately I noticed there were errors and artifacts. I tried to increase voltage and I noticed that the artifacts and errors were going away, so I thought maybe my VID was too low... at 1.012v it seems to be error free at stock settings.
I tried another thing as well, I left the card at stock VID (0.962v) and put the fan speed to 100% and I noticed all errors and artifacts completely gone. So I lowered fan speed to 70% because 100% is too loud for me and 70% is still pretty loud but it's better... I found that at 70% I still got some errors but not a lot. Let me just say that my GPU Core temperatures are amazing. never over 62c.
So now I don't know if there is a problem with my card or the factory just gave it too low of stock VID. I think it's kind of weird that at stock settings that the card would produce artifacts and errors unless the fan speed is at 100%. I'm guessing MSI factory tested stock overclocks with 100% fan speed?
I love this card, but if I ever resell in the future and someone installs this card they will think its broken.
Let me just state that finally, the card is an overclocking monster. I am now at 950core/1900shader/2300memory @ 1.082v without any errors... The only problem I have is that when I run unigine heaven I see some of these graphical anomalies. Here's an example I found online which is exactly what I see. http://fotohost.lv/images/n6azp80ru74so1ecp009.jpg
So far I'm not sure what the cause is for that... but I think that when I put the fan at 100% I didn't see it. I could be wrong, but I will test again when I wake up tomorrow.
Thanks MSI.

Thanks for the reply Henry, but the problem here is that it wasn't stable from the factory at their settings.
Do you understand how this can be problematic for me if I ever decided to sell the card? It is no problem for me to raise the voltage at all. I think this card is phenomenal, but if I ever sold this card to someone else who doesn't want to or know how to overclock or adjust voltages, it would be classified as a broken or faulty video card.
Also scratch the stability at 100% fan speed. I still get some errors, although not many. The card seems to be stable around 1.018 volts at default overclocked settings.
I just didn't expect MSI to make a mistake on the stock VID. If there were a way for them to fix it through a bios update it would be great.
Edit: Just for the record, the card is a great overclocker and is very stable. The only gripe I have is that it isn't stable at default frequencies unless I bump voltage to 1.018. This is no problem for me, but if I ever were to sell this card, I would have to have a disclaimer that it is unstable unless you put voltage higher?
I'm just trying to figure out if this could be some oversight on MSI's part and if it isn't, could my card not have been quality inspected?

[REQUEST] GOP / UEFI BIOS N680GTX TwinFrozr 2GD5/OC

I'd like to request the newest GOP UEFI Firmware for my N680GTX TwinFrozr 2GD5/OC.
SN: 602-V282-080B1209141710
Quote
NVIDIA Firmware Update Utility (Version 5.206)
Simplified Version For OEM Only
Adapter: GeForce GTX 680 (10DE,1180,1462,2821) H:--:NRM S:00,B:01,PCI,D:00,
F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the
EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
IFR Data Size : 996 bytes
IFR CRC32 : 618097B0
IFR Image Size : 1024 bytes
IFR Image CRC32 : 99B4BB8D
IFR Subsystem ID : 1462-2821
Image Size : 182272 bytes
Version : 80.04.47.00.39
~CRC32 : 6A63B966
Image Hash : 1EE8B53E3FE44ED5480258C754D14613
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20020000
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 680
Board ID : E10C
PCI ID : 10DE-1180
Subsystem ID : 1462-2821
Hierarchy ID : Normal Board
Chip SKU : 400-0
Project : 2002-0000
CDP : N/A
Build Date : 06/29/12
Modification Date : 07/27/12
UEFI Support : Placeholder
UEFI Version : N/A (Placeholder)
UEFI Variant Id : N/A (Placeholder) ( Unknown )
UEFI Signer(s) : Unsigned
Sign-On Message : NVIDIA GeForce GTX 680
MSINV282MS.114
Thank you !

Quote from: Svet on 23-March-15, 23:15:20
here is the uefi vbios for your card, attached below
Thank you very much for helping.
Unfortunately i got that error by trying to flash the rom:
Quote
C:\nvflash>nvflash.exe NV282MH.rom
NVIDIA Firmware Update Utility (Version 5.206)
Simplified Version For OEM Only
Checking for matches between display adapter(s) and image(s)...
Warning: Please make sure the NVIDIA Display Driver is not loaded by disabling
using Device Manager before continuing. Else update may fail, and
system may crash!
Press 'y' to continue (any other key to abort):
Adapter: GeForce GTX 680 (10DE,1180,1462,2821) H:--:NRM S:00,B:01,PCI,D:00,
F:00
WARNING: Firmware image PCI Subsystem ID (1462.2823)
does not match adapter PCI Subsystem ID (1462.2821).
ERROR: PCI subsystem ID mismatch

MSI N680GTX Twin Frozr 2GD5/OC minimum fanspeed

I have a question about the MSI N680GTX Twin Frozr 2GD5/OC videocard. What is the minimum percentage the fan can be set (without modifying the bios)? And at which RMP are the fans running at in that case?

For anyone who is interested, MSI gave me these answers:
"40% is the minimum."
"At minimum 40% the Fan RPM will be around 1000 range."
But from someone who ows the card I got the following answers:
The minimum is 35% in Afterburner and the will spin at 1260/1290RPM.

2d Screen Flickering - MSI R9 280X TwinFrozr OC 3GB (R9 280X GAMING 3G)

Hello,
OS: Win 8.1 - 64bit
GFX: MSI R9 280X TwinFrozr OC 3GB (R9 280X GAMING 3G)
GPU-Z:
2d flickering, it seems, when it downclocks to 300Mhz, the screen starts flickering, and can't run games in 2d mode without flickering. The GFX is perfectly fine playing games in full screen.
Any ideas, folks?
I'm sure that changing the clock to 450Mhz default would fix this, or perhaps 500Mhz, but I don't know how I should do that, and maybe there is another fix for this.
Bios Attached as well: mega.co.nz/#!bt5XiSAa!6d07jJRFNM4lT3zWDAmyGnqTo-V4zsqZe4FW5LZEdz0
Thanks!

I know this has been longer than 60 days. However I just wanted to post my fix for others in case its searched for. This has been so frustrating to figure out. My fix has been a variety of things such as clean installs of the drivers MANY MANY times. The final time I reinstalled the ATI's CCC driver 14.7 beta. I noticed that I unknowingly (by ignorance not action) installed MSI's version of CCC from there website as well. After (not) installing MSI's version on top it seemed to help but the clock speeds still fluctuated from 300MHZ- to the max 1020MHz continuously. After looking in the CCC I saw an option that caught my eye. "Alternate DVI Operational Mode" is checked by default on both screens options. So I unchecked it...applied changes.... VIOLA no more flicker and clock speeds have been stable for the past 5 hours. I however have not restarted my computer for fear it will return and I throw the computer out the window. This is atleast worth an attempt if you have the dreaded "Flicker" of the R9 280X.
For information my setup is as follows:
M/B- MSI A88X-G45 Gaming
processor: AMD A10-7850K (AMD A series black edition APU) w/ r7 200 series
2 (cheap @ around 120$ each) Monitors- Acer (G246HL) and LG (22M45) 60Hz running at 1920x 1080
PSU: (Cheap 35$) 600W
HDD: 1TB (Master) and 2TB (slave) seagate SATA drives
VIDEO: MSI R9 280x 3gb Video card
Issue noticed: Flicker when running either one or two (Extended screen) monitors usually while browsing, schoolwork, or watching netflix (2D actions???) and less but still during StarCraft 2 game play. tried just about every forums suggestions except the one about changing a register key profile.
Outcome of above suggestions: Relief....so far (6 hours later)

READ THIS FIRST: Check out the Developer Guide, other forums and Wikis

The Portal Content Development forum is one of the most-active forums on SDN, and many, many experts read it and can answer your questions.
Before posting, please check out the following sources of information:<ul><li><b><a href=http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm target="_blank">Portal Developer Guide</a> (2004) </b>and<b> <a href=http://help.sap.com/saphelp_nw2004s/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm target="_blank">Running an Enterprise Portal (developer guide)</a> (2004s):</b> This is THE source for information on portal APIs. All of the public APIs are documented here. </li>
<li><b><a href=https://wiki.sdn.sap.com:/wiki/display/EP>Portal Wiki</a>:</b> See below.</li>
<li><b>This Forum:</b> Someone probably has already asked your question. Before adding another post, check if you can find a similar post that has sufficient information to help you. </li></ul>
<h3>Other forums</h3>
<li>Employee self service questions: https://forums.sdn.sap.com/forum.jspa?forumID=267</li>
<li>Visual Composer questions: https://forums.sdn.sap.com/forum.jspa?forumID=58</li>
<li>Web Dynpro for Java questions: https://forums.sdn.sap.com/forum.jspa?forumID=52</li>
<h3>More on Wikis</h3>The recently announced Wiki functions of SDN will, over time, be a great start for getting information about portal development and implementation...
The main wiki portal page is <a href="https://wiki.sdn.sap.com:/wiki/display/HOME/Portal">here</a>.
Please read this before asking a question in the forum - believe me, there are not many new questions being asked!
There is quite a bit of repetition in forum questions, and maybe if people are directed to the wiki page as a first step, it may make it easier to watch this forum.
The Wiki concept is all about sharing within a community, so feel free to modify the content - more accurately 'our' content - and maybe start some other pages, such as one about modifying logon pages - a fairly consistent topic in this forum
Edited by: Michael Nicholls on Feb 18, 2009 9:48 AM
Edited by: Michael Nicholls on Feb 18, 2009 9:49 AM

Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
Given the settings" irq's are a major",part of directing traffic and power? example:
Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored: no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
I can honestly say my system is error free and running like a dream.
xp 2500 barton 333
creative sound 5.1gamers.
512 mb kingston ram 400 mhz
boadband either onboard.
MSI 5700 128 mb ddr
Setting are:
163 fsb
mult of 11
ddr 333
video memory clock down to 450mhz
3d clock to 390mhz
The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

MSI Media Center Deluxe III !!! Crash all time..

Hi
MSI Media Center Deluxe III keeps crashing. Is there any fix to this problem yet. All seams to have this problem.
I run XP Home SP1 with all live updates done. My Mega 865 only run MSI Media Center Deluxe III utility, since i only wish to install what i wish to use.
The MEGA 865 was bought due i wanted a pc/radio/cd combination. But since MSI Media Center Deluxe III will not start due crash when i starts.. The media machine is useless for me.
I hope MSI can give us an update so this will work. Also if this program will not work with some other software, give us a list :hypecrite:

After several attempts at getting my HTPC to function consistently....it became obvious......disable Media Centre III and install software that is functional and supported....with authors that listen to your suggestions and problems.
Here is what I did and I now have what I believe is a fully functional and integrated HTPC.
Install either MyHTPC (free) or Meedio (commercial version)
I use Meedio to do the following
Play movies from my Maxtor external 250GB hard drive using Bsplayer - movies are catalogued and cover art viewable (used DVD Profiler to maintain library)
Play Music from my internal 200GB seagate drive - music collection catalogued including covers etc
Play TV using Chris-TV. tv@anywhere also sucks so I do not use the supplied software and I have thrown away the tv@anywhere remote control. (Now using Streamzap remote) Chris-TV has much better tuning capabilities and works well with the streamzap remote.
Play DVD using the MSI DVD Player (using PowerDVD ) - note bsplayer also works well but i prefer the PowerDVD skins/interface
Play radio using MSI radio (yes I did keep some msi software) as it worked and it is not important enough for me to be bothered with anything easier to use
Play CD using the MSI CD player (using WMP9)
Call up Internet weather & Radar (Australian Weather only)
Launch internet browser
Play/Display pictures (digital camera snaps) from the home network (pictures are stored on separate PC)
Control home automation - Motorised screen up/down, theatre lights up/down/on/off, Seat lights on/off, projector on/off etc
To get this working seamlessly with one remote control - I use the streamzap remote.....everything mentioned above works flawlessly with this remote so I have also thrown the MSI supplied remote in the garbage.
I now have Meedio in my start-up instead of media centre III and my remote has a macro button that can also launch it. I have a standby macro on the remote that puts the mega 865 to sleep but I still have to manually wake it up (ie touch it)
The litmus test to all of this was to hand the remote to my wife's blonde friend and asked her to play a certain movie on the projector. The HTPC was sight unseen to her before trying this and she was able to (using the remote) navigate her way to the movie through the various features of the HTPC without me having to show her how. And not once did it stop/stall/freeze/reboot/go slow.
Happy to share in the details of how to get this all running to get the best out of the Mega 865.

Checked-out projects won't deploy.

When I check out a project using the Subversion client of JDeveloper, I can get the project to build but not deploy.
BEA-149265 - Failure occured in the execution of deployment request... Error is 'weblogic.application.ModuleException: Failed to load webapp:...'.
Any ideas?
Thanks!
Edited by: user10483403 on Nov 19, 2008 9:16 AM
Edited by: user10483403 on Nov 19, 2008 9:17 AM

Adding the .adf directory and associated files that weren't added to subversion by default and by selecting the ADF JARS in the Project Properties dialog, aloud the application to attempt to launch in the web browser, however the following error occured:
Error 500--Internal Server Error
java.lang.NoClassDefFoundError: oracle/jbo/uicli/mom/JUMetaObjectManager
at oracle.adfinternal.view.faces.config.rich.FacesDatabindingConfigurator._setupAdfDatabindingForJsf(FacesDatabindingConfigurator.java:80)
at oracle.adfinternal.view.faces.config.rich.FacesDatabindingConfigurator.init(FacesDatabindingConfigurator.java:38)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.init(GlobalConfiguratorImpl.java:368)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.beginRequest(GlobalConfiguratorImpl.java:199)
at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.getExternalContext(GlobalConfiguratorImpl.java:304)
at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl$CacheRenderKit.(FacesContextFactoryImpl.java:86)
at org.apache.myfaces.trinidadinternal.context.FacesContextFactoryImpl.getFacesContext(FacesContextFactoryImpl.java:64)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:260)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:102)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:65)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Any ideas at to why this occurred would be appreciated!
The prefacing log:
[Another instance of the application is running on the server. JDeveloper redeploy the application.]
[Application JTW stopped but not undeployed from Server Instance DefaultServer]
[Running application JTW on Server Instance DefaultServer...]
---- Deployment started. ---- Nov 19, 2008 12:49:47 PM
Target platform is (Weblogic 10.3).
Running dependency analysis...
2008-11-19 12:49:48.661: Writing WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\JTW\Feast1-FeastProject1-webapp
2008-11-19 12:49:48.801: Wrote WAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\JTW\Feast1-FeastProject1-webapp
2008-11-19 12:49:48.895: Writing EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\JTW
2008-11-19 12:49:48.911: Wrote EAR file to C:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs\JTW
Redeploying Application...
<Nov 19, 2008 12:49:49 PM EST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application JTW is not versioned.>
Nov 19, 2008 12:49:56 PM com.sun.faces.spi.InjectionProviderFactory getProviderInstance
SEVERE: JSF1030: The specified InjectionProvider implementation 'com.bea.faces.WeblogicInjectionProvider' cannot be loaded.
<Nov 19, 2008 12:49:56 PM EST> <Error> <HTTP> <BEA-101165> <Could not load user defined filter in web.xml: org.apache.myfaces.trinidad.webapp.TrinidadFilter.
java.lang.NoClassDefFoundError: oracle/jbo/uicli/mom/JUMetaObjectManager
     at oracle.adfinternal.view.faces.config.rich.FacesDatabindingConfigurator._setupAdfDatabindingForJsf(FacesDatabindingConfigurator.java:80)
     at oracle.adfinternal.view.faces.config.rich.FacesDatabindingConfigurator.init(FacesDatabindingConfigurator.java:38)
     at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.init(GlobalConfiguratorImpl.java:368)
     at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.init(RegistrationFilter.java:47)
     at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.init(TrinidadFilterImpl.java:92)
     Truncated. see log file for complete stacktrace
java.lang.ClassNotFoundException: oracle.jbo.uicli.mom.JUMetaObjectManager
     at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:283)
     at weblogic.utils.classloaders.GenericClassLoader.findClass(GenericClassLoader.java:256)
     at weblogic.utils.classloaders.ChangeAwareClassLoader.findClass(ChangeAwareClassLoader.java:54)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     Truncated. see log file for complete stacktrace
>
Application Redeployed Successfully.
Elapsed time for deployment: 9 seconds
---- Deployment finished. ---- Nov 19, 2008 12:49:56 PM
Run startup time: 9189 ms.
[Application JTW deployed to Server Instance DefaultServer]
Target URL -- http://127.0.0.1:7101/Feast1-FeastProject1-context-root/faces/Login.jsp
Nov 19, 2008 12:50:00 PM oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImpl setLifecycleContextBuilder
WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfinternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
<Nov 19, 2008 12:50:00 PM EST> <Error> <HTTP> <BEA-101017> <[weblogic.servlet.internal.WebAppServletContext@5dae04 - appName: 'JTW', name: 'Feast1-FeastProject1-context-root', context-path: '/Feast1-FeastProject1-context-root', spec-version: '2.5', request: weblogic.servlet.internal.ServletRequestImpl@165b2e4[
GET /Feast1-FeastProject1-context-root/faces/Login.jsp HTTP/1.1
Accept: */*
Accept-Language: en-us
Accept-Encoding: gzip, deflate
User-Agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727; .NET CLR 1.1.4322; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)
Connection: Keep-Alive
]] Root cause of ServletException.
java.lang.NoClassDefFoundError: oracle/jbo/uicli/mom/JUMetaObjectManager
     at oracle.adfinternal.view.faces.config.rich.FacesDatabindingConfigurator._setupAdfDatabindingForJsf(FacesDatabindingConfigurator.java:80)
     at oracle.adfinternal.view.faces.config.rich.FacesDatabindingConfigurator.init(FacesDatabindingConfigurator.java:38)
     at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.init(GlobalConfiguratorImpl.java:368)
     at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.beginRequest(GlobalConfiguratorImpl.java:199)
     at org.apache.myfaces.trinidadinternal.config.GlobalConfiguratorImpl.getExternalContext(GlobalConfiguratorImpl.java:304)
     Truncated. see log file for complete stacktrace
>
Edited by: user10483403 on Nov 19, 2008 10:06 AM

REQUEST UEFI GOP VBIOS for N680GTX Twin Frozr 2GD5/OC

Hello,
Can I get the UEFI GOP VBIOS for the N680GTX Twin Frozr 2GD5/OC?
S/N: 602-V282-02SB1204022838
Link to Rom: filedropper.com/gk104
If you need any other information, please let me know.
Thanks!

Use >>this<<
Decompress the provided .rar archive with Winrar: http://www.rarlab.com/download.htm
Then flash the included file with Nvflash for dos: http://www.guru3d.com/files_details/nvflash_download.html
To do so rename the included file to .rom and create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0)
Put nvflash and the vbios file on it and boot from the stick. Then type nvflash -4 -5 -6 gop.rom (if renamed vbios that way) and hit enter. Confirm the questions and let the tool flash.

Help flashing UEFI bios for my GTX 680 Twin Frozr III 2GD5/OC

Hi,
I am very new to flashing graphics card bios, so i need some instructions as to how to update my bios to the latest UEFI GOP version. I am using a Z77 platform with Windows 8 Pro and I'm looking forward to the super fast boot times
Here is my current bios file: **http://www.filehosting.org/file/details/434943/GK104.rom**
Here is my serial number: 602-V282-020B1205147435
My model: MSI GTX 680 Twin Frozr III 2GD5/OC
Thank you

I have followed the steps you said, but had a few hiccups on the way:
1) when i was flashing the rom, i was told in the command line dialog box that the pci vendor identification/verification was mismatched, i was prompted to override verification and i pressed "y". Is that ok ? In total, i had to press "y" 2 times as opposed to once as said in your instructions.
2) After flashing bios, I restarted and disabled CSM (compatibility mode) support. My PC booted fine and i reached the lock screen. But when i entered the password, I was introduced to a black screen with only the cursor showing over it. Then my pc crashed with the error IRQ_NOT_LESS_THAN_OR_EQUAL_TO
3) I restarted and logged back again, but was introduced to the same black screen again, but i could gain access to the control panel with CLT+ALT+DEL and it was filled with error reporting tasks. I restarted the third time and finally could log back in without any crashes or black screens, but windows came up with a prompt that it had run into an error and needs to report it.
I am suspecting that it had something to do with the driver or the verification.
PLEASE HELP. Thanks

N680GTX Twin Frozr 2GD5/OC problem world of tanks low fps

hello, my problem is that when I play the game is perfectly just that at times have graphical settings you have the fps drop considerably and my question is if the graph problem that is defective or a problem known and solvable

Board: EVGA X58 SLI
Bios: Version 83
VGA: N680GTX Twin Frozr 2GD5/OC
PSU: OCZ ModXtream 700W(46a 12v rail)
Intel Intel® Core™ i7-980 Processor (12M Cache, 3.33 GHz, 4.8 GT/s Intel® QPI)
MEM: G.Skill Ripjaws DDR3 1600 PC3-12800 12GB 3x4GB Memoria DDR3
HDD: WD VelociRaptor 300GB Raid 0
COOLER: Arctic Cooling CPU Freezer 13 Pro
OS: Windows 7 64bit Ultimate
game settings high ,but the problem still happens to me all at least put my mind to look at the bottom of the map before had the MSI 660 OC and worked perfectly, this happens to me with this graphics card

(SLI) N680GTX Twin Frozr 2GD5/OC - GOP/UEFI Biorequest

1st: N680GTX Twin Frozr 2GD5/OC - S/N:602-V282-080B1210047543
2nd: N680GTX Twin Frozr 2GD5/OC - S/N 602-V282-080B1209142482
Some time ago i did a request for my first card (worked perfect), but since my MSI motherboard crashed and i'm currently running on a ASUS P8Z77-V PRO motherboard i had to reinstall my gpu and i added a second (Both MSI). Could you please verify if i need a new Vbios for fast boot? and if that is the case, do i need to flash both of my card? for better stability or anything?
Here's my vbios on both cards: Code: [Select]
http://speedy.sh/eDqsa/GPU2-GK104.rom

Quote from: Svet on 30-August-13, 19:33:45
here it is gop version
yes you can since both are sharing the same bioses
Successfully flashed one, but how do i flash the second? ^^

New! Check out docupedia

Check out [docupedia|https://cw.sdn.sap.com/community/docupedia], our documentation wiki for additional content and community contributions.
What are the advantages of docupedia?
u2022     Community knowledge will increase the quality of the SAP documentation
u2022     In conjunction with product documentation, you can find related best practices,
implementation experiences, OSS Notes and step-by-step guides
u2022     You can let us know what you like/donu2019t like about our documentation
u2022     Lower your total cost of understanding through more effective documentation.
u2022     Get connected with SAP Netweaver experts

I took the "Spot the Counterfit" quiz.
Two of your products are wrong (Canon incorrectly confuses the genuine and the fake).
The first is #2 of 10 on the quiz. The printing quality on the back of one battery is extremely poor -- that's the battery the quiz claims is genuine and then the tip on the quiz (after you pick the product you think is the fake -- the test always shows the tip on how you would have spotted the difference), Canon specifically calls out the poor printing quality on the fake (so I'm sure whoever put the quiz together just got them reversed.)
The second is #8 of 10 on the quiz -- the LP-E6 battery. I own a LOT of these batteries as I have three different bodies that use them and two of the bodies have battery-grips. Three of the batteries came from Canon with the camera bodies -- three additional were purchased from authorized dealers at the time of puchase. The labeling on the genuine Canon LP-E6 batteries is identical to the battery the quiz labels as the fake. One of the icons (a spot with a check box in it) is located in the wrong location and the caution label is printed first in French and second in English. On the genuine battery the caution is printed first in English and second in French. Again... the "tip" after you pick the image you think is the fake describes the flaws which are identified on the battery that the quiz claims is the genuine battery.
You might want to have a more careful look at that quiz.
Tim Campbell
5D II, 5D III, 60Da

Checking Out MSI's N680GTX TwinFrozr III 2GD5/OC

Similar Messages

Maybe you are looking for