Checking source system

Hai,
I am seriouslu suffering from a problem with my source system. I am not able to connect to load data, transfer structure not getting activated. Can some body please tell me all the ways I could check a source system, infosource and datasource.
I know the following:
1. AWB>source system> (rt.click on sourcesystem)> check
How can I check on both BW and R/3ides?
Any help is highly appreciated.
thanks a lot.

Hi,
Please follow the steps,
1) TransactionSM59 --> Run the RFC destination for your R3 system and it should show 'success' message. Check with Basis team
2) Transaction RSA1 --> Tools --> Mapping of the source system names & Assignment of source system to source system ID.
Please make sure this settings are made and test the data load.
Thank you
Arun

Similar Messages

How to Check source systems in RSA1 and verify that connections are working

How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................

Hi,
In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
Regards
Vinod

Error RSAR 371 when checking source system in BI

This was mentioned in 1 forum but not really answered to my understanding.
Message - BI IDOC type ZSBB003 not the same as source system IDOC type ZSBC005
RSAR 371
This is when checking a source system from BI 7.0 to ECC 6.0 after a refresh and running BDLS with many patches.
thanks

Hi Bradley,
I believe you have to run BDLS using option 1 - Conversion of Client Dependent and Client-Independent Tables. This is to ensure that you have a correct conversion to a new logical system.
You can refer to these notes too:
886102, 184754, 325470
These notes help but rather confusing to read it at first. Hope this helps.
Regards,
Andrew

Function module to check source system

Hello
Can some one help me by providing the name of the function module to check the Source system connection?
I know that in the source system we can right click and check.
But i want to know the function module to check the status.
Thanks in advance
Kind regards
M.A
Edited by: M.A on Aug 19, 2008 12:42 PM

Hi shasank,
Thanks for the info.
I had given the tech name of the source system as an input to the function module.
But it raises an exception that destination does not exists.
But the source system connection is ok.
Regards
M.A

While loading data from r/3 to bw error 8 /error in source system is coming

while loading data from r/3 to bw error 8 /error in source system is coming . how can i solve this problem .

Check source system connectivity.
Tcode RSA1 --> Source System RClick --> 'Check'

Source system connection problem in BI

Hi ,
While checking source system connection we are getting below error
" BI IDoc type ZSBP055 is not the same as source system IDoc type ZSBP120"
could please guide on this .
Regards
vamsi

Hi ,
Please check with basis or if you can ,then try to restore the source system in BI/BW.This should correct the inconsistencies between the two systems which is being caused by different Idoc types
Also check the table RSBASIDOC in the BI system and compare this to R/3 system ,the "basic type" field should be same.
A restore should work,it has always worked for me.
Regards
Amit

SAP BI tables / FM's to get datasource details of source system in BW system

Hi All,
Is it possible to trace the Datasource details of source system in BW system. For example if there a ECC Datasource 0FI_XX_XX, then is it possible to find below details in BW using some RFC FM's ot tables
1) If there is any enhancements for the Datasource
2)What is the name of extract sturcture and name of the enhancement.
3) Is it possible to get code written for that Datasource enhancement
Please let me know.
Thank You.
CPG

Hi,
Might be possible by using RFC. But you may face issues.
Because enhancement code is based on ecc fields. those won't be compatible at bw side.
Actually why you need to ecc details at bw side?
All below points need to check source system side.
1. You can check at CMOD, by using standard exits. or
at SE38. ZXRSAU01/02/03 depend on data source type you can use program and search for your data source you may know the code if your data source was enhanced by using cmod.
2.Data source extract structure name you can get from source system, RSA6, double click on your data source, open next screen you may see it. There is no specific name for enhancement. but all enhancement components under RSAP0001.
3. Yes, you can check program ZXRSAU01 - transaction data source, once you open thi program, you can search for your data source, you may see the relevant code for your data source enhancement.
As my guess your data source is transaction data source.
Thanks

Source system extraction job not starting

Hi,
I transported a CS,TR,UR from Development to Quality system and it worked fine.
Then i moved from Quality system to Test system .
Transports were successful.
I see UP,TR,CS in active state.
I checked the source system mapping and it is perfect.
I checked source system connection and its OK
I scheduled a IP from BI and the job did nt started any job in source system?
Request you to help me on this.

Are you scheduling the job in the foreground/Background.?.
Please schedule in foreground.
Once you are scheduling the info package go to monitor tab
and see how many records it is fetching.
Also make sure you have a immediate scheduling option.
Thanks,
Saveen Kumar

How to check data records in R/3 (source system)

Hello,
I need to check the data records in R/3 (source system). Is Transaction RSA3 the only option or is there another way. When I use RSA3, all I see is the sandbox and cursor. Nothing seems to happen.
Pls help.
SD

Hi Sebastian,
To some extent this works out i.e Comparision of Tables in R/3 Vs ODS at BIW.
Tables in R/3 like VBAK(Order),VBRK(Billing),MKPF(inventory Management) and LIKP(Delivery)
compare them with the respective Datasource/PSA/ODS
2LIS_11_VAITM
2LIS_12_VCITM
2LIS_13_VDHDR
2LIS_03_BF
in the BIW.
The Total numbers of Document Numbers ,Quantity or Value should match !!!!!!!!
Hope it helps !!
Rgds
SVU123
Edited by: svu123 on Mar 3, 2009 1:16 PM

Check on source system failing

My info package is failing
When i check the connection with my source system it says
"Result of the destination check:Password logon no longer possible - too many failed attempts"
How can this be fixed??

Hi,
This problem comes whenever the background user password changes or resets, so contact Ur basis Team for restoring the connection
The password for ALEREMOTE has been locked
Try to Schedule Info Package once the password has been reset. It will be successful.
T.codes : SM59 Source system Connection
RSCUSTV* * 1,2,3,4,5,6,7 Back ground user ID Setup
Regards
Hari

R/3 Source System Check in BW

Hi ,
We had a BW client Copy from Production to QA and DEV system. Last week, When I am trying to restore source system connection to R/3 after client copy by creating PORT and PARTNERPROFILES in BW system. I could restore connection in BW Dev but not in QA.When I tried to check the source system in RSA1 then I am getting an error that USER IS LOCKED. The remote logon test is going sucessful and when I replicate I could replicate every thing successful. I checked the user(ALEREMOTE) in R/3 and the status of the user is not locked.
Thanks in Advance,
Varma.

Hi,
Did you check the ALEREMOTE in your BW QA? The best to test out is to go into SM59 of both the system (BW and R3) and try the logon.
Hope this helps,
Cheers,
Gimmo

How to check how many source systems are connected to my BW system?

Hi friends
how to check how many source systems are connected to my BW system?
Regards
BN

Hi All,
Thanks a lot for your help. its resolved now with your help.
Regards
BN

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

Source system (R/3) error while testing from BW

Hi,
We are trying to test the source system from BW. We have defined LOGICAL system in R/3 as well as in BW. We have also checked in sm59 for RFC tests and found to be successful in R/3 side as well as BW side. Bur when we tried to activate the R/3 source system in BW side,w e are getting the following errors. Please help urgently.
1.The following errors occured in source system - RSAR -374
2.Result of the destination check: Timed out - RSAR -375.
Thanks,
David

Have a look at this:
Problem Activating Source system RSAR 374, RSAR 375
Regards.

Checking source system

Similar Messages

Maybe you are looking for