Checking time machine backups with a new external hard drive

Is there a way to make sure that my backups are complete looking at time machine? All I see is the front page for each backup and dont see how to open it and look at the files that were backed up? I have a new LaCie ext hard drive that Im using and want to make sure it is working properly. Also, do I need to change my sleep settings to allow Time Machine to have adequate time to back up, or does it take care of everything?

Cumby wrote:
Is there a way to make sure that my backups are complete looking at time machine? All I see is the front page for each backup and dont see how to open it and look at the files that were backed up?
Are you going into Time Machine from your desktop? If so, TM will show only the desktop in your backups. Try starting from a Finder window of, say, your home folder, then go into Time Machine. You should be able to select a backup and navigate within it just as you would normally, and see the complete "snapshot" of everything that was there at the time of the backup you selected.
Separately, Click here to download the TimeTracker app. It shows most of the files actually saved by TM for each backup (excluding some hidden/system files, etc.).
I have a new LaCie ext hard drive that Im using and want to make sure it is working properly. Also, do I need to change my sleep settings to allow Time Machine to have adequate time to back up, or does it take care of everything?
TM will do all that for you. If your Mac falls asleep, TM will just do a backup when it awakens. If you manually put it to sleep (or power off) while it's doing a backup, it will just pick-up and continue when it's awake again.

Similar Messages

How Can I Migrate My Time Machine Backups To A New External Hard Drive?

I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.

ivan wrote:
How Can I Migrate My Time Machine Backups To A New External Hard Drive?
I have a external hard drive that has 500 GBs left, but I want to buy a larger drive.
Hi iVain
Fire up *Disk Utility*, click the Restore tab, then drag your old and new TM drives into the Source and Destination fields. Click Restore, and a complete copy of your old TM files will be made on the new drive. Go to TM preferences and select the new drive, and it will continue backing up just as it left off.
Hope this answers your question. See:
http://discussions.apple.com/thread.jspa?threadID=2595485&tstart=0

Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion again?

Can I transfer a Time Machine backup to a new empty hard drive, without installing Mountain Lion on that new hard drive?

Yes - I just did it the other night. Took five hours, but it finally finished and is working great.
I sort of followed the instructions found here -->> http://pondini.org/TM/18.html.
Also, if you want to have dual backups, see -->>
http://pondini.org/TM/27.html.
I say 'sort of' because I used Carbon Copy Cloner to do a block-level transfer. I just didn't want to get hung up with a Finder copy.
Give CCC a try - you have to enable the block copy in Preferences before using this method, but I was quite happy with it. I used it to move over 1TB of TM backups from a FireWire 800 drive to a 2TB Thunderbolt drive. 5 seconds short of taking 5 hours.
It should work well for you.
Clinton

Time Machine backup? pictures and external hard drive

I know this question has been asked before but I just wanted to make sure of something. Does a basic Time Machine backup backup all photos? And also a real basic question-- Is a Apple Time Capsule the same as a external hard drive?

You can save the pictures in Time Machine backup.. that is not a problem and what the TC is designed for.
You cannot off load the pictures from the internal disk of the computer and use the Time Capsule as the drive for a running library.. that is when it will get corrupted.. if you need more space for a library use External drive that plugs in by USB or FW or Thunderbolt. And it must be formatted standard Mac OS extend journaled.. then Time Machine can backup the drive to the Time Capsule.
I should also use the language more carefully.. the TC is fine for files even of pictures.. but it is unsuitable for an iphoto library or aperture library. I am always assuming on a Mac when people talk about pictures then they mean a library.. but if you save raw pictures from the camera onto a TC directly that is fine. The only issue that then arises is no automated backups.. TC is not a NAS in the normal sense of the word.. Every NAS has a built automated backup.. TC does not. You also cannot backup files on the TC using TM.. it was designed as a Target for Time Machine backups Not as a source. There are other backup products that will work.. but then you will need to figure out where to back up file to.. and the worst possible place is the USB on the TC.

HT201250 Can Time Machine backup files stored on external hard drive

Can Time Machine back up files that are stored on external hard drive and save them on a different external hard drive?
I have my pictures stored on an external hard drive connected to my iMac. I want to make an exact copy of the pictures folder on a separate external hard drive. Can Time Machine do that?
If yes, how?
If no, what's a good way to create a mirror of the folder on External Hard Drive #1 (the original) on External Hard Drive #2 (the backup)?
I am not opposed to manually copying every couple weeks or month, but (1) it's less convenient and (2) I got an error message the first time I tried this saying the files couldn't be copied because some of the files being copied had the same name as each other (not exactly that, I'm at work and don't have the message in front of me right now, but that was the gist of it).
Thanks!

1. Yes, if both drives are formatted as Mac OS Extended (Journaled).
2. Reformat the drives if needed, open the Time Machine pane of System Preferences, and remove the drive with the pictures from the list of items set to be excluded.
(110331)

How can Time Machine backup automatically when your external hard drive isn't connected?

Everywhere I search, it says that Time Machine will automatically backup every 24 hours and so on.
However, I was wondering - how can these automatic backups take place if you are backing up to an external hard drive which is not always connected?
Is this to say that if you do not connect your external hard drive for a day, no backups will be done that day?
Thank you

If the drive is not connected then TM pauses until the drive becomes available. Yes, if the drive isn't connected then there are no backups.
A whole lot about Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.

HT201250 Time Machine backup of internal AND external hard drive

I have an iMac with an internal hard drive for everything BUT photos and music and an external hard drive for only photos and music. If I hook up a second external hard drive will Time MAchine back up both my external (music/photos) hard drive AND my internal hard drive?

You will be able to back up the external drive, but you will have to modify settings. Time Machine only makes backups of your OS X partition by default.
Open System Preferences > Time Machine > Options, and remove the external drive from excluded items, so it will be backed up. I recommend ot have your external drive formatted in "Mac OS Extended (Journaled)"

Time Machine Backup not possible (normal external Hard drive)

Hi,
has anyone else had the problem that after the Lion upgrade its not possible to even really access your external time machine?
i have a 1TB Samsung HD103SI Media and when it tries to boot up it wont show in finder, i can see it in the disk drive utility and try to repair it but it only gets me an error saying i have to reformat that drive?
i hope this can somehow be fixed otherwise all my backups are gone

Hi,
Sorry to hear about your Issue...
Was your Samsung Formatted to Mac OS Entended (journaled) when you first started using it with TM...?
If so see the Troubleshooting Section in this Link to Pondinis excellent Tips on Time Machine...
http://web.me.com/pondini/AppleTips/Index.html
Cheers,
You may also find the TM references in this Link of Interest...
http://web.me.com/pondini/AppleTips/LionChanges.html

Time Machine won't recognize new external hard drive

I recently had a problem with My Passport and had to buy a new one. I have plugged it in and reformatted it and now Time Machine won't recognize it even though it shows on my desktop and the disk utility doesn't see any problem. Any ideas?

Disable Time Machine from System Preferences.
Choose Select disk button, remove the old TM backup disk and add the new one.

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the b.u. stops

I am trying to do a full Time Machine Backup to a new external disk. The backup starts, and it says "Time remaining about 4 days." That seems like a very long time, but the real problem is that the computer "logs off" after a few hours, and the backup stops. The system preferences are set to "Never" for Computer sleep and Display sleep. The computer does not ordinarily log off automatically, but it has done this twice since I started the Time Machine backup.

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the word "Starting" (without the quotes) in the String Matching text field. You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard." Note the timestamp of the last such message. Clear the text field and scroll back in the log to that time. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
If all you see are messages that contain the word "Starting," you didn't clear the search box.
If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.

How does one SUCCESSFULLY transfer Time-Machine backup to a new (larger) hard disk drive using OSX 10.5.8

I have read a number of articles about how to transfer a complete Time-Machine backup to a new (larger) hard disk-drive. Some of these articles are specifically for OSX10.6 users, which are not applicable to me since I am operating with OSX 10.5.8.
However, I have tried several times to use the Disk Utility 'Restore' function, dragging my old time-machine volume into the 'Source:' box and my new volume into the 'Destination:' box. This works, of sorts, BUT the newly created volume on the new larger hard disk-drive remains the same size as the original volume on the old Time-Machine HDD, with no apparent way of increasing the new volume's size. So I am not really any better off:
E.g. the total capacity of my new HDD is stated by 'Disk Utility' to be 465.8 GB, of which I'm told 228.2 GB is used for the Backups.backdb folder, but only 4.6 GB of free space is actually available. Yet under the 'Partition' tab of 'Disk Utility' it tells me that there is still 236.4 GB of available space.
Does anyone know how to resolve this issue without upgrading to OSX 10.6?

First, how did you prepare your new drive? See:
Drive Preparation
1. Open Disk Utility in your Utilities folder. If you need to reformat your startup volume, then you must boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
If you plan to partition this new drive then be sure you create a larger partition for TM than your old volume.
Next, clone your old TM volume:
Clone using Restore Option of Disk Utility
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4.Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the Destination entry field.
6. Select the source volume from the left side list and drag it to the Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard

If i have Time Machine backed up on an external hard drive, do i just plug the drive into another macbook pro and all my stuff is in the new computer? Also, does it matter if the new computer is running Lion when the backed up info came from Snow Leopard 10.6.8?

No and Yes
Don't use TM for this purpose, clone your drive to an external, plug the external into another MBP and reboot from it. Please note that booting a machine that came with Lion may not be possible from a drive with Snow Leopard.

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

I have a time machine backup file on a USB hard drive. I bought a time capsule / airport extreme, flat 3TB. I wish to transfer the backup file from the usb hard drive to the time capsule hard drive. 10.6.8

Unfortunately, Time Machine backups that are stored on a drive that has been connected directly to a Mac are completely different than Time Machine backups that are stored on a Time Capsule.
Frankly, it is not worth the effort and trouble to try to transfer the old backups to the new Time Capsule.....my opinion....having done this in the past.
It is possible though, but I would not recommend it due to the complexity and downsides involved with this. To give you an idea of how to do this, check out this support article.
http://pondini.org/TM/18.html
Even if you transfer the "old" backups over to the Time Capsule successfully, Time Machine will not simply "add on" to the old backups.
Time Machine will make a new complete backup of your Mac and then add incremental backups from that point.
My advice.....start a new backup on the Time Capsule and move forward. Keep the USB hard drive around for a month, maybe 2 or 3 in case you need to go back to an old backup for some reason. At that time, you will not likely need the old backups at all since you will have a current 2-3 month history of new backups. At that point, you can erase the USB drive and use it for another purpose.

Time Machine says both of my external hard drives require reformatting to case insensitive. What do I do?

I have been successfuly using Time Machine to back my iMac to an external hard drive (via usb) and everything has been fine for the last year. I have been using TM to back up to a HD called Terra LaCie via usb.
A week ago, my iMac hard drive was full--so I spulrged and bought a 6 TB external hard drive (Western Digital My Book-Thunderbolt). I set up the new Thunderbold HD to use RAID 1 (mirror) and copied most of my iMac hard drive over to the Thunderbolt HD.
I kept my working photographs (most recent) on my iMac and felt good to know my older photographs are on my new Thunderbolt hard drive.
For a few days, Time Machine seemed to work fine (backing up my iMac to Terra LaCie HD. I haven't been concerned with backing up the Thunderbolt drive (as I feel that mirroring is same as backing up).
Yesterday, Time Machine indicated the lastest back-up failed (for the HD called Terra LaCie). Now, when I go into Time Machine, the dialog box indicates the following message:
"Are you sure you want to erase the backup disk “Terra Lacie”? Erasing will destroy all information on the disk and can’t be undone.
The disk must be erased before it can be used for Time Machine backups because a disk you are backing up is case sensitive, but the backup disk is not."
When I open Time Machine to look at my external hard drives (I also have a third usb portable drive); two of the three drives indicate the following:
"reformat required; case insensitive disk".
The small, portable hard drive (that I'm also using) doesn't say it needs to be reformated (but my new Thunderbolt and my old usb HD both indicate the same message (above).
What should I do? I just spent days transferring my photographs from my iMac to my new Thunderbolt. Should I just not use Time Machine any longer and work from my Thunderbolt drive?
Am I to understand that my iMac suddenly become case sensitive? Sorry if this was too much information about my hard-ware set-up.
Any help someone can provide me would be greatly appreciated. I suppose I need to understand Time Machine and perhaps my Thunderbolt better.

Hi BDAqua,
Bravo, you helped me solve my problem.
The Case Sensitive Disk was the small portable hard drive that I was using termporarily.
I just disconnected it and I started TM machine and everything seems to be working just fine.
Thank you very much!!!!

Checking time machine backups with a new external hard drive

Similar Messages

Maybe you are looking for