Checking Payload of WorkFlow Step in BPM

Hello All,
I was trying the scenario MessageSplit Using BPM
I am stuck at send Step after receiver determination ,I want to know what is the payload (input output)
after each workflow step in the BPM ,but i am unable to check .
Is there any way to check this. Basically i want to know how to check the i/o and o/p of the each workflow step.
Thanks in Advance
Rajesh

Hello Experts,
Could somebody guide me in this scenario as i am not able to carry on
I want to see the payload for BPM workFlow steps ,first of all is this possible ,if yes i am at step
container (list technical details) where the option payload is display but no data is found .
If no how can we check or monitor the BPM workflow step by step. I hope some body might have faced this problem ,could some BPM experts throw light on this.
Thanks in Advance
Rajesh

Similar Messages

Check condition in Loop step in BPM

Hi All,
Need urgent help... I have to specify the condition in loop in such away I need to receive and bundle IDOC1 till I get IDOC2. Please let me know how to specify the condtion in loop.
Thank you in advance
Regards,
Dhill.

HI
See the below link
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/michal.krawczyk2/blog/2005/12/04/xi-idoc-bundling--the-trick-with-the-occurance-change - IDOC bundling
Also we have Collection of messages based on the message a pattern in SAP BASIS see the BpmPatternCollectMessage and check for correct IP config..
Regards
Chilla

Checking condition in switch step of BPM

hi all,
i am doing an 1to1 transformation where: i am converting my source into a target. the target has
header 1
lineitem 1..unbouneded.
lets say there are three line items:
header1
lineitem
lineitem
lineitem
i am using a send step where i am sending this target msg to a switch step. in the switch step i am checking for a condition.i am checking for the occurence of a field in the line item. but when specifying in the condition editor, it allows only to choose from the root of the structure. how can i check the ocuurence of a particuler field for the lineitem alone??
is there a way to to do it??
Any help will be greatly appreciated.
Thanks

Hello,
This is the condition i have currently given: but if i have 2 or more lineitems in the incoming msg does this condition also check for :
MI_DOC./p1:SRC_ROOT.lineitem/itemfield2 EX
MI_DOC./p1:SRC_ROOT.lineitem/itemfield3 EX
etc...
and in one of the line item the field may EX and some it does`nt. when it doesn`t i am cancelling the process, if the field EX then it is sent to further processing.so if i have 3 lineitems in which two of the line items the field EX and in the other one the field does the EX, are the msgs split accordingly??
Message was edited by: Aarthi R

Check payload for a BPM scenario

Hi,
When testing a BPM scenario (BpmPatternCollectMessage) I got error in Transformation step.
I want to collect payload (source message) in transformation step so that I can test in Message mapping
I know we can monitor BPM in sxmb_moni_bpe. But from that Tcode I can not collect payload (reply to me if I am wrong).
I check sxmb_moni but no use...
Looking for responses...
Regards,
Pradeep A.

Hi Prateek / sunil,
thank you for your reply,
I send olny one message before stop message, then also i got an error in transformation step.
But when i copy the same message from payload and test in message mapping then it is successful. I thought that source message is converted in to another format when it reach to transformation step.
so i want to collect the input message of the transformation step.
>>>>Don't say that.
>>>>Thats the place where you will get the payload. What's the problem there?
so i check sxmb_moni for that stopmessage bec i got redflag in moni under outbound status column.
when double click on stop message --> i notice two pipe line steps inside 1) Central Client 001 2) PE_ADAPTER Client 001
i check payload of all pipeline steps (Central Client, PE_ADAPTER )and notice that same payload exists at every step.
please guide me if i am doing any wrong
1) where can i collect input message of the transformation step.
2) if i copy sap provided BPM and Message mapping form Basis SWC to My SWC, then my i got error in transformation step
3) I copied payload from message mapping and test from RWB keeping ID as constant and changing over all number for every message i send.
regards,
Pradeep A.
Edited by: PRADEEP AMISAGADDA on Sep 23, 2009 12:42 PM

Problem with Switch Step in BPM

Hi,
I am using Switch Step in BPM, to check a condition. I created following condition (App_Resp./p1:App_Resp_MT/Response = true). The mentioned is correct and it should succeed but it is failing. Its going thru OTHERWISE branch. Can anybody help me to solve this out?
Thanks,
Yaseen.

HI,
I checked in the workflow the xml file generated contains value 'true'.
Its not multiline and looks xpath reflects for the changes made.
I think it may be problem that needs to deploy any OSS notes.
Please throw some idea.
Thanks,
Yaseen.

Expression must return the interface type in Transformation Step in BPM

hi,
We are getting below while activating the IP,
Expression must return the interface type SI_Send_AA
Expression must return the interface type SI_Get_AA
No semantic errors found
We have a Transformation Step in BPM,
In OM, Source is SI_Send_AA and Target is SI_Get_AA
Also Container variable points to the same Abstract SI's.
Few Thread's for Same are error are:
Error in BPM
expression must return the interface type
Transformation step in ccBPM scenario
Error while compiling Business Process
Even after checking these i am getting this Exception.
Please Help!
Thanks,
Mayank

Also Container variable points to the same Abstract SI's
Are you sure that you are using Abstract Message Interfaces only and that these are referring to relevant container variables.
Normally it happens that there is some mis-match between the message types/ interfaces that we use in the mapping and that we use in the BPM.
If still not solved, then delete the Transformation step --> save --> activate......then again Edit the BPM to include the Transformation Step.
Regards,
Abhishek.

Multiple source messages in transformation step in bpm

Hello,
I am using a transformation step in bpm, I have two source messages and 1 target message, I got an error 'expression must return the interface type XXXX(in source message)', I checked my source message in interface mapping and the container element, the types do match.
All the interfaces in the OM as well as in the bpm container definition are of type abstract.
It seems to have something to do with the interfaces belonging to different software components?
I declared a usage dependency from one swcv (holding the bpm) to another (holding the abstract interfaces which cause the error in the transformation step), so that I can reference them in the bpm.
I thought it might have something to do on how the message interfaces are selected in the operation mapping. so I tried to select the messages through the depencency path, but that was of no help either.
Have I been clear?
Any ideas?
Thanks
Matthias

Since no receiver information is available in the transformation step, there can be no value mapping within the transformation step. If the messages to be transformed give values in different formats, for example different date formats, you must first normalize the values before the messages can be processed in the process. To do so, define a message mapping with a corresponding value mapping.
Check the help page below for reference
http://help.sap.com/saphelp_nwpi71/helpdata/en/27/db283fd0ca8443e10000000a114084/content.htm

Workflow step not executed...

Hi,
In my workflow requirement (for VA01), I want to record the status in a custom table as follows;
Approver id     date   time    status
ABC                                     Submitted for approval
ABC                                     Approved (or) Rejected
So I have created a step called 'update custom status' after the step that sends email to the approver agent whose details stored in another custom table. Then I associated a task with this step which is bound to a custom class / method which has the logic to write the status to the custom table.
The issue is I do not see this step excuted. I checked in the log.
What can be wrong ?
Workflow steps are as follows;
1. Read the document's net value and store in a variable.
2. Read the custom table for agents list to whom the doc has to be sent for approval.
3. Send email for approval.
4. update custom status.
In the graphical view, I can see the update custom status step being called (Green link from previous step to this step) but after that no progress.
Am I missing passing some values ? Or is this step not giving any results ? Whats happening ?
Details on this update custom status step are as follows;
A custom task with terminating event set as _WORKITEM defined. (not synchronous)
A step of type activity defined and bound to the above task with binding done.. (what values should I pass to record the above needed details.)
In other words, how can I record the status in my custom table ?
thnks

Hi
I think its a background step. If yes, then make it foreground and debug and see what is the problem. Also check for short dumps and turn on the event trace and see the terminating event is getting triggered.
Vinoth

Receiver Determination with Synchrnous Send step in BPM

Hi,
Is there any way to use BPM Receiver Determination step type with Synchronous send step ?
Is it possible to send a request to multiple receivers synchronously and capture the response?
Appreciate for your response.
Thanks,
Rao.Mallikarjuna

Use malticasting, check out these blogs
Multicasting using Receiver Determination Step in BPM
and pattern number 6 in BPM with Patterns explained Part-2
Thanks!

User Decision Step in BPM - PI 7.1

Hi All,
I have posted a wiki for User Decision step in BPM in PI 7.1, Please go through it and post your queries, suggestions and comments here.
The link for same is under:
Part1 - https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/userDecisionstepinSAPPI7.1-Part+I
Part2 - https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/userDecisionstepinSAPPI7.1-Part+II
Regards,
Sachin

Hi Sachin,
Nice job,
During my practice on this scenario. I have got an error please kindly guide me on this, may this error also clear for the others
*I got an error on SXI_MONITOR as:*
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
The trace of the error as:
<Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_BPE-ENTER_PLSRV">
<Trace level="1" type="T">could not create BPE proxy for message, no XML object definition found for message 72485F6BFC78416A29EEE3EE10D09BCE</Trace>
</Trace>
</Trace>
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
Please kindly guide me on this, Is the message has to validate at sender agreement? if not where is the error I am doing?

Need Help on User decision step in BPM

Hi All,
I have a requirement to design the user to to system interaction in a partiular scenario. I am trying to use the User decision step in BPM available in PI 7.1 server. I have used the User decision step and filled all the parametes as given in the sap documentation. When I am trying to execute the scenario, The outbound process is succesful but stops at the BPM workflow at the User decision step with the message (No Agent ready) .
Can anybody help me in solving this issue.
Thanks in advance,
Kalpana

Hi Shabarish and Swarup,
I have defined the relevant user in the Integration directory , also made sure that the user entered is defined on the integration server and there are not restrictions on the defined user. The workflow log is as follows:
Workflow              File2File_BPM1
Workflow instance     File2File_BPM1 http://File2File_BPMdemo
Instance number       000000001046
Start date            30.12.2008     Started by            WF-BATCH
Start time            11:33:36       Current status        In Process
View: Workflow chronicle
Error       St Task                                          Result                                   Date       Time     Processing time
Error Agent                     Executed Action                          Date       Time     Object               Object Name                    Object 2             Object name 2                  User Context
File2File_BPM1 http://File2File_BPMdemo       Workflow started                         30.12.2008 11:33:36               -1s
WF-BATCH                  Start message received                   30.12.2008 11:33:36 MIAB_BPM_OB2 / http: C532A7AB4D284B9011C0B0C7F8AFB                                                      WF-BATCH
WF-BATCH                  Workflow started                         30.12.2008 11:33:36                                                                                WF-BATCH
WF-BATCH                  Events Dispatcher Active                 30.12.2008 11:45:36 MIAB_BPM_OB2 / http: 597B946347C148AD03988B5D8BE2C                                                      WF-BATCH
WF-BATCH                  Events Dispatcher Active                 30.12.2008 11:45:37 MIAB_BPM_OB1 / http: 6E0E09EE977E4F333D02DDDAE9A52                                                      WF-BATCH
WF-BATCH                  Events Dispatcher Active                 30.12.2008 13:48:07 MIAB_BPM_OB2 / http: 9F5491FD9BC642E50486A6FED89DA                                                      WF-BATCH
WF-BATCH                  Events Dispatcher Active                 30.12.2008 13:48:07 MIAB_BPM_OB1 / http: 1AE5BB06D72341AD01F8C45E6AA7E                                                      WF-BATCH
WF-BATCH                  Events Dispatcher Active                 02.01.2009 05:34:58 MIAB_BPM_OB2 / http: CD698CDE5606436811BAB330011AF                                                      WF-BATCH
WF-BATCH                  Events Dispatcher Active                 02.01.2009 05:34:59 MIAB_BPM_OB1 / http: 2D82C00C16E0447F1DF3B133470AD                                                      WF-BATCH
'Good'{TYPE=SWFXST_STRING}'BAD'{TYPE=SWFXST                                           30.12.2008 11:33:37                0s         1046
WF-BATCH                  Dialog work item created                 30.12.2008 11:33:37                                                                                WF-BATCH
WF-BATCH                    EVALUATE_AGENT_VIA_EXPESSION           30.12.2008 11:33:37                                                                                WF-BATCH
I hope this can help you in identifying the error.
Thank you,
Kalpana

Url link in User Decision workflow step

Hi Experts,
I had created a workflow for "Employee transfer" process using SWDD tcode.
I had a created a workflow step with type as "User Decision".I had included "Approve" & "Reject" decision options.
Now i want to include URL link along with "Approve" & "Reject" in the user decision workflow step (i.e) The manager needs to see the URL link along with "Approve" & "Reject" in his SAP workflow inbox.
Can anyone guide me...
Regards,
Krishna Balaji T

Hi Krishna,
I understand your issue. I have faced a similar issue in my project.
Here is the solution!
To add link of a URL you need to have the binding with the BO of the transaction your are refering to. To do this, you need to bind your BO event (triggering event) to the workflow container and then the workflow container to task container. This BO value should flow from event-> workflow -> task container to get the link in the User Decision.
To do the binding you need to follow the following steps:
1. Go to t-code SWDD and open your workflow template.
2. Go to Basic Data (cap sign button at the top of the screen) or click Ctrl + F8
3. Go to Start Events tab.
4. In the Object type enter your BO name (BO for the transaction you need to add as link), in Event of object enter the BO event. This would serve as the triggering event for your workflow.
5. Click on 'B' i.e. Binding Defined, click on generate automatic binding. It would automatically generate the appropriate binding for the workflow. You can also alter the binding as per requirement. This binding would ensure that the URL comes under 'objects and attachments' section.
6. Click on 'C' i.e. Start Condition. A dialog would open, select the appropriate start condition for the workflow. Check the condition before saving (recommended).
6. Click on 'A' to Activate the binding and start condition. All 'A', 'B' and 'C' would get green.
7. Save the changes made and activate your workflow.
8. Do the binding between the workflow and the user decision step. Select automatic binding (recommended).
You can also refer to the similar thread that I had provided solution to. This would help you resolve the issue!
Re: URL of site has to be attached along with the mail
Hope this helps!
Regards,
Saumya

Workflow Step stays "In Process"

Hi Experts,
I have a workflow step which refers to a standard task. The step type indicates "Processing completion by event"
The related standard BO event is already completed, but this step is still 'In Process'. Probably the terminating event is not captured in the WF step.
Please suggest how to set this workflow step to completed status so that it moves on. (Is it advisable to re-create the BO event manually through SWUE)
Thanks in advance!
Ali

Thanks Paul.
-Checked in SWEL, the terminating event is not issued
- No dump found in ST22
Please suggest how to set this workflow step to completed status so that it moves on. (Is it advisable to re-create the BO event manually through SWUE)
Thanks in advance!
~Ali~

ABAP proxy in Block step in BPM

Hi Experts,
Can ABAP server proxy be used in the block step of BPM?
Proxy cannot be generated using Abstract interfaces right?
Thanks
Suma S

Hi Suma,
Check the below links :-
As far as my knowledge, you cannot use ABAP proxies in the block step.However, you can cross check it.
Yes, you are right . You cannot create proxies from abstract interfaces.
Check the below links. These will help u in better understanding :-
http://help.sap.com/saphelp_nw04/helpdata/en/f6/e1283f2bbad036e10000000a114084/content.htm
bpm send abap proxy problem
Re: what is a block step where it is used
What is the use of block step in BPM? Please help!
Regards,
Rohit

Custom pages at each workflow step in UCM

How can I link custom pages (say JSP pages) with a workflow step in UCM? Suppose I've a workflow with a reviewer and approver and I want to get some field values at each step, how can I do so? Currently, the only option I get is Approve/Reject links at each step.

so suppose you create an HCST page (see Bex's book if any of you reading aren't sure what those are) and check it into the content server.
You will need to reference it from the workflow in queue page or the emails that get sent out to the step reviewers (or both).
I suspect that in addition to calling the page (via URL) you would also pass some information on the URL like the content ID of the item being reviewed in workflow, the workflow step, etc. That information will be available already on the page you are navigating from.
Then your hcst looks and functions like any other template page. It has the information from the URL params that it can use as inputs for additional queries or services that you're executing. There are some examples of basic HCSTs in the book and in the Dynamic Server Pages guide here:
http://download-west.oracle.com/docs/cd/E10316_01/cs/cs_doc_10/documentation/developer/dynamic_server_pages_10en.pdf

Checking Payload of WorkFlow Step in BPM

Similar Messages

Maybe you are looking for