Checking what VI's are running on a cRIO
Good morning fellow LabVIEW developers,
I have been doing some research on launching multiple parallel VI's on a cRIO 9014 platform. In order to make my research substantially easier, I would like to know if there exists a method of easily checking which VI's are currently running on a cRIO. This software piece would be analogous to the Window's Task Manager we are all so familiar with.
Thank you for your time,
AMV
Hi DrAlexMV,
Have you tried to add the device manually by IP address? You can find more information about that here.
Jayme W.
Applications Engineer
National Instruments
Similar Messages
-
LMS 3.1 JRM Service could be down. Check whether JRM services are running.
Hi all
Jrm service is showing down in LMS 3.1.
When i select RME tab its showing the error " JRM Service could be down. Check whether JRM services are running."
I checked the services.But its running.
We have not changed the host name.
Pls find attached the lms service status as well.
If any one faced the same issue pls reply me at the earliest.
Thanks and regards
DanishBased on these services, this appears to be LMS 2.x, not 3.1. Post the output of the pdshow command.
Please support CSC Helps Haiti
https://supportforums.cisco.com/docs/DOC-8895
https://supportforums.cisco.com -
The update popped up, I clicked to install and it keeps popping up when I open Firefox that it cannot install because I need to check and see if other firefox copies are running. I do not know how to do that and why wouldn't firefox be able to tell if other copies are running and tell me how to delete them if that is what is necessary
Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* Firefox 4.0: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Do not remove personal data if you uninstall the current version.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox. -
How to check what oracle patches are installed
Hello,
I need to now what oracle patches are installed on different databases, how can achieve this?
Regards.Yep:
select ACTION_TIME,ACTION, VERSION,COMMENTS from sys.registry$history;
ACTION_TIME ACTION VERSION COMMENTS
25-JAN-09 07.06.05.665358 PM UPGRADE 10.2.0.4.0 Upgraded from 10.2.0.1.0
20-MAY-09 12.23.00.924500 AM APPLY 10.2.0.4 CPUJan2009
20-MAY-09 12.32.48.709814 AM CPU view recompilation
Regards.
Edited by: user6046340 on Jun 25, 2009 3:57 PM -
JRM Service could be down. Check whether JRM services are running
I keep seeing this message when ever I open RME
LMS 2.6 on A Windows 2003 platform
3.0.5 common services
4.0.6 campus manager
6.1.5 Ciscoview
2.0.6 DFM
2.6.0 IPM
4.0.5 RME
pdshow against CTMJrmServer - waiting to initialize, then it will become administratively shutdown
JRM and the other dependencies are up and working
Under CTMJrmServer.log - I keep seeing what looks like authentication errors
Error in execPOST: Server returned HTTP response code: 403 for URL: http://localhost:1741/CSCOnm/servlet/com.cisco.nm.cmf.servlet.SecretManagerServlet?command=put&alias=admin&secret=R2Dc7YpBXJLzlQ%3D%3D
1:11 GMT 2010 ],INFO ,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,217,Retrying 0
[ Wed Jan 13 10:31:21 GMT 2010 ],FATAL,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,207,Error during authentication:5,null
[ Wed Jan 13 10:31:21 GMT 2010 ],INFO ,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,217,Retrying 1
[ Wed Jan 13 10:31:31 GMT 2010 ],FATAL,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,207,Error during authentication:5,null
[ Wed Jan 13 10:31:31 GMT 2010 ],INFO ,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,217,Retrying 2
[ Wed Jan 13 10:31:41 GMT 2010 ],FATAL,[main],com.cisco.nm.rmeng.jrmwrapper.server.JobManagerExt,getJRM,234,Unable to obtain session. Terminating
[ Wed Jan 13 10:31:41 GMT 2010 ],ERROR,[main],com.cisco.nm.rmeng.jrmwrapper.server.CTMJobManagerServer,<init>,66,Null JRM. Exiting
Any help with this would be very much appreciated
Simonhostname - sm01ms002
C:\\>pdreg -l CTMJrmServer
Process = CTMJrmServer
Path = d:\\PROGRA~1\\CSCOpx\\bin\\cwjava.exe
Flags = -cw d:\\PROGRA~1\\CSCOpx -cw:jre lib/jre -cp:p MDC/tomcat/webapps/rme/WEB-INF/classes,MDC/tomcat/webapps/rme/WEB-INF/lib/ctm.jar,MDC/tomcat\/webapps/rme/WEB-INF/lib/log4j.jar com.cisco.nm.rmeng.jrmwrapper.server.CTMJobManagerServer sm01ms002
Startup = Started automatically at boot.
Dependencies = RMEDbMonitor jrm TomcatMonitor RMECSTMServer
\f1 NMSROOT=d:/PROGRA~1/CSCOpx\
PX_BINDIR=d:/PROGRA~1/CSCOpx/bin\
PX_CGIDIR=d:/PROGRA~1/CSCOpx/cgi-bin\
PX_LOGDIR=d:/PROGRA~1/CSCOpx/log\
PX_TMPDIR=d:/PROGRA~1/CSCOpx/temp\
PX_DATADIR=d:/PROGRA~1/CSCOpx/files\
PX_DOCDIR=d:/PROGRA~1/CSCOpx/htdocs\
PX_CLASSDIR=d:/PROGRA~1/CSCOpx/www/classpath\
PX_CGIURL=/cgi-bin\
PX_DOCURL=/\
PX_CLASSURL=/CSCOnm/classpath\
PX_SCLASSDIR=d:/PROGRA~1/CSCOpx/lib/classpath\
PX_DATASTORE=DSN=rme\
PX_CLASSPATH=d:/PROGRA~1/CSCOpx/lib/classpath;d:/PROGRA~1/CSCOpx/www/classpath;d:/PROGRA~1/CSCOpx/campus/www/classpath;d:/PROGRA~1/CSCOpx/campus/lib/classpath\
PX_APPDIR=d:/PROGRA~1/CSCOpx/objects\
PX_CONFDIR=d:/PROGRA~1/CSCOpx/conf\
PX_CTRBDIR=d:/PROGRA~1/CSCOpx/contrib\
PX_HLPDIR=d:/PROGRA~1/CSCOpx/help\
PX_LIBDIR=d:/PROGRA~1/CSCOpx/lib\
PX_USER=casuser\
PX_GROUP=casusers\
PX_STOP_DELAY=3000\
PX_SYS_CHECK=1\
PX_OSA_PORT=42342\
OSAGENT_PORT=42342\
PX_HOST=sm01ms002\
PX_FQDN=sm01ms002\
ASANY=d:/PROGRA~1/CSCOpx/objects/db\
SQLANY=d:/PROGRA~1/CSCOpx/objects/db\
CORE_SECURE_PORT=443\
CORE_NONSECURE_PORT=1741\
PX_PROTOCOL=http\
PX_PORT=1741\
PX_WEB_PORT=1741\
MAX_RAM=2048\
MAX_SWAP=4096\
MAX_CPU=1600\
PX_ANI_PORT=42344\
SYS_NO_OF_CPUS=4\
SYS_RAM=4094\
SYS_CPU=2666\
SYS_SWAP=4092\
\f0\ -
We have been buying licences per person, per computer for many years. There has to be a better way to deploy, keep inventory and track user licences. Any suggestions appreciated!
One way is to write a script that collects the GUIDs of the products on all machines. See the Admin Guide. A new way is possible with subscriptions: Cloud technology | Adobe Creative Cloud for small & medium business
hth,
Ben -
Adobe Photoshop Elements 13 will not install on my desktop computer. It does install on my laptop. Both computers are running Windows 8.1 64 bit Pro. What is the solution?
why won't it install? ie, do you see an error message?
if you have no idea, check the installation logs - Troubleshoot with install logs | CS5, CS5.5, CS6, CC -
My internet keeps 'tripping' at or around the same period time each day. We have already replaced our modem from our internet provider and we bought a new airport extreme router. We do not believe these were the cause, although we have now ruled them out as a cause. Everytime the internet fails, our internet provider company tells us that there is still plenty of signal coming into our house. There is something going on inside we believe, and a technician set up our Network Utility to run a continuous ping test to capture information about when it 'trips' againn. Yesterday, it happened again, and when he checked the data out, he said he is sure there is something 'running in the background' on my IMac. He advised me to download a free Network Analyzer so he could further investigate what is was that was causing the problem, so I need a free network analyzer software for my Mac. The issue has been going on for a long time, so it is not the new operating system, Lion. This morning, we changed the radio channel from 'auto' to 'manual' and set a new channel, hoping that might help. We are trying to find out what program may be running (even a tiny one in the background) which is causing our internet to fail, although the internet is still coming into our modem. What is free downloadable product is recommended?
Will Activity Monitor and/or Network Utility, both already in the Utilities folder on your Mac, help in trying to diagnose the problem.
If you are connecting via wifi what encryption are you using? If you're using the Exteme I doubt that you are using WEP, but worth checking as it seems Macs don't like it and work better using WPA. -
Why do I get a message saying "You are running an operating system that InDesign no longer supports. Refer to the system requirements for a full list of supported platforms."? What does this mean?
It means that your machine does not meet the system requirements for InDesign. Check the system requirements for InDesign against those of your machine to see where your machine comes up short.
InDesign - http://helpx.adobe.com/indesign/system-requirements.html -
Configuring When Credit Checks are Run
I am currently trying to find a way to change the points at which credit checks are run. I have stumbled across several documents here on the network about Critical fields etc, but have yet to find anything that explicitly shows how I may change when a credit check is run.
Currently the system is running credit checks automatically at more points than we need, and we are in need of a way to configure when a check is run in the order process or for what specific order types.
If anyone out there can help, it would be greatly appreciated.
ThanksHi Collins,
Pro forma invoice are either order based or delivery based. Do you mean to say you are doing credit check in transaction VF01 or VF04?
For delivered goods Invoice are normally based on delivery. Now whats situation in your case.
Standard credit check works when you create order VA01, Delivery VL01N and at the time of PGI.
What do you mean by both invoice steps? If Customer exceed credit limit Goods should not deliver to him. If once you delivered goods, then there is no use of Credit check.
Do you mean to say you are delivering goods then checking Invoice?
Regards -
How do I find out what applications are running in the background
I have a 2008 iMac with 2GB memory. How do I find out what programs are running in the background? I am going to buy a new iMac before the end of the year to replace this one. When I looked at Activity Monitor it shows 1.8Gb used but doesn't tell all the programs running.
open activity monitor [if it doesnt launch click winders>Activity Monitor]. then it'll show all proceses
-
Check what oracle installed components are actually being used in database
I have been allotted a new database which I have to optimize. So I am thinking about removing some installed components which I think are not being used in any way in database (i.e procedures calls etc). I can see a whole lot of components like "SDO","ORDIM" which I think are not being used but previous DBAs have installed them. So, is there any way to ensure that no part of database are actually using these components so that I can remove these components. Also ,what are your expert comments about this?
Is this a production or a development environment? If an object isn't being used then it's not necessarily a problem (performance wise) unless it's cluttering up either your dictionary or raising concerns in regards consuming unnecessary space. Personally I'd recommend that it's better to tune what is being used / taking resources. It may be a once a year report or some old utility pulled out once a year, best check why these things are there.
If you go down the dropping route, rather than drop anything immediately lock accounts for an agreed period of time to make sure that the schema isn't used & check any references from other schemas to objects within the schema that you're planning to drop, potentially audit these to check whether they're being called by other schemas / checking dba_dependencies between schemas & objects using a hierarchical query to check sublevels.
There are also quite a few Oracle standard components that are installed by default that have interdependencies and won't necessarily be used in the dictionary (checking dba_features_usage_statistics) -
Hi there
I got the following message when trying to install Photoshop CC, "You are running an operating system that Photoshop no longer supports. Refer to the system requirements for a full list of supported platforms."
I use Windows Vista so not sure what I need to do now! Any help would be much appreciated thanks.Photoshop CC only runs on Windows 7 or Windows 8/8.1. Not Vista.
System requirements | Photoshop -
We have 2000 base and advanced license we are running ISE 1.2 , if we upgrade to 1.3 what happens to the license do we need to buy plus/apex license
when you migrate to 1.3 your license will be updated , advance license become plus,apex
-
What system config are you running for xMII 12.1.x?
If you are running xMII 12.1.x, can you please briefly explain your setup? I presume you are running Windows 64-bit, but what kind of processor, how much memory, and how many users? Is the performance/response time good?
Todd,
The documents here on v12.1 performance may be useful as they go into performance numbers, performance monitor log analysis, and NetWeaver CE system settings.
[https://wiki.sdn.sap.com/wiki/display/xMII/Guidelines|https://wiki.sdn.sap.com/wiki/display/xMII/Guidelines]
Hope this helps,
Sam
Maybe you are looking for
-
My phone number no longer shows up when I call a l...
Hi, I paid to have my cell phone number show up when I call a landline. This worked great for a good while (maybe 2 years). It is no longer working. Do I need to renew this feature ? If so, how do I do this. TIA Pat PS hope this is the correct foru
-
Install problems 9i on Linux/390
Hi, firstly, apologies if this is a duplicate post. I'm sure I posted yesterday (7/8/02) but now I cant find the post! I'm attempting to install the developer release of 9i for Linux for S/390 onto Suse SLES7 for S/390. I get to the point where I try
-
is there anything wrong in this code. <body> <cfform name="RunningForm" method="post" action="AddEntry-cfform.cfm"> <table> <tr> <td>Date:</td> <td><cfinput type="text" name="date" size="20"></td> </tr> <tr> <td>Distance:</td> <td><cfinput type="text
-
Help - updatd to 7.3 this morning and getting error
i got the error that 'cannot run because it has detected a problem with your audio configuration' does anyone know what that means and how I fix. I can't get iTunes to open at all anymore.
-
Hi, I've been reading through the posts for awhile now, and have tried all the Apple-recommended solutions to my battery problem (ie resetting it, etc), but nothing is working. I bought my mini brand new on October 1st 2005. Here is my story: - My ba