Checking the ADF version on EBS environment

How to check the ADF version on an EBS environment for 12.2 branch

Not sure if this is what you are looking for as I don't know too much about ESB, but you can try Terre web service I developed here http://wp.me/pcBZk-eI
Timo

Similar Messages

  • How to check the verity version in our PeopleSoft Installation?

    How to check the verity version in our PeopleSoft Installation? I am not sure if the verity is installed or not and also if installed what is the version?

    yes. it says the version is 5.0.1
    Is there any difference in installation or configuration when the app and web server are in same machine and when the app and web server are installed in different servers?
    ============================================
    D:\fs840\webserv\peoplesoft>mkvdk
    mkvdk - Verity, Inc. Version 5.0.1 (_nti40, Jul 23 2004)
    Usage: mkvdk [<option>...] <filespec>...
    Where <option> can be a VDK switch, or any of:
    -about Show the collection's about resources
    -autodel Delete bulk insert file when no longer needed
    -backup <dir> Specify collection backup location
    -bulk Submit bulk insert file(s)
    -charmap <name> Specify the character map to VDK
    -collection <path> Specify the collection (required)
    -create Create the collection
    -credentials <user> Specify user[:passwd][:domain][:mailbox]
    -datapath <path> Specify VDK datapath
    -datefmt <fmt> Specify date format to VDK
    -debug Enable debugging output
    -delete Delete documents
    -description <desc> Set the collection's description
    -diskcache <num> Set VDK's disk cache size (kbytes)
    -extract Extract field values from text
    -help Print this usage information
    -insert Insert documents (default)
    -locale <locale> Specify the locale to VDK
    -logfile <file> Save output in a log file
    -loglevel <num> Set the VDK output level for the log
    -mailboxes This option is depracated. Use the credentials option inste
    ad
    -maxfiles <num> Set VDK's maximum number of open files
    -maxmemory <num> Set VDK's maximum memory usage (kbytes)
    -mode <mode> Set the indexing mode
    -modify Modify fields using field/value pairs from a bulkfile
    -nohousekeep Disable housekeeping
    -noindex Disable indexing
    -nolock Turns off locking (dangerous)
    -nooptimize Disable optimizations
    -nosave Don't save collection work list
    -noservice Prevents servicing of submitted work
    -nosubmit Don't submit work to VDK
    -numdocs <num> Number of documents to insert from bulk insert file(s)
    -numpages <num> Synonym for diskcache for backward compatibility
    -offset <num> Specify offset into bulk insert file(s)
    -online Flag for online Bulk Modify
    -optimize <spec> Optimize the collection
    -outlevel <num> Set the VDK output level
    -persist Service the collection forever
    -purge Remove all documents from collection
    -purgeback Purge in the background
    -purgewait <secs> Specify delay before purge
    -quiet Suppress all non-error messages
    -repair Repair the collection
    -servlev <spec> Advanced option for overriding service level
    -sleeptime <secs> Interval between service calls for persist
    -style <dir> Specify style directory for create
    -submit Synonym for noservice for backward compatibility
    -synch Perform work synchronously
    -topicset <path> Specify VDK topic set
    -update Update documents
    -vdkhome <path> Specify VDK home
    -verbose Output more information
    -words Build word assist list
    -wordindex Build word assist index
    The <spec> for -optimize is a hyphenated string of:
    maxmerge Perform maximal merging of partitions
    squeeze Recover space from deleted documents
    vdbopt Build optimized VDB's
    spanword Create word list spanning all partitions
    ngramindex Create ngram index into spanning word list
    maxclean Really clean (not for read-write)
    readonly Make the collection read-only
    tuneup Fully optimize for read-write use
    publish Fully optimize for read-only use
    The <spec> for -servlev is a hyphenated string of:
    search Enable search and retrieval
    insert Enable adding and updating documents
    optimize Enable opportunistic collection optimization
    assist Enable building of word list
    housekeep Enable housekeeping of unneeded files
    delete Enable document deletion
    backup Enable backup
    purge Enable background purging
    repair Enable collection repair
    dataprep Same as search-index-optimize-assist-housekeep
    index Same as insert-delete
    Error: must specify collection
    mkvdk done
    D:\fs840\webserv\peoplesoft>

  • How to check the JDK version of a compiled java file

    can anybody tell me how to check the JDK version of a compiled java file ?
    Edited by: gbhatia8 on Sep 9, 2010 7:04 AM

    The major/minor version of the class file is the way to go.
    Also, it's not necessary to write a separate program to get to those. javap prints them out when being passed the -v flag.
    Note, however that "JDK version" is not a correct term, as I can create 1.4-compatible class files with a Java 6 JDK (by passing the -target flag to javac). Those won't look any different than .class files written with a 1.4 JDK.

  • Error(12,61): Parse of component type files failed, check the adf-config

    I got this error when i wanted to deploy CreditCardValidation
    Error(12,61): Parse of component type files failed, check the adf-config.xml file : "java.lang.reflect.InvocationTargetException"

    I got this error when i wanted to deploy CreditCardValidation
    Error(12,61): Parse of component type files failed, check the adf-config.xml file : "java.lang.reflect.InvocationTargetException"

  • How to check the firmware version of my MSI DR8-A

    Hi guys,
    How do I check the firmware version of my DVD writer MSI DR8-A ?
    I just bought this DVD writer, burned a DVD using a Melody DVD disc.
    And have problem reading it.
    Does it have anything to do with the firmware version?
    Is there a list of recommended DVD disc to be used with this burner ?
    Thanks a lot !!!

    Click Start, then Run and then type msinfo32.
    When the box pops up it'll have the options for your listed components. Open this tree and find your DVD-RW. To the right it will list your firmware for this drive.
    I do not know of any problems with these drives and certain media, but then again I haven't used any yet as I've only just got the drive. Don't scare me.

  • How to check the firmware version of my DR8?

    Hi,
    How to check the firmware version of my DR8?

    Go to:
    http://www.cdspeed2000.com/
    to get the software Nero CD-DVD Speed V2.11.  

  • Check the program version..

    Hi All.
    I must compare object versions of DEV with PRD.
    The number of object is about 150 including programs, tables and etc.
    I only want to know that the Request number for the activated version between two systems is same or not.
    How to do it?
    If you have a program or a SQL, give to me.. please...
    Thank you in advance.
    Best Regards.
    kil-nam.
    Message was edited by: Kil-Nam Kim

    hi kim ,
    u hav a version management for the object in versions --version management .
    now open transaction se03 transport organizer tools .
    give the request number of the same in ur DEV server.
    now open se03 in SE03 in PRD server.
    giv the request no in here and check it .
    this will give u teh match whether activated version is same or not.
    u can use SE01 also , but se03 is user friendly.
    second alternative is
    goto table E071 and execute .
    in here u giv the object name in the select options this will giv u all the include objects /dependent objects which is present .
    so u can compare the same with PRD and DEV.
    also check tables E070 etc ..
    regards,
    vijay.

  • How to check the OLite version and isntalled patches?!

    Hi,
    A couple of months ago we installed the consolidated patch 9535503 in the Mobile Server version (10.3.0.2.0). All the clients (WIN32) were supossed to make a synchronization with mSync.exe and install the patch when exit the sync (similar to first installation)
    There is now a client which faces the same bug (or this looks like) and i don't know how to check if it is possible to check if the above patch has been installed in the client or not.
    Any idea?
    Thanks in advance...
    Tomeu

    the device manager should be running, if not start it up. the client version should be on the main display screen, and you can see the individual component versions in file>version
    If it is patches you are looking for, open the polite.ini file and there should be a section at the end [DMC.UPDATE] that should show the installed patches

  • Regarding checking the objects versions after transporting

    Hi
    we are doing transportation from DEV to  QAS. what we have done is
    we have collected all master data objects,data sorses,transformations,dtps,process chains into different transport recquests and releases the recquests ,and imported recq in QAS.
    now our recq is to check whether all master data objects,data sorses,transformations,dtps,process chains are transported or not
    if transported have to check all obj are in active version or not.
    at present we are follwing below procedure
    a) go to se09 in DEV and select 1 recq and check the objects list under that recq then copy one obj and check in QAS,the same procedure for all objects, but we are having 100 recquests, under each recq we are having many objects.
    if we follow that it wil take days,so is there any procedure to check
    are there any tables where we can check fast and minimise the time.

    am not sure about the object status however can get list of objects in your transports from below process :
    Go to table E071 and give your request numbers as input. It will give you list of all the objects contained in those requests.
    Now object will be of different types , IOBJ - Infoobjects , ODSO - ODS , MPRO - Multiprovider , TRFN - Transformation etc.

  • Did anyone stop to think 10.10 is the same as 10.1 so the updaters that check the OS version will not allow updates ?

    Just tred to install anti-virus on the new 10.10 OS and low and behold it see it as 10.1, no surprise there, and will not let me install. Seem most of my installers will not do to the need to be 10.6 or later. This would be funny if it was not costing me all of this time.

    10.10 is not the same as 10.1 and a properly coded installer should recognize that.
    Check if the versions of the software are up to date. Old versions might cause problems anyway.

  • I check the firmware version on my BT Home Hub

    So the other day HH4 (Type A) received a new firmware check HH fw ....but I have a wired hub as an extention to overcome WiFi deadzone. I have now swapped the extention to be the Master (as when in slave is not connected to interwebs & won't receive fw updates), this (used to be extention) is the same model/type but is 2nd hand, not like the other updated hub which I received from ISP (BT). 
    My question is; It's been about a week now & still no update to the fw so do BT not issue updates to hubs that are not registered with them? (or s'thing)
    Solved!
    Go to Solution.

    I received a new hub after my original one broke due to the WPS button breaking and it has updated the firmware after a week or so. 
    Seems their must be a database of routers issued or I had a dodgy 2nd hand one? 

  • Checking the Sprint Version?

    I'm just double checking that I'm looking at the right info.
    If I have the most updated set of tools, I'm running spring v23 correct?
    Thanks

    Bob, one last question:
    Is the viewer number and the sprint number the same?  i.e. viewer v 23  = sprint 24 or spint 23?
    Thanks!

  • If you can't chat, check the iChat version first

    Finally after dozens of hours fiddling with firewall & airport settings, reconfiguring my ADSL modem (including having to borrow a PC laptop), scouring the forums, learning Ralph Johns's pages off by heart, establishing jabber accounts, etc, etc, I discovered the problem: for some unknown reason iChat had never been updated by Software Update and was still on 3.0. A quick download and install of the 10.4.3 update combo and all was solved.
    If by any chance some other poor sufferer has been victim of the same anomaly, please let me know - it would be some compensation.
    Apple - please make **** sure in future that updates can't be confused...

    Hi Andrew,
    The problem I have had with SIP and port 5060 is that I had a small group of people that I could get to when it was still bound and a a similar sized group of intermittent contacts and a larger group that I could not contact at all.
    ibosie on another dicussion board help me find the then 4.2.3 firmware that gave me UPnP AND the instructions for unbinding SIP from port 5060. I did not use UPnP at that stage because I was the only computer using the modem. The Unbinding of Port 5060 ws the key.
    I have seen posts here where people with a small number of succesful Buddies have been using iChat 2. in Panther then found they can not get iChat to work until they have done the unbinding when they upgrade to Tiger and iChat 3
    IF he does not do the unbinding it is likely he will have some successful contacts and some that are not.
    Yes UPnP should work ...it does on mine... If all the other things are sorted.
    At no point have Defcom and I suggested that he change from using UPnP. What we have said is that this modem is SIP aware (which is an Internet protocol standard on port 5060) and that it will need SIP to be unbound for the greatest succsss.
    Ralph

  • How to check the Business Package version in portal

    Hi All,
    I need information on business package version which is running in portal. after the business package deployed in portal then we could see the content in portal content->content provided by SAP folder.
    Recently we upgraded the Busiess Package of XRPM from 4.5 to 5.0  in portal, now i wanted to see what the content currently running in Portal whether it is Business Package of 4.5 or 5.0 version??
    Please let me know where could we check the BP version which is running in portal??
    Please get back to me with your inputs
    Thanks in advance
    Regards
    PortalUser100

    Hello,
    Please look in the http://HOST:PORT/index.html here you can find the link for the portal information. then click on system information >> component information. here you can find the all the deployed content running in the portal.
    Best Regards,
    Arun Jaiswal

  • SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

    Hello, 
    Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
    The prerequisites are failing and it is stating the following ; 
    Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
    Data Warehouse  SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
    The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
    All other pre-upgrade tasks have been done. 
    Help appreciated! 

    I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
    I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
    I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
    So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
    service can not be reached.
    [10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
    [10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
    at System.Management.ManagementScope.InitializeGuts(Object o)
    at System.Management.ManagementScope.Initialize()
    at System.Management.ManagementObjectSearcher.Initialize()
    at System.Management.ManagementObjectSearcher.Get()
    at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
    [10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
    [10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
    [10:29:11]: Debug: :**************************************************
    [10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
    [10:29:11]: Error: :
    [10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
    [10:29:11]: Error: :
    [10:29:11]: Debug: :**************************************************
    [10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
    [10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
    at System.Management.ManagementScope.InitializeGuts(Object o)
    at System.Management.ManagementScope.Initialize()
    at System.Management.ManagementObjectSearcher.Initialize()
    at System.Management.ManagementObjectSearcher.Get()
    at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
    [10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
    [10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
    [10:29:33]: Debug: :**************************************************
    So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
    Let's hope this fixes your issue as well, Tubble.
    Have a great day!

Maybe you are looking for